Engineering Commons^™

Effects Of Vapor Grown Carbon Nanofibers On Electrical And Mechanical Properties Of A Thermoplastic Elastomer, Daniel Thomas Basaldua

Theses and Dissertations - UTB/UTPA

Carbon nanofiber (CNF) reinforced composites are exceptional materials that exhibit superior properties compared to conventional composites. This paper presents the development of a vapor grown carbon nanofiber (VGCNF) thermoplastic polyurethane (TPU) composite by a melt mixing process. Dispersion and distribution of CNFs inside the TPU matrix were examined through scanning electron microscopy to determine homogeneity. The composite material underwent durometer, thermal gravimetric analysis, differential scanning calorimetry, heat transfer, hysteresis, dynamic modulus, creep, tensile, abrasion, and electrical conductivity testing to characterize its properties and predict behavior. The motivation for this research is to develop an elastomer pad that is an electrically …

Characterization Of Gan Thin Films Grown By Rf Magnetron Sputtering For Fabrication Of An Algan/Gan Hemt Biosensor, Rocio Yolanda Garza

Theses and Dissertations - UTB/UTPA

Radio-Frequency (RF) Magnetron Sputtering has been used to grow GaN thin films for future fabrication of an AlGaN/GaN HEMT biosensor. A GaN target was sputtered at various parameters on silicon and sapphire substrates, at room temperature and at elevated temperature using substrate heating and post deposition annealing treatment. The research conducted investigates the effects of sputtering gas (Argon or Nitrogen gas), RF power (40W or 50W), and pressure (4mT – 30mT) on the structural properties of the thin films. Imaging tools such as the Atomic Force Microscopy (AFM), Scanning Electron Microscopy (SEM), Energy-dispersive X-ray spectroscopy (EDS), X-ray Diffractometer (XRD), and …

Low Speed Water Tunnel Testing, John J. Taylor

Theses and Dissertations - UTB/UTPA

Water tunnels are ideal for studying flow patterns for hydrodynamic effects. The functionality of the University of Texas-Pan American water tunnel was limited by not being able to measure forces and moments corresponding to flow patterns. This report delivers an experimental set-up for calibrating the velocity of the water and development of a load measuring system to relate simultaneous visual investigation. An in-depth parts breakdown of the SST-model pump and the dye injection system for flow visualization will be reviewed. Few balances have been made for water tunnels due to small and difficult to measure flow-induced forces. The motive is …

Seeds Of Solutions™: An Economical & Efficient Approach Towards Power Engineering Education, Eli Alvarez

Theses and Dissertations - UTB/UTPA

Power demands are set to increase over the next twenty years; however, research shows that there may be a shortage of power engineers due to an appreciable percentage of the current power engineer workforce retiring, insufficient enrollment in power engineering programs and a lack of emphasis in power engineering at the university level. This thesis provides supporting research for future power demands, workforce and faculty shortages. Using temporary research in modern learning / teaching styles, student / teacher perceptions, educational trends and regional course offerings, this thesis describes a learning approach towards power engineering education. Designed specifically for universities with …

A Preventive Maintenance Framework In Dairy Production Operations, Maria F. Vargas

Theses and Dissertations - UTB/UTPA

Dairy operations suffer frequent stops. Product shrinkage is a consequence of downtime, which includes losses of packaging material, scraped finish product and capacity. This work proposes a troubleshooting methodology to identify causes of downtime, estimation of waste cost, and minimization of operation disruptions by applying a combination of a cost function to assess waste, and performance measurements. The drinkable yogurt process is evaluated to find the principal areas for wasted bottles and yogurt. In order to make a decision about which of those sources to address, a General Cost Function is used to estimate waste cost which include measurements that …

Applications Of Magnetostrictive Materials In The Real-Time Monitoring Of Vehicle Suspension Components, Raul Estrada

