Engineering Commons^™

Architecture As A Carbon-Based Practice, Qixin Yu

Masters Theses

Carbon serves as both a silent protagonist and a looming antagonist in the narrative of architecture, shaping not only the physical structures we inhabit but also the ecological legacy we leave behind.

Centuries of human exploitation of the environment have led to climate and material crises. Shifting this dynamic requires action at micro (matter), meso (material), and macro (materiality) levels. Biogenic materials offer significant potential for carbon sequestration and present opportunities for the building industry to collaborate with nature rather than merely extract from it.

This thesis establishes a research and manufacturing practice that prioritizes material innovation, carbon sequestration, environmental …

Tin-Silver As A Novel Biodegradable Metallic Biomaterial, Charley Goodwin

All Dissertations

The Essure device is a non-hormonal, minimally-invasive, permanent female sterilization implant, removed from the market due to an increase in adverse events, hypothesized to be caused by corrosion of the Sn-Ag component of the implant. The goals of this dissertation were to first develop implant retrieval methods for Essure devices and surrounding tissue, documenting signs of degradation and metallic degradation products, then to characterize the electrochemical behavior of Sn-Ag in biologically representative environments and finally, to assess the biological interaction of Sn-Ag. Retrieval analyses developed successful methods, qualifying the degree of corrosion, primarily of the Sn-Ag component and finding Sn …

Nanocellulose Based Foams For Low-Cost Disposable Medical Applications, Dominic Kugell

Electronic Theses and Dissertations

Polyurethane foams have been a staple material for their use in medical positioners, such as post-surgery elevation pillows as well as specific tailored positioners for their use during surgery. Polyurethane foams are preferred because of their lower cost compared to other petroleum derived foams, their versatility, and suitable mechanical properties. However, the environmental impact, including both cost and perception, of these foams is immense. Therefore, alternatives are being explored with biopolymers emerging as a promising class of materials. Cellulose is one such polymer that has recently demonstrated desirable properties. In this study, cellulose nanofibrils (CNF), a household foaming agent, and …

Pcl And Dmso2 Composites For Bio-Scaffold Materials, Jae-Won Jang, Kyung-Eun Min, Cheolhee Kim, Chien Wern, Sung Yi

Mechanical and Materials Engineering Faculty Publications and Presentations

Polycaprolactone (PCL) has been one of the most popular biomaterials in tissue engineering due to its relatively low melting temperature, excellent thermal stability, and cost-effectiveness. However, its low cell attraction, low elastic modulus, and long-term degradation time have limited its application in a wide range of scaffold studies. Dimethyl sulfone (DMSO2) is a stable and non-hazardous organosulfur compound with low viscosity and high surface tension. PCL and DMSO2 composites may overcome the limitations of PCL as a biomaterial and tailor the properties of biocomposites. In this study, PCL and DMSO2 composites were investigated as a new bio-scaffold material to increase …

Investigation Of Fish Gelatin/Polycaprolactone Nanofibrous Materials Alternating Field Electrospinning Fabrication And Characterization, Hannah A. Lacy

All ETDs from UAB

As human needs and purposes continue to evolve, it has become crucial that the materials with which we address these new applications and challenges evolve in stride. Specifically, the medical field’s need for advanced materials has led to the drive for biomaterial synthesis and processing methods which produce adaptable material characteristics to satisfy application specific needs. Research response has been to expand viable natural/ synthetic biomaterial resources, design innovative nanofiber fabrication techniques with high levels of productivity, ease of access, and cost efficiency, and explore crosslinking and surface treatments/modifications to enhance material characteristics for improved performance. This research employs select …

The Effect Of Green Biobased Binder On Structural, Mechanical, Liquid Absorption And Wetting Properties Of Coated Papers, Bilge N. Altay, Charles Klass, Ting Chen, Alexandar Fleck, Cem Aydemir, Arif Karademir, Paul D. Fleming

Articles

Synthetic styrene-butadiene (SB) and styrene-acrylic (SA) latex binders used in paper coating formulations are common and based on unsustainable petroleum sources. Today's papermaking industry turns towards sustainable substitutes that do not compromise quality, and reduce carbon emission, toxic substance release and waste disposal concerns related to fossil fuel sources. In this study, colloidal starch-based latex nanoparticles that do not require cooking were used for pigment coating and coated on the paper surfaces. The effects of these new biobased binders on the structural and mechanical strength properties, liquid absorption, wetting and surface topography of the paper were investigated and compared with …

