Engineering Commons^™

Effects Of Seat And Axle Position On Pain, Pathology, And Independence In Pediatric Manual Wheelchair Users With Spinal Cord Injury, Hannah Frank

Theses and Dissertations

Manual wheelchair (MWC) users with spinal cord injury (SCI) rely heavily on their upperextremities to complete daily occupations. Due to repetitive shoulder use during wheelchair mobility and propulsion, MWC users are at greater risk of shoulder pain and shoulder pathology, and thus decreased independence, and lower quality of life. The relative fit of the wheelchair and its parameters are critical and can further impact the user’s propulsion biomechanics. Parameters such as seat angle and axle position may put the user in detrimental shoulder positions for longer periods of time, impacting health outcomes even more. Although the effects of wheelchair setup …

Collision Tracking And Brain Mapping, Carl Russell Iii

The Journal of Purdue Undergraduate Research

No abstract provided.

Creating Reel Designs: Reflecting On Arthrogryposis Multiplex Congenita In The Community, Iris Layadi

Purdue Journal of Service-Learning and International Engagement

Because of its extreme rarity, the genetic disease arthrogryposis multiplex congenita (AMC) and the needs of individuals with the diagnosis are often overlooked. AMC refers to the development of nonprogressive contractures in disparate areas of the body and is characterized by decreased flexibility in joints, muscle atrophy, and developmental delays. Colton Darst, a seven-year-old boy from Indianapolis, Indiana, was born with the disorder, and since then, he has undergone numerous surgical interventions and continues to receive orthopedic therapy to reduce his physical limitations. His parents, Michael and Amber Darst, have hopes for him to regain his limbic motion and are …

Visuomotor Adaptation During Asymmetric Walking, Charles Napoli

Masters Theses

Necessary for effective ambulation, head stability affords optimal conditions for the perception of visual information during dynamic tasks. This maintenance of head-in-space equilibrium is achieved, in part, by the attenuation of the high frequency impact shock resulting from ground contact. While a great deal of experimentation has been done on the matter during steady state locomotion, little is known about how head stability or dynamic visual acuity is maintained during asymmetric walking.

In this study, fifteen participants were instructed to walk on a split-belt treadmill for ten minutes while verbally reporting the orientation of a randomized Landolt-C optotype that was …

Building A Biomechanical Model Of A Rat Forelimb, Joshua Nathaniel Eric Mak

Dissertations and Theses

This paper presents a biomechanical model of the rat forelimb to test theories of determining viscoelastic muscle parameters. Several biomechanical models of rat hindlimbs have been developed and have explored the effects of multi-muscle control during locomotion. The forelimb model uses two ball-and-socket joints to model clavicle and scapula movement. A third ball-and-socket joint is used at the shoulder and two hinge joints are used at the elbow and wrist. Scapula motion is further constrained by muscle and spring elements. Each forelimb has 11 degrees of freedom, and 23 Hill-type muscles. The model has been created in Animatlab, which includes …

Delivery Optimization And Evaluation Of Biomechanics Of An Injectable Nucleus Pulposus Replacement Device, Zachary Rustin Brown

Theses and Dissertations

Lower back pain effects up to 80% of people at some point in their life, a majority of cases being the result of degenerative disc disease. Treatment options for degenerative disc disease are limited, jumping from physical therapy to major spinal fusion and total disc replacement surgery with little to no approaches in between. Furthermore, surgical treatments have not shown to be more effective than conservative treatments and reducing pain and disability over the long term. Hydrogels have shown promise as a potential nucleus pulposus replacement device. Their properties are controllable and can be implanted into the body through minimally …

Use Of Pressure-Measuring Insoles To Characterize Gait Parameters In Simulated Reduced-Gravity Conditions, Christian Ison, Connor Neilsen, Jessica Deberardinis, Mohamed B. Trabia, Janet S. Dufek

