Aerospace Engineering Commons^™

Notes For Contributors, Space And Defense

Space and Defense

No abstract provided.

Waging Peace On The Final Frontier 64th Academy Assembly Proceedings, Space And Defense, Madison Walker

Space and Defense

In October 2022, the 64th annual Academy Assembly at the U.S. Air Force Academy took up the theme of “Waging Peace on the Final Frontier.” The following are proceedings of roundtables held by select undergraduates from around the country on questions of space policy & strategy.

Revitalizing America's Low-Yield Deterrent, Alex Kleitz

Space and Defense

An array of low-yield weapons will play a vital role in integrated deterrence. *The following essay, submitted in June 2022, earned the Junior Division USSTRATCOM General Larry D. Welch Deterrence Writing Award.

Annual Truman Lecture Usafa 64th Academy Assembly, John Shaw

Space and Defense

In October 2022, on the occasion of the 64th annual Academy Assembly, focused on “Waging Peace on the Final Frontier,” the deputy commander of USSPACEOM Lieutenant General John Shaw spoke at the Air Force Academy’s endowed Truman Lecture, which itself was created to inspire cadets toward careers in National Security leadership.

Usafa 64th Academy Assembly Banquet Keynote On Nasa Transformation, Madison Walker, Lori Garver

Space and Defense

In October 2022, at the 64th annual Academy Assembly, focused on “Waging Peace on the Final Frontier,” the former deputy administrator of NASA the Honorable Lori Garver spoke at the Air Force Academy’s 64th Academy Assembly banquet keynote on the implications of NASA transformation for international security. She was introduced in a pre-recorded video by Susan Eisenhower, honorary founder of USAFA’s Eisenhower Center, and interviewed by USAFA Institute for Future Conflict Fellow Madison Walker.

The Unified Command Plan For A New Cold War, David Stilwell

Space and Defense

No abstract provided.

Protecting The Cosmos: Defining Celestial Bodies In The Outer Space Treaty, David Epstein

Space and Defense

Lack of a clear definition of the term “celestial bodies” as used in the 1967 Outer Space Treaty risks exporting legal and political conflict into the cosmos. *This essay is updated from a previously published version and appears here by permission of the Journal of Space Law at Ole Miss.

Editor's Note, Damon Coletta

Space and Defense

No abstract provided.

Table Of Contents, Space And Defense

Space and Defense

No abstract provided.

Front Matter, Space And Defense

Space and Defense

No abstract provided.

Space And Defense Volume 15 No. 1 Spring 2024 (Whole Issue), Space And Defense

Space and Defense

No abstract provided.

Computational Fluid Dynamics Visualization For Unmanned Aerial Systems In Bridge Inspections, Kristoffer B. Borgen, John Mott

Journal of Aviation Technology and Engineering

Bridge inspections are an expensive and time-consuming process, varying significantly with a bridge’s style, height, width, and length. Inspections create interruptions that interfere with bridge use, as the examination requires partial or total closure, causing traffic delays. Unmanned aerial system (UAS) use has increased significantly over the past decade, including assistance and coordination during bridge inspections. However, the impact on a UAS from high winds and turbulent airflows induced by a bridge’s structure can decrease flight safety during inspections. Visualization of these hazards is difficult for UAS operators; therefore, a process to estimate the velocity and locations of these hazardous …

Using A Neural Network To Remove Noise From Images, Anvar Asatilloyevich Ravshanov

Chemical Technology, Control and Management

This article proposes modern approaches to the problem of noise reduction in images using neural networks and also analyses the possibilities of noise reduction using neural networks. The convolutional neural network model and the Mediana, Sobel filter were considered for image denoising. The quality improvement of the trained neural network and the comparison with classical noise reduction methods have been carried out.

