Aerospace Engineering Commons^™

On-Board Artificial Intelligence For Failure Detection And Safe Trajectory Generation, Eduardo Morillo

Doctoral Dissertations and Master's Theses

The use of autonomous flight vehicles has recently increased due to their versatility and capability of carrying out different type of missions in a wide range of flight conditions. Adequate commanded trajectory generation and modification, as well as high-performance trajectory tracking control laws have been an essential focus of researchers given that integration into the National Air Space (NAS) is becoming a primary need. However, the operational safety of these systems can be easily affected if abnormal flight conditions are present, thereby compromising the nominal bounds of design of the system's flight envelop and trajectory following. This thesis focuses on …

Certification Basis For A Fully Autonomous Uncrewed Passenger Carrying Urban Air Mobility Aircraft, Steve Price

Student Works

The Urban Air Mobility campaign has set a goal to efficiently transport passengers and cargo in urban areas of operation with autonomous aircraft. This concept of operations will require aircraft to utilize technology that currently does not have clear regulatory requirements. This report contains a comprehensive analysis and creation of a certification basis for a fully autonomous uncrewed passenger carrying rotorcraft for use in Urban Air Mobility certified under Title 14 Code of Federal Regulations Part 27. Part 27 was first analyzed to determine the applicability of current regulations. The fully electric propulsion system and fully autonomous flight control system …

Metal Organic Framework Modifications Of Structural Fibers, Marwan Al-Haik

Publications

A reinforced carbon composite can include a carbon sub­strate and a metal organic framework bonded to the carbon substrate. For example, a reinforced carbon composite can include a first layer, a second layer, and a resin adhered to the first layer and the second layer. The first layer can include a carbon substrate and a metal organic framework bonded to the carbon substrate. The second layer can include a carbon substrate and a metal organic framework bonded to the carbon substrate.

Spacecraft Systems & Navigation, Christopher Vanacore

Student Works

This textbook is steered towards higher educational course entailed in Commercial Space Operations. This textbook will be covering in detail Orbital Satellites, and Spacecraft. These topics are discussed according to their application, design, and environment. The power system, shielding and communication systems are reviewed along with their missions, space, environment and limitations. Any vehicle, whether manned or unmanned, intended for space travel is a spacecraft. A spacecraft's required systems and equipment depend on the information it will acquire and the tasks it will perform. Although their levels of sophistication vary widely, they re all subject to the harsh conditions of …

Ramping Up For Cost And Performance Improvements, Arthur Zucchetti Lechmann, Guilherme Henrique Lima, João Paulo Lucchi, Paulo Henrique Azevedo Santana, Pedro Kamikihara

Student Works

The objective of this Research Project was to study the possible benefits of developing an improved Metering Control System. This study identified potential cost savings and reduced emissions through the greater use of a Metering Control System. The results of this research have indicated an annual cost reduction of $720,000 in fuel burn and a significant delay time reduction caused by accumulated ground traffic. In addition, during peak hours, it was concluded that savings could be potentially higher. Therefore, by optimizing the ground movement, it is also expected a lower level of CO2 emissions, an increased safety level due to …

Understanding Unsteady Corner Separation Within Wing-Body Junction Flows, Paul G. Winner

Doctoral Dissertations and Master's Theses

Wing-body junction flows, formed at the interface between a wing and fuselage surface, are a complex, coupled, three-dimensional, turbulent flow field. This thesis focused on the unsteady corner separation that develops at the trailing edge of this wing-body junction under certain conditions. A NACA 0015 wing mounted on a flat plate at an angle of attack of 13°was used as the model junction flow field. The wing had an aspect ratio of 8 with a linear washout twist of 15°. The Reynolds number based on the wing chord was Re_c = 4.5 × 10⁵. Time-dependent stereoscopic particle …

Assessment Of Iso-Ahola’S Theory Of Tourism Motivation On Willingness To Fly As A Point-To-Point Suborbital Space Tourist, Brian T. Musselman

Doctoral Dissertations and Master's Theses

Suborbital space tourism involves flight in an air vehicle to an altitude exceeding 100 kilometers (62 miles). This altitude is referred to as the Karman Line and the edge of space. Point-to-point space travel is transportation in an air vehicle where the vehicle flies around the earth in space to decrease the time to travel from one point on the earth’s surface to another point on the earth’s surface. The commercial space flight industry has a vision for point-to-point space travel.

The study aimed to assess the influence of the four dimensions of Iso-Ahola’s (1982) theory of tourism motivation on …

Effect Of Spray Rails On Takeoff Performance Of Amphibian Aircraft, Soham Bahulekar

Doctoral Dissertations and Master's Theses

Amphibian aircraft have seen a rise in popularity in the recreational and utility sectors due to their ability to take off and land on both land and water, thus serving a myriad of purposes such as aerobatics, surveillance, and firefighting. The design of such seaplanes requires to be both aerodynamically and hydrodynamically efficient, especially during the takeoff phase. In the past, naval architects have implemented ways to make boats, yachts, and large ships more efficient; one of them being the addition of chine strips and spray rails on the hull. This thesis study explores the possibility of implementing spray rails …

Quasi-Static Structural Analysis Of An Experimental Aircraft Wing, Scott Bender

Doctoral Dissertations and Master's Theses

In this report, a quasi-static load analysis is conducted on an experimental light sport aircraft wing via a whiffletree bending test. This report will discuss the loads present on the aircraft during straight level flight at a speed of 82 knots equivalent air speed. Flight load calculations are described along with the design of the whiffletree and mounting structures utilized for applying the distributed point loads. Initial finite element analysis is performed on the wing structure to determine critical strain locations and optimal sensor distribution. Subsequent mechanical experimentations are performed using a bending test to measure the strain at critical …

A Patient Risk Minimization Model For Post-Disaster Medical Delivery Using Unmanned Aircraft Systems, Mark J. Simpson

Doctoral Dissertations and Master's Theses

The purpose of this research was to develop a novel routing model for delivery of medical supplies using unmanned aircraft systems, improving existing vehicle routing models by using patient risk as the primary minimization variable.

