Open Access. Powered by Scholars. Published by Universities.®
- Discipline
- Publication Type
Articles 1 - 25 of 25
Full-Text Articles in Aerospace Engineering
Scramjet Isolator Modeling And Control, John R. Hutzel
Scramjet Isolator Modeling And Control, John R. Hutzel
Theses and Dissertations
The scramjet isolator is a duct in which pressure increases from the inlet to the combustor via a shock train. The shock train leading edge (LE) location must be controlled in an operational scramjet. A LE location measurement algorithm, dynamic model, and control algorithm were developed and validated with 500 frame per second (FPS) shadowgraph images in this research. The test apparatus consisted of a direct connect cold-flow high-speed wind tunnel with an adjustable ramp mounted in the tunnel floor. Ramp adjustments changed the tunnel cross-sectional area which changed the tunnel back pressure and LE location. Wall-mounted pressure transducers and …
Design And Control Of Flapping Wing Micro Air Vehicles, Michael L. Anderson
Design And Control Of Flapping Wing Micro Air Vehicles, Michael L. Anderson
Theses and Dissertations
Flapping wing Micro Air Vehicles (MAVs) continues to be a growing field, with ongoing research into unsteady, low Re aerodynamics, micro-fabrication, and fluid-structure interaction. However, research into flapping wing control of such MAVs continues to lag. Existing research uniformly consists of proposed control laws that are validated by computer simulations of quasi-steady blade-element formulae. Such simulations use numerous assumptions and cannot be trusted to fully describe the flow physics. Instead, such control laws must be validated on hardware. Here, a novel control technique is proposed called Bi-harmonic Amplitude and Bias Modulation (BABM) which can generate forces and moments in 5 …
Stochastic Real-Time Optimal Control: A Pseudospectral Approach For Bearing-Only Trajectory Optimization, Steven M. Ross
Stochastic Real-Time Optimal Control: A Pseudospectral Approach For Bearing-Only Trajectory Optimization, Steven M. Ross
Theses and Dissertations
A method is presented to couple and solve the optimal control and the optimal estimation problems simultaneously, allowing systems with bearing-only sensors to maneuver to obtain observability for relative navigation without unnecessarily detracting from a primary mission. A fundamentally new approach to trajectory optimization and the dual control problem is developed, constraining polynomial approximations of the Fisher Information Matrix to provide an information gradient and allow prescription of the level of future estimation certainty required for mission accomplishment. Disturbances, modeling deficiencies, and corrupted measurements are addressed with recursive updating of the target estimate with an Unscented Kalman Filter and the …
Precision Position, Navigation, And Timing Without The Global Positioning System, Kenneth A. Fisher, John F. Raquet
Precision Position, Navigation, And Timing Without The Global Positioning System, Kenneth A. Fisher, John F. Raquet
Faculty Publications
The NAVSTAR Global Positioning System GPS has revolutionized modern warfare. Since 2005 almost all US precision-guided munitions have used GPS targeting data. Consequently, weapons delivery systems are able to strike enemy targets with precision, often resulting in little or no collateral damage. Furthermore, nearly all military assets, including aircraft, tanks, ships, missiles, mortar rounds, cargo boxes, and dismounted Soldiers rely on the accurate position determination that GPS provides. For military users of this system, two main limitations emerge. First, the system relies on line of sight that is, the satellites must be in view of the receiver s antenna so …
A Relay-Rover Differential Game, Youngdong Choi
A Relay-Rover Differential Game, Youngdong Choi
Theses and Dissertations
Guidance laws are developed to optimally position a relay Micro-UAV (MAV) to provide an operator at the base with real-time Intelligence, Surveillance, and Reconnaissance (ISR) by relaying communication and video signals when the rover MAV performing the ISR mission is out of radio contact range with the base. The ISR system is comprised of two MAVs, the Relay and the Rover, and a Base. The Relay strives to minimize the radio frequency (RF) power required for maintaining communications, while the Rover performs the ISR mission, which may maximize the required RF power. The optimal control of the Relay MAV entails …
Optical Flow-Based Odometry For Underground Tunnel Exploration, Terra Kier
