Engineering Commons^™

Dynamic Analysis Of Less-Than-Truckload Shipments And Test Method To Simulate This Environment, Sher Paul Singh, E. Joneson, Jay Singh, G. Grewal

Industrial Technology and Packaging

This paper provides results from a comprehensive data measurement study that analyzed the vibration dynamics produced inside the trailers used for less-than truckload (LTL) shipments. The trailers used for this segment of the package transportation environment are very different in size and suspension than those used for full truckload shipments. This study measured the vertical, lateral and longitudinal vibration inside a trailer as a function of road surface. In addition, the study developed a video showing freight movement inside the trailer to determine physical displacement and shifting of the loads. A set of recommendations was developed to safely load and …

An Engineering Evaluation Of Ankle Prosthetics, Christopher Thian, Stephen Tiernan, Fiona Mcevoy, Robert Flavin

Conference Papers

There are a wide range of different types of ankle replacements on the market today each with a
different mechanical design. Unfortunately the results of ankle replacements are not as good as hip
and knee replacements; this is due to the complexity of the ankle joint. In the early days of ankle
replacements some of the prosthetics only lasted 4 months. Recent developments have improved the
longevity of the replacements although, there are still many complications and failures of the
replacements, these include; the prosthetic components migrating into the bone, the components
failing due to stresses induced by the forces …

Modeling Systems For Optimal Resource Allocation, Scheduling, And Decision Making, Esengul Tayfur

All Dissertations

This dissertation focuses on the resource requirements and scheduling problem for logistic systems. We investigate solutions to this problem in two different logistic systems: logistic system of the health care facilities during emergency evacuations and delivery and distribution system of production industries. All hospitals must have an evacuation plan to ensure the safety of patients and prevent the loss of life. However, hospital operators have not been able to quantify how resource availability, the cost of acquiring those resources, and evacuation completion time are related. This research addresses this problem and contributes two methodologies to solve this problem. In the …

A Real-Time Traffic Condition Assessment And Prediction Framework Using Vehicle-Infrastructure Integration (Vii) With Computational Intelligence, Yongchang Ma

All Dissertations

This research developed a real-time traffic condition assessment and prediction framework using Vehicle-Infrastructure Integration (VII) with computational intelligence to improve the existing traffic surveillance system. Due to the prohibited expenses and complexity involved for the field experiment of such a system, this study adopted state-of-the-art simulation tools as an efficient alternative.
This work developed an integrated traffic and communication simulation platform to facilitate the design and evaluation of a wide range of online traffic surveillance and management system in both traffic and communication domain. Using the integrated simulator, the author evaluated the performance of different combination of communication medium and …

An Open Framework For Highly Concurrent Real-Time Hardware-In-The-Loop Simulation, Ryan C. Underwood, Bruce M. Mcmillin, Mariesa Crow

Computer Science Faculty Research & Creative Works

Hardware-in-the-loop (HIL) real-time simulation is becoming a significant tool in prototyping complex, highly available systems. The HIL approach permits testing of hardware prototypes of components that would be extremely costly or difficult to test in the deployed environment. In power system simulation, key issues are the ability to wrap the systems of equations (such as Partial Differential Equations) describing the deployed environment into real-time software models, provide low synchronization overhead between the hardware and software, and reduce reliance on proprietary platforms. This paper introduces an open source HIL simulation framework that can be ported to any standard Unix-like system on …

Using Agile Software Development Practices In A Research Oriented Distributed Simulation, Douglas James Mielke

Computational Modeling & Simulation Engineering Theses & Dissertations

Although sometimes controversial, agile methodologies have proven to be a viable choice for some software development projects. Projects suited to agile methodologies are those that involve new technology, have requirements that change rapidly, and are controlled by small, talented teams. Much literature about agile software development leans towards business products and non-government entities. Only a handful of literature resources mention agile software development being used in government contracts and even fewer resources mention research projects. NASA's Airspace and Traffic Operations Simulation (ATOS) is a research oriented simulation that doesn't follow the traditional business project mold. In an effort to gain …

Equivalent Barge And Flotilla Impact Forces On Bridge Piers, Peng Yuan, Issam E. Harik

Kentucky Transportation Center Research Report

Bridge piers located in navigable inland waterways are designed to resist impact forces from barges and flotillas in addition to other design considerations (e.g., scour, dead and live loads, etc.). The primary design tool for estimating these forces is the AASHTO Guide Specification which provides a simple hand calculation method for determining an “equivalent impact force”. The simplicity comes at a cost of excluding the effect of the pier shape, impact duration, and interaction between barges in a flotilla. The objective of this report is to present a hand calculation method for determining barge or flotilla equivalent static impact forces …

Multi-Barge Flotilla Impact Forces On Bridges, Peng Yuan, Issam E. Harik, Michael T. Davidson

Kentucky Transportation Center Research Report

The current AASHTO equations for barge impact loads are based on scale models of barges, and may not accurately predict impact loads on bridge piers. The results of this study produce more realistic flotilla impact design loads, potentially leading to a reduction in construction costs of bridges over navigable waterways. The objectives of this study are: (1) To conduct theoretical finite element analysis on various types of flotillas impacting bridge piers. The flotillas and the respective barges will be of the type commonly traversing Kentucky’s waterways; and (2) To generate design equations for barge/flotilla impact loads. The study concludes the …

Performance Study Of Mpls And Ds Techniques To Improve Qos Routing For Critical Applications On Ip Networks, Salim Alsharif, Mohammad Mehdi Shahsavari

