Engineering Commons^™

Docs_On_Blocks – A Defense In Depth Strategy For E-Healthcare, Saad Mohammed

Electronic Theses, Projects, and Dissertations

With the increase in the data breaches and cyber hacks, organizations have come to realize that cyber security alone would not help as the attacks are becoming more sophisticated and complex than ever. E-Healthcare industry has shown a promising improvement in terms of security over the past, but the threat remains. Thus, the E-Healthcare industries are aiming towards a Defense in Depth Strategy approach.

The project here describes how a Defense in Depth Strategy for E-Healthcare system can provide an environment for better security of the data and peer-to-peer interaction with stakeholders. The legacy systems have at some point failed …

Method Of Joints: Theory And Practice Of Designing, Building, And Testing Trusses, Andrew J. Hughes, Chris Merrill

Educational Leadership & Technology Faculty Publications

The authors of this article, like many of us, are proponents of engineering education but are also proponents of shop skills, craftsmanship, technological literacy, and the tacit knowledge and skills developed through applying sound theories during practical hands-on learning. The authors believe that engineering is an important aspect of our discipline, but so are the application of thinking, tool skills, measurement, geometric construction, manufacturing, instrumentation, testing and analysis, mathematical and scientific theories, and many other hands-on, minds-on skillsets that all need to maintain association with our discipline. As the authors are proponents for engineering education that is done well, they …

Solving Concurrent And Nonconcurrent Coplanar Force Systems: Balancing Theory And Practice In The Technology And Engineering Education Classroom, Andrew J. Hughes, Chris Merrill

Educational Leadership & Technology Faculty Publications

The basic concepts inherent to statics, including unbalanced and balanced forces and instability and stability of physical systems, have traditionally been covered in middle and high school physical science courses (Physical Science as indicated in Next Generation Science Standards). Yet, these concepts are covered using a physical science approach that has minor but significant differences in terminology, structure, and focus when compared with an engineering approach. Since a robust understanding of statics is considered an essential component for most engineering disciplines, Technology and Engineering Education’s (T&EE) implementation of statics with an engineering approach could promote students’ ability to transfer learning …

Web Application For Movie Performance Prediction, Devalkumar Patel

Electronic Theses, Projects, and Dissertations

This is an amazing and unique idea for the web application. The purpose of this application is to address those movie lover people who is always in a hurry to visit the theatre to watch upcoming movies irrespective of which star cast is in it. This system is a mixture of desktop applications, python libraries, and simple math arithmetic. The application can be used by anyone which is ultimately helping them to decide, either they should watch the movie or not. The user just submits the name of the movie. This application is developed in Visual Studio 2019 for functioning …

A Mock Software Company: For Teaching Software Engineering (Cse 455) Course, Arturo Concepcion

Q2S Enhancing Pedagogy

This is a novel way of teaching software engineering as an upper-division course for senior computer science students. Teach the class as a mock software company where students play a role in the “software company” such as project managers, assistant project managers, team leads, software engineers, software designers, UI designers, QA engineers, etc. Then to make a realistic work environment, solicit software projects from real clients, not toy software projects that the instructors think of. It has been proven, pedagogically, that project-based learning is one of the most effective way of teaching. There are no quizzes, no mid-terms, and no …

Acue Certificate In Effective College Instruction Curated Reflections, Fadi Muheidat

Q2S Enhancing Pedagogy

The ACUE course is full of useful, best practice, experts’ opinions, and elaborated research on effective teaching. I feel I need another round of reading and watching the videos and classroom scenarios and go through the state-of-the-art techniques and work samples. My peers who participated in this course enriched the discussion and their own experiences best practices. Samples of reflections and implementation strategies listed below.

