Aerospace Engineering Commons^™

Autonomous Strike Uavs For Counterterrorism Missions: Challenges And Preliminary Solutions, Meshari Aljohani, Ravi Mukkamala, Stephan Olariu

Computer Science Faculty Publications

UAVs are becoming a crucial tool in modern warfare, primarily due to their cost-effectiveness, risk reduction, and ability to perform a wider range of activities. The use of autonomous UAVs to conduct strike missions against highly valuable targets is the focus of this research. Due to developments in ledger technology, smart contracts, and machine learning, such activities formerly carried out by professionals or remotely flown UAVs are now feasible. Our study provides the first in-depth analysis of challenges and potential solutions for successful implementation of an autonomous UAV mission.

A Comparative Study Of Vinti-Based Orbit Propagation And Estimation For Cubesats In Very Low Earth Orbits, Ethan Michael Senecal

Mechanical & Aerospace Engineering Theses & Dissertations

In recent years, there has been a growing interest in CubeSats and very low Earth orbit (VLEO) space missions. Mission SeaLion, a collaborative CubeSat mission between Old Dominion University, the U.S. Coast Guard Academy, and U.S. Air Force Institute of Technology, planned to launch a 3U CubeSat into VLEO. The VLEO mission is a particularly challenging environment for navigation and orbit propagation because drag introduces a significant perturbation for orbit models such as SGP4. Additionally, mission requirements left no capacity for attitude determination or control, further reducing knowledge of drag behavior of the satellite in flight. This deficiency is a …

Exploring Additive Manufacturing In A Space Environment - A Capstone Design Project Experience, Zain Zafar Khan, Zachary Alan Sobelman, Sharanabasaweshwara Asundi

Mechanical & Aerospace Engineering Faculty Publications

The employment of additive manufacturing in the non-standard environments like space, ships, or submarines has the potential to be an advanced utility not only in the pre-flight production of aerospace components and structures, but also for the onboard manufacturing of components and tools necessary for future space missions. For example, the ability to produce tools and structural components on the International Space Station can provide the space community the opportunity to make repairs and upgrades to the space station without wasting time and resources transporting such materials through additional missions. Additive manufacturing would allow for space missions to use on …

Underwater Communication Acoustic Transducers: A Technology Review, Laila Shams, Tian-Bing Xu, Zhongqing Su (Ed.), Branko Glisic (Ed.), Maria Pina Limongelli (Ed.)

Mechanical & Aerospace Engineering Faculty Publications

This paper provides a comprehensive review on transducer technologies for underwater communications. The popularly used communication transducers, such as piezoelectric acoustic transducers, electromagnetic acoustic transducers, and acousto-optic devices are reviewed in detail. The reasons that common air communication technologies are invalid die to the differences between the media of air and water are addresses. Because of the abilities to overcome challenges the complexity of marine environments, piezoelectric acoustic transducers are playing the major underwater communication roles for science, surveillance, and Naval missions. The configuration and material properties of piezoelectric transducers effects on signal output power, beamwidth, amplitude, and other properties …

Critical Space Infrastructure: A Complex System Governance Perspective, Adrian V. Gheorghe, James C. Pyne, Joseph Sisti, Charles B. Keating, Polinpapilinho F. Katina, William Edmonson

Engineering Management & Systems Engineering Faculty Publications

This paper examines the applicability of Complex System Governance (CSG) to advance the Critical Space Infrastructure field (CSI). CSI encompasses space related hardware, workforce, environment, facilities, and businesses that are necessary for societal well-being. CSI is increasing in importance as more societal serving systems are becoming dependent on CSI to operate. Given this increasing dependence on CSI, societal sectors are increasingly at risk should something go wrong with CSI upon which they depend. CSI has been developing is a fragmented way and lacks coherent organization. CSG is focused on design, execution, and evolution of system functions that provide for communications, …

Strengthening Urban Resilience: Understanding The Interdependencies Of Outer Space And Strategic Planning For Sustainable Smart Environments, Ulpia-Elena Botezatu, Olga Bucovetchi, Adrian V. Gheorghe, Radu D. Stanciu

Engineering Management & Systems Engineering Faculty Publications

The conventional approach to urban planning has predominantly focused on horizontal dimensions, disregarding the potential risks originating from outer space. This paper aims to initiate a discourse on the vertical dimension of cities, which is influenced by outer space, as an essential element of strategic urban planning. Through an examination of a highly disruptive incident in outer space involving a collision between the Iridium 33 and Cosmos 2251 satellites, this article elucidates the intricate interdependencies between urban areas and outer space infrastructure and services. Leveraging the principles of critical infrastructure protection, which bridge the urban and outer space domains, and …