New Frontier In Race For Deep Space Exploration: Lunar Water Resources, Yong Wei, Honglei Lin, Fei He, Hui Zhang

Bulletin of Chinese Academy of Sciences (Chinese Version)

Deep space exploration has become the commanding heights of science and technology competition. Since the beginning of the 21st century, China has successfully completed the lunar exploration missions of “orbiting, landing, and returning” in just twenty years, and upgraded to a new roadmap of “survey, construction, and utilization”. Meanwhile, lunar exploration worldwide has shown a trend towards normalization and commercialization. The research on lunar water resources has sparked widespread interest and intense competition among countries and space agencies, marking a new focus in human’s deep space exploration. The exploration of lunar water can help reveal crucial processes in the formation …

Winning Battle For Key And Core Technologies In Emerging Fields—Inspiration Based On 863 Program Related Projects, Guangzu Bai, Li Li, Hongfei Meng, Qiang Wang, Xiaoyang Cao, Anrong Liu, Bo Cheng, Mimi Zhan, Jing Li, Leiei Cui, Xiangwan Du

Bulletin of Chinese Academy of Sciences (Chinese Version)

Emerging technology fields have become the main battleground for strategic competition among major powers today, with key and core technologies serving as crucial approach in shaping a nation’s international competitive advantage. This study, from the perspective of national strategy, profoundly understands the significant importance of winning the key and core technology battle in emerging fields. Based on this understanding, it starts with a comparison between the implementation background of the 863 Program and the current reality. It systematically summarizes valuable experiences from projects aimed at advancing key and core technologies in emerging fields, and puts forward reflections and suggestions for …

Regular Algorythms For Synthesis Of Optimal Control Systems For Dynamic Objects, Igamberdiyev Husan, Uktam Farkhodovich Mamirov, Xankeldiyeva Zebiniso

Technical science and innovation

The article presents algorithms for the synthesis of an optimal control system for dynamic objects. As a model, we consider a differential equation of a continuous one-dimensional system in the form of a state space, which has the properties of controllability and observability. The paper shows the need to use an observation device in order to assess how the properties of the controlled system change with the slightest change in the parameters of the control object, to assess the sensitivity of the system to these changes. When finding a solution to the equation formulated to find the parameters of the …

Studying The Production Of Nanocelluloses, Shohzodbek Abduvahobovich Rashidov, Elmurod Abduqodirovich Egamberdiev, Sadritdin Maxamatdinovich Turabdjanov

Technical science and innovation

Nanoscience is a broad field that includes nanophysics and nanochemistry. Nanotechnologies are aimed at obtaining nanoparticles with new properties and creating materials and devices based on them. This is one of the modern trends in the development of science in the 21st century.

Based on the study of information about nano-sized materials, the mechanisms of their production and changes in their properties, we will consider the technology for producing nanocellulose from organic substances, i.e. from cellulose. The article describes a technology that examines devices for producing nanocellulose and the principles of their operation, as well as a combined method of …

Comparative Analysis Of Cutting Forces In Axial-Compliant And Rigid Chamfering Tools, Sultonmurod Bekpulatovich Normatov, Oybek Tuyboyov, Azimjon Axror O'G'Li Pardayev, Alisher G‘Ayratjon Ogli Boratov, Shohjahon Tuxtasin Ogli Abdullayev

Technical science and innovation

This study delves into the analysis of cutting forces in axial-compliant systems, focusing specifically on the comparison between axially spring-compensated 90° conical tools and rigid chamfering tools. The research incorporates a predictive model for chamfer size calculation in the axially spring-compensated tools, verified through experimental tests on representative parts. The study aims to control chamfer size within tolerances by adjusting process conditions and optimizing processing efficiency. By exploring the fundamentals of the chamfering process, this research offers insights into breaking sharp edges on components with positional errors and shape deformations, with a particular emphasis on aero-engine casings. The integration of …

Reducing Glass Loss During Transportation And Storage, Abdulaziz Muzafarovich Qurbanov, Mirzaabdullayev Jaxongir Baxtiyorovich

Technical science and innovation

The article discusses the processes of transportation and storage of sheet glass in the production of protective glass for cars. The experience of organizing the transportation and storage of glass in developed countries of the world was analyzed in order to study the problems of losses of raw materials during the transportation and storage of laminated glass, as well as to develop and approve a regulatory and technical document. in this field. The supplies of various brands of polished laminated glass used in the production of protective glass for cars to Avtooina LLC from different addresses, from different manufacturers were …