Theses and Dissertations - UTB/UTPA

The purpose of this project is to explore applications of magnetostrictive materials for real-time monitoring of railroad suspension components, in particular bearings. Monitoring of such components typically requires the tracking of temperature vibration and load. In addition, real-time, long-term monitoring can be greatly facilitated through the use of wireless, self-powered sensors. Magnetostrictive materials, such as Terfenol-D, have the potential to address both requirements. Currently, piezoelectrics are used for many load and energy harvesting applications; however, they are fragile and are difficult to use for static load measurements. Magnetostrictive metals are tougher, and their property of variable permeability when stressed can …

A 129nw Neural Amplifier And Gm-C Filter For Eeg Using Gm/Id Methodology, Samuel A. Gallegos

Theses and Dissertations - UTB/UTPA

This Thesis presents a low-power analog front-end amplifier and Gm-C filter for biomedical sensing applications, specifically for Electroencephalogram (EEG) use. The proposed neural amplifier uses a supply voltage of 1.8V, it has a mid-band gain of 40.75dB, and consumes a total current of 71.82nA, for a total dissipated power of 129.276nW. Also presented is the design of a 3rd order Butterworth Low Pass Gm-C Filter which makes use of 14.7nS transconductors; the proposed filter has a pass band suitable for EEG recording use (1-100Hz). The amplifier and filter utilize current sources without bias resistances which provide 56nA and (1.154nA x …

Modeling Of High Pressure Radial Piston Pumps, Pulkit Agarwal

Open Access Theses

Agarwal, Pulkit. M.S.M.E., Purdue University, December 2014. Modeling of High Pressure Radial Piston Pumps. Major Professor: Andrea Vacca, School of Mechanical Engineering A comprehensive multi-domain simulation tool for investigating the operation of radial piston machines has been developed in the present study. The simulation tool is capable of analyzing the displacing action of the machine parts as well as the power losses occurring in the lubricating interfaces which makes it useful for supporting the design process of radial piston units. The reference machine analyzed in this study is a radial piston pump of rotating cam type design used for high …

Bio-Inspired Robotic Fish With Vision Based Target Tracking, Eric Anderson

Open Access Theses

The lionfish is an invasive species that out-competes and overcrowds native sh species along the eastern seaboard of the United States and down into the Caribbean. Lionfish populations are growing rapidly. Current methods of monitoring lionfish populations are costly and time intensive. A bio-inspired robotic fish was built to use as an autonomous lionfish tracking platform. Lionfish are tracked visually using an onboard processor. Five different computer vision methods for identification and tracking are proposed and discussed. These include: background subtraction, color tracking, mixture of Gaussian background subtraction, speeded up robust feature (SURF), and CamShift based tracking. Each of these …

Dropwise Condensation Dynamics In Humid Air, Julian Eduardo Castillo Chaco

Open Access Theses

Dropwise condensation of atmospheric water vapor is important in multiple practical engineering applications. The roles of environmental factors and surface morphology/chemistry on the condensation dynamics need to be better understood to enable efficient water-harvesting, dehumidication, and other psychrometric processes. Systems and surfaces that promote faster condensation rates and self-shedding of condensate droplets could lead to improved mass transfer rates and higher water yields in harvesting applications. The thesis presents the design and construction of an experimental facility that allows visualization of the condensation process as a function of relative humidity. Dropwise condensation experiments are performed on a vertically oriented, hydrophobic …

Rapid Indirect Trajectory Optimization On Highly Parallel Computing Architectures, Thomas Antony

Open Access Theses

Trajectory optimization is a field which can benefit greatly from the advantages offered by parallel computing. The current state-of-the-art in trajectory optimization focuses on the use of direct optimization methods, such as the pseudo-spectral method. These methods are favored due to their ease of implementation and large convergence regions while indirect methods have largely been ignored in the literature in the past decade except for specific applications in astrodynamics. It has been shown that the shortcomings conventionally associated with indirect methods can be overcome by the use of a continuation method in which complex trajectory solutions are obtained by solving …

