Open Access. Powered by Scholars. Published by Universities.®
- Institution
-
- Chinese Chemical Society | Xiamen University (6)
- University of Arkansas, Fayetteville (4)
- University of Wollongong (4)
- University of Texas Rio Grande Valley (3)
- Selected Works (2)
-
- University of Nebraska - Lincoln (2)
- Boise State University (1)
- Edith Cowan University (1)
- Faculty of Engineering, Mansoura University (1)
- Iowa State University (1)
- Syracuse University (1)
- The University of Southern Mississippi (1)
- University of Kentucky (1)
- University of South Carolina (1)
- University of Tennessee, Knoxville (1)
- University of Texas at El Paso (1)
- Washington University in St. Louis (1)
- Western University (1)
- Wilfrid Laurier University (1)
- Publication Year
- Publication
-
- Journal of Electrochemistry (6)
- Australian Institute for Innovative Materials - Papers (4)
- Graduate Theses and Dissertations (4)
- Chemistry Faculty Publications and Presentations (3)
- Arts & Sciences Electronic Theses and Dissertations (1)
-
- Boise State University Theses and Dissertations (1)
- Daugherty Water for Food Global Institute: Faculty Publications (1)
- Dissertations - ALL (1)
- Doctoral Dissertations (1)
- Electronic Thesis and Dissertation Repository (1)
- Faculty Publications (1)
- Gordon Wallace (1)
- Institute for Sustainable Manufacturing Faculty Publications (1)
- Kaitlin M. Bratlie (1)
- Mansoura Engineering Journal (1)
- Master's Theses (1)
- Mikhail Vasiliev (1)
- Nebraska Water Center: Faculty Publications (1)
- Open Access Theses & Dissertations (1)
- Research outputs 2011 (1)
- Theses and Dissertations (Comprehensive) (1)
- Publication Type
Articles 1 - 30 of 34
Full-Text Articles in Engineering
Nanotechnology As Building Materials And Its Impact On The Quality Of Residential Buildings, Shekha Alrasheed, Hatem El Shafie
Nanotechnology As Building Materials And Its Impact On The Quality Of Residential Buildings, Shekha Alrasheed, Hatem El Shafie
Mansoura Engineering Journal
A modern technology called "nanotechnology" has emerged that seeks to environmental design through the use of new technologies and advanced scientific methods in the construction of contemporary architectural edifices. The research problem is the underutilization of nanotechnology in building materials for residential buildings due to the lack of knowledge of the benefits and cost of this technology. The importance of the study lies in the use of building materials based on nanotechnology with new properties and high performance that address the problems in current building materials so as to apply sustainability standards and provide efficiency for residential buildings to suit …
Rational Design Of Multifunctional Nanocatalysts For Environmental Remediation And Energy Conversion Technologies, Md Ariful Ahsan
Rational Design Of Multifunctional Nanocatalysts For Environmental Remediation And Energy Conversion Technologies, Md Ariful Ahsan
Open Access Theses & Dissertations
The discovery of efficient and sustainable carbon-based nanotechnologies to solve both the scarcity of drinking water and global energy crisis has become a paramount task in the last decades. Owed to the fast population growth and industrialization of the modern society, access to potable water and clean energy technologies is becoming very hard around the globe. Water pollutants have become a serious threat to the environment and ecology because of their toxic nature. Parallelly, the current hydrocarbon-based fuel industries are generating high levels of contamination across the planet, making imperative the development of cleaner energy technologies. In this regard, the …
Chitosan Graphene Composite Fabrication And Characterization For Treatment Of Harmful Algal Blooms And Toxins, Sarah Zetterholm
Chitosan Graphene Composite Fabrication And Characterization For Treatment Of Harmful Algal Blooms And Toxins, Sarah Zetterholm
Master's Theses
Chitosan graphene composites were fabricated and characterized as a management strategy for harmful algal blooms (HABs) caused by various species of cyanobacteria. These chitosan graphene materials were compared to previously studied chitosan graphene-oxide composites in both material properties and HAB treatment. In previous studies, adsorption of the cyanobacteria onto the surface of the composite materials has been observed. Investigations of the pure materials for these composites are also included in this study to determine whether removal is a result of charge interactions with the composite, or as an inherent property of the graphene or graphene oxide. Initial results suggest that …
