Engineering Commons^™

Safety Investigation Of Crash Rates During Hurricane Evacuations, Amelia K. Lawson

Doctoral Dissertations and Master's Theses

This study aimed to investigate crash rates across four distinct periods—evacuation, re-entry, emergency, and non-emergency—during Hurricanes Matthew (2016), Irma (2017), and Michael (2018). A notable gap in existing research pertains to understanding crash rates during these critical phases of hurricane events. By addressing this gap, this research contributes to a deeper comprehension of evacuation transportation safety. The methodology employed ArcMap to construct an interactive map for data collection, encompassing key variables such as the number of crashes, traffic volumes, duration of each period under analysis, and roadway segment lengths for each hurricane. Evaluating the crash rate per million vehicular miles …

Integration Of Advanced Qualification Program Into Aviation Education, Jorge L. D. Albelo, Victor Fraticelli Rivera, Robert L. Thomas

Journal of Aviation Technology and Engineering

The Federal Aviation Administration places aviation safety as a top priority, continuously striving to improve safety standards within the National Airspace System. In 2004, the Federal Aviation Administration introduced the Advanced Qualification Program (AQP) as an alternative methodology for pilot training and evaluation. This study explores the impact of AQP-centered aviation education on student performance, particularly in the context of learning advanced jet transport systems. The AQP model, based on aligning training with operational aviation requirements, emphasizes cognitive skill training and evaluation. Theoretical foundations underpinning this study include Karp’s integrated aviation learning model, which seamlessly integrates various instructional approaches, fostering …

Development And Evaluation Of Blind Spot Detection Safety System Based On 2d-Lidar Technology As An Optimization For Adas Systems, Timothy J. Sutton

Honors College Theses

Distracted driving poses a significant safety hazard and will only exacerbate as the number of modern-day distractions increases. To mitigate this problem, Advanced Driver Assistance Systems (ADAS) features, such as blind spot detection, have been pivotal for the safer operation of vehicles. Towards the same objective, the goal of this research is to utilize 2D LiDAR sensors to create a blind spot detection system that will detect objects and surfaces that are outside of the driver’s field of view. A comparative analysis was conducted by developing a 2D LiDAR-based system utilizing NVIDIA Jetson Orion Nano and Python alongside an ultrasonic-based …

Comparative Analysis Of Aviation And Ground Transportation Safety Standards Applicable To The Integration Of Unmanned Aircraft Operations, Andrew Walker

International Journal of Aviation, Aeronautics, and Aerospace

This study performed a comparative analysis of SMS in both the aviation and ground transportation industries to identify any gaps that may impact aviation safety by incorporating UAS operations within the ground transportation industry. The study reviewed relevant literature and compared the FAA SMS and FMCSA SMC policy components. The study also compared the implementation of OSHA requirements within the aviation and ground transportation industries. After reviewing the relevant policy components, the study finds that differences in safety standards between the FAA SMA and FMCSA SMC would impact safety. The study recommends that the SMC incorporate process descriptions for SRM …

Assessing Past Airworthiness Directives And How Safety Management Systems May Benefit Aviation Product Design And Manufacturing, Damon Lercel Ph.D., Manoj Patankar Ph.D., Richard Steckel Ph.D.

Journal of Aviation/Aerospace Education & Research

The European Union Aviation Safety Agency (EASA) continues to promulgate Safety Management Systems (SMS) across aviation organizations when it recently issued SMS requirements for EASA certificated Part 145 maintenance, repair and overhaul (MRO) organizations and Part 21 Design & Manufacturing (D&M) organizations. Currently, the Federal Aviation Administration (FAA) has no such rule in place for these U.S.-based organizations, which may challenge those doing business in countries where EASA policies apply. Given that a majority of the United States’ D&M and MRO population is made up of smaller organizations, it is likely a U.S. SMS regulation will require justification of the …

Policy Brief: Evaluation Of The Safety Of Pedestrian Crossing Treatments In Small And Rural Communities, Parsa Pezeshknejad, Dana Rowangould, James Sullivan

University of Vermont Transportation Research Center

TRC Policy Brief: Rural areas often lack adequate pedestrian infrastructure, resulting in elevated safety risks for pedestrians. The combination of higher speed limits and reduced driver awareness amplifies the potential for pedestrian collisions when crossing the roadway.