A Dynamic Stochastic Model For Converging Inbound Air Traffic, Jun Chen

Open Access Theses

Weather accounts for the majority of congestion in the National Airspace System which highlights the importance of addressing weather uncertainty to mitigate delays, and this paper presents an effort in this direction. Firstly, a new dynamic stochastic 0-1 Integer Programming (IP) model is proposed, which models the Single Airport Ground Holding Problem (SAGHP) with respect to uncertainty in the separation between flights instead of Airport Acceptance Rate (AAR) or landing capacity. Uncertainty in separation according to different weather conditions is represented through the scenario tree by using stochastic linear programming. Considering time separation constraints instead of AAR constraints, our model …

Impact Of License Selection On Open Source Software Quality, Benjamin J. Cotton

Open Access Theses

Open source software plays an important part in the modern world, powering businesses large and small. However, little work has been done to evaluate the quality of open source software. Two different license paradigms exist within the open source world, and this study examines the difference in software quality between them. In this thesis, the author uses technical debt as a measure of software quality. Eighty open source projects (40 from each paradigm) were downloaded from the popular open source hosting website SourceForge. Using complexity, code duplication, comments, and unit test coverage as inputs to the SonarQube technical debt model, …

Wi-Fi Real Time Location Systems, Benjamin A. Doll

Open Access Theses

This thesis objective was to determine the viability of utilizing an untrained Wi-Fi real time location system as a GPS alternative for indoor environments. Background research showed that GPS is rarely able to penetrate buildings to provide reliable location data. The benefit of having location information in a facility and how they might be used for disaster or emergency relief personnel and their resources motivated this research. A building was selected with a well-deployed Wi-Fi infrastructure and its untrained location feature was used to determine the distance between the specified test points and the system identified location. It was found …

Digital Image Correlation Of Heterogeneous Deformations In Polycrystalline Material With Electron Backscatter Diffraction, Javier Esquivel

Open Access Theses

This work establishes the ability to conduct digital image correlation (DIC) investigations at varying length scales. DIC allows for a computational method of strain field measurements using multiple images to track random speckle patterns on material surfaces. The use of a powder silicon oxide speckle allows for high optical magnification correlation using conventional load frames. Self-assembling gold nanoparticles provide sub-micron resolution speckle patterns to study microstructure influences on deformation using scanning electron microscopy. The complex microstructure in aerospace grade aluminum and nickel-based superalloys, give rise to varied deformation fields, which can be studied using electron backscatter diffraction. Specimen preparation techniques, …

Designing A Sustainable And Transferable Inventory Management System For Small Healthcare Facilities, Shree Frazier

Open Access Theses

Managing the costs of supplies within healthcare facilities has been a task that has plagued the health industry for many years. Many facilities are accustomed to using a par system approach. This involves bringing an inventory item to an amount sufficient for daily operation. This method often requires daily inspection by a healthcare worker, which reduces his/her time spent performing value added tasks. Employees at small healthcare facilities have multiple responsibilities, therefore they cannot afford to spend much time on inventory management. A proposed approach is the Kanban method, which allows for strict monitoring of inventory items without the need …

Strategies For The Replacement Of Historic Bridge Guardrails, Adam J. Clauss

Open Access Theses

Bridges that are designated historic present a special challenge to bridge engineers whenever rehabilitation work or improvements are made to the bridges. Federal and state laws protect historically significant bridges, and railings on these bridges can be subject to protection because of the role they play in aesthetics. Unfortunately, original railings on historic bridges do not typically meet current crash-test requirements and typically do not meet current standards for railing height and size of permitted openings. The objective of this study is to develop strategies that can be used to address existing railings on historic bridges and to develop solutions …

Heavy Vehicle Rollover Propensity At Roundabouts On Highspeed Roads, Thomas M. Hall

Open Access Theses

There is a recent trend of building roundabouts on high-speed roads, often with significant heavy vehicle traffic. With the increased presence of trucks on roundabouts, the issue of rollover has become a concern. Geometric features that allow excessive speed on the approach and entry have been connected to rollover, as well as sudden changes in crossfall and radius. However, the effect on the rollover threshold of changing the roundabout's circulatory superelevation is not fully understood. The impact of aggressive driving behaviors, as displayed by high driver speed far from the roundabout, as well as errors that are manifested by the …