Influence Of The Inherent Safety Principles On Quantitative Risk In Process Industry: Application Of Genetic Algorithm Process Optimization (Gapo), Mehdi Jahangiri, Abolfazl Moghadasi, Mojtaba Kamalinia, Farid Sadeghianjahromi, Sean Banaee

Community & Environmental Health Faculty Publications

Inherent safety (IS) refers to a set of measures that enhance the safety level of processes and equipment, rendering additional equipment and/or add-ons. The early design phase of processes is suited best for implementation of IS strategies as some of such strategies either are impossible to be implemented at the operation phase or substantially increase costs. The purpose of this study is to present a new approach called genetic algorithm process optimization (GAPO), by which processes can be made inherently safer even at the operation phase. This study simulates the IS principle, assessing its impact on quantitative risk and the …

Time Domain Boundary Element Method Prediction Of Noise Shielding By A Naca 0012 Airfoil, Douglas M. Nark, Fang Q. Hu

Mathematics & Statistics Faculty Publications

As aircraft noise constraints become more stringent and the number/mixture of aircraft configurations grows, it becomes more important to understand the interaction of individual aircraft noise sources with nearby aircraft structures. Understanding these interactions and exploring possible approaches to mitigate or exploit their acoustic impact is essential for overcoming key noise barriers. This paper describes the further validation of a time domain boundary element approach for the prediction of the interactions between incident noise sources and nearby aircraft structures. Predictions were completed for multiple source locations and comparisons of these results with measured data are presented. Overall, very good agreement …

Deep Learning For Remote Sensing Image Processing, Yan Lu

Computational Modeling & Simulation Engineering Theses & Dissertations

Remote sensing images have many applications such as ground object detection, environmental change monitoring, urban growth monitoring and natural disaster damage assessment. As of 2019, there were roughly 700 satellites listing “earth observation” as their primary application. Both spatial and temporal resolutions of satellite images have improved consistently in recent years and provided opportunities in resolving fine details on the Earth's surface. In the past decade, deep learning techniques have revolutionized many applications in the field of computer vision but have not fully been explored in remote sensing image processing. In this dissertation, several state-of-the-art deep learning models have been …

Effects Of Auditory Vection Speed And Directional Congruence On Perceptions Of Visual Vection, Isabella Alexis Gagliano

Psychology Theses & Dissertations

Spatial disorientation is a major contributor to aircraft mishaps. One potential contributing factor is vection, an illusion of self-motion. Although vection is commonly thought of as a visual illusion, it can also be produced through audition. The purpose of the current experiment was to explore interactions between conflicting visual and auditory vection cues, specifically with regard to the speed and direction of rotation. The ultimate goal was to explore the extent to which aural vection could diminish or enhance the perception of visual vection. The study used a 3 × 2 within-groups factorial design. Participants were exposed to three levels …

The Relationship Among Hfacs Levels And Analysis Of Human Factors In Unmanned And Manned Air Vehicles, Veysel Yesilbas

Engineering Management & Systems Engineering Theses & Dissertations

This dissertation analyzes the structural relationships among the Human Factors Accident Classification System levels for unmanned air vehicle and manned air vehicle accidents and the common relationships between unmanned air vehicle and manned air vehicle accident causes. The study acquired DOD HFACS accident classification data from 347 United States Air Force Class A accident reports for the years between 2000 and 2013.

The dissertation utilized a set of analysis that is considered to contribute substantially to the respective domain of the study. The correlations found among categorical levels were applied to HFACS taxonomy based on the Reason Model via path …

Evaluating Network Analysis And Agent Based Modeling For Investigating The Stability Of Commercial Air Carrier Schedules, Sheila Ruth Conway

Engineering Management & Systems Engineering Theses & Dissertations

For a number of years, the United States Federal Government has been formulating the Next Generation Air Transportation System plans for National Airspace System improvement. These improvements attempt to address air transportation holistically, but often address individual improvements in one arena such as ground or in-flight equipment.