The vehicle routing problem is a subset of operational research that utilizes mathematical models to identify the most efficient route between sets of points. Routing studies using unmanned aircraft systems frequently minimize time, distance, or cost as the primary objective and are powerful decision-making tools for routine delivery operations. However, the fields of emergency triage and disaster response are focused on identifying patient injury severity …

Behavioral Intention Factors For Prescription Deliveries By Small Unmanned Aircraft In Rural Communities, Sarah M. Talley

Doctoral Dissertations and Master's Theses

Nearly half of the U.S. population regularly use and depend on prescription medications; however, pharmacy availability and access to pharmacy services are often lacking, particularly in rural communities. In an effort to meet local healthcare needs, delivery by sUAS is proposed to ensure the nearly 60 million rural residents have access to their prescription medications.

As an emerging technology with little research into home delivery applications, the successful implementation of sUAS for prescription medication delivery requires public acceptance and positive behavioral intention toward its use. At the time of the current research, no prior studies have specifically focused on the …

Vertically Air Lifted High Altitude Light Launch Apparatus (Valhalla), Benjamin E. Chaback, Ethan L. Deweese, Avery Evans, Alyssa Hodum

Beyond: Undergraduate Research Journal

Project VALHALLA aims to get collegiate level rockets to reach higher altitudes by providing a launch platform that shall allow them to be launched from 100,000 ft. This shall allow researchers to pass ninety percent of Earth's dense atmosphere when launching their rockets and shall allow for research at altitude. VALHALLA’s design consists of using multiple high-altitude balloons arranged around a launch platform to reach the target altitude with the rocket. The project shall consist of the following subsystems: policy, structure and design, helium recovery system, and electronics. The policy team shall be responsible for ensuring that this platform conforms …

Electromagnetic Slosh And Liquid Position Detection, Eduardo Antonio Rojas

Publications

Apparatus and techniques are described for monitoring slosh of a liquid within a propellant tank. The approaches described herein can use an electromagnetic transmitter positioned at a first location on or within the tank, the electromagnetic transmitter coupled to a source of electro­magnetic energy and arranged to establish a specified elec­tromagnetic field configuration within the tank using a signal from the source, and an electromagnetic receiver positioned at a different second location on or within the tank, the electromagnetic receiver arranged to sense an electromag­netic field established within the tank by the electromagnetic transmitter. A control circuit can be coupled …

Drone Cage Design And Implementation To Enable Small Drone Architecture Testing, Marco Fagetti, Emily M. Suh

Undergraduate Student Works

Geometric mechanics is a dynamical formalism that allows for simultaneous treatment of rotational and translational motion without the drawbacks of attitude parameterization sets. While geometric mechanics is well suited to deal with full six degree-of-freedom motion or significant position-attitude coupling, this formalism has yet to be extensively applied to hardware systems. The broader research goals of this work aim to prove the practical viability of this theoretical framework by applying it to a class of Crazyflie drones, which are frequently used to assess Guidance, Navigation, and Control schemes. To efficiently achieve these goals, a reliable, collapsible drone cage is required …

Space Cargo: Ultra-Fast Delivery On Earth –Potential Of Using Suborbital Space Vehicles For The Transportation Of Cargo, Robert O. Walton, Robert A. Goehlich

International Journal of Aviation, Aeronautics, and Aerospace

No abstract provided.

Conceptual Design Of Fuel Dumping System In Aircraft, Naveen M. Kumar Mr., Ravi A. Kannan Be., Magesh L Be., Praveen T. Kumar Be., Vijay K. Babu Me., Prashanth Radhakrishnan Be.

International Journal of Aviation, Aeronautics, and Aerospace

Airlines release the unburned jet fuel into the atmosphere to reduce the weight of aircraft before landing. Sometimes, aircraft reach a weight more than takeoff weight while departing from the airport. Therefore, the pilot follows the ATC comment to dump fuel into the atmosphere to reduce the aircraft's weight to avoid accidents. Due to fuel dumping, an airline faces fuel consumption, loss, and several diseases affect environmental pollutants, and living things. The total fuel consumption of commercial airlines worldwide in 2021 is 57 billion gallons. If jet fuel routinely hit the ground, it would pollute water and land and damage …

Uas For Public Safety: Active Threat Recognition, Joseph Cerreta, Tray Denney, Scott S. Burgess, Anthony Galante, David Thirtyacre, Gloria A. Wilson, Patrick Sherman

International Journal of Aviation, Aeronautics, and Aerospace

The Center for Homeland Defense and Security identified an increase of active threat events, such as mass shootings, annually since 1999. Literature suggests that 90% of shootings were over before law enforcement arrived at the scene and the first responder response was limited to “surround and contain” until Special Weapons and Tactics Teams (SWAT) arrived on the scene. Using Unmanned Aircraft Systems (UAS) to detect which individual was the threat and type of weapon used can provide useful information to increase the speed of the response for first-on-scene rather than waiting for SWAT if the type of weapon was known. …