Application Of Bayesian Networks In Consumer Service Industry, Yuan Gao

Open Access Theses

Gao, Yuan. M.S.I.E., Purdue University. December 2014. Application of Bayesian Networks in Consumer Service Industry. Major professor: Vincent G. Duffy The purpose of the present study is to explore the application of Bayesian networks in the consumer service industry to model causal relationships within complex risk factor structures using aggregate data. An analysis of the Hawaii tourism market was conducted to find out how visitor characteristics affect their behavior and experience as consumers during the trips, and influence the tourism market outcomes represented by measurable factors. Two hypotheses were proposed regarding the use of aggregate data and the influence of …

Principle Of Bio-Inspired Insect Wing Rotational Hinge Design, Fan Fei

Open Access Theses

A principle for designing and fabricating bio-inspired miniature artificial insect flapping wing using flexure rotational hinge design is presented. A systematic approach of selecting rotational hinge stiffness value is proposed. Based on the understanding of flapping wing aerodynamics, a dynamic simulation is constructed using the established quasi-steady model and the wing design. Simulations were performed to gain insight on how different parameters affect the wing rotational response. Based on system resonance a model to predict the optimal rotational hinge stiffness based on given wing parameter and flapping wing kinematic is proposed. By varying different wing parameters, the proposed method is …

Effects Of Hip And Ankle Moments On Running Stability: Simulation Of A Simplified Model, Rubin C. Cholera

Open Access Theses

In human running, the ankle, knee, and hip moments are known to play different roles to influence the dynamics of locomotion. A recent study of hip moments and several hip-based legged robots have revealed that hip actuation can significantly improve the stability of locomotion, whether controlled or uncontrolled. Ankle moments are expected to also significantly affect running stability, but in a different way than hip moments. Here we seek to advance the current theory of dynamic running and associated legged robots by determining how simple open-loop ankle moments could affect running stability. We simulate a dynamical model, and compare it …

Dynamic Wireless Power Transfer System For The Unmanned Aerial Vehicles, Tae Sup Lee

Open Access Theses

UAVs have limitless applications to help our daily lives for the autonomous operations. UAVs have a limited power capacity due to weight constraints and are therefore not able to travel long distances. Ground stations for recharging UAVs throughout different points can increase the flight time of the UAVs with the current UAV battery capacity. This study investigates how the wireless charging system for the ground station can be made more robust when there are misalignments. The wireless charging system is monitored by an Arduino, micro controller, to assess the current condition of charging. The Arduino is able to change the …

Distinguishing Harmonic Behavior Of Longitudinal Resonant Combustion In A Variable Geometry Model Rocket Combustor, Sarah W. Hester

Open Access Theses

Throughout the study of high frequency combustion instability in a single element Continuously Variable Resonance Combustor (CVRC), the excitation of the fundamental longitudinal mode is closely followed by the excitation of higher harmonic modes. In an attempt to establish a heuristic relationship between the appearances of the fundamental mode and its harmonics, several unstable fixed geometry and variable geometry tests from the CVRC are analyzed through traditional Fourier-based methods and alternative signal processing methods such as wavelet analysis and Instantaneous Frequency (IF) Analysis from PC Signal Analysis. Early results led to the conclusion that traditional Fourier-based analysis provides believable and …

High-Purity Gallium Analysis By Inductively Coupled Plasma Mass Spectrometry, Kyungjean Min

Open Access Theses

The mobility of Two-dimensional Electron Gas in AlGaAs/GaAs heterostructures that are grown in the Molecular Beam Epitaxy (MBE) can be increased by purification of the gallium used to grow the films. To attain 200 million cm2/Vs mobility, the impurity concentration of gallium should be reduced to below 1 ppb. The commercial 7N (99.99999%) gallium with 100 ppb total impurity is currently used in the MBE at Purdue University and is being purified by zone refining. To evaluate the commercial 7N gallium and establish the methodology for the impurity measurement after zone refining, germanium, iron, and zinc in 6N and 7N …

Using A Centrifuge For Quality Control Of Pre-Wetted Lightweight Aggregate In Internally Cured Concrete, Albert E. Miller

