Engineering Commons^™

Energy Planning Model Design For Forecasting The Final Energy Consumption Using Artificial Neural Networks, Haidy Eissa

Theses and Dissertations

“Energy Trilemma” has recently received an increasing concern among policy makers. The trilemma conceptual framework is based on three main dimensions: environmental sustainability, energy equity, and energy security. Energy security reflects a nation’s capability to meet current and future energy demand. Rational energy planning is thus a fundamental aspect to articulate energy policies. The energy system is huge and complex, accordingly in order to guarantee the availability of energy supply, it is necessary to implement strategies on the consumption side. Energy modeling is a tool that helps policy makers and researchers understand the fluctuations in the energy system. Over the …

Lessons Learned From Bp: Deepwater Horizon And The Transition To Renewables, Daniel Valle

Journal of Global Awareness

This paper analyzes the gradual transition of British Petroleum (BP), one of the world's largest oil and gas companies, into a renewable energy company focused on sustainability and the reduction of carbon emissions. BP's leadership and ethical practices are compared before and after the 2010 Deepwater Horizon disaster. The purpose of the comparison and the broader analysis of the transition is to identify how effective leadership can be used to transform a company with a suspect social responsibility record into a leader among its peers. Lessons learned from the disaster, and the subsequent transition conclude the research.

Modeling Electric Energy Generation In Ercot During Extreme Weather Events And The Impact Renewable Energy Has On Grid Reliability, Adam R. Ruthford, Bivin Sadler

SMU Data Science Review

This paper shows the inadequacy of current grid backup supplies, their ongoing threat to grid reliability, and the increased risk of customer blackouts. This paper also examines reliability concerns caused by renewable energy sources under more normal operating conditions. This paper seeks to model the impacts of extreme weather on ERCOTs grid. Unusual weather patterns require that the electrical grid operates in conditions outside normal operating parameters. Electrical system demand can spike well above normal levels. At the same time, weather influences can change the operating envelope of electrical generation equipment. The ERCOT grid has changed from its’ traditional mix …

Efficient Management Of Nitrogen And Phosphorus At Centralized Water Reclamation Facilities, Helene Kassouf

USF Tampa Graduate Theses and Dissertations

A variety of process configurations are employed at municipal water reclamation facilities (WRFs), such as 5-stage Bardenpho, oxidation ditch, modified Ludzack-Ettinger (MLE) process, and sidestream recycle. However, all of these configurations face certain challenges in achieving optimum treatment of nitrogen and phosphorus. In this dissertation, the driving objectives were to: (1) quantitatively assess the fate of nitrogen and phosphorus (mass fluxes) at a treatment facility that employs biological nutrient removal, aerobic digestion, and sidestream recycle, (2) evaluate the performance of a microbial fuel cell (MFC) as a technology to remove nitrogen from sidestreams at a treatment plant that employs that …

Modeling Portfolios Of Low Carbon Energy Generation Under Deep Uncertainty, Franklyn Kanyako

Doctoral Dissertations

In the 2015 Paris Agreement, nearly every country pledge through the Nationally Determined Contributions (NDCs) increased adoption of low carbon energy technologies in their energy system. However, allocating investments to different low carbon energy technologies under rising demand for energy and budget constraints, uncertain technical change in these technologies involves maneuvering significant uncertainties among experts, models, and decision-makers. We examine the interactions of low carbon energy sources (LCES) under the condition of deep uncertainty. Deep uncertainty directly impacts the understanding of the role of low carbon energy technologies in climate change mitigation and how much R&D investment should be allocated …

Vermont Transportation Energy Profile 2021, Jonathan Dowds, Dana Rowangould

University of Vermont Transportation Research Center

Slightly more than one-third of the total energy consumed in Vermont is used for transportation (see Figure E-1). Transportation energy is overwhelmingly derived from fossil fuels, with over 95% coming in the form of gasoline and diesel fuel. Transportation is also the largest source of greenhouse gas (GHG) emissions in the State, accounting for 39.1% GHGs in 2017.

Consequently, the 2016 Vermont Comprehensive Energy Plan (CEP) included three goals and nine supporting objectives related to reducing transportation sector energy consumption and GHG emissions (VDPS, 2016). The 2021 Vermont Transportation Energy Profile (“the Profile”) is the fifth installment of a biannual …

Why Indonesia Needs A New Energy Paradigm, Aditya Prasetyo

English Language Institute

The problem of Indonesia's dependence on petroleum as its main energy source can be overcome by instead using an energy mix. This study focuses on optimal utilization of other energy resources that can help to meet the demand for energy in Indonesia and help to reduce its dependence on oil, thereby preventing a future energy crises.