Peptoid-Based Microsphere Coatings For Biomaterial Applications, Jesse Leland Roberts

Graduate Theses and Dissertations

Peptoids are peptidomimetic oligomers that predominantly harness similarities to peptides for biomimetic functionality. The incorporation of chiral, aromatic side chains in the peptoid sequence allows for the formation of distinct secondary structures and self-assembly into supramolecular assemblies, including microspheres. Peptoid microspheres can be coated onto substrates for potential use in biosensor technologies, tissue engineering platforms, and drug-delivery systems. They have the potential for use in biomedical applications due to their resistance to proteolytic degradation and low immunogenicity. This dissertation focuses on the physical characteristics and robustness of the peptoid microsphere coatings in various physiological conditions, along with their ability to …

Surface Functionalization Of Biomedical Ti-6al-7nb Alloy By Liquid Metal Dealloying, Ilya Vladimirovich Okulov, Soo Hyun Joo, Artem Vladimirovich Okulov, Alexey Sergeevich Volegov, Bérengère Luthringer, Regine Willumeit-Römer, Lai-Chang Zhang, Lutz Mädler, Jürgen Eckert, Hidemi Kato

Research outputs 2014 to 2021

© 2020 by the authors. Licensee MDPI, Basel, Switzerland. Surface functionalization is an effective approach to change the surface properties of a material to achieve a specific goal such as improving the biocompatibility of the material. Here, the surface of the commercial biomedical Ti-6Al-7Nb alloy was functionalized through synthesizing of a porous surface layer by liquid metal dealloying (LMD). During LMD, the Ti-6Al-7Nb alloy is immersed in liquid magnesium (Mg) and both materials react with each other. Particularly, aluminum (Al) is selectively dissolved from the Ti-6Al-7Nb alloy into liquid Mg while titanium (Ti) and niobium (Nb) diffuse along the metal/liquid …

Novel Shape Memory And Multi-Shape Memory Polymers For Biomaterial Applications, Shelby Lois Buffington

Dissertations - ALL

Biomaterial platforms have been used to probe how cells respond to chemical, topographical or mechanical changes in their environments. However, these traditionally static biomaterial platforms have not enabled the study of how cells respond to dynamic changes in their environment. Driven by a need to better understand cell behavior and its role it disease, development and tissue regeneration recent efforts have focused on designing dynamic biomaterial platforms to better mimic a cell’s natural environment. In this work, advanced shape memory polymers (SMPs) that respond to non-thermal triggers and multi-shape memory materials capable of multiple topographical transitions were developed for advanced …

Scaffold Design Considerations For Soft Tissue Regeneration, Madeleine M. Di Gregorio

Electronic Thesis and Dissertation Repository

Tissue engineering has emerged as a promising strategy for the replacement of degenerating or damaged tissues in vivo. Also known as regenerative medicine, integral to this therapeutic strategy is biomimetic scaffolds and the biomaterial structural components used to form them. In this study, three different biomaterial scaffolds for tissue engineering applications were fabricated: three-dimensional reverse embedded collagen scaffolds, polymer fusion printed polycaprolactone (PCL) scaffolds, and electrospun gelatin scaffolds. Three-dimensional collagen and PCL scaffolds promoted human adipose-derived stem/stromal cell (ASC) spreading, proliferation, and fibronectin deposition in vitro. Secondly, this study investigated the efficacy of exogenous galectin-3 delivery as a …

Development Of Functional Biomaterials Using Protein Building Blocks, Li-Sheng Wang

Doctoral Dissertations

Proteins have intrinsic molecular properties that are highly useful for materials applications, especially for biomaterials. My research has focused on translating these molecular properties to materials surface behavior. In one approach, I developed a fluorous-based thermal treatment strategy to generate stable thin films from a variety of naturally abundant proteins. The different surface properties generated from the choice of protein were utilized to modulate cell-surface interactions, prevent bacterial adhesions, and control drug loading/release. I have used nanoimprint lithography to generate patterned protein films for cell alignment. Coupling with inkjet printing deposition, I have fabricated mixed protein films with spatial and …

Engineering The Alveolar Gas Exchange Barrier With Extracellular Matrix Coatings For Bioengineered Lungs, Bethany M. Young

Theses and Dissertations

Lower respiratory diseases are currently the third leading cause of death worldwide. For many end-stage patients with these diseases, there is no cure and a shortage of donor organs available for transplant. A promising solution is to design regenerative scaffolds or complete bioengineered lungs, using decellularized lung tissues as a template for regeneration. Recent advances in the field have made significant strides towards developing a transplantable lung. However, the current technology has not produced a functional lung for in vivo transplant due to immature gas exchange barriers. The mechanisms driving alveolar barrier maturation and role that extracellular matrix (ECM) plays …

