Engineering Commons^™

Implementing Commercial Inverse Design Tools For Compact, Phase-Encoded, Plasmonic Digital Logic Devices, Michael Efseaff, Kyle Wynne, Krishna Narayan, Mark C. Harrison

Engineering Faculty Articles and Research

Numerical simulations have become an essential design tool in the field of photonics, especially for nanophotonics. In particular, 3D finite-difference-time-domain (FDTD) simulations are popular for their powerful design capabilities. Increasingly, researchers are developing or using inverse design tools to improve device footprints and performance. These tools often make use of 3D FDTD simulations and the adjoint optimization method. We implement a commercial inverse design tool with these features for several plasmonic devices that push the boundaries of the tool. We design a logic gate with complex design requirements as well as a y-splitter and waveguide crossing. With minimal code changes, …

Utilizing Inverse Design To Create Plasmonic Waveguide Devices, Michael Efseaff, Kyle Wynne, Mark C. Harrison

Engineering Faculty Articles and Research

In modern communications networks, data is transmitted over long distances using optical fibers. At nodes in the network, the data is converted to an electrical signal to be processed, and then converted back into an optical signal to be sent over fiber optics. This process results in higher power consumption and adds to transmission time. However, by processing the data optically, we can begin to alleviate these issues and surpass systems which rely on electronics. One promising approach for this is plasmonic devices. Plasmonic waveguide devices have smaller footprints than silicon photonics for more compact photonic integrated circuits, although they …

Nonlinear Strong Coupling By Second-Harmonic Generation Enhancement In Plasmonic Nanopatch Antennas, Bryson Krause, Dhananjay Mishra, Jiyang Chen, Christos Argyropoulos, Thang Hoang

Department of Electrical and Computer Engineering: Faculty Publications

Enhanced electromagnetic fields within plasmonic nanocavity mode volumes enable multiple significant effects that lead to applications in both the linear and nonlinear optical regimes. In this work, we demonstrate enhanced second harmonic generation from individual plasmonic nanopatch antennas which are formed by separating silver nanocubes from a smooth gold film using a sub-10 nm zinc oxide spacer layer. When the nanopatch antennas are excited at their fundamental plasmon frequency, a 10⁴-fold increase in the intensity of the second harmonic generation wave is observed. Moreover, by integrating quantum emitters that have an absorption energy at the fundamental frequency, a …

Low Loss Plasmon-Assisted Integrated Photonics, Dhruv Fomra

Theses and Dissertations

Photonic integrated circuits (PICs), semiconductor chips with both photonic and electronic elements, are seeing rapid development and have the potential to transform several industries, such as autonomous driving, computing, telecommunication and quantum networks. However, realization and wide adoption of PICs across the various fields faces a key challenge – soze disparity between electronic (~0.01 um) and photonic components (~100’s of um). Plasmonics, a technology which confines light to the interface of metals and dielectrics, has a potential to address challenges. In particular, it has been shown to led to smaller devices (~10 um or less), enabling higher density optical circuits …

Three Dimensional Photonics Structures: Design And Applications, Mansoor Sultan

Theses and Dissertations--Electrical and Computer Engineering

Photonics is an emerging technology for light control, emission, and detection. Photonic devices control photons the same way electronic circuits control electrons in active or passive mode depending on the energy requirement of the device. This dissertation will discuss the design, fabrication, testing of photonic structures with applications including imaging and renewable energy. First, we developed a novel lithography method for fluoropolymer resist based on variable pressure electron beam lithography (VP-EBL). VP-EBL proves to be an efficient method for patterning a widely used, but challenging to process, fluoropolymer, Teflon AF. However, rather than solely mitigating charging, the ambient gas is …

On-Chip Nanoscale Plasmonic Optical Modulators, Abdalrahman Mohamed Nader Abdelhamid

Theses and Dissertations

In this thesis work, techniques for downsizing Optical modulators to nanoscale for the purpose of utilization in on chip communication and sensing applications are explored. Nanoscale optical interconnects can solve the electronics speed limiting transmission lines, in addition to decrease the electronic chips heat dissipation. A major obstacle in the path of achieving this goal is to build optical modulators, which transforms data from the electrical form to the optical form, in a size comparable to the size of the electronics components, while also having low insertion loss, high extinction ratio and bandwidth. Also, lap-on-chip applications used for fast diagnostics, …

