Automotive Engineering Commons^™

Aerodynamic Design And Analysis Of A Modified 2006 Mazda Miata, William N. Recher

Honors College Theses

Aerodynamic forces developed by automobiles have destabilizing effects at high speed. These forces tend to skew toward a vehicle’s rear which can present safety concerns, especially for rear-wheel-drive automobiles like the Mazda Miata. To address oversteer and high-speed instability, a vehicle’s design can be tailored to bring about aerodynamic balance and improve traction. LiDAR was used to bring the physical automobile into the digital space. Then, a splitter and diffuser were added to reduce the magnitude of the destabilizing forces. Next, the size and shape of the rear-wing required to balance the vehicle was calculated using a combination of parameters …

Exploration Of Characteristic Curve In Fox Float 3 Shock Dampers To Expedite Shock Damp Tuning., Joshua R. Moore

Honors College Theses

The shock absorber is an integral part of a vehicle suspension system and has a strong influence on its performance, especially in the case of motorsports. It is important to study the force versus velocity relationship, commonly known as the characteristic curve of the shock absorber both during compression and rebound. Vendor-supplied characteristics often reflect the behavior of the shock absorber in a particular setting. However, during the installation, the settings inside the shock absorber are adjusted to increase the human comfort level and performance of the vehicle. This may change the characteristic curve of the shock. The available data …

Development And Evaluation Of Blind Spot Detection Safety System Based On 2d-Lidar Technology As An Optimization For Adas Systems, Timothy J. Sutton

Honors College Theses

Distracted driving poses a significant safety hazard and will only exacerbate as the number of modern-day distractions increases. To mitigate this problem, Advanced Driver Assistance Systems (ADAS) features, such as blind spot detection, have been pivotal for the safer operation of vehicles. Towards the same objective, the goal of this research is to utilize 2D LiDAR sensors to create a blind spot detection system that will detect objects and surfaces that are outside of the driver’s field of view. A comparative analysis was conducted by developing a 2D LiDAR-based system utilizing NVIDIA Jetson Orion Nano and Python alongside an ultrasonic-based …

Traffic Light Detection And V2i Communications Of An Autonomous Vehicle With The Traffic Light For An Effective Intersection Navigation Using Mavs Simulation, Mahfuzur Rahman

Theses and Dissertations

Intersection Navigation plays a significant role in autonomous vehicle operation. This paper focuses on enhancing autonomous vehicle intersection navigation through advanced computer vision and Vehicle-to-Infrastructure (V2I) communication systems. The research unfolds in two phases. In the first phase, an approach utilizing YOLOv8s is proposed for precise traffic light detection and recognition, trained on the Small-Scale Traffic Light Dataset (S2TLD). The second phase establishes seamless connectivity between autonomous vehicles and traffic lights in a simulated Mississippi State University Autonomous Vehicle Simulation (MAVS) environment resembling a small city with multiple intersections. This V2I system enables the transmission of Signal Phase and Timing …

Comparison Of Methods For Estimating Instantaneous Turn Radius Of Ackermann Steering Vehicles, Kenneth Gennaro Stutts

Doctoral Dissertations and Master's Theses

The instantaneous turn radius of an Ackermann steering vehicle is the distance to a point in space about which the vehicle will travel in an arc during a turn. There are at least six ways to estimate instantaneous turn radius and each method uses different inputs and has distinct advantages and disadvantages. In this thesis, six different methods will be used to estimate the instantaneous turn radius of a vehicle traveling on a closed circuit. This testing will clarify similarities and differences between the methods. This thesis clarifies which method will be the most appropriate for a given set of …

Av Operation And Energy Efficiency Improved Through The Evaluation And Demonstration Of Av Sensor Technology, Nicholas Brown

Dissertations

The majority of states have passed legislation or have signed an executive order enacting safe testing, development, and deployment of level 4 and level 5 autonomous vehicles (AVs) in accordance with SAE standard J3016, which has led to an increase in the frequency of AV testing. The major driving force behind the push for AVs on public roads appears to be the increases the number of AVs on the road to decrease the chances of fatalities from distracted drivers. There are reports of disengagement from companies, which are required to report them to operate within California. The continuance of disengagements …

