Bioresource and Agricultural Engineering Commons^™

Effect Of Different Extrusion Processing Parameters On Physical Properties Of Soy White Flakes And High Protein Distillers Dried Grains-Based Extruded Aquafeeds, Sushil Kumar Singh, Kasiviswanathan Muthukumarappan

Sushil Singh

Nutritionally balanced ingredient blends for catla (Catla catla), belonging to the family Cyprinidae, were extruded using single screw extruder. The extrusion was carried out at five levels of soy white flakes content (21%, 29%, 40%, 52%, and 59% db), five levels of moisture content (15, 19, 25, 31, and 35% db) and five levels of barrel temperature (100, 110, 125, 140, and 150 ºC) using three different die nozzles (having L/D ratios 3.33, 5.83, and 7.25). Blends with net protein content of 32.5% contains soy white flakes, along with high protein distillers dried grains (HP-DDG), corn flour, corn gluten meal, …

Understanding The Effect Of Extrusion Processing Parameters On Physical, Nutritional And Rheological Properties Of Soy White Flakes Based Aquafeed In A Single Screw Extruder, Sushil Kumar Singh

Sushil Singh

The rapid expansion of aquaculture has increased the demand for aquafeed. As fishmeal is expensive, alternative plant based protein sources such as soybean has shown to be a good alternative for aquafeed production. The present study was done to investigate the effect of soy white flakes (SWF) as an alternative source of protein in the production of aquaculture feed through extrusion processing. Ingredient blends containing different levels of SWF along with distiller dried grains, corn flour, corn gluten meal, fish meal, vitamin and mineral mix with net protein adjusted to 32% protein were formulated. The ingredient blends were extruded in …

Influence Of Processing Conditions On Apparent Viscosity And System Parameters During Extrusion Of Distiller’S Dried Grains-Based Snacks, Poonam Singha, Kasiviswanathan Muthukumarappan, Padmanaban Krishnan

POONAM SINGHA

Influence Of Processing Conditions On Apparent Viscosity And System Parameters During Extrusion Of Distiller’S Dried Grains-Based Snacks, Poonam Singha, Kasiviswanathan Muthukumarappan, Padmanaban Krishnan

Padmanaban Krishnan

Twin-Screw Extrusion Processing Of Distillers Dried Grains With Solubles (Ddgs)-Based Yellow Perch (Perca Flavescens) Feeds, Ferouz Y. Ayadi, Kurt A. Rosentrater, Kasiviswanathan Muthukumarappan, Michael L. Brown

Kurt A. Rosentrater

Increases in global aquaculture production, compounded with limited availabilities of fish meal for fish feed, has created the need for alternative protein sources. Twin-screw extrusion studies were performed to investigate the production of nutritionally balanced feeds for juvenile yellow perch (Perca flavescens). Five isocaloric (~3.06 kcal/g) ingredient blends, adjusted to a target protein content of 36.7% db, were formulated with 0%, 10%, 20%, 30%, and 40% distillers dried grains with solubles (DDGS) at an initial moisture content of 5–7% db, with appropriate amounts of fish meal, fish oil, whole wheat flour, corn gluten meal, and vitamin and mineral premixes. During …

Single-Screw Extrusion Modeling Effects On Extrusion Processing Parameters And Physical Properties Of Ddgs-Based Nile Tilapia ( Oreochromis Niloticus ) Feeds, Ferouz Y. Ayadi, Parisa Fallahi, Kurt A. Rosentrater, Kasiviswanathan Muthukumarappan

Kurt A. Rosentrater

A single-screw laboratory extruder was used to conduct an L 18 (2 2 X 3 6 ) Taguchi fractional factorial study of aquafeed processing. The ingredients were based on a formulation for nutritionally-balanced Nile tilapia diets containing distillers dried grains with solubles (DDGS) and soybean meal as the main protein sources, in addition to constant amounts of corn flour, whey, and fish meal. The effects of three levels of DDGS (20, 30 and 40%), soybean meal (30, 40 and 50%), ingredient moisture content (20, 30 and 40% db), screw speed (100, 150 and 200 rpm), barrel temperatures (80-100-100°C, 80-120-120°C and …

