Open Access. Powered by Scholars. Published by Universities.®
- Keyword
-
- Acoustic modulation (1)
- Additive manufacturing (1)
- Ceramic manufacturing (1)
- Ceramic turbine rotor (1)
- Combustion (1)
-
- Direct numerical simulations (1)
- Flame describing function (1)
- Fluid (1)
- G-equation (1)
- Hypersonic (1)
- Linear analysis (1)
- Low thrust (1)
- Model (1)
- Nozzle (1)
- Quasi-1D (1)
- Reduced-order model (1)
- Scramjet (1)
- Small gas turbine engine (1)
- Small satellite (1)
- Small scale engine (1)
- Turbine rotors (1)
- Ultra-compact combustors (1)
Articles 1 - 6 of 6
Full-Text Articles in Aerospace Engineering
Quasi 1d Modelling Of A Scramjet Engine Cycle Using Heiser-Pratt Approach, Asmaa Chakir
Quasi 1d Modelling Of A Scramjet Engine Cycle Using Heiser-Pratt Approach, Asmaa Chakir
Theses and Dissertations
Scramjet engines are key for sustained hypersonic flights. Analytic models play a critical role in the preliminary design of a scramjet engine configuration. The objective of this research is to develop and validate a quasi-1D model for the scramjet engine encompassing inlet, isolator and combustor, to evaluate the impact of flight conditions and design parameters on the engine functionality. The model is developed assuming isentropic flow in the inlet with a single turn; modified Fanno-flow equations in the isolator that account for the area change of the core flow; and the combustor is modeled using Heiser-Pratt equations accounting for the …
Performance Study Of Post-Processed Additively Manufactured Low Thrust Nozzles, Tyler W. Gerhold
Performance Study Of Post-Processed Additively Manufactured Low Thrust Nozzles, Tyler W. Gerhold
Theses and Dissertations
This research explores metal post-processing techniques to effectively reduce the large anomalous protrusions found in small additively manufactured low thrust rocket nozzles. Research has found that nozzles of this kind can experience losses in thrust of over 40%. Analytic theory of adiabatic nozzle flow with viscous losses for additively manufactured nozzles does not align with what has been found when tested experimentally. Compressible flow losses, such as shock wave formation inside the nozzle diverging cone, are likely the leading causes of such loss. Reduction in nozzle irregularities can likely yield results seen in analytic theory with similar performance to traditional …
Direct Simulation And Reduced-Order Modeling Of Premixed Flame Response To Acoustic Modulation, Zheng Qiao
Direct Simulation And Reduced-Order Modeling Of Premixed Flame Response To Acoustic Modulation, Zheng Qiao
Theses and Dissertations
This dissertation introduces a general, predictive and cost-efficient reduced-order modeling (ROM) technique for characterization of flame response under acoustic modulation. The model is built upon the kinematic flame model–G-equation to describe the flame topology and dynamics, and the novelties of the ROM lie in i) a procedure to create the compatible base flow that can reproduce the correct flame geometry and ii) the use of a physically-consistent acoustic modulation field for the characterization of flame response. This ROM addresses the significant limitations of the classical kinematic model, which is only applicable to simple flame configurations and relies on ad-hoc models …
Manufacturing Of A Ceramic Turbine Rotor For A Compact Jet Engine, Bryan T. Leicht
Manufacturing Of A Ceramic Turbine Rotor For A Compact Jet Engine, Bryan T. Leicht
Theses and Dissertations
The primary goal of this study was to develop a low-cost, timely, scalable manufacturing method that produced a ceramic turbine that can be tested as a drop-in replacement on a JetCat P400 small scale gas turbine engine. This research compared two processes for manufacturing a ceramic turbine utilizing a pour casting method and 3D printing using stereolithography ceramic manufacturing (SLCM). The pour casting method used Silicon Nitride to create a cast turbine using a sacrificial 3D printed mold. The SLCM method evaluated producing an alumina turbine using an ADMATEC Admaflex 300 SLCM printer to directly print a ceramic turbine. This …
Design And Application Of Compact Combustors In Small-Scale Jetcat Engines, Nathan A. Clark
Design And Application Of Compact Combustors In Small-Scale Jetcat Engines, Nathan A. Clark
Theses and Dissertations
Ultra-compact combustors (UCC) are an innovative approach to improving overall engine efficiency and thrust-to-weight ratio by reducing the axial length and weight of the engine. Previous efforts looked at integrating a UCC into a small-scale JetCat P90 engine utilizing gaseous propane fuel. The current investigation aimed to utilize the previous compact combustor design and switch fuels to liquid kerosene. Based on the results from testing, a new combustor was designed equipped with a different flame holding mechanism at the larger P400-scale while maintaining a length savings of 20%. Testing of the P400 compact combustors was performed within a newly designed …
Design Of An Electro-Thermal Nanosatellite Propulsion System, James H. Founds
Design Of An Electro-Thermal Nanosatellite Propulsion System, James H. Founds
Theses and Dissertations
This research focused on designing an arcjet system with water as the propellant. Previous research developed a compact, reliable, and safe propellant storage and feed system. The goal is to combine the arcjet with the previous tank to achieve thrust and specific impulse characteristics greater than cold gas or resistojet system. This platform features a 1 U, non-hazardous, and sub-kilowatt powered propulsion system for nanosatellites. A simplified analysis of the design predicts thrust and specific impulse greater than can be achieved by cold gas or resistojet thrusters. Testing resulted in oxidation of the electrodes raising concerns about the longevity of …