Optical Flow-Based Odometry For Underground Tunnel Exploration, Terra Kier
Theses and Dissertations
As military operations in degraded or GPS-denied environments continue to increase in frequency and importance, there is an increased necessity to be able to determine precision location within these environments. Furthermore, authorities are finding a record number of tunnels along the U.S.-Mexico border; therefore, underground tunnel characterization is becoming a high priority for U.S. Homeland Security as well. This thesis investigates the performance of a new image registration technique based on a two camera optical- flow configuration using phase correlation techniques. These techniques differ from other image based navigation methods but present a viable alternative increasing autonomy and answering the …
Repeatable Manufacture Of Wings For Flapping Wing Micro Air Vehicles Using Microelectromechanical System (Mems) Fabrication Techniques, David S. Dawson
Repeatable Manufacture Of Wings For Flapping Wing Micro Air Vehicles Using Microelectromechanical System (Mems) Fabrication Techniques, David S. Dawson
Theses and Dissertations
While there have been great advances in the area of Flapping Wing Micro Air Vehicles (FWMAV), prototype parts have been constructed with the objective of scientific discovery and basic research. There has been little effort to make parts that could be consistently and repeatedly manufactured. Until recently, there has been little, if any, focus on methods that could be used and verified by subsequent researchers. It is herein proposed that Microelectromechanical System fabrication methods will provide a fast, cheap, and highly repeatable manufacturing method for the FWMAV wings. The wings manufactured to demonstrate this process, bio-inspired by the Manduca Sexta, …
Image Dependent Relative Formation Navigation For Autonomous Aerial Refueling, James M. Howard
Image Dependent Relative Formation Navigation For Autonomous Aerial Refueling, James M. Howard
Theses and Dissertations
This research tests the feasibility, accuracy, and reliability of a predictive rendering and holistic comparison algorithm with use of an optical sensor to provide relative distance and position behind a lead or tanker aircraft. Using an accurate model of a tanker, an algorithm renders image(s) for comparison with actual collected images by a camera installed on the receiver aircraft. Based on this comparison, information used to create the rendered image(s) is used to provide the relative navigation solution required for autonomous air refueling. Given enough predicted images and processing time, this approach should reliably find an accurate solution. Building on …
Flapping Wing Micro Air Vehicle Wing Manufacture And Force Testing, Nathanael J. Sladek
Flapping Wing Micro Air Vehicle Wing Manufacture And Force Testing, Nathanael J. Sladek
Theses and Dissertations
Numerous wing manufacturing techniques have been developed by various universities for research on Flapping Wing Micro Air Vehicles. Minimal attention though is given to repeatability of wing aerodynamics and dynamic response, which is crucial to avoid asymmetric flapping. Thus the focus of this research becomes twofold. First, repeatable wing manufacturing techniques are developed to ensure flapping wings have similar aerodynamic and dynamic characteristics. For this purpose, four wing designs were selected to not only test the aerodynamics of the different designs, but to also validate manufacturing techniques. The various wing designs are assessed using two methods: dynamic and aerodynamic data. …
Vision-Aided Autonomous Precision Weapon Terminal Guidance Using A Tightly-Coupled Ins And Predictive Rendering Techniques, Jonathan W. Beich
Vision-Aided Autonomous Precision Weapon Terminal Guidance Using A Tightly-Coupled Ins And Predictive Rendering Techniques, Jonathan W. Beich
Theses and Dissertations
This thesis documents the development of the Vision-Aided Navigation using Statistical Predictive Rendering (VANSPR) algorithm which seeks to enhance the endgame navigation solution possible by inertial measurements alone. The eventual goal is a precision weapon that does not rely on GPS, functions autonomously, thrives in complex 3-D environments, and is impervious to jamming. The predictive rendering is performed by viewpoint manipulation of computer-generated of target objects. A navigation solution is determined by an Unscented Kalman Filter (UKF) which corrects positional errors by comparing camera images with a collection of statistically significant virtual images. Results indicate that the test algorithm is …