This study addresses uncertainty about the effectiveness of rectangular rapid flashing beacons (RRFBs) and LED-embedded signs (LESs) as potential safety interventions. RRFBs and LESs are both pedestrian crossing treatments that allow pedestrians to activate lights to alert drivers of their intent to cross. RRFBs include horizontal LED lights mounted to the sign pole, while LESs include LEDs embedded in the edge of the …

The Characterization, Assessment, And Shear Strength Of Turfgrass Soil In North American Thoroughbred Racing, Peter Schmitt

Theses and Dissertations--Biosystems and Agricultural Engineering

Minimizing catastrophic injuries to racehorses, which also protects the riders, is critical for the future of the Thoroughbred racing industry. While the causes of catastrophic injuries are multifactorial, the condition of the racing surface is one of only a few factors that affects all horses in competition. Horse racing surfaces must retain enough shear strength to support the hoof of a Thoroughbred at a gallop. Turfgrass racing surfaces also require healthy turf to reinforce the footing while also achieving a high infiltration rate to allow races to run on the turf soon after or even during rain. This research is …

Current States , Prediction And Prevention Suggestions For Water Hazard Accidents In China’S Coal Mines, Sun Wenjie, Li Wenjie, Ning Dianyan, Ren Lingfeng

Coal Geology & Exploration

At present, the pattern of coal resource development in China has changed, but the water hazard accidents that restrict the safety production of coal mine still occur from time to time. In order to explore the characteristics and laws of water hazard accidents in coal mines in China and scientifically study and judge the evolution trend of water hazard accidents, study was performed in terms of the year, region, accident level and influencing factors of water hazard accidents, with the nationwide water hazard accidents from 2001 to 2022 as the statistical objects. Meanwhile, the Long Short-Term Memory (LSTM) model was …

Dam Failure And Incident Investigations, Nathaniel Gee

Theses and Dissertations

There are multiple dam failures and dam safety incidents every year in the United States. There are currently no standard policy requirements for when or how to conduct failure or incident investigations. This paper first reviews one of the most significant failures in US history, the failure of Buffalo Creek Dam No. 3 in order to explore the impacts of one significant failure on dam safety policy in the US. The paper then explores the currents state of the industry by reviewing 58 different dam failure or incident investigation reports based on incidents that occurred in the United States from …

Assessing The Effectiveness Of Nuclear Security Training And Education In Ghana, Michael Nii Sanka Ansah, Boris Stepanov Pavlovich, Paul Atta Amoah, David Okoh Kpeglo, Simon Adu, Bright Kwame Afornu

International Journal of Nuclear Security

Growing attention is being given to nuclear power across several African countries, including in Ghana. The world is depending on nuclear energy as a reliable and efficient means of energy generation. Ghana as a country is developing nuclear energy; thus, equal attention must be directed toward nuclear safety and security. Ghana is gradually developing interest in and is devoting substantial required resources to educating and training on nuclear security to meet the standards required by international bodies. Institutions such as the Nuclear Safety and Security Centre and the School of Nuclear and Allied Sciences of the Ghana Atomic Energy Commission …

Digital Challenges And Opportunities Of Addressing On-Site Productivity And Safety On Construction Job Sites: An International Perspective, Ahmed Hassan, Ankur Mitra, Mark Mulville, Alan Hore

Conference papers

The slow pace of digital transformation in construction remains an impediment to the industry’s evolution. Despite rapid developments in digital technologies, the vast bulk of data generated on construction job sites remains underutilised due to the limited use of real-time data capture. The diffusion of digital solutions in construction depends on successfully capturing critical real-time data that can inform and contribute to more productive work patterns and safer job sites. Nevertheless, the construction industry’s fragmented nature has segregated the digital solutions offered by technology providers from the volatile challenges facing on-site construction practitioners.

This paper will present the early development …

Investigating Disparities And Safety Equity In Pedestrian Nighttime Crashes In Michigan, Sia Isaria Mwende

Masters Theses

For the past eleven years (2011 - 2021) in Michigan, 76 percent of all fatal pedestrian crashes occurred at night. Over the same period, about 36 percent of pedestrian nighttime crashes were fatal or incapacitating (KA), while only 25 percent of daytime pedestrian crashes were fatal or incapacitating (KA). Previous studies suggest that, overall, poor neighborhoods and racial minorities are associated with more pedestrian crashes. With more fatal and incapacitating pedestrian crashes occurring at night, it is imperative to examine how these crashes are distributed by economic status and racial makeup. Therefore, this study aims to investigate the racial and …