Gold-Semiconductor Photocatalysts For Water Treatment Under Visible And Ultraviolet Light, Daniel Willis

LSU Doctoral Dissertations

Water scarcity threatens the lives of millions of people worldwide. It is imperative to improve the energy efficiency and affordability of water treatment methods to avoid a looming water-energy crisis. To meet this challenge, I have pursued research on the use of sunlight—our most reliable and abundant source of energy—to drive water treatment through photocatalysis. I explored the literature and found gold-semiconductor materials to hold promise for harvesting sunlight and catalyzing the breakdown of waterborne contaminants. Initially, I designed a novel optical cavity with gold (Au) nanoparticles on a zinc oxide / titania (TiO₂) / aluminum film stack …

Implementing Inverse Design Tools For Plasmonic Digital Logic Devices, Krishna Narayan, Mark C. Harrison

Engineering Faculty Articles and Research

Despite the benefits that optics and photonics have brought to improving communications, there remains a lack of commercialized optical computing devices and systems, which reduces the benefits of using light as an information-carrying medium. We are developing architectures and designs of photonic logic gates for creating larger-scale functional photonic logic circuits. In contrast to other approaches, we are focusing on the development of logic devices which can be cascaded in arbitrary ways to allow for more complex photonic integrated circuit design. Additionally, optical computing often uses on-off keying, which fails to take advantage of denser encoding schemes often used to …

Plasmonic Waveguides To Enhance Quantum Electrodynamic Phenomena At The Nanoscale, Ying Li, Christos Argyropoulos

Department of Electrical and Computer Engineering: Faculty Publications

The emerging field of plasmonics can lead to enhanced light-matter interactions at extremely nanoscale regions. Plasmonic (metallic) devices promise to efficiently control both classical and quantum properties of light. Plasmonic waveguides are usually used to excite confined electromagnetic modes at the nanoscale that can strongly interact with matter. The analysis of these nanowaveguides exhibits similarities with their low frequency microwave counterparts. In this article, we review ways to study plasmonic nanostructures coupled to quantum optical emitters from a classical electromagnetic perspective. These quantum emitters are mainly used to generate single-photon quantum light that can be employed as a quantum bit …

Point-Of-Care Devices For Therapeutic, Medical And Environmental Applications, Alisha Prasad

LSU Doctoral Dissertations

Point-of-care testing (POCT) or Point-of-use (POU) devices or technologies are defined as testing aids that are capable for onsite use or testing. The key advantages of POCT are low sample volume, quick onsite diagnosis, high accuracy, and cost-effectiveness. POCT has the potential and the benefits to facilitate better health care management by rapid routine diagnosis and monitoring. To reach this goal, several researchers as well as the healthcare industry over a few years have conducted cutting edge research to bring science to technology by developing smart diagnostic devices capable of performing as per patient profiles and make personalized health care …

A Hybrid Achromatic Metalens, Fatih Balli, Mansoor A. Sultan, Sarah K. Lami, J. Todd Hastings

Electrical and Computer Engineering Faculty Publications

Metalenses, ultra-thin optical elements that focus light using subwavelength structures, have been the subject of a number of recent investigations. Compared to their refractive counterparts, metalenses offer reduced size and weight, and new functionality such as polarization control. However, metalenses that correct chromatic aberration also suffer from markedly reduced focusing efficiency. Here we introduce a Hybrid Achromatic Metalens (HAML) that overcomes this trade-off and offers improved focusing efficiency over a broad wavelength range from 1000-1800 nm. HAMLs can be designed by combining recursive ray-tracing and simulated phase libraries rather than computationally intensive global search algorithms. Moreover, HAMLs can be fabricated …

Plasmonic-Active Nanostructured Thin Films, Jay Bhattarai, Helal Maruf, Keith Stine

Chemistry & Biochemistry Faculty Works

Plasmonic-active nanomaterials are of high interest to scientists because of their expanding applications in the field for medicine and energy. Chemical and biological sensors based on plasmonic nanomaterials are well-established and commercially available, but the role of plasmonic nanomaterials on photothermal therapeutics, solar cells, super-resolution imaging, organic synthesis, etc. is still emerging. The effectiveness of the plasmonic materials on these technologies depends on their stability and sensitivity. Preparing plasmonics-active nanostructured thin films (PANTFs) on a solid substrate improves their physical stability. More importantly, the surface plasmons of thin film and that of nanostructures can couple in PANTFs enhancing the sensitivity. …