Mechanical Engineering Faculty Research

Prior researchers have observed the effect of simulated reduced-gravity exercise. However, the extent to which lower-body positive-pressure treadmill (LBPPT) walking alters kinematic gait characteristics is not well understood. The purpose of the study was to investigate the effect of LBPPT walking on selected gait parameters in simulated reduced-gravity conditions. Twenty-nine college-aged volunteers participated in this cross-sectional study. Participants wore pressure-measuring insoles (Medilogic GmBH, Schönefeld, Germany) and completed three 3.5-min walking trials on the LBPPT (AlterG, Inc., Fremont, CA, USA) at 100% (normal gravity) as well as reduced-gravity conditions of 40% and 20% body weight (BW). The resulting insole data were …

Musculoskeletal Adaptation Of Young And Older Adults In Response To Environmental, Physical, And Cognitive Conditions, Amy E. Holcomb

Boise State University Theses and Dissertations

Accidental falls present a large functional and financial burden among people aged 65 years and older. Falls, injuries associated with falls, and the fear of falling decrease quality of life, physical function, and independence for older adults. To prevent falls, improve stability, and protect joints from damage or injury, the typical response to "challenging" conditions include cautious gait, increase muscle co-contraction, and decreased range of motion. These compensatory strategies are more pronounced in the older adult population with apprehensive "cautious" gait at slower speeds, decreased knee flexion, and increased muscle activation around the knee and ankle. The underlying mechanisms and …

Developing Multi-Species Brain-Strain-Based Scaling Law Using Finite Element Analysis., Xingyu Liu

Electronic Thesis and Dissertation Repository

To better understand traumatic brain injury (TBI), various laboratory animal experiments have been developed. However, there lacks an effective scaling to connect animal TBI models with human brain injuries. With the help of the finite element (FE) model, brain mechanical responses such as strains can be predicted, and hence can serve as a parameter to facilitate animal to human scaling, as these tissue-level strains directly link to neuronal damage. In this thesis, first, a comprehensive comparison of brain strains between animal TBI models and human TBI cases was conducted. Then, a brain-strain-based scaling law between mouse and human was developed, …

Failure Analysis Of The Ulnar Collateral Ligament For Youth Baseball Pitchers, Carlos Soto

Master's Theses

The objectives of this study were to (1) use kinetics from motion analysis and inverse dynamics to calculate the stress experienced by the ulnar collateral ligament (UCL) during a typical pitch cycle, (2) compare calculated maximum UCL pitching stresses to failure properties, and (3) investigate correlations between UCL stress with anthropometric and pitching biomechanical parameters. Prior motion analysis experiments of eighteen 10- to 11- year-old baseball pitchers throwing 10 fastballs were analyzed. Maximum internal elbow varus torques were calculated using inverse dynamics methods during a typical pitch cycle. Calculations used axial loading stress equations and maximum internal elbow varus torques …

Subject-Specific Musculoskeletal Modeling Of Hip Dysplasia Biomechanics, Ke Song

McKelvey School of Engineering Theses & Dissertations

Developmental dysplasia of the hip (DDH) is characterized by abnormal bony anatomy, causes pain and functional limitations, and is a prominent risk factor for premature hip osteoarthritis. Although the pathology of DDH is believed to be mechanically-induced, little is known about how DDH anatomy alters hip biomechanics during activities of daily living, partly due to the difficulties with measuring hip muscle and joint forces. Musculoskeletal models (MSMs) are useful for dynamic simulations of joint mechanics, but the reliability of MSMs for DDH research is limited by an accurate model representation of the unique hip anatomy. To address such challenges, this …

Development Of A Solidworks Simulation Toolkit For A Sophomore Level Biomedical Engineering Course, Jordan Crosby

Biomedical Engineering Undergraduate Honors Theses

In the engineering industry, computer-aided design (CAD) programs are used to create models and create virtual experiments or studies that allow engineers to observe the real behavior of parts or assemblies under certain conditions. Companies hire students with experience in CAD, as professionals believe that CAD experience is beneficial [1,2]. SolidWorks is among the most popular CAD software used by engineers. SolidWorks has multiple functionalities that also allow for finite element analysis dependent on the license. Users can create simulation studies in SolidWorks Simulation that can be used as an accurate approximation for real results.

