Open Access. Powered by Scholars. Published by Universities.®
- Discipline
- Keyword
-
- : biodiesel; ductile cast iron; solid waste; MgO; response surface methodology; optimization (1)
- Biodiesel; Sanitary ware waste; CaO; Response surface methodology; Optimization (1)
- Biodiesel; castor oil; simulation; yield; transesterification (1)
- Biodiesel; solvay wastewater; CaO; response surface methodology; optimization (1)
- Co-electrodeposition; Fuel cells; Pt-Cu; Catalyst poisoning; Formic acid (1)
-
- EAFD; Cement Dust; Leaching; Pyro/hydrometallurgical Process; Zn Recovery (1)
- Electric arc furnace slag; biodiesel; optimization; response surface methodology (1)
- Fuel cells; Electrocatalysis; Methanol electro-oxidation; Formic acid electro-oxidation; Ethylene glycol electro-oxidation (1)
- Pd-Au; Co-electrodeposition; Fuel Cells; Formic acid oxidation; Poisoning (1)
- Poisoning; Formic acid; Cobalt oxide; Gold; Platinum; Fuel cells (1)
Articles 1 - 16 of 16
Full-Text Articles in Chemical Engineering
Augmented Formic Acid Electro-Oxidation At A Co-Electrodeposited Pd/Au Nanoparticle Catalyst, Yaser M. Asal, Ahmad M. Mohammad, Sayed S. Abd El Rehim, Islam M. Al-Akraa
Augmented Formic Acid Electro-Oxidation At A Co-Electrodeposited Pd/Au Nanoparticle Catalyst, Yaser M. Asal, Ahmad M. Mohammad, Sayed S. Abd El Rehim, Islam M. Al-Akraa
Chemical Engineering
In this study, the formic acid electro-oxidation reaction (FAEOR) was catalyzed on a Pd-Au co-electrodeposited binary catalyst. The kinetics of FAEOR were intensively impacted by changing the Pd2+:Au3+ molar ratio in the deposition medium. The Pd1-Au1 catalyst (for which the Pd2+:Au3+ molar ratio was 1:1) acquired the highest activity with a peak current density for the direct FAEOR (Ip) of 4.14 mA cm−2 (ca. 13- times higher than that (ca. 0.33 mA cm−2) of the pristine Pd1-Au0 catalyst). It also retained the highest stability that was denoted in fulfilling ca. 0.292 mA cm−2 (ca. 19-times higher than 0.015 …
Optimum Biodiesel Production Using Ductile Cast Iron As A Heterogeneous Catalyst, Nada Amr El-Khashab, Marwa Mohamed Naeem, Mai H. Roushdy
Optimum Biodiesel Production Using Ductile Cast Iron As A Heterogeneous Catalyst, Nada Amr El-Khashab, Marwa Mohamed Naeem, Mai H. Roushdy
Chemical Engineering
Biofuels production become a target for many researchers nowadays. Biodiesel is one the most important biofuels that are produced from biomass using economics and modern techniques. The ductile cast iron solid waste dust is one of the wastes produced by the cast iron industry which has a bad effect on the environment. This paper investigates the possibility of reusing ductile cast iron solid waste as a biodiesel heterogeneous catalyst used in its production from sunflower waste cooking oil. Four reaction parameters were chosen to determine their effect on the reaction responses. The reaction parameters are M:O ratio, reaction time and …
Surface Engineering Of Pt Surfaces With Au And Cobalt Oxide Nanostructures For Enhanced Formic Acid Electro-Oxidation, Yaser M. Asal, Islam M. Al-Akraa, Ahmad M. Mohammad
Surface Engineering Of Pt Surfaces With Au And Cobalt Oxide Nanostructures For Enhanced Formic Acid Electro-Oxidation, Yaser M. Asal, Islam M. Al-Akraa, Ahmad M. Mohammad
Chemical Engineering
This study aims to mitigate the CO poisoning of platinum (Pt) surfaces during formic acid electro-oxidation (FAEO), the essential anodic reaction in the direct formic acid fuel cells (DFAFCs). For this purpose, a glassy carbon (GC) electrode was amended sequentially with Pt (n-Pt), gold (n-Au), and cobalt oxide (n-CoOx) nanostructures. Fascinatingly, the ternary modified n-CoOx/n-Au/n-Pt/GC catalyst (for which n-Pt, n-Au, and n-CoOx were sequentially and respectively assembled onto the GC surface) exhibited a remarkable electrocatalytic enhancement toward FAEO, which surpassed ca. 53 times that of the Pt/GC catalyst. Additionally, it exhibited a much (ca. 18 times) higher stability after 3000 …
Sanitary Ware Waste As A Source For A Valuable Biodiesel Catalyst, Mai H. Roushdy
Sanitary Ware Waste As A Source For A Valuable Biodiesel Catalyst, Mai H. Roushdy
Chemical Engineering
Biofuel is a type of fuel that is made from biomass using modern techniques rather than the relatively slow geological processes that lead to the development of fossil fuels. In Europe, biodiesel is the most widely used biofuel. The sanitary ware industry generates a lot of hazardous waste, such as waste gypsum molds. These molds are broken, pulverized, and reacted with NaCO3 to make CaCO3, which is then heated to produce CaO. The resulting CaO catalyzes the reaction between waste frying oil and methanol for biodiesel synthesis. To evaluate the effect of reaction parameters on the production of biodiesel, the …