Safe Navigation Of Quadruped Robots Using Density Functions, Andrew Zheng

All Theses

Safe navigation of mission-critical systems is of utmost importance in many modern autonomous applications. Over the past decades, the approach to the problem has consisted of using probabilistic methods, such as sample-based planners, to generate feasible, safe solutions to the navigation problem. However, these methods use iterative safety checks to guarantee the safety of the system, which can become quite complex. The navigation problem can also be solved in feedback form using potential field methods. Navigation function, a class of potential field methods, is an analytical control design to give almost everywhere convergence properties, but under certain topological constraints and …

Building An Application Model For Efficient Ride Booking In Ride-Hailing Industry, Nikunjkumar Butani

Electronic Theses, Projects, and Dissertations

The purpose of this study is to develop an efficient ride booking application in the ride-hailing sector. The objective of the research is to provide users with an easy way to book rides at reasonable prices and convenient times. This project helps to promote the ride-hailing industry by providing guidance for the creation of real-time applications. This project answered three questions. 1. What are the technology and infrastructure requirements for developing a consolidated online application for centralized ride sharing? 2. What are other examples of application aggregators in other industries than transportation and how do they work? 3. What are …

Controlled Manipulation And Transport By Microswimmers In Stokes Flows, Jake Buzhardt

All Dissertations

Remotely actuated microscale swimming robots have the potential to revolutionize many aspects of biomedicine. However, for the longterm goals of this field of research to be achievable, it is necessary to develop modelling, simulation, and control strategies which effectively and efficiently account for not only the motion of individual swimmers, but also the complex interactions of such swimmers with their environment including other nearby swimmers, boundaries, other cargo and passive particles, and the fluid medium itself. The aim of this thesis is to study these problems in simulation from the perspective of controls and dynamical systems, with a particular focus …

Improved Vehicle-Bridge Interaction Modeling And Automation Of Bridge System Identification Techniques, Omar Abuodeh

All Dissertations

The Federal Highway Administration (FHWA) recognizes the necessity for cost-effective and practical system identification (SI) techniques within structural health monitoring (SHM) frameworks for asset management applications. Indirect health monitoring (IHM), a promising SHM approach, utilizes accelerometer-equipped vehicles to measure bridge modal properties (e.g., natural frequencies, damping ratios, mode shapes) through bridge vibration data to assess the bridge's condition. However, engineers and researchers often encounter noise from road roughness, environmental factors, and vehicular components in collected vehicle signals. This noise contaminates the vehicle signal with spurious modes corresponding to stochastic frequencies, impacting damage monitoring assessments. Thus, an efficient and reliable SI …

Virtual Prototyping And Validation For Autonomous Assistive Mobility, Amogh Venkataramana Reddy

All Theses

Physical disability in humans is something that no one has control over. It is catastrophic for people to experience it, and sometimes hinders them from enjoying the essence of life. Though disability is something people have no control over, they do have control on how they can go forward and make life beautiful and meaningful. Wheelchairs have helped people with disabilities in mobility, allowing them to move around with the help of others or sometimes on their own. This research will focus on development of an autonomous assistive mobility robot to help the disabled using virtual prototyping tools for development …

Development Of A Soft Robotic Approach For An Intra-Abdominal Wireless Laparoscopic Camera, Hui Liu

Doctoral Dissertations

In Single-Incision Laparoscopic Surgery (SILS), the Magnetic Anchoring and Guidance System (MAGS) arises as a promising technique to provide larger workspaces and field of vision for the laparoscopes, relief space for other instruments, and require fewer incisions. Inspired by MAGS, many concept designs related to fully insertable magnetically driven laparoscopes are developed and tested on the transabdominal operation. However, ignoring the tissue interaction and insertion procedure, most of the designs adopt rigid structures, which not only damage the patients' tissue with excess stress concentration and sliding motion but also require complicated operation for the insertion. Meanwhile, lacking state tracking of …

