Open Access. Powered by Scholars. Published by Universities.®
- Keyword
-
- Sustainability (2)
- Sustainable Manufacturing (2)
- 3 (1)
- 3D reconstruction (1)
- 3D tomography (1)
-
- 3]propellane triimides (1)
- 6R (1)
- Acid gas (1)
- Amine solvent (1)
- Aquaporins (1)
- Atomically-thin material (1)
- Batteries (1)
- Biomedical materials (1)
- Biomimetic (1)
- Carbon capture (1)
- Carbon nanotubes (1)
- Carboxylic acid (1)
- Catalysis (1)
- Catalyst (1)
- Cell therapy (1)
- Cellular coatings (1)
- Chemical elements (1)
- Coal combustion products (1)
- Coatings (1)
- Computationally aided design (1)
- Conducting polymers (1)
- Corrosion (1)
- Crystallization Modes (1)
- DFS (1)
- Deformation (1)
Articles 1 - 27 of 27
Full-Text Articles in Engineering
Proppant For Use In Hydraulic Fracturing To Stimulate A Well, Thomas Lee Robl, Anne Elizabeth Oberlink
Proppant For Use In Hydraulic Fracturing To Stimulate A Well, Thomas Lee Robl, Anne Elizabeth Oberlink
Center for Applied Energy Research Faculty Patents
A proppant for use in hydraulic fracturing to stimulate a well is provided. The proppant is fly ash particles having a mean particle size (d50) of between 45 μm and 150 μm and a size distribution defined by (d10) ≤ 5 μm and (d98) ≤ 250 μm.
Computationally Aided Design Of A High-Performance Organic Semiconductor: The Development Of A Universal Crystal Engineering Core, Anthony J. Petty Ii, Qianxiang Ai, Jeni C. Sorli, Hamna F. Haneef, Geoffrey E. Purdum, Alex M. Boehm, Devin B. Granger, Kaichen Gu, Carla Patricia Lacerda Rubinger, Sean R. Parkin, Kenneth R. Graham, Oana D. Jurchescu, Yueh-Lin Loo, Chad Risko, John E. Anthony
Computationally Aided Design Of A High-Performance Organic Semiconductor: The Development Of A Universal Crystal Engineering Core, Anthony J. Petty Ii, Qianxiang Ai, Jeni C. Sorli, Hamna F. Haneef, Geoffrey E. Purdum, Alex M. Boehm, Devin B. Granger, Kaichen Gu, Carla Patricia Lacerda Rubinger, Sean R. Parkin, Kenneth R. Graham, Oana D. Jurchescu, Yueh-Lin Loo, Chad Risko, John E. Anthony
Chemistry Faculty Publications
Herein, we describe the design and synthesis of a suite of molecules based on a benzodithiophene “universal crystal engineering core”. After computationally screening derivatives, a trialkylsilylethyne-based crystal engineering strategy was employed to tailor the crystal packing for use as the active material in an organic field-effect transistor. Electronic structure calculations were undertaken to reveal derivatives that exhibit exceptional potential for high-efficiency hole transport. The promising theoretical properties are reflected in the preliminary device results, with the computationally optimized material showing simple solution processing, enhanced stability, and a maximum hole mobility of 1.6 cm2 V−1 s−1.
Nanogaps On Atomically Thin Materials As Non-Volatile Read/Writable Memory Devices, Douglas Robert Strachan, Abhishek Sundararajan, Mathias Joseph Boland
Nanogaps On Atomically Thin Materials As Non-Volatile Read/Writable Memory Devices, Douglas Robert Strachan, Abhishek Sundararajan, Mathias Joseph Boland
Physics and Astronomy Faculty Patents
The present invention relates to the presence of nanogaps across a metal dispersed over an atomically-thin material, such that the nanogap exposes the atomically-thin material. The resulting device offers an ultra-short gap with ballistic transport and demonstrated switching in the presence of a gate or dielectric material in close proximity to the channel.