Conceptual Design Tool To Analyze Electrochemically-Powered Micro Air Vehicles, Douglas J. Pederson
Conceptual Design Tool To Analyze Electrochemically-Powered Micro Air Vehicles, Douglas J. Pederson
Theses and Dissertations
A multi-fidelity conceptual design tool was developed to assess electrochemically-powered micro air vehicles(MAVs). The tool utilizes four areas of contributing analyses (CAs): aerodynamics, propulsion, power management, and power sources to determine the endurance duration of a given mission. The low-fidelity aerodynamic CA consisted of drag polar calculations and the high-level CA used a vortex theory code called Athena Vortex Lattice (AVL). The propulsion CA employed QPROP and a MATLAB code that used experimental propeller data and motor constants to predict propeller-motor combination performance for the low- and high-fidelity tracks, respectively. The power management CA determined the percentage of required power …
Sizing Analysis For Aircraft Utilizing Hybrid-Electronic Propulsion Systems, Matthew D. Rippl
Sizing Analysis For Aircraft Utilizing Hybrid-Electronic Propulsion Systems, Matthew D. Rippl
Theses and Dissertations
A submerged inlet investigation, using flow control in the form of discrete blowing, examined proximity and jet directionality to improve compressor face uniformity. The flow control locations were at the head of the ramp and part way down the ramp, providing four configurations under examination. Laser Doppler velocimetry (LDV)measurements at the throat determined the effect of the flow control based on the statistical velocity measurements. Blowing at closer proximity to the throat and targeting the largest velocity deficit region provided the best results. The airspeed and inlet velocity simulated takeoff and landing conditions; velocities ranged from Mach 0.1-0.3 at the …
Optimization Of Hybrid-Electric Propulsion Systems For Small Remotely-Piloted Aircraft, Todd A. Rotramel
Optimization Of Hybrid-Electric Propulsion Systems For Small Remotely-Piloted Aircraft, Todd A. Rotramel
Theses and Dissertations
Small electric-powered remotely-piloted aircraft (RPA) used by today's warfighters for intelligence, surveillance, and reconnaissance (ISR) missions lack desired endurance and loiter times, while the acoustics and thermal signatures of those configured with internal combustion engines (ICE) may make them unpractical for ISR. Outfitting RPA with parallel hybrid-electric propulsion systems (H-EPS) would meet the military's needs by combining the advantages of both systems while reducing fuel consumption and environmental impacts. An analysis tool was created, using constrained static optimization, to size the H-EPS components. Based on the RPA's required power and velocity for the endurance phase, an electric motor (EM) can …
Vision Aided Inertial Navigation System Augmented With A Coded Aperture, Jamie R. Morrison
Vision Aided Inertial Navigation System Augmented With A Coded Aperture, Jamie R. Morrison
Theses and Dissertations
Navigation through an indoor environment is a formidable challenge for an autonomous micro air vehicle. One solution is a vision aided inertial navigation system using depth-from-defocus to determine heading and depth to features in the scene. Depth-from-defocus uses a focal blur pattern to estimate depth. As depth increases, the observable change in the focal blur is generally reduced. Consequently, as the depth of a feature to be measured increases, the measurement performance decreases. The Fresnel zone plate, used as an aperture, introduces multiple focal planes. Interference between the multiple focal planes produce changes in the aperture that extend the depth …
Coupling Vanishing Point Tracking With Inertial Navigation To Estimate Attitude In A Structured Environment, Dayvid Prahl
Coupling Vanishing Point Tracking With Inertial Navigation To Estimate Attitude In A Structured Environment, Dayvid Prahl
Theses and Dissertations
This research aims to obtain accurate and stable estimates of a vehicle's attitude by coupling consumer-grade inertial and optical sensors. This goal is pursued by first modeling both inertial and optical sensors and then developing a technique for identifying vanishing points in perspective images of a structured environment. The inertial and optical processes are then coupled to enable each one to aid the other. The vanishing point measurements are combined with the inertial data in an extended Kalman filter to produce overall attitude estimates. This technique is experimentally demonstrated in an indoor corridor setting using a motion profile designed to …