Sensor Updates For Bigheaded Carp-Tracking Autonomous Boat, Jordan Kaufmann

Honors College Theses

Bigheaded carp are an invasive species that overpopulate and compete with the native species of Kentucky Lake as well as many other North American aquatic ecosystems. The movement patterns of Bigheaded carp are being studied nationwide by the United States Geological Survey and multiple universities. These studies ultimately seek to control their spread and reduce or reverse the ecosystem destabilization caused by this invasive species. Such studies are currently conducted manually on Kentucky Lake by graduate students affiliated with the Murray State University (MSU) Biology Department and Hancock Biological Station, and these manual studies are an arduous and time-consuming effort. …

Risk Assessments And Modeling Of Driver By Using Risk Potential Theory, Riku Kikuta

Theses and Dissertations

Recently, various self-driving and driving assistance systems such as Advanced Driver Assistance System (ADAS) have been developed with the intent to reduce the number of motor vehicle accidents. While self-driving systems have been proven to reduce traffic accidents, the systems sometimes make other drivers confused because of their mechanical behavior. To avoid confusion and possible error, it is necessary to construct self-driving systems that exhibit human-like behaviors. Risk Potential theory has been used to construct models that successfully represent driver behavior, especially expert behavior. This project uses Risk Potential theory to construct and evaluate a collision avoidance driver model which …

Vanet Applications Under Loss Scenarios & Evolving Wireless Technology, Adil Alsuhaim

All Dissertations

In this work we study the impact of wireless network impairment on the performance of VANET applications such as Cooperative Adaptive Cruise Control (CACC), and other VANET applications that periodically broadcast messages. We also study the future of VANET application in light of the evolution of radio access technologies (RAT) that are used to exchange messages. Previous work in the literature proposed fallback strategies that utilizes on-board sensors to recover in case of wireless network impairment, those methods assume a fixed time headway value, and do not achieve string stability. In this work, we study the string stability of a …

Deep Reinforcement Learning And Game Theoretic Monte Carlo Decision Process For Safe And Efficient Lane Change Maneuver And Speed Management, Shahab Karimi

All Dissertations

Predicting the states of the surrounding traffic is one of the major problems in automated driving. Maneuvers such as lane change, merge, and exit management could pose challenges in the absence of intervehicular communication and can benefit from driver behavior prediction. Predicting the motion of surrounding vehicles and trajectory planning need to be computationally efficient for real-time implementation. This dissertation presents a decision process model for real-time automated lane change and speed management in highway and urban traffic. In lane change and merge maneuvers, it is important to know how neighboring vehicles will act in the imminent future. Human driver …

Optimization Of A Simultaneous Localization And Mapping (Slam) System For An Autonomous Vehicle Using A 2-Dimensional Light Detection And Ranging Sensor (Lidar) By Sensor Fusion, Shaen Mehrzed

Honors College Theses

Fully autonomous vehicles must accurately estimate the extent of their environment as well as their relative location in their environment. A popular approach to organizing such information is creating a map of a given physical environment and defining a point in this map representing the vehicle’s location. Simultaneous Mapping and Localization (SLAM) is a computing algorithm that takes inputs from a Light Detection and Ranging (LiDAR) sensor to construct a map of the vehicle’s physical environment and determine its respective location in this map based on feature recognition simultaneously. Two fundamental requirements allow an accurate SLAM method: one being accurate …

Human Tracking Function For Robotic Dog, Andrew Sharkey

Williams Honors College, Honors Research Projects

With the increase the increase in automation and humans and robots working side by side, there is a need for a more organic way of controlling robots. The goal of this project is to create a control system for Boston dynamics robotic dog Spot that implements human tracking image software to follow humans using computer vision as well as using hand tracking image software to allow for control input through hand gestures.