Thermal Interface Material, Matthew Collins Weisenberger, John Davis Craddock
Thermal Interface Material, Matthew Collins Weisenberger, John Davis Craddock
Center for Applied Energy Research Faculty Patents
A flexible sheet of aligned carbon nanotubes includes an array of aligned nanotubes in a free standing film form not adhered to the synthesis substrate, with a matrix infiltrated interstitially into the nanotube array with access to the nanotube tips from both the top and bottom. That is, the infiltrant is purposely limited from over-filling or coating one or both exterior top and/or bottom surfaces of the array, blocking access to the tips. A typical matrix is a polymer material.
Method Of Development And Use Of Catalyst-Functionalized Catalytic Particles To Increase The Mass Transfer Rate Of Solvents Used In Acid Gas Cleanup, Leland R. Widger, Cameron A. Lippert, Kunlei Liu
Method Of Development And Use Of Catalyst-Functionalized Catalytic Particles To Increase The Mass Transfer Rate Of Solvents Used In Acid Gas Cleanup, Leland R. Widger, Cameron A. Lippert, Kunlei Liu
Center for Applied Energy Research Faculty Patents
The present invention relates to methods for improving carbon capture using entrained catalytic-particles within an amine solvent. The particles are functionalized and appended with a CO2 hydration catalyst to enhance the kinetics of CO2 hydration and improve overall mass transfer of CO2 from an acid gas.
Composite Membranes Derived From Cellulose And Lignin Sulfonate For Selective Separations And Antifouling Aspects, Andrew Steven Colburn, Ronald J. Vogler, Aum Patel, Mariah Bezold, John D. Craven, Chunqing Liu, Dibakar Bhattacharyya
Composite Membranes Derived From Cellulose And Lignin Sulfonate For Selective Separations And Antifouling Aspects, Andrew Steven Colburn, Ronald J. Vogler, Aum Patel, Mariah Bezold, John D. Craven, Chunqing Liu, Dibakar Bhattacharyya
Chemical and Materials Engineering Faculty Publications
Cellulose-based membrane materials allow for separations in both aqueous solutions and organic solvents. The addition of nanocomposites into cellulose structure is facilitated through steric interaction and strong hydrogen bonding with the hydroxy groups present within cellulose. An ionic liquid, 1-ethyl-3-methylimidazolium acetate, was used as a solvent for microcrystalline cellulose to incorporate graphene oxide quantum dots into cellulose membranes. In this work, other composite materials such as, iron oxide nanoparticles, polyacrylic acid, and lignin sulfonate have all been uniformly incorporated into cellulose membranes utilizing ionic liquid cosolvents. Integration of iron into cellulose membranes resulted in high selectivity (> 99%) of neutral …
Optimization Of Induction Quenching Processes For Hss Roll Based On Mmpt Model, Ligang Liu, Hui Yu, Zhiqiang Yang, Chunmei Zhao, Tongguang Zhai
Optimization Of Induction Quenching Processes For Hss Roll Based On Mmpt Model, Ligang Liu, Hui Yu, Zhiqiang Yang, Chunmei Zhao, Tongguang Zhai
Chemical and Materials Engineering Faculty Publications
To improve the comprehensive performance of high speed steel (HSS) cold rolls, the induction hardening processes were analyzed by numerical simulation and experimental research. Firstly, a modified martensitic phase transformation (MMPT) model of the tested steel under stress constraints was established. Then, the MMPT model was fed into DEFORM to simulate the induction quenching processes of working rolls based on an orthogonal test design and the optimal dual frequency of the induction quenching process was obtained. The results indicate that the depth of the roll’s hardened layer increases by 32.5% and the axial residual tensile stress also becomes acceptable under …
Synthesis Of Metal Oxide Surfaces And Interfaces With Crystallographic Control Using Solid-Liquid-Vapor Etching And Vapor-Liquid-Solid Growth, Beth S. Guiton, Lei Yu
Synthesis Of Metal Oxide Surfaces And Interfaces With Crystallographic Control Using Solid-Liquid-Vapor Etching And Vapor-Liquid-Solid Growth, Beth S. Guiton, Lei Yu
Chemistry Faculty Patents