Kernelized Locality-Sensitive Hashing For Fast Image Landmark Association, Mark A. Weems
Kernelized Locality-Sensitive Hashing For Fast Image Landmark Association, Mark A. Weems
Theses and Dissertations
As the concept of war has evolved, navigation in urban environments where GPS may be degraded is increasingly becoming more important. Two existing solutions are vision-aided navigation and vision-based Simultaneous Localization and Mapping (SLAM). The problem, however, is that vision-based navigation techniques can require excessive amounts of memory and increased computational complexity resulting in a decrease in speed. This research focuses on techniques to improve such issues by speeding up and optimizing the data association process in vision-based SLAM. Specifically, this work studies the current methods that algorithms use to associate a current robot pose to that of one previously …
Multiple Integrated Navigation Sensors For Improving Occupancy Grid Fastslam, Christopher P. Weyers
Multiple Integrated Navigation Sensors For Improving Occupancy Grid Fastslam, Christopher P. Weyers
Theses and Dissertations
An autonomous vehicle must accurately observe its location within the environment to interact with objects and accomplish its mission. When its environment is unknown, the vehicle must construct a map detailing its surroundings while using it to maintain an accurate location. Such a vehicle is faced with the circularly defined Simultaneous Localization and Mapping (SLAM) problem. However difficult, SLAM is a critical component of autonomous vehicle exploration with applications to search and rescue. To current knowledge, this research presents the first SLAM solution to integrate stereo cameras, inertial measurements, and vehicle odometry into a Multiple Integrated Navigation Sensor (MINS) path. …
Airborne Wind Energy: Implementation And Design For The U.S. Air Force, Troy L. Cahoon
Airborne Wind Energy: Implementation And Design For The U.S. Air Force, Troy L. Cahoon
Theses and Dissertations
Excitement among researchers about Airborne Wind Energy (AWE) technology matches DoD aims to advance and employ renewable energy. AWE seeks to cost-effectively tap the vast supply of wind energy available at altitudes high above the reach of conventional, ground-based wind turbines (e.g. 500-12,000m). This paper explores viability and implementation of AWE technology for fulfilling USAF energy needs. Characteristics, potential, and developmental status of the AWE resource are presented. A design tool for a rotor-based AWE system is developed, facilitating the analysis of blade performance to simplify design and provide the best efficiencies for a range of conditions. USAF bases are …
Implementation Of A Rule-Based Open-Loop Control Strategy For A Hybrid-Electric Propulsions System On A Small Rpa, Collin Greiser
Implementation Of A Rule-Based Open-Loop Control Strategy For A Hybrid-Electric Propulsions System On A Small Rpa, Collin Greiser
Theses and Dissertations
Currently fielded electric-powered small remotely-piloted aircraft (RPA) lack endurance desired by warfighters, and internal combustion engine (ICE) RPAs generate undesirable acoustic and thermal signatures. Hybrid-electric (HE) propulsion systems would combine both electric power for endurance and ICE power for cruise and climb modes. Use of HE systems would eliminate undesirable signatures in addition to providing considerable fuel savings over time. Five components were used in this HE system: the ICE, electric motor (EM), electromagnetic clutch, battery pack, and a propeller. Control of such a system in a small RPA has never been attempted before. A rulebased controller was developed to …
Small Internal Combustion Engine Testing For A Hybrid-Electric Remotely-Piloted Aircraft, Isseyas H. Mengistu
Small Internal Combustion Engine Testing For A Hybrid-Electric Remotely-Piloted Aircraft, Isseyas H. Mengistu
Theses and Dissertations
Efficient operation of a hybrid-electric propulsion system (HEPS) powering a small remotely-piloted aircraft (RPA) requires that a controller have accurate and detailed engine and electric motor performance data. Many small internal combustion engines (ICEs) currently used on various small RPA were designed for use by the recreational hobbyist radio-control (R/C) aircraft market. Often, the manufacturers of these engines do not make accurate and reliable detailed engine performance data available for their engines. A dynamometer testing stand was assembled to test various small ICEs. These engines were tested with automotive unleaded gasoline (the manufacturer's recommended fuel) using the dynamometer setup. Torque, …
