Open Access. Powered by Scholars. Published by Universities.®
Biomedical Engineering and Bioengineering Commons™
Open Access. Powered by Scholars. Published by Universities.®
- Discipline
- Keyword
-
- Temperature (4)
- Absorber (2)
- Analysis (2)
- Cleaning (2)
- Diffusion (2)
-
- 3D Surface Profiles (1)
- : acrylic acid (1)
- Adsorption (1)
- Advanced manufacturing processes (1)
- Agriculture (1)
- Air temperature (1)
- Air velocity (1)
- Alternative raw materials (1)
- Approach (1)
- Asphalt (1)
- Automated control system (1)
- Automation (1)
- Autotransformers (1)
- Bashkortostan (1)
- CGAN-HQOA (1)
- Calcic chernozem (1)
- Capacitive transducer (1)
- Chalcopyrite (1)
- Circulating water (1)
- Combined (1)
- Composition (1)
- Constants. (1)
- Consumption (1)
- Contour Plots (1)
- Convective drying (1)
Articles 1 - 30 of 34
Full-Text Articles in Biomedical Engineering and Bioengineering
Theory Of Development And Improvement Of The Mathematical Model Of The Methodology Of Public Control In The Management Of Occupational Safety And Industrial Risks, Aliakbar Khamidullaevich Rasulev, Sunnatilla Suleymanovich Suleymanov, Nodira Bakhadirzhanovna Gaibnazarova
Theory Of Development And Improvement Of The Mathematical Model Of The Methodology Of Public Control In The Management Of Occupational Safety And Industrial Risks, Aliakbar Khamidullaevich Rasulev, Sunnatilla Suleymanovich Suleymanov, Nodira Bakhadirzhanovna Gaibnazarova
Technical science and innovation
The article develops and analyzes a mathematical model based on a logical flowchart of the methodology of public control in the management of occupational safety and industrial risks and probability theory, according to the model, the results of compliance with the requirements of social cooperation on occupational safety lead to a sharp increase in the probability of reliability, management efficiency becomes higher. Analysis of the mathematical model of the developed logical flowchart based on probability theory has shown that when the parties cooperate to monitor the results of compliance with labor protection requirements, they lead to a sharp increase in …
Solving Water Resources Problems - Water Saving In The Republic Of Uzbekistan, Rustam Muxammatdjanovich Raximov
Solving Water Resources Problems - Water Saving In The Republic Of Uzbekistan, Rustam Muxammatdjanovich Raximov
Technical science and innovation
In this article we will talk about the problems of water resources in the Republic of Uzbekistan. The problem of drinking water supply, solutions to provide drinking water to the population of Uzbekistan. The largest consumers of fresh water in Uzbekistan are farmers. Due to outdated infrastructure, 40% of water is wasted. Rising food prices and the risk of spreading disease are the first signs of water shortages that we may experience in the coming еars. Uzbekcosmos told how to solve the problem. Water is an invaluable resource used not only in the home, but also in the production and …
Selective Oxidation Of Iron In Chalcopyrite For Enhanced Copper Recovery, Khojiakbar Shuxrat O'G'Li Sultonov, Shokhrukh Toshpulatovich Khojiev, Gulnoza Berdiyor Qizi Beknazarova, Malika Sayfullayevna Saidova
Selective Oxidation Of Iron In Chalcopyrite For Enhanced Copper Recovery, Khojiakbar Shuxrat O'G'Li Sultonov, Shokhrukh Toshpulatovich Khojiev, Gulnoza Berdiyor Qizi Beknazarova, Malika Sayfullayevna Saidova
Technical science and innovation
This study explores the thermodynamic feasibility of selectively oxidizing iron contained in chalcopyrite mineral while preventing the oxidation of copper sulphide, with the ultimate goal of enhancing the copper concentration in the sulphide concentrate. A redox reaction in the solid phases between chalcopyrite and copper (I) oxide was constructed and subjected to thermodynamic analysis. The research identifies a crucial temperature range of 498-598 K (225-325 °C) as the most favourable for the redox reaction. The equilibrium constants at the selected optimal temperatures, 1.152 for chalcopyrite and 1.137 for copper (I) oxide, indicate that the redox reaction adheres to the expected …
Modelling Of Heat Transfer In An Air Solar Collector, Shakhnoza Abduvaxitovna Sultanova, Jasur Esirgapovich Safarov, A.A. Mambetsheripova
Modelling Of Heat Transfer In An Air Solar Collector, Shakhnoza Abduvaxitovna Sultanova, Jasur Esirgapovich Safarov, A.A. Mambetsheripova
Technical science and innovation