Jack And Alex Rc-Baja, Alex Vornbrock

All Undergraduate Projects

Teams of two mechanical engineering students were tasked with the construction of an RC Baja car qualified by the rules and regulations of the Baja competition as well as specifications set by the individual team member for their portion of the vehicle. This proposal focuses on the Chassis and Drivetrain of the vehicle while team member Jack Stutz oversaw the steering and suspension. Teams will compete against each other in various modes to determine the best vehicles of the competitors. The chassis was made of standard aluminum, the remaining parts made by the students were made with PLA; both materials …

Neuroevolution And Machine Learning Research Applied To Connected Automated Vehicle And Powertrain Control, Frédéric F. Jacquelin

Dissertations, Master's Theses and Master's Reports

This dissertation focuses on advancing Predictive Energy Management (PrEM) functions applied to modern connected and automated vehicles (CAV) cohorts. PrEM aims to utilize connectivity and ADAS functions to adaptively minimize vehicle energy consumption in a wide array of operations, extending the original control designed around a reduced set of test cycle procedures to adapt to real-world stochastic operating conditions. This research document is built upon three journal publications covering two PrEM schemes; the global cohort and local vehicle optimization paths. Both optimal control solutions are generated using various Neuroevolution centric processes.

Chapter 1 discusses the methods and reasoning behind the …

Enhancing Traffic Safety In Unpredicted Environments With Integration Of Adas Features With Sensor Fusion In Intelligent Electric Vehicle Platform With Implementation Of Environmental Mapping Technology, David S. Obando Ortegon

Electronic Theses and Dissertations

A major objective on society is to reduce the number of accidents and fatalities on the road for drivers, and pedestrians. Therefore, the automotive engineering field is working on this problem through the development and integration of safety technologies such as advanced driving assistance systems. For this reason, this work was intended to develop and evaluate the performance of different ADAS features and IV technologies under unexpected scenarios. This by the development of safety algorithms applied to the intelligent electric vehicle designed and built in this work, through the use of ADAS sensors based on sensor fusion. Evaluation of AEB, …

Machine Learning Approach To Investigate Ev Battery Characteristics, Shayan Falahatdoost

Major Papers

The main factor influencing an electric vehicle’s range is its battery. Battery electric vehicles experience driving range reduction in low temperatures. This range reduction results from the heating demand for the cabin and recuperation limits by the braking system. Due to the lack of an internal combustion engine-style heat source, electric vehicles' heating system demands a significant amount of energy. This energy is supplied by the battery and results in driving range reduction. Moreover, Due to the battery's low temperature in cold weather, the charging process through recuperation is limited. This limitation of recuperation is caused by the low reaction …

On-Board Artificial Intelligence For Failure Detection And Safe Trajectory Generation, Eduardo Morillo

Doctoral Dissertations and Master's Theses

The use of autonomous flight vehicles has recently increased due to their versatility and capability of carrying out different type of missions in a wide range of flight conditions. Adequate commanded trajectory generation and modification, as well as high-performance trajectory tracking control laws have been an essential focus of researchers given that integration into the National Air Space (NAS) is becoming a primary need. However, the operational safety of these systems can be easily affected if abnormal flight conditions are present, thereby compromising the nominal bounds of design of the system's flight envelop and trajectory following. This thesis focuses on …

Instance Segmentation-Based Depth Completion Using Sensor Fusion And Adaptive Clustering For Autonomous Vehicle Perception, Mohammad Z. El-Yabroudi

Dissertations

Depth sensing is critical for safe and accurate maneuvering in robotics and self-driving car (SDC) applications. Most recent LiDAR sensors, such as Ouster and Velodyne, offer 360 degrees of scanning at the rate of ten frames per second, making them very appropriate for autonomous driving applications. However, LiDAR point cloud data show many shortcomings, especially its data sparsity and unassigned nature, making it very challenging to utilize in applications such as perception, 3D object detection, 3D scene reconstruction, and simultaneous localization and mapping.