Two Dimensional Positioning And Heading Solution For Flying Vehicles Using A Line-Scanning Laser Radar (Ladar), Brady T. Christel
Two Dimensional Positioning And Heading Solution For Flying Vehicles Using A Line-Scanning Laser Radar (Ladar), Brady T. Christel
Theses and Dissertations
Emerging technology in small autonomous flying vehicles requires the systems to have a precise navigation solution in order to perform tasks. In many critical environments, such as indoors, GPS is unavailable necessitating the development of supplemental aiding sensors to determine precise position. This research investigates the use of a line scanning laser radar (LADAR) as a standalone two dimensional position and heading navigation solution and sets up the device for augmentation into existing navigation systems. A fast histogram correlation method is developed to operate in real-time on board the vehicle providing position and heading updates at a rate of 10 …
Airborne Pseudolites In A Global Positioning System Degraded, Halit Oktay
Airborne Pseudolites In A Global Positioning System Degraded, Halit Oktay
Theses and Dissertations
The high accuracy of the Global Positioning System allows for precision navigation in support of current and future military operations. However, generating a three-dimensional position using GPS requires a clear line-of-sight between the user and at least four GPS satellites, and so the GPS service can be denied in scenarios such as a street surrounded by tall buildings. Therefore, there is a need for augmentation in these environments. Pseudolites, which transmit GPS-like ranging signals, can be deployed in order to improve the geometry and provide additional ranging signals. Users can then receive and process both GPS and pseudolite signals simultaneously …
Long Term Quadrotor Stabilization, Nicolas S. Hamilton
Long Term Quadrotor Stabilization, Nicolas S. Hamilton
Theses and Dissertations
The work of this thesis focuses on the IMU and getting the best performance possible out of the IMU to achieve better long term stability and a better navigation solution. This is done in two ways. First, the IMU accelerometer output is examined to determine if it is possible to use accelerometers to determine attitude. If the quadrotor is stationary or moving at constant velocity, the roll and pitch angles can be determined. Additionally, the accelerometers can be used to determine angular accelerations and angular rates which are integrated to determine heading. The second approach models the quadrotor and uses …
Non-Gps Navigation Using Vision-Aiding And Active Radio Range Measurements, Erich H. Lichtfuss
Non-Gps Navigation Using Vision-Aiding And Active Radio Range Measurements, Erich H. Lichtfuss
Theses and Dissertations
The military depends on the Global Positioning System (GPS) for a wide array of advanced weaponry guidance and precision navigation systems. Lack of GPS access makes precision navigation very difficult. Inclusion of inertial sensors in existing navigation systems provides short-term precision navigation, but drifts significantly over long-term navigation. This thesis is motivated by the need for inertial sensor drift-constraint in degraded and denied GPS environments. The navigation system developed consists of inertial sensors, a simulated barometer, three Raytheon DH500 radios, and a stereo-camera image-aiding system. The Raytheon DH500 is a combat communication radio which also provides range measurements between radios. …
Signals Of Opportunity Navigation Using Wi-Fi Signals, Wilfred E. Noel
Signals Of Opportunity Navigation Using Wi-Fi Signals, Wilfred E. Noel
Theses and Dissertations
Since GPS is generally limited to areas with clear sky view, additional methods of navigation are currently being explored. This thesis explores navigation using Signals of Opportunity(SoOP). The signals chosen for evaluation in this thesis are the common Internet IEEE 802.11a/g signals, or Wi-Fi. This thesis presents SoOP navigation based on cross-correlations of received data from multiple Wi-Fi stations. It shows the effectiveness of the methods using collected Wi-Fi signals in a real-world environment. By using simple statistical representations of collected data in large groups, or windows, cross-correlation calculations can produce timing offsets between simulated stations. The timing offsets, or …