Engineering Hyaluronic Acid Carbon Nanotube Nanofibers: A Peripheral Nerve Interface To Electrically Stimulate Regeneration, Elisabeth M. Steel

Wayne State University Dissertations

Peripheral nerve injuries annually affect hundreds of thousands of people globally. Current treatments like the gold standard autograft and commercially available nerve guide conduits (NGC) are insufficient to repair long gap peripheral nerve injuries. NGCs can aid recovery but lack key microenvironment cues that promote nerve regeneration. We hypothesized that providing topographical, mechanical, and electrical guidance cues through a nanofibrous composite biopolymer would result in improved neuron growth metrics using an in vitro model. We embedded hydrophilic carbon nanotubes (CNT) within hyaluronic acid (HA) nanofibers by electrospinning. The aims of this study were (1) to define the topographical, nanomechanical, and …

Development Of Entubulation Strategies For Treating Central Nervous System Injuries, Ivy Brosch

Williams Honors College, Honors Research Projects

According to the McKnight Brain Institute, at least 10,000 people annually in the USA suffer from a central nervous system (CNS) injury. These injuries can cause serve disabilities including paralysis. Due to the complexity of the spinal cord, it is common that potential CNS treatments are first applied to an optic nerve crush (ONC) model in rats. Two proposed treatments were employed; one where nerve growth factor (NGF) was immobilized to a chitosan substrate to stimulate axonal regeneration, and the other using pentadecafluorooctanoyl chloride modified methacrylamide chitosan (MAC(Ali15)F) hydrogel to enhance local oxygenation. The two different treatments were formed into …

Computational Sensitivity Investigation Of Hydrogel Injection Characteristics For Myocardial Support, Hua Wang, Christopher B. Rodell, Madonna E. Lee, Neville N. Dusaj, Joseph H. Gorman Iii, Jason A. Burdick, Robert C. Gorman, Jonathan F. Wenk

Mechanical Engineering Faculty Publications

Biomaterial injection is a potential new therapy for augmenting ventricular mechanics after myocardial infarction (MI). Recent in vivo studies have demonstrated that hydrogel injections can mitigate the adverse remodeling due to MI. More importantly, the material properties of these injections influence the efficacy of the therapy. The goal of the current study is to explore the interrelated effects of injection stiffness and injection volume on diastolic ventricular wall stress and thickness. To achieve this, finite element models were constructed with different hydrogel injection volumes (150 µL and 300 µL), where the modulus was assessed over a range of 0.1 kPa …

Microfabrication For Polymer-Mems Micropumps: A Review, Kehang Cui

Manipal Journal of Science and Technology

The recent development of micropump with application in Biology and Chemistry is reviewed in this article. Instead of classifying micropump by actuation scheme, the biocompatibility and microfabrication issues for micropump are given special significance and used as new criteria for micro pump categorization. Among Polymer-based materials, Polydimethylsiloxane (PDMS) and Polymethylmethacrylate (PMMA) are the prevailing ones, are surveyed with reference to their biocompatibility and microfabrication technique, and followed by newly reported micropump respectively. Although new biocompatible material and its fabrication technique have brought substantial breakthroughs in micropump, they remain at the forefront and fertile research area in the future.

Synthesis And Applications Of Non-Migratory Metal Chelating Active Packaging, Maxine J. Roman

Doctoral Dissertations

Many packaged foods use synthetic chelators (e.g. ethylenediaminetetraacetic acid, EDTA) to inhibit metal promoted oxidation and/or microbial growth that may cause food spoilage. Consumer demand for foods without synthetic additives has prompted growing interest in alternative preservation methods. Our research group has previously developed non-migratory metal chelating active packaging materials by surface immobilization of polymeric chelators and demonstrated their ability to inhibit lipid oxidation in model food emulsions. The work presented in this dissertation investigates the synthesis, performance stability, and practical application of metal chelating surface modifications to optimize design of non-migratory metal chelating active packaging materials. Metal chelating active …

Characterization Of A Multi-Laminate Angle-Ply Af Patch For Annulus Fibrosus Repair, Ryan Borem