Main Prospects Of Natural Gas Purification Technologies From Acidic Compounds, Oybek Yusupdjanovich Aripdjanov, Diyora Zokhid Qizi Khayrullaeva, Jonibek Avazek Ogli Abdumuminov

Technical science and innovation

The article discusses the main prospects for the technology of purifying natural gas from acidic components and the problems of ensuring the purity of oil and gas products in accordance with state standards. An increase in the degree of purification from H₂S, CO₂, elemental sulfur, carbonyl sulfide, ethyl mercaptans (thiols), methyl mercaptan, carbon disulfide, sulfides, disulfides (dithioethers), thiophene, sulfoxides and sulfones is considered. Also, the physicochemical properties of the absorbent for the purification of sulfur compounds (generated during natural gas processing) are studied. Based on the study of various absorbents (ethanolamine (EA), methylethanolamine (MEA), diethanolamine (DEA), …

Ferroresonance In Three-Phase Electrical Networks, Shavkat Ernstovich Begmatov

Technical science and innovation

Possible modes of ferroresonance in three-phase electric networks and analysis of substitution schemes where ferroresonance voltage increase is observed are considered. The most complete magnetization curve of the transformer core and the analysis of the generalized equivalent substitution scheme are presented, as a result of which more accurate formulas for determining the values of equivalent parameters of the electrical network and voltage transformer in ferroresonance mode are obtained. Factor of ferroresonance voltage increase is introduced, which determines ratio between amplitude values of transformer phase voltage and mains voltage. The method of determination of boundary conditions of steady ferroresonance voltage increase …

Successful Rocket Launch In Argonia, Seungyou Cho

SACAD: John Heinrichs Scholarly and Creative Activity Days

The object of launching the PK-56 (The name of the kit) rocket is how to take off and land safely using the parachute deployment. To inspect the engineering process, I tried to get an L1 certification from Tripoli Rocketry Association who is judging whether the rocket was flying stable. This consisted of building the structure, deployment system, engine system, anddesigning process. The most important thing was to read the instructions thoroughly, and to build a safe rocket.

Since launching high-power rockets needs a comprehensive understanding of those processes, I tested with small rocket with a motor that impulses 1.26 N …

Solving Water Resources Problems - Water Saving In The Republic Of Uzbekistan, Rustam Muxammatdjanovich Raximov

Technical science and innovation

In this article we will talk about the problems of water resources in the Republic of Uzbekistan. The problem of drinking water supply, solutions to provide drinking water to the population of Uzbekistan. The largest consumers of fresh water in Uzbekistan are farmers. Due to outdated infrastructure, 40% of water is wasted. Rising food prices and the risk of spreading disease are the first signs of water shortages that we may experience in the coming еars. Uzbekcosmos told how to solve the problem. Water is an invaluable resource used not only in the home, but also in the production and …

Selective Oxidation Of Iron In Chalcopyrite For Enhanced Copper Recovery, Khojiakbar Shuxrat O'G'Li Sultonov, Shokhrukh Toshpulatovich Khojiev, Gulnoza Berdiyor Qizi Beknazarova, Malika Sayfullayevna Saidova

Technical science and innovation

This study explores the thermodynamic feasibility of selectively oxidizing iron contained in chalcopyrite mineral while preventing the oxidation of copper sulphide, with the ultimate goal of enhancing the copper concentration in the sulphide concentrate. A redox reaction in the solid phases between chalcopyrite and copper (I) oxide was constructed and subjected to thermodynamic analysis. The research identifies a crucial temperature range of 498-598 K (225-325 °C) as the most favourable for the redox reaction. The equilibrium constants at the selected optimal temperatures, 1.152 for chalcopyrite and 1.137 for copper (I) oxide, indicate that the redox reaction adheres to the expected …

Use Of Mathematical Skills For Technical Condition Assessment Of Power Autotransformers, Dilafruz Rustamjon Qizi Abdullabekova, Nurali Berdiyorovich Pirmatov

Technical science and innovation

In this paper, we review innovative approaches to assess the technical condition of autotransformers using mathematical methods. The main purpose of these methods is to increase the efficiency of diagnostics and prevent possible failures in power systems. The developed mathematical expression is based on complex data analysis, application of statistical methods and machine learning technologies. This makes it possible to achieve more accurate and earlier detection of potential problems. As a result of these innovative approaches, the possibilities for early detection and prevention of faults are significantly increased. This is important for ensuring the smooth operation of power systems and …

