Automotive Engineering Commons^™

Active Management Assistant System For Embry-Riddle Ecocar 3 Hybrid Supervisory Control System, Matthew Nelson, Blair Cutting, Michael J. Aleardi

Student Works

The Embry-Riddle EcoCAR 3 team is developing a prototype hybrid Chevrolet Camaro utilizing a customized vehicle powertrain controller. This controller is serving to ensure system safety, vehicle operation, and consumer drivability while also incorporating advanced driving aids to achieve both the desired performance levels one expects from a Camaro as well as vehicle efficiency. This vehicle must reach the team set vehicle technical specifications of a 4.9 second 0 to 60 time while maintaining a 53 miles per gallon gasoline equivalence rating.

In order to reach the efficiency goal, the team is developing an Active Management Assistance System utilizing computer …

Investigation Of Low Reynolds Number Flow And Heat Transfer Of Louvered Surfaces, Pradeep R. Shinde

FIU Electronic Theses and Dissertations

This study focuses on the investigation of flow behavior at low Reynolds numbers by the experimental and numerical performance testing of micro-channel heat exchangers. An experimental study of the heat transfers and pressure drop of compact heat exchangers with louvered fins and flat tubes was conducted within a low air-side Reynolds number range of 20 < Re_Lp < 225. Using an existing low-speed wind tunnel, 26 sample heat exchangers of corrugated louver fin type, were tested. New correlations for Colburn j and Fanning friction f factor have been developed in terms of non-dimensional parameters. Within the investigated parameter ranges, it seems that both the j and f factors are better represented by two correlations in two flow regimes (one for Re_Lp = 20 – 80 and one for Re_Lp = 80 – 200) than a single regime correlation in the power-law format. The results support the conclusion that airflow and heat transfer at very low Reynolds numbers behaves differently from that …

Obstacle Filtering Alogrithm For Control Of An Autonomous Road Vehicle In Public Highway Traffic, Qian Wang, Beshah Ayalew

Publications

This paper presents an obstacle filtering algorithm that mimics human driver-like grouping of objects within a model predictive control scheme for an autonomous road vehicle. In the algorithm, a time to collision criteria is first used as risk assessment indicator to filter the potentially dangerous obstacle object vehicles in the proximity of the autonomously controlled vehicle. Then, the filtered object vehicles with overlapping elliptical collision areas put into groups. A hyper elliptical boundary is regenerated to define an extended collision area for the group. To minimize conservatism, the parameters for the tightest hyper ellipse are determined by solving an optimization …

Safety Of Lithium Nickel Cobalt Aluminum Oxide Battery Packs In Transit Bus Applications, Timothy Cleary, Marc Serra Bosch, Jim Kreibick, Joel Anstrom

Mineta Transportation Institute Publications

The future of mass transportation is clearly moving toward the increased efficiency and greenhouse gas reduction of hybrid and electric vehicles. With the introduction of high-power/high-energy storage devices such as lithium ion battery systems serving as a key element in the system, valid safety and security concerns emerge. This is especially true when the attractive high-specific-energy and power-chemistry lithium nickel cobalt aluminum oxide (NCA) is used. This chemistry provides great performance but presents a safety and security risk when used in large quantities, such as for a large passenger bus. If triggered, the cell can completely fuel its own fire, …

Analysis Of The Electric Vehicles Adoption Over The United States, Ali Soltani-Sobh, Kevin Heaslip, Aleksandar Stevanovic, Ryan Bosworth, Danilo Radiviojevic

Applied Economics Faculty Publications

Increasing the use of electric vehicles (EVs) has been suggested as a possible method to decrease fuel consumption and greenhouse gas (GHG) emissions in an effort to mitigate the causes of climate change. In this study, the relationship between the market share of electric vehicles and the presence of government incentives, and other influential socio-economic factors were examined. The methodology of this study is based on a cross-sectional/time-series (panel) analysis. The developed model is an aggregated binomial logit share model that estimates the modal split between EV and conventional vehicles for different U.S. states from 2003 to 2011. The results …

Energy Consumption Modeling And Analyses In Automotive Manufacturing Plant, Lujia Feng, Laine Mears

Publications

Manufacturing plants energy consumption accounts for a large share in world energy usage. Energy consumption modeling and analyses are widely studied to understand how and where the energy is used inside of the plants. However, a systematic energy modeling approach is seldom studied to describe the holistic energy in the plants. Especially using layers of models to share information and guide the next step modeling is rarely studied. In this paper, a manufacturing system temporal and organizational framework was used to guide the systematic energy modeling approach. Various levels of models were established and tested in an automotive manufacturing plant …

Injury Severity Data For Front And Second Row Passengers In Frontal Crashes, Theresa Atkinson, Leszek Gawarecki, Massoud Tavakoli

Crash Safety Center Publications

The data contained here were obtained from the National Highway Transportation Safety Administration׳s National Automotive Sampling System – Crashworthiness Data System (NASS-CDS) for the years 2008–2014. This publically available data set monitors motor vehicle crashes in the United States, using a stratified random sample frame, resulting in information on approximately 5000 crashes each year that can be utilized to create national estimates for crashes. The NASS-CDS data sets document vehicle, crash, and occupant factors. These data can be utilized to examine public health, law enforcement, roadway planning, and vehicle design issues. The data provided in this brief are a subset …

Injury Severity Data For Front And Second Row Passengers In Frontal Crashes, Theresa Atkinson, Leszek Gawarecki, Massoud S. Tavakoli

Mathematics Publications

The data contained here were obtained from the National Highway Transportation Safety Administration׳s National Automotive Sampling System – Crashworthiness Data System (NASS-CDS) for the years 2008–2014. This publically available data set monitors motor vehicle crashes in the United States, using a stratified random sample frame, resulting in information on approximately 5000 crashes each year that can be utilized to create national estimates for crashes. The NASS-CDS data sets document vehicle, crash, and occupant factors. These data can be utilized to examine public health, law enforcement, roadway planning, and vehicle design issues. The data provided in this brief are a subset …

Energy, Economy, And Environment Analysis And Optimization On Manufacturing Plant Energy Supply System, Lujia Feng, Laine Mears, Cleveland Beaufort, Joerg Schulte

Publications

Increasing attention has recently been drawn to energy consumption in manufacturing plants. Facing the challenges from reducing emissions coupled with rising raw material prices and energy costs, manufacturers are trying to balance the energy usage strategy among the total energy consumption, economy, and environment, which can be self-conflicting at times. In this paper, energy systems in manufacturing environments are reviewed, and the current status of onsite energy system and renewable energy usage are discussed. Single objective and multicriteria optimization approaches are effectively formulated for making the best use of energy delivered to the production processes. Energy supply operation suggestions based …

Competencies Related To Marine Mechatronics Education, Vukica M. Jovanovic, Petros J. Katsioloudis, Mileta Tomovic, Thomas B. Stout

Engineering Technology Faculty Publications

Recent changes in the needs of the military have caused the U.S. Navy to spend more time out to sea. Longer deployments limit the time available for performing maintenance and for training their technicians. The Navy is also steadily reducing the number of sailors manning each vessel, therefore requiring more automated systems to keep the ships at sea and in total readiness. To meet this need, industrial automation systems are being investigated as replacements and upgrades for the military systems that have been used for years in warship designs. This will require ship repair partners, both military and civilian, to …