All Theses

Annually, over 5.7 million Americans are diagnosed with two IVD-associated pathologies: IVD herniation (IVDH- a mechanical disruption of the concentric fibrous layers of the annulus fibrosus (AF))) and degeneration (IVDD- a multifactorial process which initiates within the inner gelatinous core (NP), and results in a biochemical degradation of NP tissue), with over 2.7 million requiring surgical inteventions.1,2 Although both underlying pathologies are different, quite often they both lead to a decrease in IVD height, impaired mechanical function, and increased pain and disability. These pain symptoms affect approximately 80% of the adult population during their lifetime with estimated expenditures exceeding $85.9 …

Removing Endotoxin From Metallic Biomaterials With Compressed Carbon Dioxide-Based Mixtures, Pedro Tarafa, Eve Williams, Samir Panvelker, Jian Zhang, Michael Matthews

Michael A. Matthews

No abstract provided.

Spider Silk As A Novel High Performance Biomimetic Muscle Driven By Humidity, Ingi Agnarsson, Ali Dhinojwala, Vasav Sahni, Todd Blackledge

Ali Dhinojwala

The abrupt halt of a bumble bee's flight when it impacts the almost invisible threads of an orb web provides an elegant example of the amazing strength and toughness of spider silk. Spiders depend upon these properties for survival, yet the impressive performance of silk is not limited solely to tensile mechanics. Here, we show that silk also exhibits powerful cyclic contractions, allowing it to act as a high performance mimic of biological muscles. These contractions are actuated by changes in humidity alone and repeatedly generate work 50 times greater than the equivalent mass of human muscle. Although we demonstrate …

Characterizing The Reproducibility Of The Properties Of Electrospun Poly(D, L-Lactide-Co-Glycolide) Scaffolds For Tissue-Engineered Blood Vessel Mimics, Toni M. Pipes

Master's Theses

“Blood vessel mimics” (BVMs) are tissue-engineered constructs that serve as in vitro preclinical testing models for intravascular devices. The Cal Poly Tissue Engineering lab specifically uses BVMs to test the cellular response to stent implantation. PLGA scaffolds are electrospun in-house using the current “Standard Protocol” and used as the framework for these constructs. The performance of BVMs greatly depends on material and mechanical properties of the scaffolds. It is desirable to create BVMs with reproducible properties so that they can be consistent models that ultimately generate more reliable results for intravascular device testing. Reproducibility stems from the consistency of the …

Engineering Bacterial Cellulose Scaffold And Its Biomimetic Composites For Bone And Cartilage Tissue Regeneration, Pelagie Marlene Favi

Doctoral Dissertations

A very promising approach to quickly and safely restore normal function to extensively damages and diseases bone and cartilage tissues is the regeneration of these injured tissues using an engineered support scaffold. This dissertation research focuses on the development and evaluation of native bacterial cellulose (BC) and chemically modified BCs as potential biomaterials for bone and cartilage regeneration using equine-derived bone marrow mesenchymal stem cells (EqMSCs).

The ability of native BC scaffold to maintain cell proliferation, viability, and in vitro differentiation of the seeded EqMSCs for application in bone and cartilage tissue engineering was studied. BC morphology was characterized using …

Synergistic Toughening Of Hard, Nacre-Mimetic Mosi2 Coatings By Self-Assembled Hierarchical Structure, Jiang Xu, Xiaoli Zhao, Paul Munroe, Zonghan Xie

Research outputs 2014 to 2021

Like many other intermetallic materials, MoSi2 coatings are typically hard, but prone to catastrophic failure due to their low toughness at ambient temperature. In this paper, a self-assembled hierarchical structure that closely resembles that of nacre (i.e., mother of pearl) was developed in a MoSi2 -based coating through a simple, yet cost-effective, depostion technique. The newly formed coating is tough and can withstand multiple indentations at high loads. Key design features responsible for this remarkable outcome were identified. They include a functionally graded multilayer featuring elastic modulus oscillation, varying sublayer thickness and a columnar structure that are able to attenuate …

Sol-Gel Derived Biodegradable And Bioactive Organic-Inorganic Hybrid Biomaterials For Bone Tissue Engineering, Bedilu A. Allo

Electronic Thesis and Dissertation Repository

Treatments of bone injuries and defects have been largely centered on replacing the lost bone with tissues of allogeneic or xenogeneic sources as well as synthetic bone substitutes, which in all lead to limited degree of structural and functional recovery. As a result, tissue engineering has emerged as a viable technology to regenerate the structures and therefore recover the functions of bone tissue rather than replacement alone. Hence, the current strategies of bone tissue engineering and regeneration rely on bioactive scaffolds to mimic the natural extracellular matrix (ECM) as templates onto which cells attach, multiply, migrate and function.