The present invention provides integrated nanostructures comprising a single-crystalline matrix of a material A containing aligned, single-crystalline nanowires of a material B, with well-defined crystallographic interfaces are disclosed. The nanocomposite is fabricated by utilizing metal nanodroplets in two subsequent catalytic steps: solid-liquid-vapor etching, followed by vapor-liquid-solid growth. The first etching step produces pores, or “negative nanowires” within a single-crystalline matrix, which share a unique crystallographic direction, and are therefore aligned with respect to one another. Further, since they are contained within a single, crystalline, matrix, their size and spacing can be controlled by their interacting strain fields, and the array …
Transient Analysis Of Diffusion-Induced Deformation In A Viscoelastic Electrode, Yaohong Suo, Fuqian Yang
Transient Analysis Of Diffusion-Induced Deformation In A Viscoelastic Electrode, Yaohong Suo, Fuqian Yang
Chemical and Materials Engineering Faculty Publications
In this study, we analyze the transient diffuse-induced-deformation of an electrode consisting of the conducting polymer polypyrrole (PPY) by using the theories of linear viscoelasticity and diffusion-induced stress. We consider two constitutive relationships with dependence of viscosity on strain rate: Kelvin-Voigt model and three-parameter solid model. A numerical method is used to solve the problem of one-dimensional, transient diffusion-induced-deformation under potentiostatic operation. The numerical results reveal that the maximum displacement occurs at the free surface and the maximum stress occurs at the fixed end. The inertia term causes the stress to increase at the onset of lithiation. The stress decreases …
Triperyleno[3,3,3]Propellane Triimides: Achieving A New Generation Of Quasi-D3h Symmetric Nanostructures In Organic Electronics, Lingling Lv, Josiah Roberts, Chengyi Xiao, Zhenmei Jia, Wei Jiang, Chad Risko, Lei Zhang
Triperyleno[3,3,3]Propellane Triimides: Achieving A New Generation Of Quasi-D3h Symmetric Nanostructures In Organic Electronics, Lingling Lv, Josiah Roberts, Chengyi Xiao, Zhenmei Jia, Wei Jiang, Chad Risko, Lei Zhang
Chemistry Faculty Publications
Rigid three-dimensional (3D) polycyclic aromatic hydrocarbons (PAHs), in particular 3D nanographenes, have garnered interest due to their potential use in semiconductor applications and as models to study through-bond and through-space electronic interactions. Herein we report the development of a novel 3D-symmetric rylene imide building block, triperyleno[3,3,3]propellane triimides (6), that possesses three perylene monoimide subunits fused on a propellane. This building block shows several promising characteristics, including high solubility, large π-surfaces, electron-accepting capabilities, and a variety of reactive sites. Further, the building block is compatible with different reactions to readily yield quasi-D3h symmetric nanostructures (9, …
Formability Of A Hsas Based On Hot Processing Maps And Texture Analyses, Zhiqiang Yang, Ligang Liu, Tongguang Zhai, Chunmei Zhao, Hui Yu, Qiang Li
Formability Of A Hsas Based On Hot Processing Maps And Texture Analyses, Zhiqiang Yang, Ligang Liu, Tongguang Zhai, Chunmei Zhao, Hui Yu, Qiang Li
Chemical and Materials Engineering Faculty Publications
Aiming to improve the formability of a HSAS Docol 1500 Bor, hot processing maps were obtained based on Prasad, Babu and Murty instability criteria. The hot processing maps based on the above instability criteria are similar and the explanation of its similarity is given. Recrystallization and misorientation in typical quenched specimens were observed by using SEM with a EBSD system. It was found that the fraction values of HAGBs in quenched martensite are all below 0.4 under experimental conditions. Flow location bands occurs at lower deformation temperatures and higher strain rates. The textures in martensite mainly include ⟨110⟩ / / …
Surface-Controlled Dissolution Rates: A Case Study Of Nanoceria In Carboxylic Acid Solutions, Eric A. Grulke, Matthew J. Beck, Robert A. Yokel, Jason M. Unrine, Uschi M. Graham, Matthew L. Hancock
Surface-Controlled Dissolution Rates: A Case Study Of Nanoceria In Carboxylic Acid Solutions, Eric A. Grulke, Matthew J. Beck, Robert A. Yokel, Jason M. Unrine, Uschi M. Graham, Matthew L. Hancock