Safety First Means Safety Fits- An Awareness Campaign For Inclusive Ppe Designed For Women, Reagan Kellen Tonda

Construction Management

The construction industry has long overlooked the unique needs of women in terms of personal protective equipment (PPE), leading to discomfort and safety risks. This paper presents the "Safety First Means Safety Fits" social media awareness campaign, which aims to increase awareness about the importance of size-inclusive PPE for women and the progress being made in the industry. The campaign utilized social media, specifically Instagram, as a platform for dialogue and information distribution. The campaign involved the creation of an Instagram account (@safetyfits_CP) and the development of six posts addressing various aspects of women's PPE. The posts were promoted through …

Development Of Underground Utility Construction Course Curricula For The Granite Heavy Civil Minor, Jared T. Schlenker

Construction Management

This paper discusses the introduction of a new course into the Granite Heavy Civil Minor (GHCM) curriculum. This course revolves around underground utility construction and is designed to provide students with knowledge that neither the Construction Management nor Civil Engineering Departments provide. The additional curricula are comprised of underground construction safety, materials, and construction methods that will provide GHCM students with a competitive advantage when applying for jobs in heavy civil construction, further incentivizing the minor program. This senior project utilizes PowerPoint presentations that can either comprise an entire course or be added to existing courses as supplemental information

Inventory, Operations, And Safety At Free Right-Turn Ramps, Aemal Khattak, Jonathon Camezind, Mm Shakui Haque

Nebraska Department of Transportation: Research Reports

This research focused on traffic safety and operational performance of rural, minor approach stop-controlled intersections with free right-turn (FRT) ramps. The objectives of the research were to:

• Create a statewide inventory of rural FRT ramp intersections and provide to the Nebraska Department of Transportation (NDOT),
• Using NDOT 10-year crash data, conduct statistical safety analysis of rural FRT intersections extending ¼-mile in each direction from the intersection,
• Study vehicular operations at rural intersections with and without FRT ramps including a comparison of vehicular conflicts, and
• Develop guidelines for operations and safety tradeoffs to assist with NDOT projects on maintaining similar locations, …

Personal Protective Equipment Usage And Injury Type, Nathan Giannini

Construction Management

Workers in the construction industry have many injuries both minor and life-altering. The industry suffers from injuries of all kinds such as falls, electrocution, and being struck by flying objects. To protect against this, workers wear certain types of personal protective equipment (PPE) on construction sites as a last line of defense. The equipment available such as hard hats, safety glasses, gloves, respirators, and hearing protection either protects against acute injuries (those that occur instantly) or chronic injuries (those that occur over time). This study investigates whether the type of injury that PPE protects against, acute or chronic, affects the …

The Impact Of Albuquerque’S Bus Rapid Transit System On Pedestrian Safety, Martina Mercure

Civil Engineering ETDs

This project will explore the impacts of several traffic safety countermeasures and roadway design changes on pedestrian safety along the Central Avenue corridor of Albuquerque, New Mexico. The motivation behind this research is the communities concern for the increase in pedestrian fatalities in the US and specifically New Mexico. The research will have a specific focus on pedestrian safety, but we will also address traffic safety outcomes for motor vehicle users and bicyclists. The City of Albuquerque has taken note of the traffic safety issues on Central Avenue and has implemented or is in the process of implementing several countermeasures …

Enhancing Pedestrian-Autonomous Vehicle Safety In Low Visibility Scenarios: A Comprehensive Simulation Method, Zizheng Yan, Yang Liu, Hong Yang

Modeling, Simulation and Visualization Student Capstone Conference

Self-driving cars raise safety concerns, particularly regarding pedestrian interactions. Current research lacks a systematic understanding of these interactions in diverse scenarios. Autonomous Vehicle (AV) performance can vary due to perception accuracy, algorithm reliability, and environmental dynamics. This study examines AV-pedestrian safety issues, focusing on low visibility conditions, using a co-simulation framework combining virtual reality and an autonomous driving simulator. 40 experiments were conducted, extracting surrogate safety measures (SSMs) from AV and pedestrian trajectories. The results indicate that low visibility can impair AV performance, increasing conflict risks for pedestrians. AV algorithms may require further enhancements and validations for consistent safety performance …

Small Unmanned Aircraft Systems: Operator Workload And Situation Awareness Utilizing First Person View Techniques, Ross Lucas Stephenson Jr