Modulation Of Semiconductor Photoconversion With Surface Modification And Plasmon, Joeseph Martin Bright

Graduate Theses, Dissertations, and Problem Reports

Semiconductor devices are the basis of modern technology. Semiconductor-based photoconversion devices that convert light into electrical signals have shown potential for light energy harvesting and conversion, environmental remediation, and sensors for detection of light, chemicals, and biological substances. Despite this potential for use in many applications, semiconductor photoconversion devices need further improvement in the photoconversion performance. This photoconversion improvement may be manifested as increased photoconversion efficiencies for light harvesting devices for power generation such as photovoltaics and photoelectrochemical (PEC) cells or improved photoconversion modulation to increase the sensitivity of semiconductor photoconversion-based sensors. In addition, alternative semiconductor materials to semiconductors that …

Parametric Optimization Of Visible Wavelength Gold Lattice Geometries For Improved Plasmon-Enhanced Fluorescence Spectroscopy, Casey A. Norville

Graduate Theses, Dissertations, and Problem Reports

The exploitation of spectro-plasmonics will allow for innovations in optical instrumentation development and the realization of more efficient optical biodetection components. Biosensors have been shown to improve the overall quality of life through real-time detection of various antibody-antigen reactions, biomarkers, infectious diseases, pathogens, toxins, viruses, etc. has led to increased interest in the research and development of these devices. Further advancements in modern biosensor development will be realized through novel electrochemical, electromechanical, bioelectrical, and/or optical transduction methods aimed at reducing the size, cost, and limit of detection (LOD) of these sensor systems. One such method of optical transduction involves the …

3d Janus Plasmonic Helical Nanoapertures For Polarization-Encrypted Data Storage, Yang Chen, Xiaodong Yang, Jie Gao

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Helical structures have attracted considerable attention due to their inherent optical chirality. Here, we report a unique type of 3D Janus plasmonic helical nanoaperture with direction-controlled polarization sensitivity, which is simply fabricated via the one-step grayscale focused ion beam milling method. Circular dichroism in transmission of as large as 0.72 is experimentally realized in the forward direction due to the spin-dependent mode coupling process inside the helical nanoaperture. However, in the backward direction, the nanoaperture acquires giant linear dichroism in transmission of up to 0.87. By encoding the Janus metasurface with the two nanoaperture enantiomers having specified rotation angles, direction-controlled …

Unidirectional And Nonreciprocal Nanophotonic Devices Based On Graphene And Magneto-Optical Materials, Vahid Foroughi Nezhad

LSU Doctoral Dissertations

In this dissertation, we first introduce compact tunable spatial mode converters for graphene parallel plate (GPP) waveguides. The converters are reciprocal and based on spatial modulation of graphene’s conductivity. The wavelength of operation of the mode converters is tunable in the mid-infrared wavelength range by adjusting the chemical potential of a strip on one of the graphene layers of the GPP waveguides. We also introduce optical diodes for GPP waveguides based on a spatial mode converter and a coupler, which consists of a single layer of graphene placed in the middle between the two plates of two GPP waveguides. \par …

Strong Circular Dichroism In Chiral Plasmonic Metasurfaces Optimized By Micro-Genetic Algorithm, Zhigang Li, Daniel Rosenmann, David A. Czaplewski, Xiaodong Yang, Jie Gao

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Strong circular dichroism in absorption in the near-infrared wavelength range is realized by designing binary-pattern chiral plasmonic metasurfaces via the micro-genetic algorithm optimization method. The influence of geometric parameter modifications in the binary-pattern nanostructures on the circular dichroism performance is studied. The strong circular dichroism in absorption is attributed to the simultaneous excitation and field interference of the resonant modes with relative phase delay under linearly polarized incident light. This work provides a universal design method toward the on-demand properties of chiral metasurfaces, which paves the way for future applications in chemical and biological sensing, chiral imaging and spectroscopy.