Chemical and Materials Engineering Faculty Publications
Nanoparticle dissolution in local milieu can affect their ecotoxicity and therapeutic applications. For example, carboxylic acid release from plant roots can solubilize nanoceria in the rhizosphere, affecting cerium uptake in plants. Nanoparticle dispersions were dialyzed against ten carboxylic acid solutions for up to 30 weeks; the membrane passed cerium-ligand complexes but not nanoceria. Dispersion and solution samples were analyzed for cerium by inductively coupled plasma mass spectrometry (ICP-MS). Particle size and shape distributions were measured by transmission electron microscopy (TEM). Nanoceria dissolved in all carboxylic acid solutions, leading to cascades of progressively smaller nanoparticles and producing soluble products. The dissolution …
Green Synthesis Nanocomposite Membranes, Dibakar Bhattacharyya, Vasile Smuleac, Rajender S. Varma, Subhas K. Sikdar
Green Synthesis Nanocomposite Membranes, Dibakar Bhattacharyya, Vasile Smuleac, Rajender S. Varma, Subhas K. Sikdar
Chemical and Materials Engineering Faculty Patents
A nanocomposite membrane includes a macroporous polymer membrane having a plurality of pores. A plurality of metal nanoparticles are synthesized and immobilized within those plurality of pores. The nanoparticles are reduced and capped with a green reducing and capping agent such as green tea extract.
Nano-Scale Rare Earth Distribution In Fly Ash Derived From The Combustion Of The Fire Clay Coal, Kentucky, James C. Hower, Dali Qian, Nicolas J. Briot, Eduardo Santillan-Jimenez, Madison M. Hood, Ross K. Taggart, Heileen Hsu-Kim
Nano-Scale Rare Earth Distribution In Fly Ash Derived From The Combustion Of The Fire Clay Coal, Kentucky, James C. Hower, Dali Qian, Nicolas J. Briot, Eduardo Santillan-Jimenez, Madison M. Hood, Ross K. Taggart, Heileen Hsu-Kim
Center for Applied Energy Research Faculty and Staff Publications
Fly ash from the combustion of eastern Kentucky Fire Clay coal in a southeastern United States pulverized-coal power plant was studied by scanning electron microscopy (SEM), transmission electron microscopy (TEM), and selected area electron diffraction (SAED). TEM combined with elemental analysis via energy dispersive X-ray spectroscopy (EDS) showed that rare earth elements (REE; specifically, La, Ce, Nd, Pr, and Sm) were distributed within glassy particles. In certain cases, the REE were accompanied by phosphorous, suggesting a monazite or similar mineral form. However, the electron diffraction patterns of apparent phosphate minerals were not definitive, and P-lean regions of the glass consisted …
Limit Equilibrium Method-Based Shear Strength Prediction For Corroded Reinforced Concrete Beam With Inclined Bars, Yafei Ma, Baoyong Lu, Zhongzhao Guo, Lei Wang, Hailong Chen, Jianren Zhang
Limit Equilibrium Method-Based Shear Strength Prediction For Corroded Reinforced Concrete Beam With Inclined Bars, Yafei Ma, Baoyong Lu, Zhongzhao Guo, Lei Wang, Hailong Chen, Jianren Zhang
Mechanical Engineering Faculty Publications
Shear strength is a widely investigated parameter for reinforced concrete structures. The corrosion of reinforcement results in shear strength reduction. Corrosion has become one of the main deterioration factors in reinforced concrete beam. This paper proposes a shear strength model for beams with inclined bars based on a limit equilibrium method. The proposed model can be applied to both corroded and uncorroded reinforced concrete beams. Besides the tensile strength of longitudinal steel bars, the shear capacity provided by the concrete on the top of the diagonal crack, the tensile force of the shear steel at the diagonal crack, the degradation …
Method Of Increasing Mass Transfer Rate Of Acid Gas Scrubbing Solvents, Joseph E. Remias, Cameron A. Lippert, Kunlei Liu
Method Of Increasing Mass Transfer Rate Of Acid Gas Scrubbing Solvents, Joseph E. Remias, Cameron A. Lippert, Kunlei Liu
Center for Applied Energy Research Faculty Patents
A method of increasing the overall mass transfer rate of acid gas scrubbing solids is disclosed. Various catalyst compounds for that purpose are also disclosed.
