Engineering Commons^™

Transforming Large-Scale Virtualized Networks: Advancements In Latency Reduction, Availability Enhancement, And Security Fortification, Ibrahim Tamim

Electronic Thesis and Dissertation Repository

In today’s digital age, the increasing demand for networks, driven by the proliferation of connected devices, data-intensive applications, and transformative technologies, necessitates robust and efficient network infrastructure. This thesis addresses the challenges posed by virtualization in 5G networking and focuses on enhancing next-generation Radio Access Networks (RANs), particularly Open-RAN (O-RAN). The objective is to transform virtualized networks into highly reliable, secure, and latency-aware systems. To achieve this, the thesis proposes novel strategies for virtual function placement, traffic steering, and virtual function security within O-RAN. These solutions utilize optimization techniques such as binary integer programming, mixed integer binary programming, column generation, …

Multi-Device Data Analysis For Fault Localization In Electrical Distribution Grids, Jacob D L Hunte

Electronic Thesis and Dissertation Repository

The work presented in this dissertation represents work which addresses some of the main challenges of fault localization methods in electrical distribution grids. The methods developed largely assume access to sophisticated data sources that may not be available and that any data sets recorded by devices are synchronized. These issues have created a barrier to the adoption of many solutions by industry. The goal of the research presented in this dissertation is to address these challenges through the development of three elements. These elements are a synchronization protocol, a fault localization technique, and a sensor placement algorithm.

The synchronization protocol …

Frequency Dependent Diffusion Kurtosis Measurement In The Human Brain With Oscillating Gradients, Kevin B. Borsos

Electronic Thesis and Dissertation Repository

Oscillating gradient spin-echo (OGSE) is an implementation of diffusion MRI that enables shorter effective diffusion times than the conventional pulse gradient spin-echo (PGSE) by periodically modulating the diffusion gradient. Measurements of the diffusion kurtosis, which reflects the degree of restricted diffusion, have previously been prohibited with OGSE due to technical limitations of clinical gradient systems. This thesis presents a novel oscillating gradient waveform that enables the measurement of kurtosis using OGSE without requiring advanced gradient hardware. Decreases of kurtosis are observed in OGSE acquisitions of healthy human subjects relative to PGSE, demonstrating the dependence of the kurtosis on oscillation frequency. …

Multi-Objective Optimization Of Green Transportation Operations In Supply Chain Management, Nayera Elgharably

Electronic Thesis and Dissertation Repository

Supply chain is the integration of manufacturing process where raw materials are converted into final products, then delivered to customers. Supply chains consists of two basic integrated process that interact together: (1) production and inventory and (2) distribution and logistics. Maximizing competitiveness and profitability are of the main goals of a supply chain. Accounting only for economic impacts as variable and fixed costs does not serve the main goal of the supply chain. Therefore, considering customer satisfaction measures in distribution models is essential in supply chain management. Models that addressed the three objectives simultaneously handled one of the objectives as …

Optimization Of Indentation For The Material Characterization Of Soft Pva-Cryogels, Md. Mansur Ul Mulk

Electronic Thesis and Dissertation Repository

Over the past few years a variety of clinical procedures aiming at tissue repair and other relevant therapies have been under active investigation [12,32]. Success of procedures aimed at soft tissue repair depend on the combined response of biochemical and biomechanical properties of the organs neighbouring the tissue [53]. Using human or animal cadaveric tissue for this purpose is very challenging due to issues pertaining to biodegradability and infection or biohazard risk factors [135,205].As such, tissue mimicking materials (e.g. Polyvinyl Alcohol Cryo-gel (PVA-C)) have been investigated to satisfy the need for the said clinical applications. Advantages of using tissue-mimicking materials …

Improved Fermentation Design And Screening Devices For Biobutanol Production, Garret Christopher Munch

Electronic Thesis and Dissertation Repository

A worldwide increase in demand for renewable fuels has revived interest in fermentatively produced butanol. However, butanol fermentation suffers from low product yields and productivity. The work presented in this thesis addresses part of these research and development needs at three levels: innovative fermentation process design; genetic manipulation for strain enhancement; and the development of a new tool for anaerobic process characterization and optimization.