Potential For On-Site, Prosecutorial Evidence From Drug Residues Collected On Plasmonic Paper: A Pilot Study For Sers-Psi-Ms, Daniel S. Burr

Theses and Dissertations

Given the potential impact of improvements to on-site drug testing, as well as recent, successful displays of paper spray ionization mass spectrometry (PSI-MS) in this regard, this thesis pilots the implementation of Raman spectroscopy as a compliment to MS for field-based confirmatory drug testing. Surface enhanced Raman scattering (SERS) is utilized for applications to trace detection. Two-tiered analysis of individual drug samples is enabled using triangularly-cut plasmonic papers, from which both SERS and PS-MS analysis may be performed. Several drug compounds, representative of traditional and emerging drug types, are examined by these techniques, both separately and as a fully integrated, …

Generation Of Nondiffracting Vector Beams With Ring-Shaped Plasmonic Metasurfaces, Yuchao Zhang, Xiaodong Yang, Jie Gao

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Nondiffracting Bessel, Mathieu, and Weber vector beams are generated by using ring-shaped plasmonic geometric metasurfaces. The nondiffracting vector beam is produced by the superposition of two off-axis right-handed and left-handed circularly polarized nondiffracting scalar beams described by the Whittaker integral, which are simultaneously generated by a single metasurface with the ring-shaped phase profile. The polarization states of the generated nondiffracting vector beams are analyzed by the Stokes parameters and the orbital angular momentum states are measured by the beam interference. In addition, the selfhealing properties of nondiffracting vector beams are further demonstrated, showing that not only the beam profiles but …

Plasmonic Properties Of Nanoparticle And Two Dimensional Material Integrated Structure, Desalegn Tadesse Debu

Graduate Theses and Dissertations

Recently, various groups have demonstrated nano-scale engineering of nanostructures for optical to infrared wavelength plasmonic applications. Most fabrication technique processes, especially those using noble metals, requires an adhesion layer. Previously proposed theoretical work to support experimental measurement often neglect the effect of the adhesion layers. The first finding of this work focuses on the impact of the adhesion layer on nanoparticle plasmonic properties. Gold nanodisks with a titanium adhesion layer are investigated by calculating the scattering, absorption, and extinction cross-section with numerical simulations using a finite difference time domain (FDTD) method. I demonstrate that a gold nanodisk with an adhesive …

Tixzr(1-X)N Thin Films For Advanced Plasmonic Materials, Susan R. Schickling, Codi Ferree, Amy Godfrey, Andre Hillsman, Hannah Robinson

Chancellor’s Honors Program Projects

No abstract provided.

Plasmonic Metamaterials: Physical Background And Some Technological Applications, Benjamin G. Schmidt

Senior Honors Theses

New technological frontiers appear every year, and few are as intriguing as the field of plasmonic metamaterials (PMMs). These uniquely designed materials use coherent electron oscillations to accomplish an astonishing array of tasks, and they present diverse opportunities in many scientific fields.

This paper consists of an explanation of the scientific background of PMMs and some technological applications of these fascinating materials. The physics section addresses the foundational concepts necessary to understand the operation of PMMs, while the technology section addresses various applications, like precise biological and chemical sensors, cloaking devices for several frequency ranges, nanoscale photovoltaics, experimental optical computing …

Enhancing The Resolution Of Imaging Systems By Spatial Spectrum Manipulation, Wyatt Adams

Dissertations, Master's Theses and Master's Reports

Much research effort has been spent in the 21st century on superresolution imaging techniques, methods which can beat the diffraction limit. Subwavelength composite structures called ``metamaterials" had initially shown great promise in superresolution imaging applications in the early 2000s, owing to their potential for nearly arbitrary capabilities in controlling light. However, for optical frequencies they are often plagued by absorption and scattering losses which can decay or destroy their interesting properties. Similar issues limit the application of other superresolution devices operating as effective media, or metal films that can transfer waves with large momentum by supporting surface plasmon polaritons. In …

Study Of Optical Propulsion Concepts And Techniques For Small-Satellites, Jaykob Neil Maser

Doctoral Dissertations

"The first objective of this research is to manufacture and investigate the characteristics and use of asymmetric, metallic, nanostructures for plasmonic force propulsion, a developing method of nano-/picosatellite thrust generation. This project developed a higher-fidelity model of a recently envisioned small spacecraft propulsion system for precision pointing and proximity control. Plasmonic force propulsion harnesses solar light focused onto plasmon reactive sub-wavelength nanostructures to generate polarized oscillations of electrons on the surface of metallic nanostructures which accelerate and expel nanoparticle propellant via strong optical forces. This research also explores how material selection affects the electromagnetic response of the closely positioned asymmetric …

Sub-Nanometer Coupling Distance Control And Plasmon Enhanced Carrier Generation And Dynamics In Iii-V Semiconductor Heterostructures, Sharmin Haq