Twin-Screw Extrusion Processing Of Distillers Dried Grains With Solubles (Ddgs)-Based Yellow Perch (Perca Flavescens) Feeds, Ferouz Y. Ayadi, Kurt A. Rosentrater, Kasiviswanathan Muthukumarappan, Michael L. Brown

Kurt A. Rosentrater

Due to tremendous increases in global aquaculture production, compounded with limited availabilities of fish meal for fish feed, the need for alternative protein sources cannot be disregarded. Toward that end, twin-screw extrusion studies were performed to investigate the production of nutritionally-balanced feeds for juvenile yellow perch (Perca flavescens). Five isocaloric (~ 3.06 kcal/g) ingredient blends, adjusted to a similar protein content of 36.7% db, were formulated with 0, 10, 20, 30, and 40% distillers dried grains with solubles (DDGS) at an initial moisture content of 5-7% db, with appropriate amounts of fish meal, fish oil, whole wheat flour, corn gluten …

Twin-Screw Extrusion Processing Of Distillers Dried Grains With Solubles (Ddgs)-Based Rainbow Trout (Oncorhynchus Mykiss) Feeds, Ferouz Y. Ayadi, Kasiviswanathan Muthukumarappan, Kurt A. Rosentrater, Michael L. Brown

Kurt A. Rosentrater

The world’s increasing demand for seafood products has resulted in rising demands for fish meal for fish feed, which must be compensated for by searching for effective alternative protein sources. In this study, twin-screw extrusion trials were conducted to study the production of nutritionally-balanced feeds for rainbow trout fingerlings (Oncorhynchus mykiss). Six isocaloric (~ 4.61 kcal/g) ingredient blends with a similar protein content of 52.8% db were formulated with 0, 10, 20, 30, 40 and 50% distillers dried grains with solubles (DDGS) and other ingredients (i.e. fish meal, fish oil, whole wheat flour, corn gluten meal, and vitamin and mineral …

Extrusion Studies Of Aquaculture Feed Using Distillers Dried Grains With Solubles And Whey, Nehru Chevanan, Kasiviswanathan Muthukumarappan, Kurt A. Rosentrater

Kurt A. Rosentrater

Three isocaloric (3.5 kcal/g) ingredient blends containing 20, 30, and 40% distiller-dried grains with solubles (DDGS) along with 5% whey were prepared with a net protein content adjusted to 28% (wet basis [wb]). Other ingredients in the blends included soy flour, corn flour, fish meal, vitamin, and mineral mix. These blends were extruded in a single-screw extruder at 15, 20, and 25% (wb) moisture content and at 130 and 160 rpm screw speeds. Compared to previous research, the durability and unit density of the extrudates in this study were found to increase substantially by the addition of whey to the …

Effects Of Ingredients And Extrusion Parameters On Properties Of Aquafeeds Containing Ddgs And Corn Starch, Kurt A. Rosentrater, Kasiviswanathan Muthukumarappan, S. Kannadhason

Kurt A. Rosentrater

Isocaloric (3.05 kcal g-1) ingredient blends were factorially formulated using 3 levels each of DDGS (20, 25 and 30% db), protein (30, 32.5 and 35% db) and feed moisture content (25, 35 and 45% db), along with appropriate quantities of corn starch, soybean meal, fish meal, whey, vitamin and mineral mix to produce a balanced diet for tilapia feed. The ingredient blends were extruded using a laboratory-scale single screw extruder with varying screw speeds (100, 150 and 200 rpm) and extruder barrel temperatures (100, 125 and 150°C). The resulting extrudates were subjected to extensive analyses of physical properties, which included …