Near-Surface Material Phases And Microstructure Of Scandate Cathodes, Xiaotao Liu, Bernard K. Vancil, Matthew J. Beck, Thomas John Balk
Near-Surface Material Phases And Microstructure Of Scandate Cathodes, Xiaotao Liu, Bernard K. Vancil, Matthew J. Beck, Thomas John Balk
Chemical and Materials Engineering Faculty Publications
Scandate cathodes that were fabricated using the liquid-solid process and that exhibited excellent emission performance were characterized using complementary state-of-the-art electron microscopy techniques. Sub-micron BaAl2O4 particles were observed on the surfaces and edges of tungsten particles, as seen in cross-section samples extracted from the scandate cathode surface regions. Although several BaAl2O4 particles were observed to surround smaller Sc2O3 nanoparticles, no chemical mixing of the two oxides was detected, and in fact the distinct oxide phases were separately verified by chemical analysis and also by 3D elemental tomography. Nanobeam electron diffraction confirmed …
Increasing Salt Rejection Of Polybenzimidazole Nanofiltration Membranes Via The Addition Of Immobilized And Aligned Aquaporins, Priyesh Ashokrao Wagh, Xinyi Zhang, Ryan Blood, Peter M. Kekenes-Huskey, Prasangi Rajapaksha, Yinan Wei, Isabel C. Escobar
Increasing Salt Rejection Of Polybenzimidazole Nanofiltration Membranes Via The Addition Of Immobilized And Aligned Aquaporins, Priyesh Ashokrao Wagh, Xinyi Zhang, Ryan Blood, Peter M. Kekenes-Huskey, Prasangi Rajapaksha, Yinan Wei, Isabel C. Escobar
Chemical and Materials Engineering Faculty Publications
Aquaporins are water channel proteins in cell membrane, highly specific for water molecules while restricting the passage of contaminants and small molecules, such as urea and boric acid. Cysteine functional groups were installed on aquaporin Z for covalent attachment to the polymer membrane matrix so that the proteins could be immobilized to the membranes and aligned in the direction of the flow. Depth profiling using x-ray photoelectron spectrometer (XPS) analysis showed the presence of functional groups corresponding to aquaporin Z modified with cysteine (Aqp-SH). Aqp-SH modified membranes showed a higher salt rejection as compared to unmodified membranes. For 2 M …
Fluorescence Of Cdse/Zns Quantum Dots In Toluene: Effect Of Cyclic Temperature, Ting Chen, Weiling Luan, Shaofu Zhang, Fuqian Yang
Fluorescence Of Cdse/Zns Quantum Dots In Toluene: Effect Of Cyclic Temperature, Ting Chen, Weiling Luan, Shaofu Zhang, Fuqian Yang
Chemical and Materials Engineering Faculty Publications
Quantum dots (QDs) are the potential material for the application in optical thermometry, and have been successfully applied to solar cells, LEDs, bio-labeling, structural health monitoring, etc. In this paper, we study the fluorescence properties of CdSe/ZnS QDs in toluene under the action of heating-cooling cycles. The experimental results show that, in a heating-cooling cycle, increasing temperature causes red-shift of the emission peak and the decrease of the PL intensity, and decreasing temperature causes blue-shift of the emission peak and the increase of the PL intensity. The surface structures of the QDs likely are dependent on the cycle numbers, which …
Coatings On Mammalian Cells: Interfacing Cells With Their Environment, Kara A. Davis, Pei-Jung Wu, Calvin F. Cahall, Cong Li, Anuhya Gottipati, Brad J. Berron
Coatings On Mammalian Cells: Interfacing Cells With Their Environment, Kara A. Davis, Pei-Jung Wu, Calvin F. Cahall, Cong Li, Anuhya Gottipati, Brad J. Berron
Chemical and Materials Engineering Faculty Publications
The research community is intent on harnessing increasingly complex biological building blocks. At present, cells represent a highly functional component for integration into higher order systems. In this review, we discuss the current application space for cellular coating technologies and emphasize the relationship between the target application and coating design. We also discuss how the cell and the coating interact in common analytical techniques, and where caution must be exercised in the interpretation of results. Finally, we look ahead at emerging application areas that are ideal for innovation in cellular coatings. In all, cellular coatings leverage the machinery unique to …