This study is the prediction, depending on time and different geographical and climatic situations, of different operating parameters: solar radiation, ambient and outlet coolant temperature, heat exchange coefficients and losses. All these determine, in the absence of measurements, the efficiency of the system modelled with existing models with respect to these parameters. These models are usually compared with experimental results. Before modelling, it is necessary to investigate the different heat transfer and exchange regimes that exist between the different elements of this system in order to eventually have a system of equations governing this exchange. The modelling principle is to …
Implementing A Solar Photovoltaic Station In Watering Systems Utilizing Complex Software, Akbarxon Sarvar O'G'Li Uroqov, Faxriddin Jaylovovich Nosirov, G'Olibjon Pardayevich Arzikulov, Zarina Amriddin Qizi Sayfutdinova
Implementing A Solar Photovoltaic Station In Watering Systems Utilizing Complex Software, Akbarxon Sarvar O'G'Li Uroqov, Faxriddin Jaylovovich Nosirov, G'Olibjon Pardayevich Arzikulov, Zarina Amriddin Qizi Sayfutdinova
Technical science and innovation
This article explores the benefits of transitioning from traditional agricultural irrigation systems to more cost-effective alternatives powered by renewable energy sources. By integrating solar photovoltaic technology into irrigation processes, significant reductions in resource wastage, estimated at 45-50%, are achievable through the implementation of drip irrigation techniques. This results in enhanced agricultural productivity. Moreover, the utilization of solar panels in green zones mitigates surface temperature increases, contributing to a 2-5% boost in electricity production. Currently, irrigation facilities primarily rely on the main energy grid. However, transitioning to renewable energy sources decreases reliance on non-renewable fuels, reduces greenhouse gas emissions, and fosters …
Research Of The Influence Of Dust On Photovoltaic Modules, Anvarjon Mirolimov, Xalmurat Iliev
Research Of The Influence Of Dust On Photovoltaic Modules, Anvarjon Mirolimov, Xalmurat Iliev
Technical science and innovation
The influence of dust concentrations on the current-voltage characteristics (voltampere characteristics) of photovoltaic modules (PVM) based on crystalline silicon in laboratory conditions. It was investigated how an uncleaned panel affects the output power. The tests were carried out in the city of Tashkent on the territory of the “National Research Institute of Renewable Energy Sources”. The objects were located co-plurally as specified in GOST R 60904-1 Photoelectric devices. Part 1. Measurement of current-voltage characteristics. Measurements of a cleaned photovoltaic module with a maximum power of 330 W and not a cleaned one of 236 W were obtained. Based on the …
Use Of Mathematical Skills For Technical Condition Assessment Of Power Autotransformers, Dilafruz Rustamjon Qizi Abdullabekova, Nurali Berdiyorovich Pirmatov
Use Of Mathematical Skills For Technical Condition Assessment Of Power Autotransformers, Dilafruz Rustamjon Qizi Abdullabekova, Nurali Berdiyorovich Pirmatov
Technical science and innovation
In this paper, we review innovative approaches to assess the technical condition of autotransformers using mathematical methods. The main purpose of these methods is to increase the efficiency of diagnostics and prevent possible failures in power systems. The developed mathematical expression is based on complex data analysis, application of statistical methods and machine learning technologies. This makes it possible to achieve more accurate and earlier detection of potential problems. As a result of these innovative approaches, the possibilities for early detection and prevention of faults are significantly increased. This is important for ensuring the smooth operation of power systems and …
Quantitative Assessment And Characterization Of Tool Wear Phenomena In Advanced Manufacturing Processes, Oybek Valijonovich Tuyboyov
Quantitative Assessment And Characterization Of Tool Wear Phenomena In Advanced Manufacturing Processes, Oybek Valijonovich Tuyboyov
Technical science and innovation
This paper explores the quantitative assessment and characterization of tool wear phenomena in advanced manufacturing processes, employing a multifaceted approach encompassing traditional measurements, image processing, machine learning, and predictive modeling. The study emphasizes the intricate dynamics of tool wear and its direct impact on cutting tool performance, addressing challenges in real-time monitoring and optimization of machining operations. Traditional methods like VBmax measurement are juxtaposed with advanced techniques such as the improved conditional generative adversarial net with a high-quality optimization algorithm (CGAN-HQOA), efficient channel attention destruction and construction learning (ECADCL), and shape descriptors based on contour, moments, orientations, and texture. Artificial …
