Standardizing Hands-On Building Activities In Commercial Construction Management And Recommendations For Semester Conversion Adaptations, Lauren T. Mcclurg

Construction Management

CM 313 Commercial Construction Management at Cal Poly is an integrated lab course and one of the main hands-on learning experiences construction management students participate in. It is currently administered in the quarter system and as the university transitions to the semester calendar, the lab needs to be converted in order to accommodate this change. The main purpose of this project was to document existing practices and improve the process and experience for students, instructional students assistants, Simpson Strong Tie coordinator, and other professors of CM 313. This project included creating a builders guide to help the student assistants by …

Creating A Demolition Estimate Lab Assignment, Alex Domine

Construction Management

This senior project aims to create a Demolition Estimate Lab as part of Cal Poly, San Luis Obispo's Demolition Topics Course, with the goal of enhancing construction education through practical experience in estimating demolition costs. The Lab will be equipped with industry-standard tools and software to simulate diverse demolition scenarios, covering site preparation, equipment requirements, waste disposal, labor needs, and environmental considerations. The project methodology entails extensive research and the integration of interactive learning activities. This initiative is expected to yield several benefits for students. Firstly, it will lead to improved learning outcomes by providing hands-on experience in estimating demolition …

Paso Robles Police Department Shooting Range Electrical Installation, Shelby I. Prosch

Construction Management

The Paso Police Department has a shooting range for police officers to practice and master using firearms. A shooting range is a crucial part of police officer training to ensure public safety and correct and accurate usage of safety weapons. The construction for the shooting range began in the spring of 2021 by Cal Poly students where they laid the foundation. I became involved to further the progress of the shooting range by installing an electrical system. For that phase to begin, I completed a pre-construction package that details the materials and steps for installation. The package includes a scope …

Campus Improvement Cm460 Manual To Improve Project Based Success, John C. Palmer

Construction Management

This Senior project research will critically assess the process for campus improvement on the Cal Poly Campus. The purpose of this research is providing a final deliverable that is a usable document for future students with the intention of creating a campus improvement project. The project includes the necessary resources such as campus facility contacts, permitting process explanation, the documentation process for preconstruction, funding opportunities and the expected delays to create a realistic plan. The document is created as a manual for Construction Management undergraduates in hopes of encouraging future students to create a project-based campus-improvement plan that is more …

Development Of A Marine Biodegradable Target Balloon, Blake Samuel Robinson, Arash Sam Akhavi, David Leonardo Albarran-Martinez

Materials Engineering

The US Navy utilizes PVC target balloons, known as Killer Tomatoes, that are inflated onboard a naval vessel then deployed into the ocean to calibrate a variety of weaponry. The Navy has requested the investigation of biodegradable polymers to replace the PVC in attempts to reduce ocean waste that is generated from the leftover PVC material. After communicating with American Pacific Plastic Fabricators (APPF), the current manufacturer of the Killer Tomatoes, we gained an understanding of the manufacturing process and the material requirements that would allow a new material to be integrated into their current process. Two proprietary, trial polymers …

Creating A More Diverse And Inclusive Environment In The Cal Poly Construction Management Department, Miriam Robles

Construction Management

This study looks at how to increase diversity and inclusivity in the Cal Poly Construction Management Department. It is becoming increasingly important to promote diversity and inclusivity not just in the classroom, but also in the workforce. It is important for the Cal Poly CM program to put more of an emphasis on trying to create a more a diverse major and acknowledge the importance of having inclusivity and diversity in the major. This project researched ways in which other universities have used different methods to increase diversity and create a more inclusive culture on their campus. This research was …

Refurbishment Of Exterior Wooden Panels Of Simpson Strong Tie Building, Isidoro A. Amalfitano

Construction Management

This paper outlines the refurbishment of the exterior wood panels located on the Simpson Strong Tie Building on the Cal Poly San Luis Obispo campus. This project focuses on the two large 50 square foot wooden panels that act as an exterior skin for the Simpson Strong Tie Building. This project is an individual project that was broken up into 4 phases. This paper will cover all 4 phases of the refurbishment process. These phases include the removal, sanding, staining and reapplication of wood panels onto the Simpson Strong Tie Building. Furthermore, this paper will go in depth about the …

Interdisciplinary Student Competition For California Polytechnic State University - San Luis Obispo, Forest G. Gobble