Optical Science and Engineering ETDs

Plasmonic modes in metal nanostructures enable light confinement at subwavelength scales. This field confinement is important for exploring the potential of nanotechnology in miniaturization of optics as well as for the advancement of optoelectronic devices, such as photodetectors, photovoltaics, and light-emitting diodes. Plasmon resonances are also ideal for developing ultrasensitive biosensors, and for enhancing surface photochemistry and photocatalysis. The increasing number of plasmon applications requires fundamental understanding of the plasmon coupled system which has not yet been completely understood. Controlling and engineering the plasmon response at the nanoscale will open still more applications in material science, communications, biochemistry and medicine. …

Spin-Controlled Wavefront Shaping With Plasmonic Chiral Geometric Metasurfaces, Yang Chen, Xiaodong Yang, Jie Gao

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Metasurfaces, as a two-dimensional (2D) version of metamaterials, have drawn considerable attention for their revolutionary capability in manipulating the amplitude, phase, and polarization of light. As one of the most important types of metasurfaces, geometric metasurfaces provide a versatile platform for controlling optical phase distributions due to the geometric nature of the generated phase profile. However, it remains a great challenge to design geometric metasurfaces for realizing spin-switchable functionalities because the generated phase profile with the converted spin is reversed once the handedness of the incident beam is switched. Here, we propose and experimentally demonstrate chiral geometric metasurfaces based on …

Optimizing The Plasmonic Enhancement Of Light In Metallic Nanogap Structures For Surface-Enhanced Raman Spectroscopy, Stephen Joseph Bauman

Graduate Theses and Dissertations

Technology based on the interaction between light and matter has entered something of a renaissance over the past few decades due to improved control over the creation of nanoscale patterns. Tunable nanofabrication has benefitted optical sensing, by which light is used to detect the presence or quantity of various substances. Through methods such as Raman spectroscopy, the optical spectra of solid, liquid, or gaseous samples act as fingerprints which help identify a single type of molecule amongst a background of potentially many other chemicals. This technique therefore offers great benefit to applications such as biomedical sensors, airport security, industrial waste …

Electromagnetic Wave-Matter Interactions In Complex Opto-Electronic Materials And Devices, Raj Kumar Vinnakota

Doctoral Dissertations

This dissertation explores the fundamentals of light-matter interaction towards applications in the field of Opto-electronic and plasmonic devices. In its core, this dissertation attempts and succeeds in the the modeling of light-matter interactions, which is of high importance for better understanding the rich physics underlying the dynamics of electromagnetic field interactions with charged particles. Here, we have developed a self-consistent multi-physics model of electromagnetism, semiconductor physics and thermal effects which can be readily applied to the field of plasmotronics and Selective Laser Melting (SLM). Plasmotronics; a sub-field of photonics has experienced a renaissance in recent years by providing a large …

Near-Infrared Chiral Plasmonic Metasurface Absorbers, Leixin Ouyang, Wei Wang, Daniel Rosenmann, David A. Czaplewski, Jie Gao, Xiaodong Yang

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Chirality plays an essential role in the fields of biology, medicine and physics. However, natural materials exhibit very weak chiroptical response. In this paper, near-infrared chiral plasmonic metasurface absorbers are demonstrated to selectively absorb either the left-handed or right-handed circularly polarized light for achieving large circular dichroism (CD) across the wavelength range from 1.3 µm to 1.8 µm. It is shown that the maximum chiral absorption can reach to 0.87 and that the maximum CD in absorption is around 0.70. The current chiral metasurface design is able to achieve strong chiroptical response, which also leads to high thermal CD for …

Thermal Radiation Measurement And Development Of Tunable Plasmonic Thermal Emitter Using Strain-Induced Buckling In Metallic Layers, Amir Kazemi-Moridani

Masters Theses

An infrared radiometry setup has been developed based on a commercially available FTIR spectrometer for measuring mid-infrared thermal radiation. The setup was calibrated with a lab-built blackbody source. The setup was tested with a grating structure with 4-micron periodicity. Periodic microstructures using nickel and gold are fabricated on elastomeric substrates by use of strain-induced buckling of the nickel layer. The intrinsically low emissivity of gold in the mid-infrared regime is selectively enhanced by the surface plasmonic resonance at three different mid-infrared wavelengths, 4.5 µm, 6.3 µm, and 9.4 µm. As the thermal emission enhancement effect exists only for the polarization …