Electrical Engineering and Computer Science Faculty Publications

This paper aims to analyze the QoS performance of two main technology mechanisms, Multi-Protocol Label Switching (MPLS) and Differentiated Services (DS). The introduction of both mechanisms to support throughput and delay sensitive real-time media traffic will have an impact on critical applications with respect to QoS and traffic engineering. MPLS is a traffic forwarding mechanism that allows traffic to use multiple paths and DS is a mechanism that provides for aggregate traffic to be classified and conditioned at the edge of the network routers. The two modeled techniques and their performance will be evaluated with respect to their end-to-end delay. …

Modeling The Effects Of Value-Added Processing And Logistics Using Arena, Kurt A. Rosentrater, Elif Kongar

Kurt A. Rosentrater

Scarcity and cost of nonrenewable fossil fuels have been a growing focus of many energy-dependent nations, including the U.S., for the past couple of decades. There are mainly two ways to approach these problems: (1) reducing the energy dependency and/or (2) developing alternative means of energy production. Utilizing biofuels, which are renewable sources of energy, is a promising way to produce energy. But, as this industry grows, so too does the quantity of byproducts, which are known as DDGS. This paper discusses a model that has been developed to analyze the economic viability of DDGS processing, and includes both deterministic …

In Vivo Ultrasonic Attenuation Slope Estimates For Detecting Cervical Ripening In Rats: Preliminary Results, Timothy A. Bigelow, Barbara L. Mcfarlin, William D. O'Brien Jr., Michael L. Oelze

Timothy A. Bigelow

To effectively postpone preterm birth, cervical ripening needs to be detected and delayed. As the cervix ripens, the spacing between the collagen fibers increases and fills with water, hyaluronan, decorin, and enzymes suggesting that the ultrasonic attenuation of the cervix should decrease. The decrease in ultrasonic attenuation may be detectable, leading to an effective means of detecting cervical ripening. Herein, the traditional attenuation slope-estimation algorithm based on measuring the downshift in center frequency of the ultrasonic backscattered signal with propagation depth was modified and applied to the cervix of rats. The modified algorithm was verified using computer simulations and an …

Molecular Dynamics Simulation Of Crack Propagation On Different Slip Planes Of Bcc Iron, Y. Gao, C. Lu, A. K. Tieu, H. T. Zhu

Faculty of Engineering - Papers (Archive)

In this paper, molecular dynamic simulations of crack propagation in body centre cubic (bcc) single crystal have been performed. The crack propagation behaviors on two different slip planes ({1 1 0} and {2 1 1}) have been investigated. A self-adaptive time step algorithm has been proposed to increase the stability of the simulations. It has been found that the slip plane significantly affects the propagation speed of the crack.

Validated Computer Simulation Modelling For Complete Conveyor Transfer Design, David B. Hastie, Andrew P. Grima, Peter W. Wypych

Faculty of Engineering - Papers (Archive)

This paper presents the chute flow analysis for a granular cohesionless material in a hood and spoon style transfer chute and bench scale testing methods to calculate the coefficient of restitution, particle rotation restraint and the coefficient of friction between particles of granular material. The experimental chute flow investigations were performed on a conveyor transfer research facility located at the University of Wollongong, using high-speed video to capture the granular flow and subsequently analysed with the Image Pro Plus software package. The bench scale tests were analysed to determine the input parameters for the DEM simulations of the trajectories and …

Simulation Of The Reinforced Concrete Slabs Under Impact Loading, Faham Tahmasebinia, Alexander Remennikov

Faculty of Engineering - Papers (Archive)

Many older structures were designed for static loads but more recently there has been a growing awareness that some must be designed to resist both dynamic impact and static loads. An accidental impact load can be caused by mishaps in industry as well as accidents stemming from transportation or man-made disasters. There are number of ways of predicting how an impact load will affect a concrete slab, some of which may be impractical or expensive but because there have been significant developments in technology, numerical techniques rather than experimental approaches have become popular methods for developing detailed responses Therefore, to …

Finite Element Simulation Of Mandrel Penetration In A Normally Consolidated Soil, Cholachat Rujikiatkamjorn, Ali Ghandeharioon, Buddhima Indraratna

Faculty of Engineering - Papers (Archive)

In this paper, a finite element simulation of the mandrel penetration in normally consolidated soils is presented using a commercial finite element code (ABAQUS). A coupled analysis with large-strain frictional contact is used to simulate the soil-mandrel interface during mandrel penetration. The modified Cam clay model is used to represent the soft soil. The numerical predictions are then compared with the results obtained from the large scale laboratory tests to predict the extent of the smear zone. A large scale consolidation test was conducted with the rate-controlled device used to install the mandrel. The associated excess pore pressures at various …

Simulation Of A Circulating Fluidised Bed Biomass Gasifier Using Aspen Plus: A Performance Analysis, Wayne Doherty, Anthony Reynolds, David Kennedy

Conference Papers

In the near future biomass gasification is likely to play an important role in energy production and conversion. Its application has great potential in the context of climate change mitigation, increasing efficiency and energy security. Atmospheric circulating fluidised bed (CFB) technology was selected for the current study. An original computer simulation model of a CFB biomass gasifier was developed using ASPEN Plus (Advanced System for Process ENgineering Plus). It is based on Gibbs free energy minimisation and the restricted equilibrium method was used to calibrate it against experimental data. This was achieved by specifying the temperature approach for the gasification …

Implementation Of Simulation For Network Service Delivery Point Capacity Analysis, Tiffany Jill Harper

Browse all Theses and Dissertations

As businesses consolidate and modernize their operations, the impact on their network and computing infrastructure is a major consideration. In this thesis, discrete event simulation is used to show how implementation of an Enterprise Resource Planning (ERP) system can impact network performance and ultimately affect end-users. More specifically, the model simulates the flow of data packets across a network, through a Service Delivery Point (SDP), which is comprised of routers, switches, and firewalls that connect a Local Area Network to a Wide Area Network.

The model was used to run to determine the affect of more network traffic and additional …