Product yield could be increased through traditional fermentation engineering. Co-fermentation of butyric acid with glycerol increased the butanol yield from 0.45 mol/mol (mols C in butanol / mol C in substrates) to 0.51 mol/mol. In building …

Structural Optimization Of Cable-Stayed Bridges Considering The Action Of Permanent And Transitory Loads, Carolina Almeida Novaes Dos Santos

Electronic Thesis and Dissertation Repository

Cable-stayed bridges are complex structures with several advantages such as aesthetical appeal, economic use of materials, and efficient construction method. Due to these advantages and the extensive knowledge gained from projects over the years, longer cable-stayed bridges are being constructed. As span lengths increase, structures become more flexible, which makes the accurate evaluation of wind loads critically important in the design of cable-stayed bridges. A large number of variables are involved in the design of cable-stayed bridges. Those include overall geometric dimensions, cross-sectional dimensions, number of stay-cables and pre-tensioning forces to be applied to the cables. Taking all variables into …

The Effect Of Low Temperature And Low Light Intensity On Nutrient Removal From Municipal Wastewater By Purple Phototrophic Bacteria (Ppb), Peyman Dalaei

Electronic Thesis and Dissertation Repository

There has been increased interest in alternative wastewater treatment systems to improve nutrient recovery while achieving acceptable TCOD, TN, and TP discharge limits. Purple phototrophic bacteria (PPB) have a high potential for simultaneous nutrient removal and recovery from wastewater. This study evaluated the PPB performance and its growth at different operating conditions with a focus on HRT and light optimization using a continuous-flow membrane photobioreactor (PHB). Furthermore, the effect of low temperature on PPB performance was assessed to evaluate the PPB’s application in cold-climate regions. In order to evaluate PPB performance, TCOD, TN, and TP removal efficiencies and Monod kinetic …

Chemically Enhanced Primary Treatment Processes For Wastewater Resource Redirection And Its Impact On Downstream Processes, Tianchen Dong

Electronic Thesis and Dissertation Repository

There is a recent focus within the global wastewater industry on the steps being taken by treatment facilities to move towards net zero, or in some cases, energy positive operation. As part of maximizing energy recovery from the incoming wastewater, there has been increased attention upon the energy contained in the wastewater, and maximizing the redirection of more carbon captured through the primary treatment process rather than conventional removal through carbon oxidation. The chemically enhanced primary treatment (CEPT) process is a promising method for carbon redirection and improving the performance and efficiency of wastewater treatment processes. This research was conducted …

Maintaining And Controlling An Extrinsic Biofilm For Pathogen Removal In Dental Unit Water Lines, Bilal B. Al-Bataina

Electronic Thesis and Dissertation Repository

The control of biofilm formation is a major concern for industrial, environmental, and public health. Undesirable biofilms can harbor different disease-causing pathogens and shorten the operational life of different equipment. On the other hand, beneficial biofilms are also used in various applications and managing its growth and activity can be desirable. Killing the biofilm does not usually incorporate the removal of the dead biofilm structure that is adhered to the surface. Therefore, the aim of this thesis is to control biofilm formation; to be able to remove, inhibit, and enhance biofilm formation. This thesis investigated the use of norspermidine, D-amino …

Treatment Of Oil Sands Process-Affected Water Using Activated And Surface Modified Petroleum Coke For Organic Compounds Recovery, Hojatallah Seyedy Niasar

Electronic Thesis and Dissertation Repository

Each day large volumes of oil sands process-affected water (OSPW) are being produced during the extraction of bitumen in oil sands industry in northern Alberta. OSPW contains different polyaromatic hydrocarbons which not only are the major source of toxicity in OSPW, but also create operational problems such as corrosion of the equipment during bitumen recovery process. Therefore, these compounds need to be removed prior to the recycle of the OSPW. In this research, petroleum coke (PC) as an abundant, inexpensive adsorbent was selected as an adsorbent for recovery of chemicals from OSPW. The surface area and adsorption capacity of PC …

Co-Substrate Fermentation Of Jerusalem Artichoke Tubers And Crude Glycerol To Butanol With Integrated Product Recovery, Tahereh Sarchami

Electronic Thesis and Dissertation Repository

Butanol has long been considered a potential advanced liquid biofuel, in addition to its current application as an industrial solvent. It can be produced biologically; however, the conventional ABE fermentation suffers from many limitations, including low butanol titer, high cost of traditional raw materials, end-product inhibition and high butanol recovery costs. Possible solutions are the use of renewable low-cost feedstocks, genetic manipulations of Clostridia spp. to improve the strains’ butanol titer and tolerance, advanced fermentation techniques, and in-situ product recovery technologies.