Dynamic Hvac Energy Management Using Commercial Building Occupancy Metrics & Neural Networks, Krishna Chaitanya Jagadeesh Simma

Civil Engineering ETDs

With the rise of technology use in buildings, it is now possible to collect data that can be used to improve building energy consumption. One factor that has significant impact on building energy consumption is occupancy. Recent studies have shown promising results in obtaining occupancy information from existing infrastructure such as WiFi router networks. However, these existing frameworks require additional investments through software upgrades, added infrastructure, computational resources, and may raise occupant privacy concerns. Additionally, with occupant thermal comfort statistics being lower than ASHAREA specified standards, a novel approach for indoor climate control is needed. To address the limitations in …

Sustainable Energy Storage, Jacob S. Grillo, Alyse C. Coonce, Jack R. Linchey, Nick P. Schnorr

Mechanical Engineering

This Final Design Review document covers the work we, students at California Polytechnic State University – San Luis Obispo, have performed in collaboration with Mr. Harish Bhutani and Dr. Mohammad Noori. The project’s intent is to create an energy storage system for off-grid and developing region applications using alternative technologies to lithium-ion battery storage. We plan to manufacture and assemble a scale model of the energy storage system to prove effectiveness and practicality. This system will store enough energy to power basic appliances and essential devices for a house or community. The chosen design direction will be a flywheel, as …

Cal Poly Wind Power: Wind Turbine Prototype, Sophie A. Spencer, Maggie Nevrly, Michael Reyna, Loi Q. Nguyen

Mechanical Engineering

The Cal Poly Wind Power (CPWP) club is competing in the Collegiate Wind Competition (CWC) hosted by the National Renewable Energy Laboratory (NREL). The CWC is hosted annually by NREL to increase the number of skilled workers prepared to work in the wind energy industry. Our senior project team is one of several design teams contributing to the CPWP prototype turbine design including the pitching mechanism, blade design, generator, and shaft. The scope of this project is to design the yaw mechanism, tower, and nacelle. The goal is to create components that function well with other planned components and are …

2021 Department Of Energy Collegiate Wind Competition Electrical System, Grayson Capers, Shane Alayvilla, Justin Rodrigues

Electrical Engineering

In this work, the implementation of the electrical system for Cal Poly’s 2021 Department of Energy Collegiate Wind Competition turbine is described. The mission of this project was to complete the turbine testing tasks to the best of the team’s ability. This system includes an off the shelf slotless permanent magnet synchronous generator and rectifier to produce a DC voltage. To maximize the power output at below-rated wind speeds, current sensors, voltage sensors, and a dynamic load with variable resistance were designed and tested. To curtail the power and rotor speed in high wind events, the turbine was equipped with …

Diversifying Nuclear Technology: A Technical Analysis On Small Modular Reactors And Its Impact On Nuclear Energy Policy, Carolina Lugo Mejia, Marcos Lugo

Helm's School of Government Conference - American Revival: Citizenship & Virtue

The energy policy debate in the United States has revolved around the diversification of energy sources while promoting advantageous economic profits. One drive for this has been the discussion of anthropogenic, environmental endangerment concerns (Vlassopoulous 2011, 104). However, despite the environmental concerns, the U.S. has for some time only relied on one type of energy source—fossil fuels. Fossil fuels are categorized as natural gas, coal, petroleum, and other gases responsible (U.S. Energy Administration 2019). Natural gas is responsible for 38.4%, coal for 23.4%, petroleum for 0.4%, and other gases for 0.3% of the U.S.’s electrical generation (U.S. Energy Administration 2019). …

Next Generation Energy Storage: An Examination Of Lignin-Based Carbon Composite Anodes For Sodium Ion Batteries Through Modeling And Simulation, Dayton G. Kizzire

Doctoral Dissertations

The current energy market relies heavily on fossil fuel sources; however, we are amidst a momentous shift towards wind, solar, and water based renewable energies. Large-scale energy storage allows renewable energy to be stored and supply the grid with consistent energy despite changing weather conditions. Improvements to large-scale energy storage in terms of cost, safety, and sustainability are crucial to wide-scale adoption. A promising candidate for large-scale energy storage are sodium-ion batteries using hard carbon anodes. Sodium is globally available, cheaper, and more sustainable than lithium, but requires a different anode structure. A sustainable hard carbon anode with excellent Li-ion …