Design And Development Of 2d Functional Semiconductor Nanocrystals, Andrew Hunter Davis
Design And Development Of 2d Functional Semiconductor Nanocrystals, Andrew Hunter Davis
Dissertations - ALL
Anisotropic nanocrystals (NCs) have become of keen interest in recent years, especially for applications in optoelectronic devices due to their directionally oriented emissions, narrow emission spectra, and suitable morphologies for device integration. Of the desired anisotropic NCs, two-dimensional (2D) NCs are of profound interest, due to their impressive optical and electronic properties as well as their prospective advantages towards applications in layered optoelectronic devices, such as solar cells. However, 2D NCs face many challenges, including limited synthetic derivation, as well as decreased stability and optical response, due to their large surface-to-volume ratio and reactive planar surface increasing surface defect state …
Nanomaterials In The Environment, Human Exposure Pathway, And Health Effects: A Review, Arindam Malakar, Sushil R. Kanel, Chittaranjan Ray, Daniel D. Snow, Mallikarjuna N. Nadagouda
Nanomaterials In The Environment, Human Exposure Pathway, And Health Effects: A Review, Arindam Malakar, Sushil R. Kanel, Chittaranjan Ray, Daniel D. Snow, Mallikarjuna N. Nadagouda
Daugherty Water for Food Global Institute: Faculty Publications
Nanomaterials (NMs), both natural and synthetic, are produced, transformed, and exported into our environment daily. Natural NMs annual flux to the environment is around 97% of the total and is significantly higher than synthetic NMs. However, synthetic NMs are considered to have a detrimental effect on the environment. The extensive usage of synthetic NMs in different fields, including chemical, engineering, electronics, and medicine, makes them susceptible to be discharged into the atmosphere, various water sources, soil, and landfill waste. As ever-larger quantities of NMs end up in our environment and start interacting with the biota, it is crucial to understand …
Editorial: Carbon- And Inorganic-Based Nanostructures For Energy Applications, Federico Cesano, M. Jasim Uddin, Yuanbing Mao, Muhammad N. Huda
Editorial: Carbon- And Inorganic-Based Nanostructures For Energy Applications, Federico Cesano, M. Jasim Uddin, Yuanbing Mao, Muhammad N. Huda
Chemistry Faculty Publications and Presentations
No abstract provided.
Mxenes As Flow Electrodes For Capacitive Deionization Of Wastewater, Naqsh E. Mansoor
Mxenes As Flow Electrodes For Capacitive Deionization Of Wastewater, Naqsh E. Mansoor
Boise State University Theses and Dissertations
The energy-water nexus poses an integrated research challenge, while opening up an opportunity space for the development of energy efficient technologies for water remediation. Capacitive Deionization (CDI) is an upcoming reclamation technology that uses a small applied voltage applied across electrodes to electrophoretically remove dissolved ionic impurities from wastewater streams. Similar to a supercapacitor, the ions are stored in the electric double layer of the electrodes. Reversing the polarity of applied voltage enables recovery of the removed ionic impurities, allowing for recycling and reuse. Simultaneous materials recovery and water reclamation makes CDI energy efficient and resource conservative, with potential to …
Spectroscopic Investigations Of Excited Charge Carriers In Ii-Vi Nanoparticles, William Matthew Sanderson
Spectroscopic Investigations Of Excited Charge Carriers In Ii-Vi Nanoparticles, William Matthew Sanderson
Arts & Sciences Electronic Theses and Dissertations
The large absorption cross sections and the tunability of the energetic spacings between the states in the conduction (CB) and valence band (VB) within a semiconductor nanoparticle (NP) make them promising media for capturing electromagnetic radiation and converting it into charge carriers, or electricity. In photovoltaic devices that incorporate semiconductor NPs, it would be ideal if every photon could be absorbed by a NP and the carriers could be collected with perfect efficiency and without loss of energy. The relaxation pathways of the carriers within the NPs down to the band edge and their fate at the band edge contribute …
Electrocatalytic Nanomaterials For Reduction Of Hydrogen Peroxide As Potential Radioprotectors, Rui-Hong Jia, Jin-Xuan Zhang, Xiao-Dong Zhang, Mei-Xian Li
Electrocatalytic Nanomaterials For Reduction Of Hydrogen Peroxide As Potential Radioprotectors, Rui-Hong Jia, Jin-Xuan Zhang, Xiao-Dong Zhang, Mei-Xian Li
Journal of Electrochemistry