In order to overcome some of these limitations, the overall goal of this thesis was to develop a process …

Modern Optimization Algorithms And Applications: Architectural Layout Generation And Parallel Linear Programming, Bradley J. De Vlugt

Electronic Thesis and Dissertation Repository

This thesis examines two topics from the field of computational optimization; architectural layout generation and parallel linear programming. The first topic, a modern problem in heuristic optimization, focuses on deriving a general form of the optimization problem and solving it with the proposed Evolutionary Treemap algorithm. Tests of the algorithm's implementation within a highly scalable web application developed with Scala and the web service framework Play reveal the algorithm is effective at generated layouts in multiple styles. The second topic, a classical problem in operations research, focuses on methodologies for implementing the Simplex Algorithm on a parallel computer for solving …

Assessment Of The Regionalization Of Precipitation In Two Canadian Climate Regions: A Fuzzy Clustering Approach, Sarah E. Irwin

Electronic Thesis and Dissertation Repository

Regional frequency analysis (RFA) is used to obtain reliable estimates of local precipitation events for a variety of applications in water resources engineering. The focus of the presented research is on an initial step of the RFA process; that is the formation of precipitation regions (also referred to as regionalization). The aim of this study is to dissect the regionalization procedure into its individual components that require subjective user input, and to evaluate their respective influences on the results. All assessments are conducted in two of Canada's climate regions; namely the Prairie and Great Lakes-St. Lawrence lowlands. Additionally, a new …

Synthesis, Characterization And Applications Of Lignin-Based Epoxy Resins, Fatemeh Ferdosian

Electronic Thesis and Dissertation Repository

Epoxy resin is one of the most versatile thermosetting polymers with diverse applications. Epoxy resins are mainly produced from the reaction of bisphenol-A (BPA) and epichlorohydrin. The consumption of bisphenol-A is facing growing concerns over its carcinogenic effects and its sustainability. Lignin can be a promising renewable substitute of bisphenol-A in the synthesis of epoxy resins.

In this thesis work, a novel method has been developed for the synthesis of bio-based epoxy resins with reduced side reactions, employing de-polymerized lignin from organosolv lignin (DOL), kraft lignin (DKL) and hydrolysis lignin (DHL) under alkaline condition in the presence of a phase …

On The Application Of Mechanical Vibration In Robotics-Assisted Soft Tissue Intervention, Iman Khalaji

Electronic Thesis and Dissertation Repository

Mechanical vibration as a way of transmitting energy has been an interesting subject to study. While cyclic oscillation is usually associated with fatigue effect, and hence a detrimental factor in failure of structures and machineries, by controlled transmission of vibration, energy can be transferred from the source to the target. In this thesis, the application of such mechanical vibration in a few surgical procedures is demonstrated.

Three challenges associated with lung cancer diagnosis and treatment are chosen for this purpose, namely, Motion Compensation, tumor targeting in lung Needle Insertion and Soft Tissue Dissection:

1. A robotic solution is proposed …

Development And Integration Of Mems Based Inductive Sensors, Luyang Zhang

Electronic Thesis and Dissertation Repository

Inductive sensors are one of the most widely used sensors especially in automotive. However, with the current PCB manufacture process, the large size of the sensor limits its usage in different applications. In this thesis, a novel method of fabricating bi-layer copper micro inductive sensor is demonstrated to solve the size issue. The two coil layers were built by UV LIGA process respectively, and a polyimide insulation film sandwiched in between. At the beginning, seeding layer was deposited on the substrate as electrode, and then the copper coil layer was created through electroplating in the patterned micromold. The coil was …

Optimal Sizing And Power Management Strategies Of Islanded Microgrids For Remote Electrification Systems, Faruk A. Bhuiyan

Electronic Thesis and Dissertation Repository

Over the past few years, electrification of remote communities with an efficient utilization of on-site energy resources has entered a new phase of evolution. However, the planning tools and studies for the remote microgrids are considered inadequate. Moreover, the existing techniques have not taken into account the impact of reactive power on component sizes. Thus, this thesis concentrates on optimal sizing design of an islanded microgrid (IMG), which is composed of renewable energy resources (RERs), battery energy storage system (BESS), and diesel generation system (DGS), for the purpose of electrifying off-grid communities. Owing to the utilization of both BESS and …

Design And Development Of Magneto-Rheological Actuators With Application In Mobile Robotics, Wenjun Li

Electronic Thesis and Dissertation Repository

In recent years, Magneto-Rheological (MR) fluids devices are widely studied and used for various purposes. Among these MR fluids devices, the MR actuator has attracted increasing attention for last two decades. An MR actuator is usually made of an active component (motor) and MR clutches. Compared with the regular actuators, the MR actuator features compliance due to the existence of MR fluids, which is commonly consider as benefits at the aspect of safety. On the other hand, the MR actuator has advantages on controllable bandwidth, torque-mass and torque-inertia ratios compared with the other compliant actuators.