Effect Of Palladium Loading On Catalytic Properties Of Pd/Gce For The Electro-Oxidation Of Methanol, Formic Acid, And Ethylene Glycol, Islam M. Al-Akraa, Yaser M. Asal, Sohir A. Darwish, Rafik M. Fikry, Reem H. Mahmoud, Mohamed Hassan, Ahmad M. Mohammad
Effect Of Palladium Loading On Catalytic Properties Of Pd/Gce For The Electro-Oxidation Of Methanol, Formic Acid, And Ethylene Glycol, Islam M. Al-Akraa, Yaser M. Asal, Sohir A. Darwish, Rafik M. Fikry, Reem H. Mahmoud, Mohamed Hassan, Ahmad M. Mohammad
Chemical Engineering
This study investigates the influence of the catalyst (Palladium, Pd) mass that loaded onto a glassy carbon electrode (GCE) on the catalytic activity of methanol (MEO), formic acid (FAEO), and ethylene glycol (EGEO) electro-oxidation, the corresponding principal anodic reactions in the direct methanol (DMFCs), formic acid (DFAFCs), and ethylene glycol (DEGFCs) fuel cells, respectively. By increasing the Pd loading at 0.1 V, the Pd surface area increased from 0.55 cm2 (2 min Pd deposition) to 1.94 cm2 (25 min Pd deposition) which increased the peak currents (IP) of MEO (from 0.181 to 0.608 mA), FAEO (from 0.236 to …
A Competent Mwcnt-Grafted Mnox/Pt Nanoanode For The Direct Formic Acid Fuel Cells, Islam M. Al-Akraa, Mamdouh M. Moutaz, Ahmad M. Mohammad, Yaser M. Asal
A Competent Mwcnt-Grafted Mnox/Pt Nanoanode For The Direct Formic Acid Fuel Cells, Islam M. Al-Akraa, Mamdouh M. Moutaz, Ahmad M. Mohammad, Yaser M. Asal
Chemical Engineering
A novel “MnOx/Pt/MWCNT-GC” nanocatalyst is recommended for the electrooxidation of formic acid (EOFA), the principal anodic reaction in the direct formic acid fuel cells (DFAFCs). The sequential (layer-by-layer) protocol was employed to prepare the catalyst through the electrodeposition of Pt (nano-Pt) and manganese oxide (nano-MnOx) nanoparticles onto the surface of a glassy carbon (GC) electrode supported with multiwalled carbon nanotubes (MWCNTs). The nano-MnOx could successfully mediate the mechanism of EOFA by accelerating the charge transfer, “electronic effect”. On the other hand, MWCNTs could enhance the catalytic performance by changing the surface geometry that inhibited the adsorption of poisoning CO, which …
Synergistic Enhancement Of Formic Acid Electro-Oxidation On Ptxcuy Co-Electrodeposited Binary Catalysts, Yaser M. Asal, Ahmad M. Mohammad, Sayed S. Abd El Rehim, Islam M. Al-Akraa
Synergistic Enhancement Of Formic Acid Electro-Oxidation On Ptxcuy Co-Electrodeposited Binary Catalysts, Yaser M. Asal, Ahmad M. Mohammad, Sayed S. Abd El Rehim, Islam M. Al-Akraa
Chemical Engineering
A propitious binary catalyst composed of Pt and Cu which were electrodeposited simultaneously onto a glassy carbon (GC) substrate was recommended for the formic acid (FA) electro-oxidation reaction (FAOR); the principal anodic reaction in the direct FA fuel cells (DFAFCs). The simultaneous co-electrodeposition of Pt and Cu in the catalyst provided an opportunity to tune the geometric functionality of the catalyst to resist the adsorption of poisoning CO at the Pt surface that represented the major impediment for DFAFCs marketing. The catalytic activity of the catalyst toward FAOR was significantly influenced by the (Pt4+/Cu2+) molar ratio of the electrolyte during …
Heterogeneous Biodiesel Catalyst From Steel Slag Resulting From An Electric Arc Furnace, Mai H. Roushdy
Heterogeneous Biodiesel Catalyst From Steel Slag Resulting From An Electric Arc Furnace, Mai H. Roushdy
Chemical Engineering
Biodiesel is one of the most environmentally friendly and renewable fuels, as it is a non-polluting fuel and is made from living resources, such as vegetable oils. The steel industry generates a variety of solid wastes, including electric arc furnace slag (EAFS). The synthesis of biodiesel from waste sunflower cooking oil was examined in this study, utilizing EAFS as a catalyst, which mainly contains ferric and ferrous oxides, calcium oxide, and silica. To evaluate their impact on biodiesel production, four independent variables were chosen: temperature (50–70 ◦C), catalyst loading (1–5%), methanol-to-oil (M:O) molar ratio (5–20), and time (1–4 h). The …
A Competent Mwcnt-Grafted Mnox/Pt Nanoanode For The Direct Formic Acid Fuel Cells, Islam M. Al-Akraa, Moutaz M. Mamdouh, Yaser M. Asal, Ahmad M. Mohammad
A Competent Mwcnt-Grafted Mnox/Pt Nanoanode For The Direct Formic Acid Fuel Cells, Islam M. Al-Akraa, Moutaz M. Mamdouh, Yaser M. Asal, Ahmad M. Mohammad
Chemical Engineering
No abstract provided.