Nanomaterials have shown many potential application prospects in the biomedical field, such as medical imaging, drug delivery and biosensing due to their unique physical and chemical properties. In this review we focus on nanomaterials that have shown not only abilities of radiation protection, but also good electrocatalytic activities toward reduction reactions of hydrogen peroxide and oxygen. We discuss the abilities of radiation protection of these nanomaterials that are ascribed to their enzyme-like activities because their catalytic properties provide an effective pathway for scavenging free radicals in vivo via rapid reactions with reactive oxygen species. We also provide insights into electrocatalytic …
Predicting The Mechanical Properties Of Nanocomposites Reinforced With 1-D, 2-D And 3-D Nanomaterials, Scott Edward Muller
Predicting The Mechanical Properties Of Nanocomposites Reinforced With 1-D, 2-D And 3-D Nanomaterials, Scott Edward Muller
Graduate Theses and Dissertations
Materials with features at the nanoscale can provide unique mechanical properties and increased functionality when included as part of a nanocomposite. This dissertation utilizes computational methods at multiple scales, including molecular dynamics (MD) and density functional theory (DFT), and the coupled atomistic and discrete dislocation multiscale method (CADD), to predict the mechanical properties of nanocomposites possessing nanomaterials that are either 1-D (carbyne chains), 2-D (graphene sheets), or 3-D (Al/amorphous-Si core-shell nanorod).
The MD method is used to model Ni-graphene nanocomposites. The strength of a Ni-graphene nanocomposite is found to improve by increasing the gap between the graphene sheet and a …
Application Of Nanomaterials In The Detection Of Volatile Organic Compounds In Exhaled Breath For Cancer Diagnosis, Wan-Qiao Bai, Xue-Zhi Qiao, Tie Wang
Application Of Nanomaterials In The Detection Of Volatile Organic Compounds In Exhaled Breath For Cancer Diagnosis, Wan-Qiao Bai, Xue-Zhi Qiao, Tie Wang
Journal of Electrochemistry
Volatile organic compounds (VOCs) generated in human body can reflect one’s health state, and numerous diseases are identified by some VOCs biomarkers. More recently, analyses of VOCs biomarkers from exhaled breath have turned into a research frontier worldwide because it offers a noninvasive way for diseases diagnosis. Various kinds of nanomaterials are used to enhance the performance of sensing techniques, and play an essential role in miniaturization detection. In this review, several kinds of nanomaterials (metallic, metal oxide, carbon-based, composites and MOFs-based materials) used in various VOCs detection methods, especially in VOCs sensors are summarized. Learning from the successful utilization …
Irrigation Water Quality—A Contemporary Perspective, Arindam Malakar, Daniel D. Snow, Chittaranjan Ray
Irrigation Water Quality—A Contemporary Perspective, Arindam Malakar, Daniel D. Snow, Chittaranjan Ray
Nebraska Water Center: Faculty Publications
In the race to enhance agricultural productivity, irrigation will become more dependent on poorly characterized and virtually unmonitored sources of water. Increased use of irrigation water has led to impaired water and soil quality in many areas. Historically, soil salinization and reduced crop productivity have been the primary focus of irrigation water quality. Recently, there is increasing evidence for the occurrence of geogenic contaminants in water. The appearance of trace elements and an increase in the use of wastewater has highlighted the vulnerability and complexities of the composition of irrigation water and its role in ensuring proper crop growth, and …
Recent Advances In Non-Noble Metal Nanomaterials For Oxygen Evolution Electrocatalysis, Dan-Dan Zhao, Nan Zhang, Ling-Zheng Bu, Qi Shao, Xiao-Qing Huang
Recent Advances In Non-Noble Metal Nanomaterials For Oxygen Evolution Electrocatalysis, Dan-Dan Zhao, Nan Zhang, Ling-Zheng Bu, Qi Shao, Xiao-Qing Huang
Journal of Electrochemistry
Hydrogen is a kind of renewable energies with the merits of environmentally friendly, abundance and high weight energy density, which can replace the fossil energy. The electrolysis of water is regarded as the most effective way to generate hydrogen. Owing to the sluggish kinetics and large overpotential of the anode oxygen evolution reaction (OER), the efficiency of the cathode hydrogen evolution reaction is greatly limited. Therefore, it is highly desirable to explore efficient, stable and low cost electrocatalysts to reduce the overpotential of OER and improve the efficiency of hydrogen evolution. Based on the natural characteristics of non-noble metal catalysts …
Opto-Thermal Characterization Of Plasmon And Coupled Lattice Resonances In 2-D Metamaterial Arrays, Vinith Bejugam