A Study On The Influence Of Cutting Parameters On Surface Roughness And Visualization Through Contour Plots And 3d Surface Profiles, Zayniddin Nosirovich Muxiddinov
A Study On The Influence Of Cutting Parameters On Surface Roughness And Visualization Through Contour Plots And 3d Surface Profiles, Zayniddin Nosirovich Muxiddinov
Technical science and innovation
This research investigates the intricate relationship between cutting parameterscutting speed, feed rate, and depth of cut and surface roughness in machining processes. Surface roughness is a key determinant of machined surface quality, and optimizing cutting parameters is crucial for achieving superior finishes. Employing advanced visualization techniques, including contour plots and 3D surface profiles, the study offers a comprehensive exploration of surface topography dynamics. Statistical analyses and regression modeling enhance the quantitative understanding of how cutting parameters interact to shape surface roughness. The research affirms the significant influence of cutting speed, feed rate, and depth of cut, providing practical insights for …
Research On An Improved Cotton Cleaner Unit, Muzaffar Djurayev, Sherqul Hakimov, Ilhom Abbazov, Rashid Kaldybaev
Research On An Improved Cotton Cleaner Unit, Muzaffar Djurayev, Sherqul Hakimov, Ilhom Abbazov, Rashid Kaldybaev
Technical science and innovation
This article analyzes the results of changes to the working parts of a cotton cleaning unit from small and large impurities. It is known that the UXK installation uses continuous cleaning technology, that is, the cotton entering the purifier is cleaned in all its cleaning sections and then transferred to another process. In these sections, pieces of cotton wool from the separated waste are regenerated in a separate drum. Existing purifier suppliers use a manually operated mechanical system to monitor its performance. These factors do not make it possible to control the cleaning process when the quality indicators of cotton …
Mathematical Modeling Of Fruit Drying And System Analysis Of The Process (On The Example Of Persimmon), Gani Dadayev, Jasur Safarov, Shakhnoza Sultanova, Qobiljon Muxiddinov
Mathematical Modeling Of Fruit Drying And System Analysis Of The Process (On The Example Of Persimmon), Gani Dadayev, Jasur Safarov, Shakhnoza Sultanova, Qobiljon Muxiddinov
Technical science and innovation
Vegetable raw materials, as an object of drying, are characterized by a large amount of water and a low content of dry substances. Vegetable raw materials have a capillary-porous structure. Food products contain both bound and free moisture at the same time. The removal of moisture from the material during drying depends on the total moisture content and the form of connection of moisture with the material. Adsorption and osmotic - bound moisture is retained at the interface of colloidal particles with the environment. Food products contain both bound and free moisture at the same time. The quantitative ratio between …
Improvement Of Convective Drying Equipment, A Ponasenko, Jasur Safarov, Shaxnoza Sultanova
Improvement Of Convective Drying Equipment, A Ponasenko, Jasur Safarov, Shaxnoza Sultanova
Technical science and innovation
Drying of agricultural raw materials is an energy-consuming but integral process. Therefore, increasing the efficiency of drying and improving the quality indicators of dried material at minimum material and energy costs is relevant for producers of agricultural products. By present time numerous researches on improvement of constructions and processes of work of dryers providing satisfactory parameters of energy saving have been carried out. In some scientific materials it is shown that the use of generative gas and straw as fuel allows to reduce energy costs for the drying process in the fluidised bed dryer by 10-30%, the quality of seeds …
Capacitive Electrode Based Moisture Measurement Converter Errors And How To Eliminate Them, Hamdam Jabborov, Temurbek Rashidov
Capacitive Electrode Based Moisture Measurement Converter Errors And How To Eliminate Them, Hamdam Jabborov, Temurbek Rashidov
Technical science and innovation