Construction Management

Cal Poly has a reputation for producing some of the best qualified graduates in their respective fields of study. While this is very important, curricular activities involving collaboration between students within the same college are limited (excluding same major). Beyond that, collaboration opportunities across colleges are even more rare. When graduates enter the workforce, many are thrust into highly collaborative environments across various disciplines. Industry professionals have shown a strong desire for young people who have had exposure to realistic problems and experience working with other professions outside of their own field of expertise. The question needing answering is, would …

Cal Poly Engineering East – Building 20, A Critical Analysis Of Mechanical Needs And Distribution Of Mechanical Resources, Rhea Bae

Construction Management

Older buildings on the Cal Poly campus need renovation, particularly with the heating, ventilation, air-conditioning (addressed as HVAC) systems in the classrooms. The HVAC units within the old buildings are obsolete, inefficient, and are most likely due for replacement. The Engineering East building, also known as Building 20, is an example of a campus building that requires a quality HVAC system. By upgrading the HVAC, the building conditions can be positively enhanced through better cooling and ventilation, allowing students in the labs and classrooms to have a better experience within the building. This paper details the methodology behind installing a …

A Continuation Of The Women In Construction Club’S Industry Mentorship Program And A Measure Of Its Effectiveness, Alexa S. Heien

Construction Management

The Women in Construction Club’s Industry Mentorship program at California Polytechnic State University, San Luis Obispo (Cal Poly) is nearly a year old, yet the only data collected on the program was taken directly after it was created. The creation of the Industry Mentorship program, and subsequent data collection, were a previous senior project. But there were no measurements on how effective the mentorship program was, or if there was a benefit for the students involved. Because this program has the potential of creating long-lasting relationships and connecting women in a men-dominated field, knowing if the mentorship program needs to …

Implementing Coordination Lab And Lesson Into Cm 413 - Job Site, Connor R. Westover

Construction Management

Coordination can make or break a job. The act of coordination and the millions of pieces that go into a single project can directly affect both the schedule and budget of a construction project. Coordination is not a single part of the job, it is an on-going process that continuously involves all entities of the project. The importance of coordination and what it entails is not yet captured in the Cal Poly Construction Management curriculum. The purpose of this project would be to capture that importance and continue to build upon it to better prepare Cal Poly Builders for the …

A Study Of Cal Poly Students' Preferred Career Path: A Focus On Alumni, Jesse D. Longchamps

Construction Management

The construction industry is a fragile system with an intricate mix of field and office – labor and management. Theses two branches are critical to keeping any project running smoothly. However, the industry is noticeably changing and this fragile structure is deteriorating. Field positions are getting tougher and tougher to fill for most companies in the construction industry. Without skilled field employees, the companies are losing one of the two most important aspects of construction. Without field employees, office employees may be tasked with picking up additional duties beyond their expertise – further advancing their stress levels and sacrificing quality …

Application Of Mechanical, Electrical, And Plumbing Contractor’S Bim Practices To The Cal Poly San Luis Obispo Construction Management Program, Christopher J. Langstaff

Construction Management

Mechanical, Electrical, and Plumbing (MEP) contractors play such a crucial role in the construction and design phase of building a project; their success or failure can drastically affect the project's overall success. MEP contractors’ use of Building Information Modeling (BIM) in the construction industry has grown exponentially over the past decade. This paper will expand on the utilization and practices of BIM by MEP contractors. This information functions as a foundation for my research into current professional BIM trends as they relate to Cal Poly San Luis Obispo’s (SLO) Construction Management (CM) curriculum. Cal Poly SLO’s CM department has designed …

Additional Business Courses In The Cm Curriculum, Jordan A. Thrailkill

Construction Management

With the growing size of the Construction Industry, an increased knowledge and understanding of the business side of the operation is becoming more important. This study attempts to look at construction management student’s interest in adding more business topic courses into the CM curriculum and if adding more business topic courses will better prepare students for industry. Students were asked to answer six questions -five survey and one free response. These questions were designed to provide quantitative and qualitative data that would allow for an increased understanding of student interest in regards to business.

