Engineering Commons^™

Multifunctional Hybrid Mos2-Pegylated/Au Nanostructures With Potential Theranostic Applications In Biomedicine, Thiago R. S. Malagrino, Anna Paula Godoy, Juliano M. Barbosa, Abner G. T. Lima, Nei C. O. Sousa, Jairo J. Pedrotti, Pamela S. Garcia, Roberto M. Paniago, Lídia M. Andrade, Jaime Taha-Tijerina

Informatics and Engineering Systems Faculty Publications and Presentations

In this work, flower-like molybdenum disulfide (MoS2) microspheres were produced with polyethylene glycol (PEG) to form MoS2-PEG. Likewise, gold nanoparticles (AuNPs) were added to form MoS2-PEG/Au to investigate its potential application as a theranostic nanomaterial. These nanomaterials were fully characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), photoelectron X-ray spectroscopy (XPS), Fourier-transformed infrared spectroscopy (FTIR), cyclic voltammetry and impedance spectroscopy. The produced hierarchical MoS2-PEG/Au microstructures showed an average diameter of 400 nm containing distributed gold nanoparticles, with great cellular viability on tumoral and non-tumoral cells. This aspect makes them with multifunctional characteristics with potential application …

Investigation Of Human Adipose-Derived Stem-Cell Behavior Using A Cell-Instructive Polydopamine-Coated Gelatin-Alginate Hydrogel., Settimio Pacelli, Aparna R Chakravarti, Saman Modaresi, Siddharth Subham, Kyley Burkey, Cecilia Kurlbaum, Madeline Fang, Christopher A Neal, Adam J Mellott, Aishik Chakraborty, Arghya Paul

Chemical and Biochemical Engineering Publications

Hydrogels can be fabricated and designed to exert direct control over stem cells' adhesion and differentiation. In this study, we have investigated the use of polydopamine (pDA)-treatment as a binding platform for bioactive compounds to create a versatile gelatin-alginate (Gel-Alg) hydrogel for tissue engineering applications. Precisely, pDA was used to modify the surface properties of the hydrogel and better control the adhesion and osteogenic differentiation of human adipose-derived stem cells (hASCs). pDA enabled the adsorption of different types of bioactive molecules, including a model osteoinductive drug (dexamethasone) as well as a model pro-angiogenic peptide (QK). The pDA treatment efficiently retained …

Development Of Plant Extract-Based Composite Fibers And Aerogels, Raul C. Barbosa

Theses and Dissertations

The aim of this study is to use the solid templating process of pullulan nanofibers in order to produce biocompatible, biodegradable, and antibacterial aerogels. The developed aerogels were produced using cross-linked pullulan nanofibers, which provide a water-stable structure allowing them to be used as wound dressing material. The morphology, thermal properties, water solubility, and thermal and physical properties of the nanofibers and aerogels were characterized. Furthermore, the antibacterial effect against gram-negative bacteria, Escherichia coli, and the biocompatibility using mouse embryonic fibroblasts (NIH 3T3) were investigated.

Cuffed Pediatric Endotracheal Tubes, Jennifer Nutter, Emmanuela Oppong, Colleen Pouliot

Honors Theses

Endotracheal tubes (ET) are used to provide patients with an adequate airway when they are unable to breathe on their own. ET tubes can be used in emergency situations, surgical procedures, and on-floor intubations. The two main types of ET tubes are cuffed and uncuffed. Due to the fragile structure of a child's throat, uncuffed tubes are primarily used in pediatric patients. Uncuffed tubes can slip out of place resulting in air leakage and improper oxygenation. In contrast, cuffed ET tubes provide a proper seal to the airway and prevent against aspiration. The following work proposes an improved design for …

Advanced Manufacturing Of Titanium Alloys For Biomedical Applications, Nicholas C. Mavros

ETD Archive

In metallurgy, Titanium has been a staple for biomedical purposes. Its low toxicity and alloying versatility make it an attractive choice for medical applications. However, studies have shown the difference in elastic modulus between Titanium alloys (116 GPa) and human bone (40-60 GPa) contribute to long term issues with loose hardware fixation. Additionally, long term studies have shown elements such as Vanadium and Aluminum, which are commonly used in Ti-6Al-4V biomedical alloys, have been linked to neurodegenerative diseases like Alzheimers and Parkinsons. Alternative metals known to be less toxic are being explored as replacements for alloying elements in Titanium alloys. …

Biocompatible Bi(Oh)3nanoparticles With Reduced Photocatalytic Activityas Possible Ultraviolet Filter In Sunscreens, Kathrin Bogusz, Dean Cardillo, Moeava Tehei, Tifenn Boutard, Philip J. Barker, Thierry Devers, Anatoly B. Rosenfeld, Shi Xue Dou, Hua-Kun Liu, Konstantin K. Konstantinov