The goal of this study …

Biomechanical Characterization Of Video-Recorded Short-Distance Falls Involving Children Equipped With A Biometric Device In A Childcare Setting: A Pilot Study., Danielle K. Cory

Electronic Theses and Dissertations

Background: A fall is the most common falsely reported injury scenario when a young child presents for medical care and the caregiver is concealing abuse. There is a lack of reliably witnessed falls with known outcomes to aid in the distinction between accidental and abusive injuries.

Objectives: The objectives of this study were to characterize video-recorded short distance falls involving young children in a childcare setting, to identify body regions most commonly impacted in these short distance falls, to characterize the head biomechanics of these falls, and describe fall characteristics. Additionally, physics-based models were used to predict fall biomechanics in …

Drive Leg And Stride Leg Ground Reaction Forces Relationship To Medial Elbow Stress And Velocity In Collegiate Baseball Pitchers, Brett Smith

Biomedical Engineering Theses & Dissertations

This study examines several different kinetic variables in relation to pitch velocity and elbow varus torque in collegiate baseball pitchers using force plates, an inertial measurement unit, and a radar unit. The purpose of this study is to investigate the kinetic variables being measured and their relationship to pitch velocity and loads being placed on the medial elbow. Twelve collegiate baseball pitchers participated in this study, which was approved by the IRB. Impulse of the drive leg in the anterior-posterior direction, stride leg peak force in the anterior-posterior (AP) direction, elbow varus torque, and pitch velocity were all measured. Two …

Cyclic Damage Accumulation In The Femoral Constructs Made With Cephalomedullary Nails, Farah Hamandi, Alyssa Whitney, Mark H. Stouffer, Michael J. Prayson, Jorn Rittweger, Tarun Goswami

Biomedical, Industrial & Human Factors Engineering Faculty Publications

Background: The purpose of this study was to evaluate the risk of peri-prosthetic fracture of constructs made with cephalomedullary (CM) long and short nails. The nails were made with titanium alloy (Ti-6Al-4V) and stainless steel (SS 316L). Methods: Biomechanical evaluation of CM nail constructs was carried out with regard to post-primary healing to determine the risk of peri-implant/peri-prosthetic fractures. Therefore, this research comprised of, non-fractured, twenty-eight pairs of cadaveric femora that were randomized and implanted with four types of fixation CM nails resulting in four groups. These constructs were cyclically tested in bi-axial mode for up to 30,000 cycles. All …

In Vitro Analyses Of The Contributions Of The Hip Capsule To Joint Biomechanics, Emma Donnelly

Electronic Thesis and Dissertation Repository

Optimal management of the hip capsule during arthroscopic surgery has not been established. The impact of incisions made to the capsule during minimally invasive procedures on joint biomechanics, and whether repair provides any benefit, continue to be debated. The effectiveness of capsular repair to restore native kinematics may be insufficient. Therefore, a better understanding of joint behavior during various capsule conditions is needed. A new robotic system was used to analyze the effect of progressive capsulotomy incision and repairs on the behavior of a normal hip within range of motion (ROM) limits with respect to the intact joint. Complete repairs …

Etherapy: The Next Generation Of Physical And Occupational Therapy, Colin Elliott

Summer Scholarship, Creative Arts and Research Projects (SCARP)

The purpose of the research is to create software capable of revolutionizing the way physical and occupational therapy is done by utilizing wireless inertia sensors. The inertia sensors themselves can accurately identify their exact position in space. Hence, when they are attached correctly to a patient requiring therapy, they can provide precise data on the patient’s real-time motions. It is the goal of the software to leverage the power of the sensors to provide real-time feedback to the patient and to the therapist to ensure patients are performing prescribed exercises correctly and are restoring their range(s) of motion. For ease …

Broadening The Capability Of Kinetics Analysis In Biomechanics, Nicholas Nelson

Electronic Theses and Dissertations

Two studies are discussed in this manuscript each preceded by a literature review of the topic. The first review and study explore agility movements and the effect that alternative upper designs in shoes might have on ground reaction force measures of performance. The second review and study evaluate methods of predicting ground reaction forces without the use of a force platform. A method of using effective forces and ways of improving its accuracy are evaluated in depth.