Conclusion: Results indicated that students would …

Students Perception Of Health And Safety Training Practices In The Construction Industry, Adam Will

Construction Management

Since its inception in 1970, the Occupational Safety and Health Act has steadily decreased the rate in which construction injuries, illnesses, and deaths occur in the industry. The Occupational Safety and Health Administration (OSHA) helps enforce these new standards yet some research suggests that safety performance appears to be a response to safety initiatives beyond compliance. Identifying workers’ perceptions of the training they receive is critical to the design and development of effective workplace safety programs. Utilizing a quantitative survey, data was collected from the Cal Poly Construction Management student body to find out how they were taught jobsite safety …

A Recommendation To Implement A Quality Assurance/Quality Control Topics Course, Jacob W. Stapp

Construction Management

The purpose of this report is to recommend and gauge student interest/need for the addition of a Quality Assurance/Quality Control topics course to the Construction Management curriculum. Both Quality Assurance and Quality Control are vital for all construction projects, and without proper implementation there is no way to ensure high quality results. In an industry that demands high quality projects, it is important that our department prepares our students to be well-rounded in all aspects of construction. This will enable our graduates to enter the workforce in full stride, contributing efficiently from the start. Our University’s motto is “Learn by …

Creating And Implementing An Industry Mentorship Program Within The Women In Construction Club, Linnea Lavorico

Construction Management

The construction industry has made great strides in terms of catching the attention of and accepting more women. The industry has historically been dominated by men and, for the most part, that is still true today. But there are more and more women expressing interest in construction and construction management related career paths. California Polytechnic State University, San Luis Obispo (Cal Poly) continued that trend when the Women in Construction club was formed. The goal is to help women realize that they can participate in the industry and then encourage them to do so. A previous senior project was done …

An Analysis Of The Demand For Interdisciplinary Curriculum Within The Caed, Matthew S. Montijo

Construction Management

This study serves to demonstrate the demand and benefits of interdisciplinary curriculum within the College of Architecture and Environmental Design (CAED) at California Polytechnic State University. While the literature review serves to highlight the unique learning benefits of interdisciplinary coursework, the survey demonstrates student demand for such courses across all colleges in the CAED. This study provides possible solutions to an existing problem within the CAED through the avenue of the construction management department.

Perceptions Of Efficiency In Construction Jobsite Safety, Jay Doyle

Construction Management

This project is to examine the perception of jobsite safety practices of California contractors. Preliminary research found that jobsite safety practices are not a hinderance on a project schedule when managed well. A survey of students and industry professionals was the methodology used to gather this information. This survey consisted of various questions about the perception of safety practices on jobsites the respondent has worked on themselves, as well as their perception about safety in the construction industry as a whole. Significant findings were that half of the surveyed individuals had worked on a job site in which they lost …

California & Foothill Tunnel Feasibility Project:, Tyler J. Rohde

Construction Management

Safety on and off campus while attending college is one of the fastest growing concerns around the country. Having a secure path to get to campus is also a large problem to a select number of students here at California Polytechnic State University. The "Rape" Tunnel at the corner of California and Foothill Boulevard is considered to many to be a danger because of its unpredictable accessibility and the stigma that surrounds it.

Acoustical Damping For Poly Canyon Village's Music Room, Jayvee Martir

Construction Management

Poly Canyon Village was a project by Clark Construction and Architect Niles Bolton Associates that was completed in 2009 that provided housing for upcoming and continuing students. One of the buildings, labeled “Aliso” has constructed the music practice room for students to either play their musical instruments or have it become a convenient area to record, with one particular band “Tin Kitty” having problems with being too loud. Even so, there is potential for this music room to become much more than what it currently is. This paper is a research paper that covers the various materials and methods of …

Analysis Of Student Understanding Of The Change Order Process, Austin C. Eberle

Construction Management

Effective project management comes from controlling cost, time, and quality on a project. As construction projects become more complex, changes in the original contract documents will arise due to the nature of human error. How a project manager documents and addresses change events can alter the successfulness of a project. This study attempts to look at senior level construction management major student’s understanding of the change order management process. The goal of the study is to ascertain how well the students feel the construction management curriculum prepared them to manage change events in industry. Students were asked to demonstrate their …

Bridging The Gap Between Technology Usage In The Construction Industry And In The Classroom, Marco Maffioli

Construction Management

As construction begins to advance more and more every day, technology is one of the most volatile aspects due to its ever changing nature. Technology, and all the software’s that encompass it, is the future of this industry and if we want to keep improving and growing as an industry we need to better align our future new hires with the most prevalent technology and that starts in the classroom. Specifically, the Construction Management Department at Cal Poly, San Luis Obispo, one of the most advanced in Nation, still struggles to align with the expectations and reality of the CM …

Implementing Net Zero Energy Into The Construction Innovations Center, Marlo Arleen Castro