Doctoral Dissertations and Master's Theses

The small, unmanned aircraft systems (sUAS) sector within the aviation industry is experiencing unprecedented growth. However, the regulatory guidance for the safe integration of sUAS into the National Airspace System (NAS) has not kept pace with this technological growth within the market. Current regulatory limitations of line-of-sight operations may have an impact on the establishment of an equivalent level of safety for sUAS operations as maintained by manned aircraft. The focal point of the discussion of line-of-sight operations has been the ability of the sUAS pilot to see and avoid all obstacles and other aircraft in a safe and timely …

Neural Network Fusion Of Multi-Modal Sensor Data For Autonomous Surface Vessels, David J. Thompson

Doctoral Dissertations and Master's Theses

Autonomous surface vessels (ASV) can potentially improve the safety of vessels traditionally operated by humans. Despite advancements in autonomous on-road vehicles, many of these advancements have yet to be realized for ASVs. This is primarily due to lacking ASV sensing platforms and public datasets for ASV-based perception research. To that end, this dissertation demonstrates the design of a synchronized multi-modal sensing platform for ASVs utilizing GPS/INS, LiDAR, LWIR cameras, HDR camera, and high-resolution cameras. The sensing platform is designed to maximize the overlap of sensors for multi-modal research and provides accurate intrinsic and extrinsic calibration between each sensor. Furthermore, the …

The Perceptions And Effects Of Nutrition On Worker Health And Productivity In Construction, Matthew Scott Howell

Construction Management

Construction workers often have poor dietary habits due to poor nutrition education, lack of nutritious food options, and social stigma. These habits often lead to health problems like obesity, diabetes, and heart disease which can decrease productivity and put workers at risk of on-site injury. This preliminary study examines how nutrition impacts worker safety and productivity. A survey was distributed to six students involved in construction work for Cal Poly’s Residential Construction course. This survey identified their eating habits and inhibitors for healthy eating. Two meals, one with high nutritional value and one with low nutritional value, were given to …

Proposal For And Validation Of Novel Risk-Based Process To Reduce The Risk Of Construction Site Fatalities (Major Accident Prevention (Map) Program), Roberta Selleck, Marcus Cattani, Maureen Hassall

Research outputs 2022 to 2026

Despite developments in the prevention of fatalities in the construction industry, fatalities resulting from well-known hazards continue at an unacceptable rate. Construction fatality prevention literature describes risk management techniques to provide ‘early warning’ of potential events. In dynamic construction project environments, these ‘early warnings’ are missed resulting in serious and fatal events. Critical Control Risk Management (CCRM) provides an alternative strategy to prevent fatal events in the construction industry. However, no research exists that explores the application of CCRM to actual construction projects. This study aims to design, develop, and validate a construction fatality prevention program using CCRM principles through …

Dsrc Versus Lte-V2x: Empirical Performance Analysis Of Direct Vehicular Communication Technologies, Ehsan Moradi-Pari, Danyang Tian, Mojtaba Bahramgiri, Samer Rajab, Sue Bai

Michigan Tech Publications

Vehicle-to-Vehicle (V2V) communication systems have an eminence potential to improve road safety and optimize traffic flow by broadcasting Basic Safety Messages (BSMs). Dedicated Short-Range Communication (DSRC) and LTE Vehicle-to-Everything (V2X) are two candidate technologies to enable V2V communication. DSRC relies on the IEEE 802.11p standard for its PHY and MAC layer while LTE-V2X is based on 3GPP’s Release 14 and operates in a distributed manner in the absence of cellular infrastructure. There has been considerable debate over the relative advantages and disadvantages of DSRC and LTE-V2X, aiming to answer the fundamental question of which technology is most effective in real-world …

Development Of A Safety Performance Decision-Making Tool For Flight Training Organizations, Marisa D. Aguiar Phd, Carolina L. Anderson Phd

National Training Aircraft Symposium (NTAS)

The purpose of the research was to create and validate a safety performance decision-making tool to transform a reactive safety model into a predictive, decision-making tool, specific to large, collegiate Title 14 of the Code of Federal Regulations (CFR) Part 141 flight training organizations, to increase safety and aid in operational decision-making. Using Monte Carlo simulation, the study conducted simulation runs based on true operational ranges to simulate the operating conditions possible within large, collegiate CFR Part 141 flight training organizations with varying levels of controllable resources in terms of personnel (Aviation Maintenance Technicians and Instructor Pilots) and expenditures (active …