Feasibility Study Of Portable Solar Powered Blood Storing Refrigerator, Saroj Subedi

Honors Theses

This report is focused on the preliminary feasibility of portable solar-powered blood-storing refrigerators primarily based on calculations of energy required to maintain the temperature of the refrigerator, the electricity required throughout the day, calculating sufficiency of power supplied by the solar panel, and selection of battery for power storage. The method and the trend of a feasibility study involve the study of blood properties, separation of blood components after donation, and their storage conditions. Then, the portable size of the refrigeration has been proposed with three different compartments for storage of each blood component. The further methods involve the selection …

Development And Testing Of Nanostructured Materials For Extreme Environment Applications, Nanthakishore Makeswaran

Open Access Theses & Dissertations

Nanostructured materials have many potential applications in the fields of power generation and transportation technologies, particularly in the areas of gas sensing technology, industrial gas turbines and protective coatings. In the former case β-Ga2O3 represents a promising candidate due to its high degree of stability and functionality for oxygen sensing at higher temperatures (>700oC). In the latter case, the application of Y-Si-Fe compounds acting as environmental barrier coatings for gas turbine and aerospace engine applications to protect from corrosion effects has been demonstrated in recent years. In both cases, however, there is room for improvement whether it is in …

Energy Consumption And Tardiness Improvement For A Flexible Job Shop And A Warehouse, Ahmad Ebrahimi

LSU Doctoral Dissertations

In recent years, energy consumption (EC) is studied to see its effects on monetary and non-monetary costs in manufacturing and warehousing. EC in manufacturing and warehousing, however, needs to be studied with conventional performance measures such as production/operation tardiness since there is a trade-off between EC and tardiness costs. Therefore, this research is conducted with four objectives to study EC and tardiness for a flexible job shop and a warehouse as follows. The first objective of this research is to integrate job scheduling and layout, which are interrelated in improving EC and tardiness for a flexible job shop. Thus, we …

Smud Solar Regatta, Logan Garby, Nam Le, Jacob Singer, Alejandro Carrera, Laura Casas

Mechanical Engineering

The Sacramento Municipal Utility District (SMUD) hosts the Solar Regatta every year in Rancho Seco, CA, a competition which consists of teams building a solar powered boat to compete in three races: the sprint race, endurance race, and slalom race. The Cal Poly Solar Regatta team was informed mid-project by SMUD that the competition has been canceled once again for spring 2021, but the team decided to move forward with the construction of the boat. The previous Cal Poly team from 2019/2020 designed the hull and propulsion system of the boat. The 2020/2021 team worked with the previous team in …

A Theoretical Study On Integration And Optimization Of Gas Turbine Problems With Solar Energy System, Ahmad M. Abubaker

Theses and Dissertations--Mechanical Engineering

Gas Turbine (GT) power plants suffer from sensitivity to ambient-air temperatures, high fuel consumption, and a high amount of waste heat dumped into the ambient. Various solutions were proposed to solve these drawbacks, which could simultaneously solve at most two problems, usually at the expense of the third. For instance, inlet-air cooling can reduce ambient-air temperatures but will result in increased fuel consumption. However, in this work, a novel cascaded system was integrated into a combined cycle, capable of simultaneously solving all the aforementioned GT drawbacks. Parabolic trough collectors were used to preheat the air at the combustion chamber inlet …

Investigating The Efficiency Of Energy Transfer In Vehicular Motion, Joshua M. Etukudo

Senior Projects Spring 2021

One of my principal interests in life is transportation which involves building and working with vehicles, and that is why I chose to pursue this project. This write-up, in addition to being a small-scale study of the various properties of automobiles, is to serve as a guide for others who wish to pursue such an endeavor in the years to come. To do this, I first take a look at three of the many key structures which enable vehicular movement: The engine, the wheels and the steering system. After this, I give a detailed recount of how I built the …

Use Of Energy Consumption During Milling To Fill A Measurement Gap In Hybrid Additive Manufacturing, K. L. M. Avegnon, P. Noll, M. R. Uddin, G. Madireddy, R. Williams, A. Achuthan, M. P. Sealy

Department of Mechanical and Materials Engineering: Faculty Publications

Coupling additive manufacturing (AM) with interlayer peening introduces bulk anisotropic properties within a build across several centimeters. Current methods to map high resolution anisotropy and heterogeneity are either destructive or have a limited penetration depth using a nondestructive method. An alternative pseudo-nondestructive method to map high-resolution anisotropy and heterogeneity is through energy consumption during milling. Previous research has shown energy consumption during milling correlates with surface integrity. Since surface milling of additively manufactured parts is often required for post-processing to improve dimensional accuracy, an opportunity is available to use surface milling as an alternative method to measure mechanical properties and …

Infrastructure Systems Modeling Using Data Visualization And Trend Extraction, Jacob Marshal Hale

Doctoral Dissertations

“Current infrastructure systems modeling literature lacks frameworks that integrate data visualization and trend extraction needed for complex systems decision making and planning. Critical infrastructures such as transportation and energy systems contain interdependencies that cannot be properly characterized without considering data visualization and trend extraction.

