Chemical Engineering Commons^™

Scale Modeling Of An Appearance Of Downwash Pattern Of Hot Smoke Ejected From Chimney In The Turbulent Cross Flow, Xangpheuak Inthavideth, Nobumasa Sekishita, Sounthisack Phommachanh, Yuji Nakamura

Progress in Scale Modeling, an International Journal

This study aims to elucidate the scaling law to provide the critical condition on appearance of the downwash pattern of the hot smoke ejected from a chimney in a turbulent cross flow. A specially designed wind tunnel with an active turbulence generator developed by Makita was adopted to offer a quasi-isotropic turbulence field in a lab-scale test facility. A heated jet with smoke is issued into the cross flow from the vertically oriented chimney placed in the test section of the wind tunnel. In this study, the experimental parameters considered are temperature of the heated jet (smoke), jet ejected velocity, …

A Cfd-Based Scaling Analysis On Liquid And Paint Droplets Moving Through A Weak Concurrent Airflow Stream, Masoud Arabghahestani, Nelson Akafuah, Tianxiang Li, Kozo Saito

Progress in Scale Modeling, an International Journal

We conducted volume of fluids (VOF) multiphase model numerical simulations to obtain the interaction among all the major governing forces identified in our previous paper. Our numerical experiments are intended to assess the droplet generation process and the jetting behavior by providing specific input conditions, offering CFD as a tool to study scaling correlations instead of physical experiments. Water droplets that can represent waterborne paints were generated by piezo-generated sinusoidal waveforms at the inlet of the nozzle. The governing forces included the external piezo-based wave-generation force, the inertial force of droplets, the inertial force of air, the viscose force of …

Scale Model Equations And Optimization For Annular Flow Of Non-Newtonian Fluids Between Eccentric And Rotating Cylinders, Wei Zhang, Pooya Khodaparast, Amin Mehrabian Dr., Amir Shojaei

Progress in Scale Modeling, an International Journal

A broad range of engineering applications involves helical flow of non-Newtonian fluids between two eccentric cylinders. These applications often require estimation of the frictional pressure losses along the axes of the cylinders. Laboratory flow loops are commonly used to study the flow characteristics at smaller scales of investigation. This study uses the laws of similarity and dimensional analysis to obtain a set of scaling equations between the laboratory and prototype scales of the described annular flow. These equations are derived for four types of fluid rheology including Newtonian, power-law, Bingham-plastic, and yield power-law.

Results are expressed through a set of …

Open-Field Scale-Model Experiments Of Fire Whirls Over L-Shaped Line Fires, Yuto Iga, Kazunori Kuwana, Kozo Sekimoto, Yuji Nakamura

Progress in Scale Modeling, an International Journal

This paper presents the results of open-field scale-model experiments of fire-whirl formation over line fires. L-shaped line fires were burned in crosswinds, and the processes of fire-whirl formation were observed. The flame height was measured using an image-processing technique, while two-dimensional velocity components were measured at two different locations using ultrasonic anemometers. Two tests were selected for comparison: test A, in which intense fire whirls repeatedly formed, and test B, in which no whirls were observed. In test A, the wind flow was bent by the fire plume, creating swirling flows near the burning area, thereby forming fire whirls. On …

Effects Of Dimensionless Numbers On Decomposition Of Methane Hydrate, Shoma Shimizu, Genichiro Kushida

Progress in Scale Modeling, an International Journal

It is necessary to elucidate the decomposition and combustion of methane hydrate for fire safety during transportation and storage to utilize it for commercial practice. The amount of methane evolved during the decomposition of methane hydrates is affected by the conditions such as the initial temperature, initial density and ambient temperature. In the present study, the internal temperature of methane hydrate and the amount of methane evolved during its decomposition were investigated by a dimensionless numerical analysis using a transient one-dimensional conduction model from a symmetrical methane hydrate ball heated by ambient air. The numerically calculated central temperature and the …

A Study On Fire Hazards Of Oil Tanks In Urban Areas With Scale Model Experiments, Ho Yin Ng, Yu Wan, Wan Ki Chow

Progress in Scale Modeling, an International Journal

Large fuel tanks are located in an urban area of Tsing Yi in Hong Kong, giving potentially high risks to people living nearby if a fire was to occur. Scale modeling experiments were carried out to investigate the potential of fire hazards. Propanol pool fires with five different scales of oil tanks were studied first. Appropriate tank sizes were then put in a 1/2500 architectural scale model on the Tsing Yi Island to study a fuel tank fire. Results show that the heat and smoke from a fire would affect occupants staying in areas near to the fuel tanks. Fire …

Fingering Behavior Of Flame Spread Over Solid Combustibles, Tsuneyoshi Matsuoka, Kentaro Nakashima, Takuma Kajimoto, Akihiro Yoshimasa, Yuji Nakamura

Progress in Scale Modeling, an International Journal

In this study, the fingering pattern formation and the following flamelet spreading over three different kinds of thick combustibles, i.e., Poly methacrylate (PMMA), Poly ethylene (PE) and Poly carbonate (PC) were observed and the effective Lewis number correlation was validated. Experiments were performed with a narrow channel apparatus. In addition to the kinds of solid fuel materials, the channel height and the oxidizer velocity were varied as experimental parameters. An image analysis method was developed to quantify the number, diameter and spread rate of the flamelets. Replacing the fuel thickness into the thermal thickness, the effective Lewis number which is …

Data-Driven Tools Guided By First-Principles For Scale Modeling, Sadegh Poozesh

Progress in Scale Modeling, an International Journal

For decades, traditional scale-modeling techniques have been relying on first-principles models (FPMs). FPMs have been used to find non-dimensional numbers (PIs) and identify normalized underlying forces and energies behind the phenomenon in focus. The two main challenges with FPM-based PIs extraction are finding the relevant PIs and proper correlations between PIs. The emergence and surge of data-driven modeling (DDM) provide a new opportunity to leverage experimental data in model development across scales/plants. In this paper, first, the two mentioned issues in PIs development will be elaborated to reveal the gap, and second, a new insight into scale modeling and similarity …

Scaling Realistic Fire Scenarios, James G. Quintiere

Progress in Scale Modeling, an International Journal

A review is made of work on scale modeling in fire and presented from the experience of the author. Primarily, scale modeling in air is discussed but there is a brief discussion of a scale model with salt and fresh water for smoke movement. A complete set of dimensionless groups is presented for fire, then it is illustrated how selections were made for the partial scaling of specific fire scenarios. Studies have been motivated by basic research interests as well as for fire investigations. The dynamics of floorcovering fire spread in a corridor is studied to reveal many features of …