Artificial Intelligence-Enabled Exploratory Cyber-Physical Safety Analyzer Framework For Civilian Urban Air Mobility, Md. Shirajum Munir, Sumit Howlader Dipro, Kamrul Hasan, Tariqul Islam, Sachin Shetty

VMASC Publications

Urban air mobility (UAM) has become a potential candidate for civilization for serving smart citizens, such as through delivery, surveillance, and air taxis. However, safety concerns have grown since commercial UAM uses a publicly available communication infrastructure that enhances the risk of jamming and spoofing attacks to steal or crash crafts in UAM. To protect commercial UAM from cyberattacks and theft, this work proposes an artificial intelligence (AI)-enabled exploratory cyber-physical safety analyzer framework. The proposed framework devises supervised learning-based AI schemes such as decision tree, random forests, logistic regression, K-nearest neighbors (KNN), and long short-term memory (LSTM) for predicting and …

Optimizing Human Performance To Enhance Safety: A Case Study In An Automotive Plant, Maria Chiara Leva, Michaela Demichela, Carlos Albarran Morillo, Franco Modaffari, Lorenzo Comberti

Articles

Human factors play a relevant role in the dynamic work environments of the manufacturing sector in terms of production efficiency, safety, and sustainable performance. This is particularly relevant in assembly lines where humans are widely employed alongside automated and robotic agents. In this situation, operators’ ability to adapt to different levels of task complexity and variability in each workstation has a strong impact on the safety, reliability, and efficiency of the overall production process. This paper presents an application of a theoretical and empirical method used to assess the matching of different workers to various workstations based on a quantified …

Continual Reinforcement Learning Formulation For Zero-Sum Game-Based Constrained Optimal Tracking, Behzad Farzanegan, Sarangapani Jagannathan

Electrical and Computer Engineering Faculty Research & Creative Works

This study provides a novel reinforcement learning-based optimal tracking control of partially uncertain nonlinear discrete-time (DT) systems with state constraints using zero-sum game (ZSG) formulation. To address optimal tracking, a novel augmented system consisting of tracking error and its integral value, along with an uncertain desired trajectory, is constructed. A barrier function (BF) with a tradeoff factor is incorporated into the cost function to keep the state trajectories to remain within a compact set and to balance safety with optimality. Next, by using the modified value functional, the ZSG formulation is introduced wherein an actor–critic neural network (NN) framework is …

Learning From Past In The Commercial Air Transport Industry: A Bibliometric Analysis And Systematic Literature Review In The Safety Management Framework, Alok Tyagi, Rajesh Tripathi Dr, Soufiane Bouarfa Dr

International Journal of Aviation, Aeronautics, and Aerospace

In the commercial air transport industry, numerous accidents have occurred because stakeholders have failed to learn lessons from the past. The reactive hazard identification (HI) methodology in the current regulatory safety management framework provides a fresh opportunity to negotiate the challenges of the air transportation sector's predicted growth and societal safety expectations. In the regulatory framework, ‘learning from the past’ is related to the reactive method of HI, and it is viewed as a data-driven decision-making process in this review. This literature review aims to investigate academic literature on ‘learning from the past’ in the aviation industry to comprehend an …

Analysis Of Possible Causes Of Industrial Injuries And Accidents At Coal Industry Enterprises, F U. Otabekov, M Z. Naimova

Technical science and innovation

In this article, the issues that a person may face unfortunate events due to a certain reason due to the influence of various dangerous and harmful factors in the course of his life activities are resolved. Depending on the type and degree of exposure or the cause of the accident, the type and degree of injury may also vary. In most cases, injuries and damages occur suddenly and can lead to unexpected and unexpected consequences. Let's imagine that an unfortunate event happened by chance. In this situation, many people lose their senses, start to panic, hurry, become overly nervous or …

Evaluating Impacts Of Shared E-Scooters From The Lens Of Sustainable Transportation, Nitesh Shah

Doctoral Dissertations

As the popularity of shared micromobility is increasing worldwide, city governments are struggling to regulate and manage these innovative travel technologies that have several benefits, including increasing accessibility, reducing emissions, and providing affordable travel options. This dissertation evaluates the impacts of shared micromobility from the perspective of sustainable transportation to provide recommendations to decision-makers, planners, and engineers for improving these emerging travel technologies.

The dissertation focuses on four core aspects of shared micromobility as follows: 1) Safety: I evaluated police crash reports of motor vehicle involving e-scooter and bicycle crashes using the most recent PBCAT crash typology to provide a …