Engineering Commons^™

System Performance Model And Control System For A Small-Scale Horizontal Axis Wind Turbine, Niko Banks

Master's Theses

Predicting the performance of wind turbines is a key part of the turbine design process and operation, as predictive models play a large role in determining potential power output and efficiency at different operating conditions to help maximize production. On small-scale wind turbines performance models become more complex, as the rotor aerodynamic performance depends not only on the tip speed ratio, but also on the flow Reynolds number. An accurate predictive model that includes this behavior on small-scale wind turbines can be used to find the optimal operating conditions for power output, and is also a critical component of the …

Development Of A Model And Imbalance Detection System For The Cal Poly Wind Turbine, Ryan Miki Takatsuka

Master's Theses

This thesis develops a model of the Cal Poly Wind Turbine that is used to determine if there is an imbalance in the turbine rotor. A theoretical model is derived to estimate the expected vibrations when there is an imbalance in the rotor. Vibration and acceleration data are collected from the turbine tower during operation to confirm the model is useful and accurate for determining imbalances in the turbine.

Digital signal processing techniques for analyzing the vibration data are explored and tested with simulation data. This includes frequency shifts, lock-in amplifiers, phase-locked loops, discrete Fourier transforms, and decimation filters. The …

Wing Deflection Analysis Of 3d Printed Wind Tunnel Models, Matthew G. Paul

Master's Theses

This work investigates the feasibility of producing small scale, low aerodynamic loading wind tunnel models, using FDM 3D printing methods, that are both structurally and aerodynamically representative in the wind tunnel. To verify the applicability of this approach, a 2.07% scale model of the NASA CRM was produced, whose wings were manufacturing using a Finite Deposition Modeling 3D printer. Experimental data was compared to numerical simulations to determine percent difference in wake distribution and wingtip deflection for multiple configurations.

Numerical simulation data taken in the form of CFD and FEA was used to validate data taken in the wind tunnel …

Sysml Based Cubesat Model Design And Integration With The Horizon Simulation Framework, Shaun Luther

Master's Theses

This thesis examines the feasibility of substituting the system input script of Cal Poly’s Horizon Simulation Framework (HSF) with a Model Based Systems Engineering (MBSE) model designed with the Systems Modeling Language (SysML). A concurrent student project, SysML Output Interface Creation for the Horizon Simulation Framework, focused on design of the HSF Translator Plugin which converts SysML models to an HSF specific XML format. A SysML model of the HSF test case, Aeolus, was designed. The original Aeolus HSF input script and the translated SysML input script retained the format and dependency structure required by HSF. Both input scripts …

Ncma Groundwater Model Using Usgs Modflow-2005/Pest, Brian Matthew Wallace

Master's Theses

A numerical model for the NCMA aquifer complex is presented. The objective of the study is to develop a numerical groundwater model for the NCMA aquifer system to enhance the understanding of subsurface groundwater flow. Infiltration, streamflow, pumping, and return flows are implemented to characterize the aquifer complex over time. The numerical model is calibrated to municipal and monitoring well data, average monthly water balances, and hydraulic contours. Transient aquifer inflows and outflows are assessed in the results of the study and are compared to balance terms from previous studies. The 2007 Todd Engineers Study subsurface inflows and outflows generate …

The Creation, Analysis, And Verification Of A Comprehensive Model Of A Micro Ion Thruster, Maxwell J. Bodnar

Master's Theses

A computational model of the micro-ion thruster MiXI has been developed, analyzed, and partially verified. This model includes submodels that govern the physical, magnetic, electrostatic, plasma physics, and power deposition of the thruster. Over the past few years, theses have been conducted with the goal of running tests and analyzing the results; this model is used to understand how the thruster components interact so as to make predictions about, and allow for optimization of, the thruster operation. Testing is then performed on the thruster and the results are compared to the output of the code. The magnetic structure of the …

Methane Production By A Packed-Bed Anaerobic Digester Fed Dairy Barn Flush Water, Sean Richard Thomson

Master's Theses

Packed-bed digesters are an alternative to covered lagoon digesters for methane production and anaerobic treatment of dilute wastewaters such as dairy barn flush water. The physical media of packed-beds retain biofilms, often allowing increased treatment rates. Previous studies have evaluated several types of media for digestion of dilute wastewaters, but cost and media fouling have setback commercial development. A major operational cost has been effluent recirculation pumping.

In the present effort, a novel approach to anaerobic digestion of flush dairy water was developed at pilot-scale: broken walnut shells were used as a low-cost packed-bed medium and effluent recirculation was replaced …

The Application Of Systems Engineering Principles To Model Lithium Ion Battery Voltage, George Gibbs

Master's Theses

The objective of this project is to present a Lithium Ion battery voltage model derived using systems engineering principles. This paper will describe the details of the model and the implementation of the model in practical use in a power system. Additionally, the model code is described and results of the model output are compared to battery cell test data. Finally, recommendations for increased model fidelity and capability are summarized.

The modeling theory has been previously documented in the literature but detailed implementation and application of the modeling theory is shown. The detailed battery cell test voltage profiles are proprietary; …

A New Computational Model To Augment The Design Of Microfluidic Separations: Electric Field Assisted, Hydrodynamic Chromatography, Jeffrey D. Wells

Master's Theses

This project encompasses the implementation of a computational model to simulate the microfluidic separation of like-charged particles in a continuous flow environment. By accomplishing this task the model can be used to optimize future fractionations by tailoring the process parameters to the properties of the target particles. The primary goal of this project is to develop a vectorized code within Matlab® that captures a sufficient quantity of the physics in separations to assist with the optimization and design of microfluidic systems.

This project differs from other computational models in that it utilizes a personal computer to run the simulation in …