Concrete Beam Design: Pouring The Foundation To Engineering In T&E Classrooms, Andrew J. Hughes, Chris Merrill

Educational Leadership & Technology Faculty Publications

Ask a middle or high school student if they could design a concrete beam that weighs only 20 pounds and is 36” long but must hold 600 pounds without failing. What is the student likely to say? What if the student was told that, with some optimized decision making based on relatively straightforward mathematics, their beam could hold 2400 pounds or more? The focus of this article is not on concrete beam design, it is rather an introduction to engineering principles in beam design using a lab activity. The concepts and skills learned in this article will lead students into …

Analyzing Concrete Beam Design: Verifying Predictions In T&Ee Classrooms, Andrew J. Hughes, Chris Merrill

Educational Leadership & Technology Faculty Publications

Design is often accepted as a fundamental aspect of engineering (Dym, et al., 2005). The design process is frequently portrayed as a set of steps. However, the design process is more complex than just a set of steps in a relatively fixed process. The complex nature of design, design thinking, questioning, and decision-making is exactly what technology and engineering classrooms are well suited to address. When addressing the question—“Why is technology and engineering education (T&EE) so important?”—the authors believe T&EE’s importance relates to our discipline’s ability to solve complex problems by balancing theory and practice in engaging hands-on learning scenarios …

Blockchain Adoption Model For The Global Banking Industry, Zaina Kawasmi, Evans Akwasi Gyasi, Deneise Dadd

Journal of International Technology and Information Management

Blockchain has become the new hype term in the business world for the last decade. Due to the new technology’s characteristics and innovative applications, it is being adopted globally in a wide number of industries including the banking industry, yet no adoption model is provided to guide this process. This research aims to contribute to facilitating the successful adoption and implementation of the blockchain new technology in the banking industry. Building on the assumption that the blockchain’s adoption in banking will be directed by the regulations and best practices guidelines of the global banking regulatory bodies and practitioner, this research …

Assessing The Influence Of Self-Efficacy On The Acceptance Of Mobile Phone Technology Within The Smes, Renatus Michael Mushi

Journal of International Technology and Information Management

Mobile phone technologies have proved to provide a significant transformation in performing various activities within companies, especially in least developed regions. Mobile phones provide opportunities for employees of organisations to work any time and anywhere. SMEs comprise of employees who perform multitasking job roles due to their small in size and low financial capabilities and most cases, some of them work remotely from their main offices.

Self-Efficacy is a belief that the user has enough skills to use technology to perform a task at hand. This is one of the factors influencing of acceptance of technologies at the workplaces such …

The Impact Of E-Commerce On The Development Of Entrepreneurship In Saudi Arabia, Khulood Al-Mani

Journal of International Technology and Information Management

This paper is based on a Ph.D. study investigating the critical challenges facing e-commerce adoption by entrepreneurs in Saudi Arabia, identifying the major driving factors, barriers, motivations, perceived advantages, potential problems and some practical solutions as well as future expectations from entrepreneurs’ perspectives. From the study findings, a set of practical recommendations were derived for the government, entrepreneurs and investors in Saudi Arabia to consider, to promote ecommerce entrepreneurship in the county.

The research was undertaken using a qualitative approach. Data collection techniques involved in-depth, semi-structured interviews, with (1) e-commerce entrepreneurs, and (2) government authorities, educational initiatives and private support …

Digital Technologies As Antecedents To Process Integration And Dynamic Capabilities In Healthcare: An Empirical Investigation, Tulika Chakravorty, Karunakar Jha, Sunil Barthwal, Samyadip Chakraborty

Journal of International Technology and Information Management

Healthcare has been in focus over the past decade due to its criticality and continuous revolution. In this digital era, with the advent of various technologies, healthcare is undergoing a massive transformation. This study attempts to analyze the impacts of three major digital technologies which are being adopted in the healthcare sector which are electronic medical records (EMR), enterprise resource planning (ERP) and internet-of-things (IoT) enabled medical wearables in the hospital context. Focusing towards analyzing the impact of these technologies towards process-integration and further towards dynamic capabilities like quality, agility and responsiveness; the study framework is well-grounded by two theoretical-underpinnings …

Determinants Of Startup Funding: The Interaction Between Web Attention And Culture, Jie Ren, Viju Raghupathi, Wullianallur Raghupathi

Journal of International Technology and Information Management

Technology empowers entrepreneurs to pursue alternative funding through platforms like crowdfunding. This research explores significant startup funding factors using Crunchbase. Controlling for common factors (acquisition/funding-rounds/IPO), the research uniquely focuses on web attention - the visibility on social media - and its impact on funding. It also examines the moderating influence of startup’s home country culture (individualism/collectivism). Findings show stronger positive impact of web attention on startup funding for collectivist countries. While individualistic investors value personal goals, collectivists value collaborative goals - inclinations that align with crowdfunding behavior. Therefore while increasing web attention, crowdfunding efforts can be targeted towards collectivist countries.