Construction Management

As the environmental status of our planet declines, it is becoming more and more important for the construction industry to adapt. Leadership in Energy and Environmental Design (LEED) is becoming an unspoken requirement for all new and tenant improvement construction, and now, with the goal of Net Zero Energy (NZE) for all new commercial buildings by 2030, NZE is becoming the way of the future. As of late, California Polytechnic State University in San Luis Obispo (Cal Poly) has made grand efforts to retrofit several of the older buildings on its campus in order to achieve LEED certification. One of …

Implementing Occupancy Sensor Lighting Controls In Cal Poly Cic Lab Classrooms, Mitchell Packard

Construction Management

Occupancy sensors are lighting control devices that automatically turn lights on when they detect motion, and off when motion is not detected for an allotted time period. These sensors can be applied virtually anywhere, indoor or outdoor, and can provide substantial energy savings. One application that does not utilize occupancy sensors often enough is classrooms. Cal Poly currently utilizes an outdated toggle switch system that students do not maintain properly, wasting a large quantity of energy. This paper will examine the maintaining of the current lighting control system in Cal Poly’s Construction Innovation Center (CIC) lab classrooms; the operating cost …

Smart Packing With Qr - Improving Cal Poly's Parking System For All Users, Kelsey Bazshushtari, Andrew Lee, Christopher Ragasa

Industrial and Manufacturing Engineering

Cal Poly Smart Parking, herein referred to as CPSP QR Code Initiative, is developed to reduce the wait times student, staff, and guest drivers experience when searching for a parking spot on campus. Cal Poly is currently undergoing a large growth in student population, and, as a result, is experiencing congestion in parking lots. Drivers will commonly spend frustrating amounts of time "vulturing" these parking lots for an open spot. CPSP QR Code Initiative consists of a database that is controlled by user submitted data through QR codes scanned on a user’s smartphone. This system will provide drivers with a …

Development Of A Model And Optimal Control Strategy For The Cal Poly Central Plant And Thermal Energy Storage System, Daniel Douglas Castro

Master's Theses

This thesis develops a calibrated model of the Cal Poly Central Chilled Water Plant with Thermal Energy Storage for use in determining an optimal operating control strategy. The model was developed using a transient systems simulation program (TRNSYS) that includes plant performance and manufacturer data for the primary system components, which are comprised of pumps, chillers, cooling towers, and a thermal energy storage tank. The model is calibrated to the actual measured performance of the plant using the current control strategy as a baseline. By observing and quantifying areas for potential improvement in plant performance under conditions of high campus …

Development Of Tools Needed For Radiation Analysis Of A Cubesat Deployer Using Oltaris, Marycarmen Gonzalez-Dorbecker

Master's Theses

Currently, the CubeSat spacecraft is predominantly used for missions at Low- Earth Orbit (LEO). There are various limitations to expanding past that range, one of the major ones being the lack of sufficient radiation shielding on the Poly-Picosatellite Orbital Deployer (P-POD). The P-POD attaches to a launch vehicle transporting a primary spacecraft and takes the CubeSats out into their orbit. As the demand for interplanetary exploration grows, there is an equal increase in interest in sending CubeSats further out past their current regime. In a collaboration with NASA’s Jet Propulsion Laboratory (JPL), students from the Cal Poly CubeSat program worked …

Comprehensive Fire And Life Safety Analysis Of Building 186, Construction Innovation Center, At California Polytechnic State University, San Luis Obispo, Chris Torres

Fire Protection Engineering: Culminating Experience Project Reports

The report summarizes the analysis of the existing fire protection features and systems installed in the Construction Innovation Center at California Polytechnic State University, San Luis Obispo. The center is divided into three individual buildings (Buildings A, B and C) and are connected at each floor by an exterior balcony. The analysis includes two different approaches. A prescriptive analysis approach has been used to examine if the installed fire protection features and systems compliance with the latest edition of the codes and standards in California. This approach includes an evaluation of the fire structure protection, means of egress, fire alarm …

Cal Poly Dining: The Avenue Redesign, Eric Calbonero, Derek Nollsch, Casey Reilly

Industrial and Manufacturing Engineering

Executive Summary

Campus Dining is planning to close VG’s Cafe during the 2015-2016 school year; as a result, the remaining restaurants on campus need to accommodate the additional student demand. The student team consisting of Eric Calbonero, Derek Nollsch, and Casey Reilly met with Campus Dining’s Director of Operations, Greg Yeo, about this issue—he directed the team toward a redesign of The Avenue Food Court. To redesign The Avenue, the project team focused on several key deliverables as follows:

• Study current customer trends in The Avenue

• Develop a proposed facilities layout and design

• Perform a capacity analysis of The Avenue …

  ---

  Go to article