This dissertation presents two case analyses to showcase the effectiveness and improvements that can be made using these techniques. Case one examines flood management and mitigation of disruption impacts using geospatial characteristics as part of data visualization. Case two incorporates trend analysis and sustainability assessment into energy portfolio transitions.

Four distinct contributions are made in this …

Exploring Renewable Energy Futures In Humboldt County Consistent With The Goals Of California’S Renewable Portfolio Standard, Amin M. Younes

Cal Poly Humboldt theses and projects

Humboldt County has abundant wind, solar, and biomass resources, but has made limited progress towards the state’s 2045 requirement of 100% clean electricity. A recently rejected onshore wind project showed that technically and economically viable projects can fall to social and political challenges, emphasizing the need for social considerations in renewable transitions. I therefore integrated community members’ preferences into modeling of RPS-consistent renewable energy scenarios in Humboldt County. My model suggests that offshore wind, utility-scale solar, distributed solar, and biomass power are technically and economically viable sources of significant local generation at varying costs.

In interviews with energy-engaged residents, I …

Effect Of Cloud Cover On Optimum Orientations Of Fixed Solar Panels For Maximum Yearly Energy Collection, Prethew Prasad

Browse all Theses and Dissertations

The amount of cloud cover present in the sky is a significant factor when determining the solar radiation impinging on a solar panel. The optimum tilt required to achieve maximum energy impingement on a surface is also influenced by the amount of cloud cover. This work presents a method for determining the optimum tilt angle for a fixed solar panel when a set amount of cloud cover is present in the sky. Fixed tilt angles that have the most incident solar energy over the course of a year as a function of cloud cover, latitude, and azimuthal angle orientation are …

Reducing Environmental Impacts Of Natural Gas Compressor Stations And Applicability Of The Current Regulatory Framework, Scotty Joel Moates

All ETDs from UAB

The natural gas pipeline system is an integral part of the energy structure and critical to meeting energy demand in the United States. Natural gas compressor stations are the heart of the natural gas pipeline industry. Compressor stations compress the gas coming into the station and increase the pressure of the gas to ensure movement down the pipeline at the right operating pressure. This compression process is performed through natural-gas fire engines, such as reciprocating engines and turbines. Natural gas compressor station operations are subject to a wide range of environmental regulations. These regulations seek to mitigate the environmental impacts …

Cold Plasma Enhanced Active Sites On Supported Nip Nanoparticles For The Oxygen Evolution Reaction, Michael Ricci

Williams Honors College, Honors Research Projects

Identifying materials to efficiently facilitate the oxygen evolution reaction (OER) is key to advancing water electrolysis, an essential technology in the pathway towards a sustainable energy future. Here, we explore cold-plasma treatment as a facile method to enhance the activity of NiP nanoparticles supported on activated carbon. NiP nanoparticles were synthesized on an activated carbon support using a solid-state method and were then treated with argon, oxygen, and hydrogen plasmas for extended times. In all cases, plasma treatment reduced the number of active sites on the support. OER activity was evaluated by testing the materials in alkaline conditions. The activities …

Area-Delay Efficient Radix-4 8×8 Booth Multiplier For Dsp Applications, Subodh Singhal, Sujit Patel, Anurag Mahajan, Gaurav Saxena

Turkish Journal of Electrical Engineering and Computer Sciences

Booth multiplier is the key component in portable very large-scale integration (VSLI) systems enabled with signal and image processing applications. The area, delay, and energy are the major constraints in these systems. Therefore, in this paper, a detailed analysis of the state-of-the-art Booth multiplier architecture and its various internal units are presented to find the scope of optimization. Based on the finding of analysis, optimized new binary to 2's complement (B2C), Booth encoder-cum-selector type-1 and type-2, and partial product addition units are proposed. Furthermore, using these optimized units, an efficient parallel radix-4 8×8 Booth multiplier architecture is proposed. The simulation …