Australian Institute for Innovative Materials - Papers

In this study we investigate readily synthesised Bi(OH)3nanoparticles as a novel, multifunctional ultraviolet filter for sunscreen. The absorbance of Bi(OH)3NPs in the ultraviolet region is comparable to that of both ZnO and TiO2NPs used in commercial sunscreens. In vitro photoprotection results show that the combination of TiO2/Bi(OH)3is more efficient than TiO2/ZnO over the whole UV range, with an increase in sun protection factor of 28%. The emulsions show rheological properties comparable to those of commercial sunscreens. The combination of TiO2/Bi(OH)3led to insignificant damage on pre-painted steel panels after exterior exposure for twelve weeks. We also demonstrate that the addition of …

The Prospects Of Zinc As A Structural Material For Biodegradable Implants—A Review Paper, Galit Katarivas Levy, Jeremy Goldman, Eli Aghion

Michigan Tech Publications

In the last decade, iron and magnesium, both pure and alloyed, have been extensively studied as potential biodegradable metals for medical applications. However, broad experience with these material systems has uncovered critical limitations in terms of their suitability for clinical applications. Recently, zinc and zinc-based alloys have been proposed as new additions to the list of degradable metals and as promising alternatives to magnesium and iron. The main byproduct of zinc metal corrosion, Zn²⁺, is highly regulated within physiological systems and plays a critical role in numerous fundamental cellular processes. Zn²⁺ released from an implant may suppress …

Water Condensation And Protein Adsorption On Hybrid Superhydrophobic-Hydrophilic Surfaces, Bikash Mondal

Dissertations, Theses, and Capstone Projects

This thesis describes the study of protein adsorption and water condensation on hybrid superhydrophobic-hydrophilic surfaces for various technological applications such as diagnostics, artificial organs and medical devices, water collection, and heat transfer.

In the chapter 1, a general introduction to wetting theories, superhydrophobic surface, and hybrid surfaces is given. In chapter 2, design and fabrication of a hybrid superhydrophobic surface for studying dropwise condensation and heat transfer is discussed. Effect of surface chemistry and wettability on protein adsorption is discussed in the chapter 3. Finally, in chapter 4, the protein adsorption study on hybrid superhydrophobic surfaces made by 3D-printing and …

Fabric And Soft Materials Composites For Bio-Inspired Adhesives And Prosthetics, Daniel R. King

Doctoral Dissertations

Adhesives have long been designed around a trade-off between adhesive strength and releasability. Within this spectrum, specialized materials have been designed to maximize adhesive ability for a given application. To overcome this trade-off, a new adhesive paradigm is required. Biologically inspired adhesives have been of interest over the past two decades, because organisms are seen using their adhesive pads to achieve high adhesive forces, while maintaining releasability and reusability. Many biological organisms possess microscopic fibrillar features on their toe-pads, which enables climbing. While much effort has been spent attempting to mimic these features, ultimately high force capacities have not been …

Electroactive Biocompatible Materials For Nerve Cell Stimulation, Mei Yang, Youlong Liang, Qingyuan Gui, Jun Chen, Yong Liu

Australian Institute for Innovative Materials - Papers

In the past decades, great efforts have been developed for neurobiologists and neurologists to restore nervous system functions. Recently much attention has been paid to electrical stimulation (ES) of the nervous system as a potential way to repair it. Various conductive biocompatible materials with good electrical conductivity, biocompatibility, and long-term ES or electrical stability have been developed as the substrates for ES. In this review, we summarized different types of materials developed in the purpose for ES of nervous system, including conducting polymers, carbon nanomaterials and composites from conducting polymer/carbon nanomaterials. The present review will give our perspective on the …

Electrical Stimulation Using Conductive Polymer Polypyrrole Promotes Differentiation Of Human Neural Stem Cells: A Biocompatible Platform For Translational Neural Tissue Engineering, Elise Stewart, Nao R. Kobayashi, Michael J. Higgins, Anita Quigley, Sina S. Jamali, Simon Moulton, Robert M. I Kapsa, Gordon G. Wallace, Jeremy M. Crook

Australian Institute for Innovative Materials - Papers

Conductive polymers (CPs) are organic materials that hold great promise for biomedicine. Potential applications include in vitro or implantable electrodes for excitable cell recording and stimulation, and conductive scaffolds for cell support and tissue engineering. Here we demonstrate the utility of electroactive CP Polypyrrole (PPy) containing the anionic dopant dodecylbenzenesulfonate (DBS) to differentiate novel clinically relevant human neural stem cells (hNSCs). Electrical stimulation of PPy(DBS) induced hNSCs to predominantly β-III Tubulin (Tuj1) expressing neurons, with lower induction of glial fibrillary acidic protein (GFAP) expressing glial cells. In addition, stimulated cultures comprised nodes or clusters of neurons with longer neurites and …