Opto-Thermal Characterization Of Plasmon And Coupled Lattice Resonances In 2-D Metamaterial Arrays, Vinith Bejugam
Graduate Theses and Dissertations
Growing population and climate change inevitably requires longstanding dependency on sustainable sources of energy that are conducive to ecological balance, economies of scale and reduction of waste heat. Plasmonic-photonic systems are at the forefront of offering a promising path towards efficient light harvesting for enhanced optoelectronics, sensing, and chemical separations. Two-dimensional (2-D) metamaterial arrays of plasmonic nanoparticles arranged in polymer lattices developed herein support thermoplasmonic heating at off-resonances (near infrared, NIR) in addition to regular plasmonic resonances (visible), which extends their applicability compared to random dispersions. Especially, thermal responses of 2-D arrays at coupled lattice resonance (CLR) wavelengths were comparable …
Analysis Of Surface Integrity In Machining Of Aisi 304 Stainless Steel Under Various Cooling And Cutting Conditions, F. Klocke, B. Döbbeler, S. Lung, S. Seelbach, Ibrahim S. Jawahir
Analysis Of Surface Integrity In Machining Of Aisi 304 Stainless Steel Under Various Cooling And Cutting Conditions, F. Klocke, B. Döbbeler, S. Lung, S. Seelbach, Ibrahim S. Jawahir
Institute for Sustainable Manufacturing Faculty Publications
Recent studies have shown that machining under specific cooling and cutting conditions can be used to induce a nanocrystalline surface layer in the workspiece. This layer has beneficial properties, such as improved fatigue strength, wear resistance and tribological behavior. In machining, a promising approach for achieving grain refinement in the surface layer is the application of cryogenic cooling. The aim is to use the last step of the machining operation to induce the desired surface quality to save time-consuming and expensive post machining surface treatments. The material used in this study was AISI 304 stainless steel. This austenitic steel suffers …
Nonlinear Coupled Effects In Nanomaterials, Sia Bhowmick
Nonlinear Coupled Effects In Nanomaterials, Sia Bhowmick
Theses and Dissertations (Comprehensive)
Materials at the nanoscale have different chemical, structural, and optoelectrical properties compared to their bulk counterparts. As a result, such materials, called nanomaterials, exhibit observable differences in certain physical phenomena. One such resulting phenomenon called the piezoelectric effect has played a crucial role in miniature self-powering electronic devices called nanogenerators which are fabricated by using nanostructures, such as nanowires, nanorods, and nanofilms. These devices are capable of harvesting electrical energy by inducing mechanical strain on the individual nanostructures. Electrical energy created in this manner does not have environmental limitations. In this thesis, important coupled effects, such as the nonlinear piezoelectric …
Doped Tio2 Nanowires For Applications In Dye Sensitized Solar Cells And Sacrifical Hydrogen Production, Qasem Alsharari
Doped Tio2 Nanowires For Applications In Dye Sensitized Solar Cells And Sacrifical Hydrogen Production, Qasem Alsharari
Electronic Thesis and Dissertation Repository
This thesis explores the synthesis of metal oxide 1-D nanowires using a sol-gel method in supercritical carbon dioxide (sc-CO2), as an environmental friendly enabling solvent. Porous nanowires were synthesized and their performance was tested in dye sensitized solar cell and sacrifical hydrogen production. Titanium isopropoxide (TIP) was used as a precursor for titania synthesis while copper, bismuth and indium were examined as dopants, respectively. The sol-gel reactions were catalyzed by acetic acid in CO2 at a temperature of 60 °C and pressure of 5000 psi. It was observed that acetic acid/monomer ratio > 4 produced nanowires while a …
A Comparative Study Of Polyurethane Nanofibers With Different Patterns And Its Analogous Nanofibers Containing Mwcnts, Javier Macossay-Torres, Faheem A. Sheikh, Hassan Ahmad, Hern Kim, Gary L. Bowlin
A Comparative Study Of Polyurethane Nanofibers With Different Patterns And Its Analogous Nanofibers Containing Mwcnts, Javier Macossay-Torres, Faheem A. Sheikh, Hassan Ahmad, Hern Kim, Gary L. Bowlin
Chemistry Faculty Publications and Presentations
Tissue engineering is a multidisciplinary field that has evolved in various dimensions in recent years. One of the main aspects in this field is the proper adjustment and final compatibility of implants at the target site of surgery. For this purpose, it is desired to have the materials fabricated at the nanometer scale, since these dimensions will ultimately accelerate the fixation of implants at the cellular level. In this study, electrospun polyurethane nanofibers and their analogous nanofibers containing MWCNTs are introduced for tissue engineering applications. Since MWCNTs agglomerate to form bundles, a high intensity sonication procedure was used to disperse …