Modelling Of Heat Transfer In An Air Solar Collector, Shakhnoza Abduvaxitovna Sultanova, Jasur Esirgapovich Safarov, A.A. Mambetsheripova

Technical science and innovation

This study is the prediction, depending on time and different geographical and climatic situations, of different operating parameters: solar radiation, ambient and outlet coolant temperature, heat exchange coefficients and losses. All these determine, in the absence of measurements, the efficiency of the system modelled with existing models with respect to these parameters. These models are usually compared with experimental results. Before modelling, it is necessary to investigate the different heat transfer and exchange regimes that exist between the different elements of this system in order to eventually have a system of equations governing this exchange. The modelling principle is to …

Research Of The Influence Of Dust On Photovoltaic Modules, Anvarjon Mirolimov, Xalmurat Iliev

Technical science and innovation

The influence of dust concentrations on the current-voltage characteristics (voltampere characteristics) of photovoltaic modules (PVM) based on crystalline silicon in laboratory conditions. It was investigated how an uncleaned panel affects the output power. The tests were carried out in the city of Tashkent on the territory of the “National Research Institute of Renewable Energy Sources”. The objects were located co-plurally as specified in GOST R 60904-1 Photoelectric devices. Part 1. Measurement of current-voltage characteristics. Measurements of a cleaned photovoltaic module with a maximum power of 330 W and not a cleaned one of 236 W were obtained. Based on the …

Quantitative Assessment And Characterization Of Tool Wear Phenomena In Advanced Manufacturing Processes, Oybek Valijonovich Tuyboyov

Technical science and innovation

This paper explores the quantitative assessment and characterization of tool wear phenomena in advanced manufacturing processes, employing a multifaceted approach encompassing traditional measurements, image processing, machine learning, and predictive modeling. The study emphasizes the intricate dynamics of tool wear and its direct impact on cutting tool performance, addressing challenges in real-time monitoring and optimization of machining operations. Traditional methods like VBmax measurement are juxtaposed with advanced techniques such as the improved conditional generative adversarial net with a high-quality optimization algorithm (CGAN-HQOA), efficient channel attention destruction and construction learning (ECADCL), and shape descriptors based on contour, moments, orientations, and texture. Artificial …

A Study On The Influence Of Cutting Parameters On Surface Roughness And Visualization Through Contour Plots And 3d Surface Profiles, Zayniddin Nosirovich Muxiddinov

Technical science and innovation

This research investigates the intricate relationship between cutting parameterscutting speed, feed rate, and depth of cut and surface roughness in machining processes. Surface roughness is a key determinant of machined surface quality, and optimizing cutting parameters is crucial for achieving superior finishes. Employing advanced visualization techniques, including contour plots and 3D surface profiles, the study offers a comprehensive exploration of surface topography dynamics. Statistical analyses and regression modeling enhance the quantitative understanding of how cutting parameters interact to shape surface roughness. The research affirms the significant influence of cutting speed, feed rate, and depth of cut, providing practical insights for …

Implementing A Solar Photovoltaic Station In Watering Systems Utilizing Complex Software, Akbarxon Sarvar O'G'Li Uroqov, Faxriddin Jaylovovich Nosirov, G'Olibjon Pardayevich Arzikulov, Zarina Amriddin Qizi Sayfutdinova

Technical science and innovation

This article explores the benefits of transitioning from traditional agricultural irrigation systems to more cost-effective alternatives powered by renewable energy sources. By integrating solar photovoltaic technology into irrigation processes, significant reductions in resource wastage, estimated at 45-50%, are achievable through the implementation of drip irrigation techniques. This results in enhanced agricultural productivity. Moreover, the utilization of solar panels in green zones mitigates surface temperature increases, contributing to a 2-5% boost in electricity production. Currently, irrigation facilities primarily rely on the main energy grid. However, transitioning to renewable energy sources decreases reliance on non-renewable fuels, reduces greenhouse gas emissions, and fosters …