A Bio-Friendly, Green Route To Processable, Biocompatible Graphene/Polymer Composites, Eoin Murray, Sepidar Sayyar, Brianna C. Thompson, Robert A. Gorkin Iii, David L. Officer, Gordon G. Wallace

Australian Institute for Innovative Materials - Papers

Grapene-based polymer composites are a very promising class of compounds for tissue engineering scaffolds. However, in general the methods of synthesis are environmentally hazardous and residual toxic materials can affect the biocompatibility significantly. In this paper a simple, scalable, environmentally-friendly, microwave-assisted synthesis is described that results in conducting graphene/polycaprolactone composites that retain the processability and biocompatibility of the pristine polymer without introducing possibly hazardous reducing agents. Composites of polycaprolactone and graphene oxide were synthesised in a single step by the ring-opening polymerisation of ε-caprolactone in the presence of dispersed graphene oxide nanosheets under microwave irradiation. The graphene oxide provides a …

Wear Resistant And Biocompatible Coatings For Medical Devices And Method Of Fabrication, Mary Gilliam, Susan Farhat, Ali Zand

Chemical Engineering Patents

Abstract: A method of forming a biocompatible or biologically inert article for use in an application in which the article will make contact with at least one tissue, organ, or fluid within a human or animal body is provided. The method generally comprises providing an article having an external sur face; selecting chemical precursors; using a means to direct one or more chemical precursors towards or to apply such chemical precursors to the ex ternal surface; activating the chemical precursors by exposing said precursors to atmospheric pressure plasma; and grafting and/or cross-linking the chem ical precursors to form a solid …

Covalently Linked Biocompatible Graphene/Polycaprolactone Composites For Tissue Engineering, Sepidar Sayyar, Eoin Murray, Brianna C. Thompson, Sanjeev Gambhir, David L. Officer, Gordon G. Wallace

Gordon Wallace

Two synthesis routes to graphene/polycaprolactone composites are introduced and the properties of the resulting composites compared. In the first method, mixtures are produced using solution processing of polycaprolactone and well dispersed, chemically reduced graphene oxide and in the second, an esterification reaction covalently links polycaprolactone chains to free carboxyl groups on the graphene sheets. This is achieved through the use of a stable anhydrous dimethylformamide dispersion of graphene that has been highly chemically reduced resulting in mostly peripheral ester linkages. The resulting covalently linked composites exhibit far better homogeneity and as a result, both Young's modulus and tensile strength more …

Biocompatible Ionic Liquid-Biopolymer Electrolyte Enabled Thin And Compact Magnesium Air Batteries, Xiaoteng Jia, Yang Yang, Caiyun Wang, Chen Zhao, R Vijayaraghavan, Douglas R. Macfarlane, Maria Forsyth, Gordon G. Wallace

Australian Institute for Innovative Materials - Papers

With the surge of interest in miniaturized implanted medical devices (IMDs), implantable power sources with small dimensions and biocompatibility are in high demand. Implanted battery/supercapacitor devices are commonly packaged within a case that occupies a large volume, making miniaturization difficult. In this study, we demonstrate a polymer electrolyte-enabled biocompatible magnesium-air battery device with a total thickness of approximately 300 μm. It consists of a biocompatible polypyrrole-para(toluene sulfonic acid) cathode and a bioresorbable magnesium alloy anode. The biocompatible electrolyte used is made of choline nitrate (ionic liquid) embedded in a biopolymer, chitosan. This polymer electrolyte is mechanically robust and offers a …

Synergistic Toughening Of Hard, Nacre-Mimetic Mosi2 Coatings By Self-Assembled Hierarchical Structure, Jiang Xu, Xiaoli Zhao, Paul Munroe, Zonghan Xie

Research outputs 2014 to 2021

Like many other intermetallic materials, MoSi2 coatings are typically hard, but prone to catastrophic failure due to their low toughness at ambient temperature. In this paper, a self-assembled hierarchical structure that closely resembles that of nacre (i.e., mother of pearl) was developed in a MoSi2 -based coating through a simple, yet cost-effective, depostion technique. The newly formed coating is tough and can withstand multiple indentations at high loads. Key design features responsible for this remarkable outcome were identified. They include a functionally graded multilayer featuring elastic modulus oscillation, varying sublayer thickness and a columnar structure that are able to attenuate …

One-Step Synthesis Of Graphene/Polypyrrole Nanofiber Composites As Cathode Material For A Biocompatible Zinc/Polymer Battery, Sha Li, Kewei Shu, Chen Zhao, Caiyun Wang, Zaiping Guo, Gordon G. Wallace, Hua-Kun Liu