Effect Of Crystallization Modes In Tips-Pentacene/Insulating Polymer Blends On The Gas Sensing Properties Of Organic Field-Effect Transistors, Jung Hun Lee, Yena Seo, Yeong Don Park, John E. Anthony, Do Hun Kwak, Jung Ah Lim, Sunglim Ko, Ho Won Jang, Kilwon Cho, Wi Hyoung Lee
Effect Of Crystallization Modes In Tips-Pentacene/Insulating Polymer Blends On The Gas Sensing Properties Of Organic Field-Effect Transistors, Jung Hun Lee, Yena Seo, Yeong Don Park, John E. Anthony, Do Hun Kwak, Jung Ah Lim, Sunglim Ko, Ho Won Jang, Kilwon Cho, Wi Hyoung Lee
Center for Applied Energy Research Faculty and Staff Publications
Blending organic semiconductors with insulating polymers has been known to be an effective way to overcome the disadvantages of single-component organic semiconductors for high-performance organic field-effect transistors (OFETs). We show that when a solution processable organic semiconductor (6,13-bis(triisopropylsilylethynyl)pentacene, TIPS-pentacene) is blended with an insulating polymer (PS), morphological and structural characteristics of the blend films could be significantly influenced by the processing conditions like the spin coating time. Although vertical phase-separated structures (TIPS-pentacene-top/PS-bottom) were formed on the substrate regardless of the spin coating time, the spin time governed the growth mode of the TIPS-pentacene molecules that phase-separated and crystallized on the …
Achieving Superelasticity In Additively Manufactured Niti In Compression Without Post-Process Heat Treatment, Narges Shayesteh Moghaddam, Soheil Saedi, Amirhesam Amerinatanzi, Alejandro Hinojos, Ali Ramazani, Julia Kundin, Michael J. Mills, Haluk E. Karaca, Mohammad Elahinia
Achieving Superelasticity In Additively Manufactured Niti In Compression Without Post-Process Heat Treatment, Narges Shayesteh Moghaddam, Soheil Saedi, Amirhesam Amerinatanzi, Alejandro Hinojos, Ali Ramazani, Julia Kundin, Michael J. Mills, Haluk E. Karaca, Mohammad Elahinia
Mechanical Engineering Faculty Publications
Shape memory alloys (SMAs), such as Nitinol (i.e., NiTi), are of great importance in biomedical and engineering applications due to their unique superelasticity and shape memory properties. In recent years, additive manufacturing (AM) processes have been used to produce complex NiTi components, which provide the ability to tailor microstructure and thus the critical properties of the alloys, such as the superelastic behavior and transformation temperatures (TTs), by selection of processing parameters. In biomedical applications, superelasticity in implants play a critical role since it gives the implants bone-like behavior. In this study, a methodology of improving superelasticity in Ni-rich NiTi components …
A Total Life Cycle Approach For Developing Predictive Design Methodologies To Optimize Product Performance, Buddhika M. Hapuwatte, Ibrahim S. Jawahir
A Total Life Cycle Approach For Developing Predictive Design Methodologies To Optimize Product Performance, Buddhika M. Hapuwatte, Ibrahim S. Jawahir
Institute for Sustainable Manufacturing Faculty Publications
Sustainable products must be designed by considering how design decisions impact their total life cycle (TLC) sustainability content. Even more so important when designing products to incorporate the technological elements of sustainable manufacturing, the 6Rs (Reduce, Reuse, Recycle, Recover, Redesign and Remanufacture), to achieve Circular Economy (CE). This paper presents the preliminary work of an ongoing research project on developing a novel framework incorporating predictive models with TLC considerations. This unique approach develops and integrates models with associated risks, and optimizes for maximizing the sustainability benefits due to design decisions. Such predictive capability is extremely useful for process planning, where …
Process Sustainability Evaluation For Manufacturing Of A Component With The 6r Application, Ana E. Bonilla Hernández, Tao Lu, Tomas Beno, Claes Fredriksson, Ibrahim S. Jawahir