The article discusses the errors associated with the moisture measuring transducer that is based on the cylindrical electrode, along with their sources and calculation formulas for error elimination. The initial capacitance of the capacitive electrode humidity converter is dependent on its geometric parameters, such as the radii of the electrodes and their length. Accurate calculation of these geometric parameters enables the reduction of regular measurement errors in the input and switching circuit of the moisture converter to a minimum value, resulting in a significant increase in the informativeness and accuracy of the output signal. Consequently, some sources of measurement errors …
Existing Methods For Monitoring Power Autotransformers, Nurali Berdiyorovich Pyrmatov, Dilafruz Rustamjon Qizi Abdullabekova
Existing Methods For Monitoring Power Autotransformers, Nurali Berdiyorovich Pyrmatov, Dilafruz Rustamjon Qizi Abdullabekova
Technical science and innovation
autotransformers, methods, diagnostics, efficiency, monitoring.Particular attention is given to analyzing the gas composition of transformer oil, which is a sensitive indicator of various defects such as thermal breakdown and heating. In addition, methods based on the measurement of external magnetic field strength are discussed. This technique provides a unique opportunity to detect magnetic anomalies associated with possible defects in the structural components of the transformer. The article emphasizes that successful monitoring requires an integrated approach, combining different techniques. The authors analyze the advantages and limitations of each method and offer practical recommendations for integrating these methods into maintenance systems. In …
Influence Of Foil Stamping Parameters On Image Quality, Khalima Abishevna Babakhanova, Mukhlisa Ergashevna Khasanova, Aziz Azimjonovich Soadatov, Nigora Junaydullaevna Sadriddinova
Influence Of Foil Stamping Parameters On Image Quality, Khalima Abishevna Babakhanova, Mukhlisa Ergashevna Khasanova, Aziz Azimjonovich Soadatov, Nigora Junaydullaevna Sadriddinova
Technical science and innovation
The paper evaluates the influence of technological process parameters, namely die temperature and pressure force, on the quality of foil stamping, which is one of the types of finishing having a wide range of applications due to giving unique decorative and protective elements to printed products. When evaluating the influence of process parameters on the linearity and coverability of the image, it was found that the pressure force has less influence on the result than the temperature. According to the data of the study, it can be concluded that the maximum percentage of completeness of covering is achieved at a …
Indicators Affecting Passenger Service Processes And Their Scientific Interpretation, Maxliyoxon Madaminova Maxamatjon Qizi, Saidazim Amanullayevich Ganihodjayev
Indicators Affecting Passenger Service Processes And Their Scientific Interpretation, Maxliyoxon Madaminova Maxamatjon Qizi, Saidazim Amanullayevich Ganihodjayev
Technical science and innovation
Many traffic flow parameters affect the performance of the road network at high voltage. These are low vehicle speeds, high vehicle distances relative to road capacity, and density per unit time (lane occupancy). In turn, a number of factors affect the decrease in traffic speed: the presence of slow-moving vehicles in the stream; pedestrians crossing the road irregularly; increase in traffic flow, etc. The issues of public transportation depend on many factors, each of which requires a separate approach and a complex solution. In large cities around the world, the quality indicators of public transport services, including the issues of …
Multi-Mode Regulation Of The Drying Process Of Industrial Gas, Isamidin Xakimovich Sidikov Pr, Nashvandova Gulruxsor Murot Qizi Phd
Multi-Mode Regulation Of The Drying Process Of Industrial Gas, Isamidin Xakimovich Sidikov Pr, Nashvandova Gulruxsor Murot Qizi Phd
Technical science and innovation
Currently, much attention is paid to the issue of energy efficiency of gas processing enterprises. The continuous growth of world prices for energy resources requires constant improvement of the management system, providing the most optimal conditions for the flow of technological processes. A conceptual model of the heat-mass transfer process occurring in the absorber as an object of research has been developed, which characterizes the relationship of the variables involved in the drying process of natural gas, control, measurable and immeasurable, as well as controlled parameters have been selected, which are used to develop and study a mathematical model of …