In this study, a new …

Effects Of Surface Topographies On Heat And Fluid Flows, Hadi Vafadar Moradi

Electronic Thesis and Dissertation Repository

Responses of annular and planar flows to the introduction of grooves on the bounding surfaces have been analyzed. The required spectral algorithms based on the Fourier and Chebyshev expansions have been developed. The difficulties associated with the irregularities of the physical domain have been overcome using either the immersed boundary conditions (IBC) concept or the domain transformation method (DT).

Steady flows in annuli bounded by walls with longitudinal grooves have been studied. Analysis of pressure losses showed that the groove-induced changes can be represented as a superposition of a pressure drop due to a change in the average position of …

Production Of Lignin-Based Phenolic Resins Using De-Polymerized Kraft Lignin And Process Optimization, Homaira Siddiqui

Electronic Thesis and Dissertation Repository

Commercialization of Lignin-based phenol formaldehyde resins (LPF) has been limited due to the increase in curing temperatures and decrease in adhesive strength of LPF compared to conventional phenolic resins. Lignin depolymerization can increase the reactivity of lignin; however, the effect of lignin molecular weight on curing performance of LPF resins has yet to be investigated. This research work examined the optimization of synthesis parameters including percent substitution of phenol with lignin, formaldehyde- to-phenol ratio (F/P), and Mw of lignin to reduce the curing temperature and increase the adhesive strength of LPF. DSC analysis indicated that lignin with Mw ~1200g/mol resulted …

Comparison Between Three Types Of Cable Stayed Bridges Using Structural Optimization, Olfat Sarhang Zadeh

Electronic Thesis and Dissertation Repository

Cable stayed bridges have good stability, optimum use of structural materials, aesthetic, relatively low design and maintenance costs, and efficient structural characteristics. Therefore, this type of bridges are becoming more and more popular and are usually preferred for long span crossings compared to suspension bridges. A cable-stayed bridge consists of one or more towers with cables supporting the bridge deck. In terms of cable arrangements, the most common type of cable stayed bridges are fan, harp, and semi fan bridges. Because of their large size and nonlinear structural behaviour, the analysis of these types of bridges is more complicated than …

Fuzzy Differential Evolution Algorithm, Dejan Vucetic

Electronic Thesis and Dissertation Repository

The Differential Evolution (DE) algorithm is a powerful search technique for solving global optimization problems over continuous space. The search initialization for this algorithm does not adequately capture vague preliminary knowledge from the problem domain. This thesis proposes a novel Fuzzy Differential Evolution (FDE) algorithm, as an alternative approach, where the vague information of the search space can be represented and used to deliver a more efficient search. The proposed FDE algorithm utilizes fuzzy set theory concepts to modify the traditional DE algorithm search initialization and mutation components. FDE, alongside other key DE features, is implemented in a convenient decision …

Development Of Novel Solar Tracking And Heat Extracting Technologies, Hassan Latif Hassan

Electronic Thesis and Dissertation Repository

The global energy and water crises are looming due to the exponential population growth and the shrinking reserves of conventional fossil fuels and fresh water. The present research is aimed at the development of novel components/technologies that would lead to efficient and affordable concentrated solar thermal systems. A novel dual-axis solar tracking system has been developed, built and extensively tested on a field parabolic dish solar collector model. The tracker has two main novel components; active dual axis tracker; and load compensator. The tracker is characterized with simplicity and reliability. Two geometries of novel conical thermal receivers were designed, constructed …

Experimental And Numerical Development Of Anchor-Jointed Precast Structural Wall System And Optimum Design Of Prestressed Slabs, Mohamed El Semelawy

Electronic Thesis and Dissertation Repository

Precast concrete shear walls are used to resist lateral loads in low- to medium-rise buildings. An innovative joining technique is proposed to accelerate construction process and to reduce concrete damage possibility and capital loss during an earthquake event. Panels are jointed using steel anchor bolts, therefore, the system is designated "anchor-jointed precast structural wall system". In this system, anchors are utilized as a structural fuse. Damaged anchors are easily replaced after an earthquake, thus minimizing repair costs and serviceability disruptions. In the first part of this thesis, conceptual development of the system is carried out. A research program of combined …