In fact, air transportation system designers have had only limited success using traditional Operations Research and parametric modeling approaches in their analyses of innovative operations. They need a systemic methodology for modeling of safety-critical infrastructure that is comprehensive, objective, and sufficiently concrete, yet simple enough to be deployed with reasonable investment. The methodology …

Seasonal Adaptation Of Vegetation Color In Satellite Images, Srinivas Jakkula, Vamsi K.R. Mantena, Ramu Pedada, Yuzhong Shen, Jiang Li, Hamid R. Arabnia (Ed.)

Electrical & Computer Engineering Faculty Publications

Remote sensing techniques like NDVI (Normal Difference vegetative Index) when applied to phenological variations in aerial images, ascertained the seasonal rise and decline of photosynthetic activity in different seasons, resulting in different color tones of vegetation. The rise and fall of NDVI values decide the biological response, either the green up or brown down [1]. Vegetation in green up period appears with more vegetative vigor and during brown down period it has a dry appearance. This paper proposes a novel method that identifies vegetative patterns in satellite images and then alters vegetation color to simulate seasonal changes based on training …

Robustness And Control Of A Magnetically Levitated Transportation System, Grzegorz Oleszczuk

Mechanical & Aerospace Engineering Theses & Dissertations

Electromagnetic suspension of Magnetic Levitation Vehicles (Maglev) has been studied for many years as an alternative to wheel-on rail transportation systems. In this work, design and implementation of control systems for a Maglev laboratory experiment and a Maglev vehicle under development at Old Dominion University are described. Both plants are modeled and simulated with consideration of issues associated with system non-linearity, structural flexibility and electromagnetic force modeling. Discussion concerning different control strategies, namely centralized and decentralized approaches are compared and contrasted in this work. Different types of electromagnetic non-linearities are considered and described to establish a convenient method for modeling …

Pilot Performance And Eye Movement Activity With Varying Levels Of Display Integration In A Synthetic Vision Cockpit, Julie Michele Stark

Psychology Theses & Dissertations

The primary goal of the present study was to investigate the effects of display integration in a simulated commercial aircraft cockpit equipped with a synthetic vision display. Combinations of display integration level (low/high), display view (synthetic vision view/traditional display), and workload (low/high) were presented to each participant. Sixteen commercial pilots flew multiple approaches under IMC conditions in a moderate fidelity fixed-base part-task simulator. Pilot performance data, visual activity, mental workload, and self-report situation awareness were measured.

Congruent with the Proximity Compatibility Principle, the more integrated display facilitated superior performance on integrative tasks (lateral and vertical path maintenance), whereas a less …

Approximation Model Building For Reliability & Maintainability Characteristics Of Reusable Launch Vehicles, Resit Unal, W. Douglas Morris, Nancy H. White, Roger A. Lepsch, Richard W. Brown

Engineering Management & Systems Engineering Faculty Publications

This paper describes the development of parametric models for estimating operational reliability and maintainability characteristics for reusable launch vehicle concepts, based on vehicle size and technology support level. A reliability and maintainability analysis tool (RMAT) and response surface methods are utilized to build parametric approximation models for rapidly estimating operational reliability and maintainability characteristics such as mission completion reliability. These models that approximate RMAT, can then be utilized for fast analysis of operational requirements, for lifecycle cost estimating and for multidisciplinary design optimization.

A Total Systems Analysis Method For The Conceptual Design Of Spacecraft: An Application To Remote Sensing Imager Systems, Knut I. Oxnevad

Engineering Management & Systems Engineering Theses & Dissertations

Increased emphasis is being placed on improving the performance of space projects, within tighter budgets and shorter development times. This has led to a need for more efficient space system design methods. The research described here represents an effort to develop and evaluate such a method.

Systems engineering and concurrent engineering together provide the theoretical foundation for the method. The method, derived from both this theoretical foundation and ideas from experts in the space industry, emphasizes a total systems analysis approach, taking into account given mission requirements, and the mathematical modeling of interactions between system variables and between subsystems. The …

Integrated Control Of Thermally Distorted Large Space Antennas, Robert H. Tolson

Mechanical & Aerospace Engineering Theses & Dissertations

Studies on controlling the thermal distortion of large space antennae have generally investigated a single orbital position and have optimized actuator locations based on minimizing the RMS surface deviation from the original parabolic shape. One study showed the benefits of directly using far zone electric field characteristics as the performance measure; but, this approach resulted in a nonlinear programming problem. The objective of the current study is to develop an approach to designing a control system that (1) recognizes the time dependence of the distortion and (2) controls variables that are directly related to far field performance in a quadratic …