The Interaction Of The Cotton Piece With The Piles Of The Scrabble Cotton Drum, Fazliddin Egamberdiev, Ilkhom Abbazov, Oybek Kholmuratov, Rashid Kaldybaev
The Interaction Of The Cotton Piece With The Piles Of The Scrabble Cotton Drum, Fazliddin Egamberdiev, Ilkhom Abbazov, Oybek Kholmuratov, Rashid Kaldybaev
Technical science and innovation
This article presents the results of an analytical study of the process of loosening and cleaning raw cotton from small debris by pileging working bodies of purifiers, on the basis of which directions for further research were chosen to optimize the parameters of the developed pile drum with spherical piles and rubber strips. Cotton entering production contains impurities. The processes of loosening and cleaning the fiber shreds are key in the initial stages of ginning, as they prepare the raw cotton for ginning and directly affect the reliability, productivity of these processes and the quality of the resulting fiber. Weed …
An Experimental Investigation Of The New Vibration Viscometer, Jamshidbek Ulugbek Ugli Shamuratov
An Experimental Investigation Of The New Vibration Viscometer, Jamshidbek Ulugbek Ugli Shamuratov
Technical science and innovation
The characteristics of the new oscillating-plate viscometer have been investigated experimentally. The results obtained are as follows: the resonant frequency of plate oscillation decreases with increasing viscosity; the apparatus constant 𝐾 determined experimentally includes the end and slip effects; the dimensions of the plate should be determined by referring to empirical relations between 𝜌𝜇 and Λ(≡{(𝐸𝑎𝐸)−1}𝑛) for various dimensions of the plate; where 𝜌 is the density, 𝜇 is the viscosity; 𝐸𝑎 the resonant amplitude of plate in the air; E the amplitude of plate in a liquid, and 𝑛 a constant. If the distance between the plate and the …
Adaptation Algorithm For Self-Tuning Of Parameters Of Models Of Multi-Stage Flotation Processes, Nilufar Sharifzhanova, Maksadhan Yakubov, Francesco Gregoretti
Adaptation Algorithm For Self-Tuning Of Parameters Of Models Of Multi-Stage Flotation Processes, Nilufar Sharifzhanova, Maksadhan Yakubov, Francesco Gregoretti
Technical science and innovation
Modern methods for solving problems of planning the execution of batches of tasks in multi-stage systems are characterized by the presence of restrictions on their dimensionality, the impossibility of guaranteed obtaining better results in comparison with fixed packages for different values of the input parameters of the problem. In the article, the author solved the problem of optimizing the composition of job packages running in multi-stage systems using the branch and bound method. Research has been carried out on various ways to form package execution orders tasks in multi-stage systems (heuristic rules for ordering packages tasks in the sequence of …
Device Based On Spectral Analysis For Detection And Correction Of Speech Defects In Uzbek Speaking Children, Sh K. Nematov, Y M. Kamolova
Device Based On Spectral Analysis For Detection And Correction Of Speech Defects In Uzbek Speaking Children, Sh K. Nematov, Y M. Kamolova
Technical science and innovation
В статье рассматриваются возможности и необходимость использования прибора на основе спектрального анализа для выявления и коррекции дефектов речи у узбекоязычных детей. Прибор относится к медицинской технике и специальной педагогике, может быть использован в диагностических исследованиях и реабилитационных процессах, связанных с измерением правильности произношения после установки кохлеарных имплантов у (узбекоязычных) детей с тугоухостью, для улучшения слуха и коррекции речи в слухо- слабоумным детям, направленные на совершенствование правильного произношения. произношение, развитие слуха и речи. Технически визуализация звучащей речи в этом комплексе достигается за счет улавливания звуков микрофоном, преобразования их в дополнительном устройстве, передачи сигнала на процессор, и затем отображение компонентов звучащей речи …
Development Of A Wearable Device For Monitoring And Predicting Human Health In Emergencies, Mukhriddin Arabboev, Shohruh Begmatov, Khabibullo Nosirov, Jean Chamberlain Chedjou, Kyandoghere Kyamakya
Development Of A Wearable Device For Monitoring And Predicting Human Health In Emergencies, Mukhriddin Arabboev, Shohruh Begmatov, Khabibullo Nosirov, Jean Chamberlain Chedjou, Kyandoghere Kyamakya