In this …

Materials For Diabetes Therapeutics, Kaitlin M. Bratlie, Roger L. York, Michael A. Invernale, Robert Langer, Daniel G. Anderson

Kaitlin M. Bratlie

This review is focused on the materials and methods used to fabricate closedloop systems for type 1 diabetes therapy. Herein, we give a brief overview of current methods used for patient care and discuss two types of possible treatments and the materials used for these therapies-(i) artificial pancreases, comprised of insulin producing cells embedded in a polymeric biomaterial, and (ii) totally synthetic pancreases formulated by integrating continuous glucose monitors with controlled insulin release through degradable polymers and glucose-responsive polymer systems. Both the artificial and the completely synthetic pancreas have two major design requirements: the device must be both biocompatible and …

Protein Based Biomimetic Approachs To Surface Hemocompatibility And Biocompatibility Enhancement, Matthew Thomas Dickerson

Theses and Dissertations--Chemical and Materials Engineering

T. pallidum can survive a primary immune response and continue growing in the host for an extended period of time. T. pallidum is thought to bind serum fibronectin (FN) through Tp0483 on the surface to obscure antigens. A Tp0483 fragment (rTp0483) was adsorbed onto functionalized self-assembled monolayers (SAMs) with FN. FN capture by adsorbed rTp0483 depended greatly on surface chemistry with COO- groups being best for FN binding. Hemocompatibility was determined by analysis of plasma protein adsorption, intrinsic pathway activation, and platelet activation. rTp0483+FN bound an equal or lesser amount of fibrinogen (Fg), human serum albumin (HSA), and factor XII …

Mechanical Analysis Of Bacterial Nanocellulose For Biomedical Applications, Joseph Mathias Schwertz

All ETDs from UAB

Bacterial nanocellulose (BNC) is a biopolymer that has been used in a variety of applications ranging from speaker diaphragms to biomedical products. Created by micro-organisms like Gluconacetobacter xylinus, BNC is composed of long cellulose fibers in a highly crystalline hydrogel. Recent interest in BNC based materials has led to the discov-ery of several cultivation and post-processing treatments that have enabled researchers to control the mechanical and structural properties of the hydrogel. Three BNC treatments were mechanically evaluated through tensile testing. Ten-sile tests were conducted using dogbone shape test strips and a video extensometer. Phys-ical compression of a BNC hydrogels not …

Regulation Of Cell Adhesion Strength By Spatial Organization Of Focal Adhesions, Kranthi Kumar Elineni

USF Tampa Graduate Theses and Dissertations

Cell adhesion to extracellular matrix (ECM) is critical to various cellular processes like cell spreading, migration, growth and apoptosis. At the tissue level, cell adhesion is important in the pathological and physiological processes that regulate the tissue morphogenesis. Cell adhesion to the ECM is primarily mediated by the integrin family of receptors. The receptors that are recruited to the surface are reinforced by structural and signaling proteins at the adhesive sites forming focal adhesions that connect the cytoskeleton to further stabilize the adhesions. The functional roles of these focal adhesions extend beyond stabilizing adhesions and transduce mechanical signals at the …

Study Of Micro Rotary Ultrasonic Machining, Aarati Sarwade

Department of Industrial and Management Systems Engineering: Dissertations, Theses, and Student Research

Product miniaturization for applications in fields such as biotechnology, medical devices, aerospace, optics and communications has made the advancement of micromachining techniques essential. Machining of hard and brittle materials such as ceramics, glass and silicon is a formidable task. Rotary ultrasonic machining (RUM) is capable of machining these materials. RUM is a hybrid machining process which combines the mechanism of material removal of conventional grinding and ultrasonic machining. Downscaling of RUM for micro scale machining is essential to generate miniature features or parts from hard and brittle materials.

The goal of this thesis is to conduct a feasibility study and …

Developing Chitosan-Based Biomaterials For Brain Repair And Neuroprosthetics, Zheng Cao

Masters Theses

Chitosan is widely investigated for biomedical applications due to its excellent properties, such as biocompatibility, biodegradability, bioadhesivity, antibacterial, etc. In the field of neural engineering, it has been extensively studied in forms of film and hydrogel, and has been used as scaffolds for nerve regeneration in the peripheral nervous system and spinal cord. One of the main issues in neural engineering is the incapability of neuron to attach on biomaterials. The present study, from a new aspect, aims to take advantage of the bio-adhesive property of chitosan to develop chitosan-based materials for neural engineering, specifically in the fields of brain …