Effect Of Palladium Loading On Catalytic Properties Of Pd/Gce For The Electro-Oxidation Of Methanol, Formic Acid, And Ethylene Glycol, Islam M. Al-Akraa
Effect Of Palladium Loading On Catalytic Properties Of Pd/Gce For The Electro-Oxidation Of Methanol, Formic Acid, And Ethylene Glycol, Islam M. Al-Akraa
Chemical Engineering
No abstract provided.
Biodiesel Production From Castor Oil: Mixing Optimization During Transestrification, Islam M. Al-Akraa
Biodiesel Production From Castor Oil: Mixing Optimization During Transestrification, Islam M. Al-Akraa
Chemical Engineering
No abstract provided.
Castor Oil Conversion To Biodiesel: A Process Simulation Study, Islam M. Al-Akraa
Castor Oil Conversion To Biodiesel: A Process Simulation Study, Islam M. Al-Akraa
Chemical Engineering
No abstract provided.
A Competent Mwcnt-Grafted Mnox/Pt Nanoanode For The Direct Formic Acid Fuel Cells, Islam M. Al-Akraa, Ahmad M. Mohammad, Moutaz Mamdouh, Yasser M. Asal
A Competent Mwcnt-Grafted Mnox/Pt Nanoanode For The Direct Formic Acid Fuel Cells, Islam M. Al-Akraa, Ahmad M. Mohammad, Moutaz Mamdouh, Yasser M. Asal
Chemical Engineering
No abstract provided.
Hybrid Hydro-Pyrometallurgical Process For Zn Recovery From Electric Arc Furnace Dust, Rana Adel Bayoumi, Nabil Mahmoud Abdelmenem, Moustafa Aly Soliman, Ibrahim Mohamed Ismail, Ahmed Ahmed Refaat
Hybrid Hydro-Pyrometallurgical Process For Zn Recovery From Electric Arc Furnace Dust, Rana Adel Bayoumi, Nabil Mahmoud Abdelmenem, Moustafa Aly Soliman, Ibrahim Mohamed Ismail, Ahmed Ahmed Refaat
Chemical Engineering
Electric arc furnace dust (EAFD) which is considered hazardous waste, contains significant amounts of Zinc (Zn), iron (Fe), and some dangerous elements. Zn exists in the dust as Zinc Oxide (ZnO) and Zinc Ferrite (ZnFe2O3) which is difficult to be leached with traditional methods. The main objective of the suggested process is to recover Zn from EAFD by using a hybrid pyro/hydrometallurgical method. This method includes mixing cement dust and EAFD and heating the mixture in a pyrometallurgical treatment step to convert ZnFe2O3 to ZnO. This step is followed by leaching the treated dust with sodium hydroxide (NaOH) solution using …
Valuable Biodiesel Catalyst From Solvay Wastewater, Mai Hassan Roushdy, Rana Adel Bayoumi
Valuable Biodiesel Catalyst From Solvay Wastewater, Mai Hassan Roushdy, Rana Adel Bayoumi
Chemical Engineering
Biodiesel is considered a renewable, green fuel as it is derived from renewable living resources like animal fats or vegetable oils. This research is utilized to investigate the possibility of using Solvay wastewater as a source of biodiesel catalyst, which is CaO. CaCl2 from Solvay wastewater reacts with CO2 to produce CaCO3. CaCO3 is then heated to produce pure CaO. Waste cooking oil, wastewater, and CO2, which are considered dangerous materials to the environment, are used to produce valuable products. This research has environmental and economic benefit benefits of using waste materials as a replacement for raw materials. The selected …
Castor Oil Conversion To Biodiesel: A Process Simulation Study, Islam M. Al-Akraa, Ahmad M. Mohammad, Yaser M. Asal, Razan Aymen
Castor Oil Conversion To Biodiesel: A Process Simulation Study, Islam M. Al-Akraa, Ahmad M. Mohammad, Yaser M. Asal, Razan Aymen
Chemical Engineering
The aim of this study is to highlights the importance to shift from the use of traditional fossil fuels to biodiesel as a clean energy source. A simulation study has been conducted using ASPEN HYSIS software for the biodiesel production form castor oil. The simulation was run and the properties of the produced biodiesel were highlighted. The optimum conditions resulted in 88 % conversion.