Technical science and innovation
In recent years, natural disasters and various similar emergencies have caused many people to leave this world early. The need for the use of modern technologies in emergencies is growing day by day. Various modern devices, techniques and methods are used in post-disaster search and rescue operations. The issue of finding a survivor is very important in post-disaster operations. The vital signs of humans are very important in determining the survival of humans. Heart Rate (HR), Blood Pressure (BP), Respiration rate (breathing rate), and Body Temperature (BT) values are considered four essential vital signs that must be measured regularly. In …
Combined Devices Of Facts Technology, Bahrom Ravshanovich Normuratov Associate Lecturer, Misrikhan Misrikhanov, Shukhrat Khamidov
Combined Devices Of Facts Technology, Bahrom Ravshanovich Normuratov Associate Lecturer, Misrikhan Misrikhanov, Shukhrat Khamidov
Technical science and innovation
FACTS - Flexible Alternative Current Transmission System technology is a family of devices, each of which can be used individually and in concert with other devices to control the interrelated parameters of the electrical power system. The mission of FACTS technology is to improve the control of power flows in both steady-state and transient modes of EPS. Flexibility of Electric Power Transmission, applied as "The ability to adapt to changes in transmission system or operating conditions while maintaining sufficient operating limits in steady-state and transient modes". Controlled Flexible AC Transmission Lines - Flexibility from Electric Power Transmission means "AC Power …
Synthesis And Polymerization Processes Of 1-Chlorine-3- Piperidine -2-Propylmethacrylate Monomer, N U. Pulatova, O S. Maksumova, Izabela Barszczewska Rybarek
Synthesis And Polymerization Processes Of 1-Chlorine-3- Piperidine -2-Propylmethacrylate Monomer, N U. Pulatova, O S. Maksumova, Izabela Barszczewska Rybarek
Technical science and innovation
An amino alcohol was synthesized on the basis of piperidine and epichlorohydrin. The esterification reaction of methacrylic acids with the obtained amino alcohol was studied. In order to identify optimal synthesis conditions, the influence of temperature, reaction duration and ratio of reactive reagents was investigated. The processes of obtaining unsaturated esters by esterification reactions with 1-chlorine-3-piperidine-2-propanol and acrylic-, methacrylic acids have been studied. The effect of monomer concentration on the rate of polymerization reaction and the yield of polymer formation was studied . The radical polymerization of a new monomer with a piperidine cycle in the presence of a nitrogen-containing …
Determination Of Main Ingredients In Milk Using Akm-98 Milk Analyzer, Qobil Mukhiddinov Master, Sh Sultanova Dr., J Safarov Dr. Professor, A Aït-Kaddour Dr., Professor, D Samandarov Phd
Determination Of Main Ingredients In Milk Using Akm-98 Milk Analyzer, Qobil Mukhiddinov Master, Sh Sultanova Dr., J Safarov Dr. Professor, A Aït-Kaddour Dr., Professor, D Samandarov Phd
Technical science and innovation
The aim of the research is a quick, easy, economical way to determine milk content. Nowadays, the production of cow’s milk is dominant, but the original quality of non-bovine milk, such as camel’s milk, is now better described and is experiencing growing interest. Camel’s milk, goat’s milk, ewe’s milk and buffalo’s milk have received special attention because of their recognition as potential functional foods from a nutritional point of view. It is admitted that camel’s milk presents a high nutritional quality; e.g., it has three times more vitamin C, minerals, and essential and polyunsaturated Fatty Acids than cow’s milk. It …
Investigation Of The Polycondensation Reaction Of Waste Chemicals In Order To Use Them To Produce Ion-Exchange Polymers, Kh Makhmudov, M Berdieva, A Yuldashev, T Tursunov, R Nazirova, S Turabdjanov, B Kedelbaev
Investigation Of The Polycondensation Reaction Of Waste Chemicals In Order To Use Them To Produce Ion-Exchange Polymers, Kh Makhmudov, M Berdieva, A Yuldashev, T Tursunov, R Nazirova, S Turabdjanov, B Kedelbaev
Technical science and innovation
In this article, we investigated the polycondensation reaction of cube wastes from the Shurtan gas-chemical complex with furfural as a function of reaction temperature, catalyst existence and concentration, starting substance ratio, and other factors. This research resulted in the creation of a new polymer that was used as a polymer matrix for the introduction of ionogenic groups. The composition of cubic waste (CW) from the Shurtan Gas Chemical Complex (SGCC) has been determined by chromatographic analysis. A mixture of CW-1 and CW-2 in equal weight ratios was used to produce the polymer (this mixture will hereinafter be referred to simply …