Enhancement Of The Performance Of Gaas Based Solar Cells By Using Plasmonic, Anti-Reflection Coating And Hydrophobic Effects, Yahia Fayiz Makableh
Enhancement Of The Performance Of Gaas Based Solar Cells By Using Plasmonic, Anti-Reflection Coating And Hydrophobic Effects, Yahia Fayiz Makableh
Graduate Theses and Dissertations
Investigation of renewable energy resources is gaining huge momentum in recent years due to the limited fossil fuels, and their detriment impact on the environment. Solar energy is promising to meet the increased energy demand. In order to achieve this goal, solar energy has to be harvested efficiently at low cost. Therefore, higher efficiency solar cells are the primary focus of research worldwide. Photovoltaics based on InAs/GaAs intermediate band solar cells and their device performance enhancements are investigated in this dissertation. The device enhancement is carried out by surface modification methods. The dissertation work is inspired by the need of …
Metal-Semiconductor-Metal (Msm) Photodetectors With Plasmonic Nanogratings, Narottam K. Das, Ayman Karar, C L Tan, Mikhail Vasiliev, Kamal Alameh, Yong Tak Lee
Metal-Semiconductor-Metal (Msm) Photodetectors With Plasmonic Nanogratings, Narottam K. Das, Ayman Karar, C L Tan, Mikhail Vasiliev, Kamal Alameh, Yong Tak Lee
Mikhail Vasiliev
We discuss the light absorption enhancement factor dependence on the design of nanogratings inscribed into metal-semiconductor-metal photodetector (MSM-PD) structures. These devices are optimized geometrically, leading to light absorption improvement through plasmon-assisted effects. Finite-difference time-domain (FDTD) simulation results show ~50 times light absorption enhancement for 850 nm light due to improved optical signal propagation through the nanogratings. Also, we show that the light absorption enhancement is strongly dependent on the nanograting shapes in MSM-PDs.
A New Nonenzymatic Glucose Sensor Based On The Cuo Nanoplatelets, Yan-Cai Li, Fu-Ying Huang, Shun-Xing Li, Jie Chen, Shu-Qing Feng, Fei Wang
A New Nonenzymatic Glucose Sensor Based On The Cuo Nanoplatelets, Yan-Cai Li, Fu-Ying Huang, Shun-Xing Li, Jie Chen, Shu-Qing Feng, Fei Wang
Journal of Electrochemistry
The CuO nanoplatelets were synthesized by hydrothermal method. The structure and morphology of the CuO nanoplatelets were characterized by TEM and XRD. A new nonenzymatic glucose sensor was constructed by immobilizing the CuO nanoplatelets on glassy carbon electrode with Nafion. The electrochemical performance of the CuO/Nafion/GCE for the detection of glucose was investigated by cyclic voltammetry and current-time curve. The experiment results showed that the linear dependence of the sensor was 0.01 to 0.3 mmol·L-1 for glucose with a sensitivity of 1783.58 μA·mmol-1·L·cm-2, and the detection limit of the sensor was 0.80 μmol·L-1 ( …
Novel Bimetallic Plasmonic Nanomaterials, Ritesh Sachan
Novel Bimetallic Plasmonic Nanomaterials, Ritesh Sachan
Doctoral Dissertations
Plasmonic nanomaterials have attracted a lot of attention recently due to their application in various fields such as chemical and biological sensing, catalysis, energy harvesting and optical devices. However, there is a need to address several outstanding issues with these materials, including cost-effective synthesis, tunability in plasmonic characteristics, and long term stability. In this thesis, we have focused on bimetallic nanoparticles (NPs) of Ag and Co due to their immiscibility as well as their individual properties. First, a pulsed laser induced dewetting route was used to synthesize Ag-Co bimetallic plasmonic NPs. An synthesis parameter space was derived to show the …
Printing Nanomaterials Using Non-Contact Printing, Charles Mire, Marc In Het Panhuis, Paul D. Calvert, Gordon G. Wallace
Printing Nanomaterials Using Non-Contact Printing, Charles Mire, Marc In Het Panhuis, Paul D. Calvert, Gordon G. Wallace
Gordon Wallace
We report on the use of inkjet, extrusion, and capillary printing of poly(3,4 ethylenedioxythiophene)/ poly(sodium 4-styrene-sulfonate) (PEDOT/PSS) to create structures that could be used in a flexible, implantable bionic device. Resistance values as low as 250 kΩ are demonstrated, with little deviation under as much as 1.5% strain. The results show PEDOT/PSS can be a suitable material for printed bionic devices.