Process Sustainability Evaluation For Manufacturing Of A Component With The 6r Application, Ana E. Bonilla Hernández, Tao Lu, Tomas Beno, Claes Fredriksson, Ibrahim S. Jawahir
Institute for Sustainable Manufacturing Faculty Publications
Sustainability in manufacturing can be evaluated at product, process and system levels. The 6R methodology for sustainability enhancement in manufacturing processes includes: reduced use of materials, energy, water and other resources; reusing of products/components; recovery and recycling of materials/components; remanufacturing of products; and redesigning of products to utilize recovered materials/resources. Although manufacturing processes can be evaluated by their productivity, quality and cost, process sustainability assessment makes it a complete evaluation. This paper presents a 6R-based evaluation method for sustainable manufacturing in terms of specific metrics within six major metrics clusters: environmental impact, energy consumption, waste management, cost, resource utilization and …
Sustainable Production Through Balancing Trade-Offs Among Three Metrics In Flow Shop Scheduling, Amin Abedini, Wei Li, Fazleena Badurdeen, Ibrahim S. Jawahir
Sustainable Production Through Balancing Trade-Offs Among Three Metrics In Flow Shop Scheduling, Amin Abedini, Wei Li, Fazleena Badurdeen, Ibrahim S. Jawahir
Institute for Sustainable Manufacturing Faculty Publications
In sustainable manufacturing, inconsistencies exist among objectives defined in triple-bottom-lines (TBL) of economy, society, and environment. Analogously, inconsistencies exist in flow shop scheduling among three objectives of minimizing total completion time (TCT), maximum completion time (MCT), and completion time variance (CTV), respectively. For continuous functions, the probability is zero to achieve the objectives at their optimal values, so is it at their worst values. Therefore, with inconsistencies among individual objectives of discrete functions, it is more meaningful and feasible to seek a solution with high probabilities that system performance varies within the …
Designing And Redesigning Products, Processes, And Systems For A Helical Economy, Ryan Bradley, Ibrahim S. Jawahir
Designing And Redesigning Products, Processes, And Systems For A Helical Economy, Ryan Bradley, Ibrahim S. Jawahir
Institute for Sustainable Manufacturing Faculty Publications
The Circular Economy (CE) concept has promised to unlock trillions of dollars in business value while driving a significant reduction in the world’s resource consumption and anthropogenic emissions. However, CE mainly lives in ambiguity in the manufacturing domain because CE does not address the changes needed across all of the fundamental elements of manufacturing: products, processes, and systems. Conceptually, CE is grounded in the concept of closed-loop material flows that fit within ecological limits. This grounding translates into a steady state economy, a result that is not an option for the significant portion of the world living in poverty. Therefore, …
Rotary Friction Welding Versus Fusion Butt Welding Of Plastic Pipes – Feasibility And Energy Perspective, Ramsey F. Hamade, Tarek R. Andari, Ali H. Ammouri, Ibrahim S. Jawahir
Rotary Friction Welding Versus Fusion Butt Welding Of Plastic Pipes – Feasibility And Energy Perspective, Ramsey F. Hamade, Tarek R. Andari, Ali H. Ammouri, Ibrahim S. Jawahir
Institute for Sustainable Manufacturing Faculty Publications
According to the Plastics Pipe Institute, butt fusion is the most widely used method for joining lengths of PE pipe and pipe to PE fittings “by heat fusion” (https://plasticpipe.org/pdf/chapter09.pdf). However, butt-welding is not energy-cognizant from the point of view of a phase-change fabrication method. This is because the source of heating is external (heater plate). The initial heating and subsequent maintenance at relatively high temperature (above 200 C for welding of high-density polyethylene pipe) is energy intensive. Rotary friction welding, on the other hand focuses the energy where and when as needed because it uses electric motor to generate mechanical …