The Influence Of Waste Water Sediment As A Component Of Asphalt Containing Heavy Metals On Soils Under Model Experimental Conditions, Elena Timofeeva Phd., Associate Professor, Vasilisa Kochetkova Master, Anatoly Klimanov Phd., Senior Lecturer, Sadritdin Turabdzhanov Dr. Professor
The Influence Of Waste Water Sediment As A Component Of Asphalt Containing Heavy Metals On Soils Under Model Experimental Conditions, Elena Timofeeva Phd., Associate Professor, Vasilisa Kochetkova Master, Anatoly Klimanov Phd., Senior Lecturer, Sadritdin Turabdzhanov Dr. Professor
Technical science and innovation
Waste water sediment (WWS) is an ecological hazard to the environment and the search for its effective disposal is an urgent task. The main limitation of the WWS use is associated with the presence of the different ingredients - heavy metals, which can have a negative impact on the environment. There is asphalt production technolologies using WWS. This work considers the possibility of using asphalts with the WWS additives from car washes. This technology will reduce the negative influence on the environment due to the WWS recycling, as well as due to the possibility of using WWS instead of pure …
Chemical Properties Of Ordinary Chernozem Under Oil Contamination And Salinization Under The Conditions Of A Laboratory Experiment (Evidence From Republic Of Bashkortostan), Elena Timofeeva Phd., Associate Professor, Alisa Alexandrova Master, Sadritdin Turabdzhanov Dr., Professor
Chemical Properties Of Ordinary Chernozem Under Oil Contamination And Salinization Under The Conditions Of A Laboratory Experiment (Evidence From Republic Of Bashkortostan), Elena Timofeeva Phd., Associate Professor, Alisa Alexandrova Master, Sadritdin Turabdzhanov Dr., Professor
Technical science and innovation
The Republic of Bashkiria, Russia, is both an agricultural and crude producing region. Soil pollution and as the related process soil salinization are often caused by crude production. One of the most fertile soils - chernozems, represent more than a third of the soil cover of the Bashkortostan Republic. The research crucial task is to study chernozem salinization caused by petroleum pollution, it aims to research the chemism of soil salinization upon condition that crude oil and stratal waters flow into the soil simultaneously. The practical implementation of the proposed research is comprehension that we need to regulate the negative …
A Method For Classifying Ecg Signals With Different Possible States On A Multilayer Perceptron, Sherzod Nematov, Y Talatov
A Method For Classifying Ecg Signals With Different Possible States On A Multilayer Perceptron, Sherzod Nematov, Y Talatov
Technical science and innovation
To automatically determine the state of the cardiovascular system based on the recorded ECG signals, an artificial neural network is trained to classify signals into various possible states. At the same time, the parameters of heart rate variability (HRV) were extracted from the ECG signals and used as input functions for the neural network. HRV is the fluctuation in the time intervals between adjacent heartbeats. For this, the architecture of a neural network based on a multilayer perceptron and a method for obtaining the necessary parameters in the learning process have been developed, and the classification efficiency has been checked …
Study On The Grinding Time Duration Impact On The Properties Of Paper From Alternative Raw Materials, Z. K. Galimova
Study On The Grinding Time Duration Impact On The Properties Of Paper From Alternative Raw Materials, Z. K. Galimova
Technical science and innovation
Both raw and recycled fiber materials are used for paper production. The increase in percentage use of the latter is due to their paper-forming properties, availability and low cost. The article explores the possibility of using pulp from the inner layer of mulberry twig bark. Mulberry twigs, after removing leaves, which are the main raw material in silk production, have no practical industrial application. Recycling waste - mulberry branches - for the production of pulp is therefore relevant as it is aimed at solving raw material and environmental problems. The purpose of this work is to use local raw materials …