In this study, a novel framework using instance image segmentation and the raw LiDAR data for the …

Multi-Robot Symbolic Task And Motion Planning Leveraging Human Trust Models: Theory And Applications, Huanfei Zheng

All Dissertations

Multi-robot systems (MRS) can accomplish more complex tasks with two or more robots and have produced a broad set of applications. The presence of a human operator in an MRS can guarantee the safety of the task performing, but the human operators can be subject to heavier stress and cognitive workload in collaboration with the MRS than the single robot. It is significant for the MRS to have the provable correct task and motion planning solution for a complex task. That can reduce the human workload during supervising the task and improve the reliability of human-MRS collaboration. This dissertation relies …

Machine Learning To Predict Warhead Fragmentation In-Flight Behavior From Static Data, Katharine Larsen

Doctoral Dissertations and Master's Theses

Accurate characterization of fragment fly-out properties from high-speed warhead detonations is essential for estimation of collateral damage and lethality for a given weapon. Real warhead dynamic detonation tests are rare, costly, and often unrealizable with current technology, leaving fragmentation experiments limited to static arena tests and numerical simulations. Stereoscopic imaging techniques can now provide static arena tests with time-dependent tracks of individual fragments, each with characteristics such as fragment IDs and their respective position vector. Simulation methods can account for the dynamic case but can exclude relevant dynamics experienced in real-life warhead detonations. This research leverages machine learning methodologies to …

Reduced Fuel Emissions Through Connected Vehicles And Truck Platooning, Paul D. Brummitt

Electronic Theses and Dissertations

Vehicle-to-infrastructure (V2I) and vehicle-to-vehicle (V2V) communication enable the sharing, in real time, of vehicular locations and speeds with other vehicles, traffic signals, and traffic control centers. This shared information can help traffic to better traverse intersections, road segments, and congested neighborhoods, thereby reducing travel times, increasing driver safety, generating data for traffic planning, and reducing vehicular pollution. This study, which focuses on vehicular pollution, used an analysis of data from NREL, BTS, and the EPA to determine that the widespread use of V2V-based truck platooning—the convoying of trucks in close proximity to one another so as to reduce air drag …

B.A.C.O.N. (Battery-Powered Autonomous Cart Conversion) Autonomous Vehicle Design, Robyn C. Ribet, Damond Li, Tanner Hillman, Christopher Or

Mechanical Engineering

The goal of our project is to convert an electric go cart into an autonomous testing platform. We must enable autonomous braking, steering, and acceleration with electro-mechanical systems. We began the project with ideation to create our initial design and have since received ample feedback from faculty, students, and our sponsor. With this feedback we were able to refine our preliminary ideas and produce a detailed design supported with ample analysis, research, and external advice. We have developed our project in four main subsystems: Steering, braking, acceleration, and emergency braking. Following, we procured, manufactured, and assembled all of our designed …

Modeling And Control Of A Planar Bounding Quadrupedal Robot, Patrick John Ward

Master's Theses

Legged robots have the potential to be a valuable technology that provides agile and adaptive locomotion over complex terrain. To realize legged locomotion's full abilities a control design must consider the nonlinear piecewise dynamics of the systems. This paper aims to develop a controller for the planar bounding of a quadrupedal robot.

The bounding of the quadruped robot is characterized by a simplified hybrid model that consists of two subsystems for stance and flight phases and the switching laws between the two states. An additional model, the Multibody model, with fewer simplifications, is used concurrently to best approximate real-world behavior. …

Automotive Sensor Fusion Systems For Traffic Aware Adaptive Cruise Control, Jonah T. Gandy

Theses and Dissertations

The autonomous driving (AD) industry is advancing at a rapid pace. New sensing technology for tracking vehicles, controlling vehicle behavior, and communicating with infrastructure are being added to commercial vehicles. These new automotive technologies reduce on road fatalities, improve ride quality, and improve vehicle fuel economy. This research explores two types of automotive sensor fusion systems: a novel radar/camera sensor fusion system using a long shortterm memory (LSTM) neural network (NN) to perform data fusion improving tracking capabilities in a simulated environment and a traditional radar/camera sensor fusion system that is deployed in Mississippi State’s entry in the EcoCAR Mobility …