Food Printing: Evolving Technologies, Challenges, Opportunities, And Best Adoption Strategies, Sharmin Attarin, Mohsen Attaran

Journal of International Technology and Information Management

3D printing is a process of making three-dimensional objects using additive processes where layers are laid down in succession to create a complete object. Companies across the globe are actively piloting and leveraging the inherent benefits of 3D printing technology. Today, 3D printing can revolutionize food innovation and production through better creativity, customizability, and sustainability. This article highlights 3D printing evolving technologies and trends and identifies its applications and implementation challenges. In this paper, we conducted a literature review to explore 3D printing's current technologies and applications in the food industry, including its advantages, its potential implications, and its obstacles …

Table Of Contents Jitim Vol 29 Issue 1, 2020

Journal of International Technology and Information Management

Table of contents

Assessment Of The Needs Of Ict Skills On Employability In Smes: A Vft Approach, Renatus Michael Mushi

Journal of International Technology and Information Management

the globalised economy comes with extra demand of ICT skills among the graduates. This is due to the demand if ICT technicalities in performing a number of basic activities in the workplaces. Majority of studies which concentrate with ICT skills on employability deals with technical enterprises. In non-technical companies such as construction, manufacturing and agriculture, ICT is studied as among the basic skill-set of graduates. However, recently, there has been special demand of graduates with basic ICT knowledge on recruitment processes. This indicates the growing demand of basic ICT skills among a broad range of professions. However, the type of …

Evaluating Students Information System Success Using Delone And Mclean’S Model: Student’S Perspective, Majaliwa Mkinga, Herman Mandari

Journal of International Technology and Information Management

System success is considered to be an important element in accomplishing the goals of the organization; therefore evaluation of system success needs to be done in order to ensure that investment in Information System is successful. Most of Higher Learning Institutions (HLIs) in Tanzania have adopted the use of IS in providing service to their customers. Nevertheless, there is less evidence that system success evaluation has been done in order to identify the desired characteristics which could make IS more effective. Due to that, this study evaluates the effectiveness of Student Information System (SIS) used at the Institute of Finance …

Quantum Computing: Principles And Applications, Yoshito Kanamori, Seong-Moo Yoo

Journal of International Technology and Information Management

The development of quantum computers over the past few years is probably one of the significant advancements in the history of quantum computing. D-Wave quantum computer has been available for more than eight years. IBM has made its quantum computer accessible via its cloud service. Also, Microsoft, Google, Intel, and NASA have been heavily investing in the development of quantum computers and their applications. The quantum computer seems to be no longer just for physicists and computer scientists but also for information system researchers. This paper introduces the basic concepts of quantum computing and describes well-known quantum applications for non-physicists. …

An Integrated View Of Data: Application Of Knowledge Modeling To Data Management, Sung-Kwan Kim, Wenjun Wang

Journal of International Technology and Information Management

Data management has become an important challenge. Good data management requires an effective approach to collecting, storing, and accessing data across the enterprise. In this paper, a knowledge modeling approach to data management is introduced with an emphasis on data requirements analysis. A knowledge model can provide a high-level view of organizational data by specifying the structure and relationships of the knowledge contents used in business processes. The proposed knowledge modeling approach is business process oriented and decision oriented. The description of the knowledge contents in the model is based on ontological specification. The model is comprised of five elements: …

Table Of Contents Jitim Vol 29 Issue 2, 2020

Journal of International Technology and Information Management

Table of contents

Table Of Contents Jitim Vol 29 Issue 3, 2020

Journal of International Technology and Information Management

Table of contents