Charge-Controlled Switchable Co2 Capture On Boron Nitride Nanomaterials, Qiao Sun, Zhen Li, Debra J. Searles, Ying Chen, Gao Qing (Max) Lu, Aijun Du
Charge-Controlled Switchable Co2 Capture On Boron Nitride Nanomaterials, Qiao Sun, Zhen Li, Debra J. Searles, Ying Chen, Gao Qing (Max) Lu, Aijun Du
Australian Institute for Innovative Materials - Papers
Increasing concerns about the atmospheric CO2 concentration and its impact on the environment are motivating researchers to discover new materials and technologies for efficient CO2 capture and conversion. Here, we report a study of the adsorption of CO2, CH4, and H2 on boron nitride (BN) nanosheets and nanotubes (NTs) with different charge states. The results show that the process of CO2 capture/release can be simply controlled by switching on/off the charges carried by BN nanomaterials. CO2 molecules form weak interactions with uncharged BN nanomaterials and are weakly adsorbed. When extra electrons are introduced to these nanomaterials (i.e., when they are …
An Overview - Functional Nanomaterials For Lithium Rechargeable Batteries, Supercapacitors, Hydrogen Storage, And Fuel Cells, Hua-Kun Liu
Australian Institute for Innovative Materials - Papers
There is tremendous worldwide interest in functional nanostructured materials, which are the advanced nanotechnology materials with internal or external dimensions on the order of nanometers. Their extremely small dimensions make these materials unique and promising for clean energy applications such as lithium ion batteries, supercapacitors, hydrogen storage, fuel cells, and other applications. This paper will highlight the development of new approaches to study the relationships between the structure and the physical, chemical, and electrochemical properties of functional nanostructured materials. The Energy Materials Research Programme at the Institute for Superconducting and Electronic Materials, the University of Wollongong, has been focused on …
Hollow Nitrogen Containing Core/Shell Fibrous Carbon Nanomaterials As Support To Platinum Nanocatalysts And Their Tem Tomography Study, Cuifeng Zhou, Zongwen Liu, Xusheng Du, David Rg Mitchell, Yiu-Wing Mai, Yushan Yan, Simon Peter Ringer
Hollow Nitrogen Containing Core/Shell Fibrous Carbon Nanomaterials As Support To Platinum Nanocatalysts And Their Tem Tomography Study, Cuifeng Zhou, Zongwen Liu, Xusheng Du, David Rg Mitchell, Yiu-Wing Mai, Yushan Yan, Simon Peter Ringer
Australian Institute for Innovative Materials - Papers
Core/shell nanostructured carbon materials with carbon nanofiber (CNF) as the core and a nitrogen (N)-doped graphitic layer as the shell were synthesized by pyrolysis of CNF/polyaniline (CNF/PANI) composites prepared by in situ polymerization of aniline on CNFs. High-resolution transmission electron microscopy (TEM), X-ray diffraction (XRD), Fourier transform infrared and Raman analyses indicated that the PANI shell was carbonized at 900 degress C. Platinum (Pt) nanoparticles were reduced by formic acid with catalyst supports. Compared to the untreated CNF/ PANI composites, the carbonized composites were proven to be better supporting materials for the Pt nanocatalysts and showed superior performance as catalyst …
A Simple Approach For Synthesis, Characterization And Bioactivity Of Bovine Bones To Fabricate The Polyurethane Nanofiber Containing Hydroxyapatite Nanoparticles, Faheem A. Sheikh, M. A. Kanjwal, Javier Macossay-Torres, N. A. M. Barakat, H. Y. Kim
A Simple Approach For Synthesis, Characterization And Bioactivity Of Bovine Bones To Fabricate The Polyurethane Nanofiber Containing Hydroxyapatite Nanoparticles, Faheem A. Sheikh, M. A. Kanjwal, Javier Macossay-Torres, N. A. M. Barakat, H. Y. Kim