Dislocation Mechanics Of Total Hip Arthroplasty: A Combined Experimental And Computational Analysis, Michael Scinto

Electronic Theses and Dissertations

While total hip arthroplasty is considered a successful procedure, dislocation remains a serious complication as recurrent dislocations may require additional surgeries. Knowledge on dislocation events as they occur in vivo are limited, therefore researchers rely on experimental and computational methods. A custom MATLAB script and an experimental procedure utilizing a six-degree of freedom actuator were developed to further understand how various surgical considerations affect dislocation mechanics in total hip arthroplasty. Computationally, it was determined that impingement free range of motion is limited during internal rotation in flexion and during external rotation in extension. Experimentally, our results suggest that the posterior …

Feasibility Study To Measure The Impact Of A Specialized Core Exercise On Metabolic Efficiency And Stability During Walking For Above Knee Amputees, Shaye M. Tiell, Sabrina R. Segretario, Serena M. Myers, Emily G. Tully

Williams Honors College, Honors Research Projects

The objective of this study is to determine the feasibility of improving the gait of above-knee (AK) amputees by performing daily core exercises aimed to provide an efficient and stable walking pattern. The goal of the exercise is to strengthen core muscles and form temporary neural connections in the brain aimed at improving metabolic efficiency and stability. We will be implementing the Wright Balance Core 360 Exercise Technique for completion by our subjects. Motion capture technology will be utilized in conjunction with a metabolic oxygen consumption analyzer to collect stability and metabolic efficiency data while amputees walk on a treadmill. …

Biomechanically Inspired Assistive Technology To Restore Movement Of The Upper Limbs After Stroke, Ariel Thomas

Graduate Theses, Dissertations, and Problem Reports

A stroke often damages the neural structures responsible for movement. Stroke is a heterogeneous disease, affecting each survivor differently. There are common motor features of a stroke, but even these features vary across time as an individual proceeds through different stages of recovery. The different ways in which stroke motor impairment can present itself are often overlooked, but these differences are fundamental to the understanding of the disease and its recovery. When motor assessments are capable of acquiring information necessary to parse out a detailed profile of each stroke case, this will lead to an improved neuromechanical understanding of the …

Alterations In Cardiac Motions Of The Failing Heart During Direct Mechanical Ventricular Actuation, Benjamin Allyn Schmitt

Browse all Theses and Dissertations

Objectives: Heart failure (HF) refractory to medical management can be effectively treated with mechanical support. However, available devices are frequently associated with complications due to blood contact. Direct cardiac compression (DCC) devices augment LV systolic pump function by externally compressing the heart surface. Direct Mechanical Ventricular Actuation (DMVA) is a unique DCC method providing not only systolic but, importantly, diastolic support. However, DCC in general remains a relatively poorly understood modality. The purpose of this study was to examine DMVA’s effect on restoration of physiologic function in the failing heart. Methods: Global ischemic HF was induced with 5 mins of …

Dynamic Biomechanical Characteristics Of The Optic Nerve Head By Oct Imaging, Jihee Kim

All ETDs from UAB

Approximately 80 million people in the world were estimated to suffer from glaucoma in 2020. To date, lowering intraocular pressure (IOP) is the only clinical treatment to delay or prevent the development and progression of glaucomatous vision loss. However, many glaucoma patients have IOP in the normal range, while some people with abnormally high pressure do not develop neuropathy. This indicates that biomechanical responses of the optic nerve head (ONH) to changes in IOP can vary significantly among individuals. This study investigated acute IOP-induced compliance in the ONH via SDOCT imaging, using computer vision, and deep learning networks to improve …