Effects Of Ingredients And Extrusion Parameters On Aquafeeds Containing Ddgs And Tapioca Starch, S. Kannadhason, Kasiviswanathan Muthukumarappan, Kurt A. Rosentrater

Kurt A. Rosentrater

Isocaloric (3.05 kcal g-1) ingredient blends were factorially formulated using three levels each of DDGS (20, 25 and 30% db), protein (30, 32.5 and 35% db) and feed moisture content (25, 35 and 45% db), along with appropriate quantities of tapioca starch, soybean meal, fish meal, whey, vitamin and mineral mix to produce a balanced diet for tilapia feed. The ingredient blends were extruded using a laboratory-scale single screw extruder with varying screw speeds (100, 150 and 200 rpm) and extruder barrel temperatures (100, 125 and 150°C). The resulting extrudates were subjected to extensive analyses of physical properties, which included …

Effects Of Ingredients And Extrusion Parameters On Aquafeeds Containing Ddgs And Potato Starch, Kurt A. Rosentrater, Kasiviswanathan Muthukumarappan, S. Kannadhason

Kurt A. Rosentrater

Isocaloric (3.05 kcal g-1) ingredient blends were factorially formulated using three levels each of DDGS (20, 25 and 30% db), protein (30, 32.5 and 35% db) and feed moisture content (25, 35 and 45% db), along with appropriate quantities of potato starch, soybean meal, fish meal, whey, vitamin and mineral mix to produce a balanced diet for tilapia feed. The ingredient blends were extruded using a laboratory-scale single screw extruder with varying screw speeds (100, 150 and 200 rpm) and extruder barrel temperatures (100, 125 and 150°C). The resulting extrudates were subjected to extensive analyses of physical properties, which included …

Effects Of Feed And Extruder Parameters On Extrudates Containing Ddgs, S. Kannadhason, Kasiviswanathan Muthukumarappan, Kurt A. Rosentrater

Kurt A. Rosentrater

Twenty seven isocaloric (3.05 kcal/g) ingredient blends were factorially formulated using three levels each of DDGS (20, 25, and 30% db), protein (30, 32.5, and 35% db), and feed moisture content (25, 35, and 45% db), along with appropriate quantities of cassava starch, soybean meal, fish meal, whey, vitamin, and mineral mix to produce a balanced diet for tilapia feed. The ingredient blends were extruded using a laboratory-scale single screw extruder with varying screw speeds (100, 150, and 200 rpm) and extruder barrel temperatures (100, 125, and 150 o C). The resulting extrudates were subjected to extensive analyses of physical …

Neural Network And Regression Modeling Of Extrusion Processing Parameters And Properties Of Extrudates Containing Ddgs, Nehru Chevanan, Kasiviswanathan Muthukumarappan, Kurt A. Rosentrater

Kurt A. Rosentrater

Two sets of experiments using a single-screw extruder were conducted with an ingredient blend containing 40% DDGS (distillers dried grains with solubles), along with soy flour, corn flour, fish meal, vitamin mix, and mineral mix, with the net protein content adjusted to 28%. The variables controlled in the first experiment included seven levels of die size, three levels of moisture content, three levels of temperature gradient in the barrel, and one screw speed. The variables altered in the second experiment included three levels of moisture content, three levels of temperature gradient in the barrel, five levels of screw speed, and …

Utilization Of Distillers Dried Grains For Fish Feed By Extrusion Technology—A Review, Nehru Chevanan, Kurt A. Rosentrater, Kasiviswanathan Muthukumarappan

Kurt A. Rosentrater

Protein-rich distillers dried grains (DDG) from ethanol plants has been used as livestock feed for many years. Feed conversion efficiency in fish, however, is typically much higher compared to traditional livestock. But, the cost of fish feed is one of the challenges for profitable fish cultivation. Due to the exponential growth of ethanol plants in recent years, DDG is becoming readily available as a reasonably-priced base material for animal feeds, and because it has a relatively high protein content, it also has much potential for use as a fish feed ingredient. Even though much literature is available on conversion of …