Chemistry Faculty Publications and Presentations
In the present study, we had introduced polyurethane (PU) nanofibers that contain hydroxyapatite (HAp) nanoparticles (NPs) as a result of an electrospinning process. A simple method that does not depend on additional foreign chemicals had been employed to synthesize HAp NPs through the calcination of bovine bones. Typically, a colloidal gel consisting of HAp/PU had been electrospun to form nanofibers. In this communication, physiochemical aspects of prepared nanofibers were characterized by FE-SEM, TEM and TEM-EDS, which confirmed that nanofibers were well-oriented and good dispersion of HAp NPs, over the prepared nanofibers. Parameters, affecting the utilization of the prepared nanofibers in …
New Interfacial Nanochemistry On Sensory Bioscaffold-Membranes Of Nanobelts, Feng Chen
New Interfacial Nanochemistry On Sensory Bioscaffold-Membranes Of Nanobelts, Feng Chen
Graduate Theses and Dissertations
Nanostructured bioscaffolds and biosensors are evolving as popular and powerful tools in life science and biotechnology, due to the possible control of their surface and structural properties at the nm-scale. Being seldom discussed in literature and long-underexploited in materials and biomedical sciences, development of nanofiber-based sensory bioscaffolds has great promises and grand challenges in finding an ideal platform for low-cost quantifications of biological and chemical species in real-time, label-free, and ultrasensitive fashion. In this study, titanate nanobelts were first of all synthesized, from hydrothermal reactions of a NaOH (or KOH solution) with TiO2 powder, to possess underexploited structure and surface …
Metal-Semiconductor-Metal (Msm) Photodetectors With Plasmonic Nanogratings, Narottam K. Das, Ayman Karar, C L Tan, Mikhail Vasiliev, Kamal Alameh, Yong Tak Lee
Metal-Semiconductor-Metal (Msm) Photodetectors With Plasmonic Nanogratings, Narottam K. Das, Ayman Karar, C L Tan, Mikhail Vasiliev, Kamal Alameh, Yong Tak Lee
Research outputs 2011
We discuss the light absorption enhancement factor dependence on the design of nanogratings inscribed into metal-semiconductor-metal photodetector (MSM-PD) structures. These devices are optimized geometrically, leading to light absorption improvement through plasmon-assisted effects. Finite-difference time-domain (FDTD) simulation results show ~50 times light absorption enhancement for 850 nm light due to improved optical signal propagation through the nanogratings. Also, we show that the light absorption enhancement is strongly dependent on the nanograting shapes in MSM-PDs.
Applications Of Block Copolymer Films In The Field Of Electrochemical Energy Systems, Jing-Ze Li, Guo-Guang Chen, Di Mei, Wei Zou, Jian-Wen Li, Motonori Komura, Tomokazu Iyoda
Applications Of Block Copolymer Films In The Field Of Electrochemical Energy Systems, Jing-Ze Li, Guo-Guang Chen, Di Mei, Wei Zou, Jian-Wen Li, Motonori Komura, Tomokazu Iyoda
Journal of Electrochemistry
A new series of amphiphilic liquid crystalline block copolymer thin films,having normally aligned and highly ordered nanocylinder array,were functionalized as anisotropic ion conducting materials by selectively infiltration.These ion-active nanocylinders are coaxially aligned and hexagonally arranged in a large area,which might be used as novel types of electrolyte films for electrochemical energy systems such as lithium ion battery,fuel cell,etc.Since the ordered cylinders can carry on and store the ions,the block copolymer films can be utilized as the advanced template to fabricate the ordered array of nanoporous,nanoparticles,and nanowires for the potential application in lithium ion battery as three dimensional electrode materials.