Australian Institute for Innovative Materials - Papers

The significance of developing implantable, biocompatible, miniature power sources operated in a low current range has become manifest in recent years to meet the demands of the fast-growing market for biomedical microdevices. In this work, we focus on developing high-performance cathode material for biocompatible zinc/polymer batteries utilizing biofluids as electrolyte. Conductive polymers and graphene are generally considered to be biocompatible and suitable for bioengineering applications. To harness the high electrical conductivity of graphene and the redox capability of polypyrrole (PPy), a polypyrrole fiber/graphene composite has been synthesized via a simple one-step route. This composite is highly conductive (141 S cm …

Covalently Linked Biocompatible Graphene/Polycaprolactone Composites For Tissue Engineering, Sepidar Sayyar, Eoin Murray, Brianna C. Thompson, Sanjeev Gambhir, David L. Officer, Gordon G. Wallace

Australian Institute for Innovative Materials - Papers

Two synthesis routes to graphene/polycaprolactone composites are introduced and the properties of the resulting composites compared. In the first method, mixtures are produced using solution processing of polycaprolactone and well dispersed, chemically reduced graphene oxide and in the second, an esterification reaction covalently links polycaprolactone chains to free carboxyl groups on the graphene sheets. This is achieved through the use of a stable anhydrous dimethylformamide dispersion of graphene that has been highly chemically reduced resulting in mostly peripheral ester linkages. The resulting covalently linked composites exhibit far better homogeneity and as a result, both Young's modulus and tensile strength more …

Polypyrrole As Cathode Materials For Zn-Polymer Battery With Various Biocompatible Aqueous Electrolytes, Sha Li, Irin Sultana, Zaiping Guo, Caiyun Wang, G G. Wallace, Hua-Kun Liu

Australian Institute for Innovative Materials - Papers

Polypyrrole films doped with p-toluenesulfonic anions on stainless steel mesh substrates were prepared by the electropolymerization method. A Zn/aqueous solution/polymer battery system was thus established with the polymer film as the cathode and three different biocompatible aqueous electrolytes. The mechanism of the anode reaction can be explained as the dissolution of Zn. It was found, however, that the discharge performance, including the discharge plateaus and capacities, were significantly affected by the polymer reactions. To elucidate the reaction mechanisms of the conductive polymer, its electrochemical properties were systematically studied by several techniques, including cyclic voltammetry, electrochemical impedance spectroscopy, and monitoring mass …

Biocompatible Ferroelectric (Na,K)Nbo3 Nanofibers, A Jalalian, A M. Grishin

Faculty of Engineering and Information Sciences - Papers: Part A

"Dense homogeneous textile composed from continuous bead-free sodium potassium niobate (NKN) nanofibers 100 mu m long and 50-200 nm in diameter was sintered by sol-gel calcination assisted electrospinning. High resolution electron microscopy and x-ray diffraction revealed preferential cube-on-cube growth of fibers in [001] direction. Raman spectrum of NKN fibers contains all the features characteristic to electrically poled orthorhombic phase. In contrast to polycrystalline ceramics, it shows relative enhancement of the Raman cross section of isotropic A(1g)(nu(1)) mode compared with polar axis defined F(2g)(nu(5)) and E(g)(nu(2)) vibrations. We interpret this as an evidence for superparaelectric state of NKN nanofibers. Spontaneous polarization …

Characterization Of Biocompatible Parylene-C Coating For Biomems Applications, Quoc Phuc Nguyen

LSU Master's Theses

This thesis characterizes parylene-C films with respect to biological micro-electro-mechanical system (BioMEMS) applications. BioMEMS devices have fueled the growth and research in the area of detecting, analyzing and identifying pathogens rapidly with precision in the bio-medical applications, thereby positively impacting millions of lives and made it extremely popular among researchers. These devices are fabricated using state-of-the-art techniques usually involving more than one material which typically has different biocompatibility and is not acceptable for various BioMEMS and biomedical applications; therefore, a special biocompatible coating is required. The parylene polymer is an example of such a coating as it is known for …

Design And Development Of A Mems-Based Capacitive Bending Strain Sensor And A Biocompatible Housing For A Telemetric Strain Monitoring System., Julia Marie Weyer Aebersold 1969-

Electronic Theses and Dissertations

Lumbar arthrodesis or spinal fusion is usually performed to relieve back pain and regain functionality from ruptured discs, disc degenerative disease, trauma and scoliosis. Metal rods are often fixed to the spine with screws or hooks, while fusion develops on the affected vertebrae. Fusion is determined by visual examination of radiographic images (X-ray), computed tomography (CT) scans or magnetic resonance imaging (MRI), yet these inspection procedures are subjective methods of review. They do not objectively confirm the presence of spinal fusion, which can lead to exploratory surgery to determine if fusion has occurred. Therefore, a need has arisen to develop …