Open Access Theses

Early age shrinkage of cementitious systems can result in an increased potential for cracking which can lead to a reduction in service life. Early age shrinkage cracking can be particularly problematic for high strength concretes, which are often specified due to their high strength and low permeability. However, these high strength concretes frequently exhibit a reduction in the internal relative humidity (RH) due to the hydration reaction (chemical shrinkage) and self-desiccation which results in a bulk shrinkage, termed autogenous shrinkage, which is substantial at early ages. Due to the low permeability of these concretes, standard external curing is not always …

Synthesis Of Multilayered Microparticles For Targeted Drug Delivery, Elizabeth Mercer

Open Access Theses

Microparticles have been shown to be valuable in targeted drug delivery which can lead to an increased dose delivered to a targeted location, reduced patient side effects, and improved patient outcomes. The designed multilayered microparticles have the clinical application to deliver hydrophobic drugs to a targeted area. The composition of the microparticles consists of a poly-lactic acid (PLA) polymer core surrounded by a polymeric shell composed of Poly(lactic-co-glycolic acid)-Poly(ethylene glycol)-Maleimide(PLGA-PEG-Mal). The maleimide promotes conjugation of the collagen binding peptide, SILY. Targeting to type I collagen allows for this microparticle system to attach to exposed collagen in atherosclerotic vessels.

A novel …

Designing Sustainable Mentoring Programs: Examining The Role Of Social Community In The Stem College Student Experience, Joi-Lynn Mondisa

Open Access Theses

In order to begin to understand how to design programs that promote community development and produce beneficial outcomes for community members, we must first define the elements and functions of such a community. In this thesis, I define social community as an environment where like-minded individuals engage indynamic, multidirectional interactions that facilitate social support . Using a human-integrated systems approach, I propose a social community model for STEM minority mentoring programs to understand how a community's design plays a role in the learning and enrichment of its members. The social community model is comprised of three main components: program …

Crossflow Transition At Mach 6 On A Cone At Low Angles Of Attack, Ryan O. Henderson

Open Access Theses

Experiments on a sharp 7-degree cone at low angles of attack were conducted at Mach 6 to understand the stationary and traveling modes of crossflow disturbances, the interaction between them, and the development of other instabilities that can lead to transition. Using the Boeing/AFOSR Mach-6 Quiet Tunnel (BAM6QT), pressure and temperature measurements were collected to better describe crossflow characteristics. Noisy and quiet flow conditions were compared to understand crossflow development. Temperature Sensitive Paint (TSP) was used to measure the global surface temperatures on the model. Schmidt-Boelter (SB) gauges were used to convert the surface temperatures to heat transfer. The global …

Investigation Of Microstructural Alterations In M50 And 52100 Steel Using Nanoindentation, Kristin R. Paulson

Open Access Theses

Bearing steels are used in rolling elements and are designed to withstand heavy loads for an extended period of time. At the end of life, microstructural alterations within the material have been observed and are linked to failure. In this study, a three ball-on-rod fatigue tester was used to test M50 and 52100 steel cylindrical rods at differing loads of 4.0 GPa, 4.5 GPa, and 5.0 GPa and in lubricated and unlubricated conditions to 10 8 cycles in an attempt to produce microstructural alterations. Microstructural alterations characterized as butterflies were observed and investigated further in two M50 samples that were …

Algorithm Development And Analysis For Advanced Enginetechnologies Including Piezoelectric Fuel Injection And Variablevalve Actuation, Bradley W. Pietrzak

Open Access Theses

As vehicle emissions standards and fuel economy constraints become increasingly strict, the automotive industry must employ the use of advanced engine technologies to overcome these challenges. Fuel injection rate shaping and cylinder deactivation (CDA) are two such technologies, and both of them require the design and implementation of algorithms using various hardware and software tools.

Fuel injection rate shaping is one path towards cleaner and more efficient diesel engines. Piezoelectrically-actuated fuel injectors are well-suited for rate shaping operation, but are difficult to control. Control-related challenges arise primarily due to the lack of measurements available in a fuel injection system on-engine, …