Engineering Commons^™

Exploring Renewable Energy Futures In Humboldt County Consistent With The Goals Of California’S Renewable Portfolio Standard, Amin M. Younes

Cal Poly Humboldt theses and projects

Humboldt County has abundant wind, solar, and biomass resources, but has made limited progress towards the state’s 2045 requirement of 100% clean electricity. A recently rejected onshore wind project showed that technically and economically viable projects can fall to social and political challenges, emphasizing the need for social considerations in renewable transitions. I therefore integrated community members’ preferences into modeling of RPS-consistent renewable energy scenarios in Humboldt County. My model suggests that offshore wind, utility-scale solar, distributed solar, and biomass power are technically and economically viable sources of significant local generation at varying costs.

In interviews with energy-engaged residents, I …

Cal Poly Microgrid Fixed Pv Array, Christopher L. Ewert, Justin R. Syracuse, Donald A. Syracuse, Jason M. Kehl

Mechanical Engineering

The Mechanical Engineering Department at California Polytechnic State University of San Luis Obispo would like an adjustable, fixed angle solar panel mount to help educate students on basic solar energy principles. Our team has developed a unique sawhorse design utilizing ideation techniques and design selection tools. The selected design allows for multiple panel adjustability and control of both azimuth and tilt angle. Safety concerns are addressed with action plans to mitigate risk. Concept prototypes to justify gearbox functionality and subsystem cohesion was utilized to reduce manufacturing issues. Manufacturing began in March 2020 and proceed through until the end of the …

Single Axis Solar Panel Tracking Mount Using Stepper Motor And Accelerometer Positional Control, Ezra Pramono

Electrical Engineering

Optimal solar panel systems rotate to track the sun, as solar panels operate at their maximum potential when the panel plane is completely normal to the sun’s rays. These tracking systems often using two axes of movement. This project is to design a system that will allow a solar panel to track the sun using only one rotational axis, which saves energy and uses fewer parts. The system tracks the entire range of the sun's motion and has positional feedback to allow control of the solar panel's angle. The position of the tracking system is controllable via an external computer. …

Design And Development Of Laboratory Single-Axis Pv Module Tracker, Helen A. Rice, Delaney Berger, Avishek Maitra

Electrical Engineering

Solar energy is an integral part of the renewable energy industry. Advanced solar farms actively track solar movement and update solar panel angles to maximize the system’s output power. Cal Poly boasts its own Solar Farm that features a single-axis tracking system. Single-axis tracking aims to get panels as close to perpendicular as possible given the panel arrangements and given the time of year. Single-axis tracking is a more robust measurement and tracking option. Single-axis tracking systems usually only have East-West panel arc movement, following the sun’s rotation. Dual-axis trackers have both East-West and North-South panel arc movements. Dual-axis systems …

Case Study: Google’S Unique Canopy Styled Construction, Ray A. Cuevas

Construction Management

In today’s rapidly changing world, builders are pushing to implement more sustainable practices and incorporate innovative techniques to integrate green practices into their structures. One of the latest examples of this push towards sustainability is seen in Google’s new headquarters, Charleston East located in Mountain View, California. Combining their widely known mission to provide a positive work environment for their employees with their passion to be more environmentally friendly, Google has set out to create a Living Building with LEED Platinum certification. In order to accomplish this Google has collaborated with Bjarke Ingels Group, Heatherwick Studio, and Hathaway Dinwiddie. The …

Proposal For A New Construction Management Emerging Trends Elective Course: Principles Of Solar Construction, Nicholas J. Gairaud

Construction Management

California Polytechnic State University (Cal Poly) prides itself on its learn by doing motto which encourages students to participate in hands-on projects and choose elective courses about topics they are interested in. This project is an outline for an Emerging Trends elective course that aims to fill the gap between what students learn in school and what they see in the field. Over the past decade, the use of on-site solar energy generated has skyrocketed in the commercial and residential sectors. The purpose of this course is to inform students about solar requirements and to lay the groundwork for students …

An Investigation Of Diode Failure, Nicholas James Adams

Physics

Solar electricity can be used to cheaply cook food and charge electronic devices. We investigate the viability of using diodes as heating elements for insulated solar electric cooking (ISEC). In addition, information on designing and constructing ISEC compatible phone chargers and rechargeable LED lighting systems is included.

Neca Ghana Project, Michael T. Klee

Construction Management

Cal Poly’s motto is, “Learn by Doing" and for Cal Poly’s NECA Chapter, this isn’t simply a motto, but a directive for proactive change. For my senior project I will be leading the Cal Poly NECA chapter in the design, pre- fabrication and construction of a 5-7kw solar array, community center, ice production room and technology room in the remote fishing village of Agbokpa, Ghana. The solar array will power multiple industrial DC freezers, high efficiency LED lighting and charging stations while additionally powering water filtration and irrigation systems. Like many other fishing villages around the world, Agbokpa has no …

Dual-Axis Solar Tracker, Bryan Kennedy

All Undergraduate Projects

Renewable energies, and fuels that are not fossil fuel-based, are one of the prolific topics of debate in modern society. With climate change now becoming a primary focus for scientists and innovators of today, one of the areas for the largest amount of potential and growth is that of the capturing and utilization of Solar Energy. This method involves using a mechanical system to track the progression of the sun as it traverses the sky throughout the day. A dual-axis solar tracker such as the one designed and built for this project, can follow the sun both azimuthally and in …

Microgrid-Enabled Reactive Power Support To Enhance Grid Economics, Sarhan Hasan

Electronic Theses and Dissertations

Reactive power plays an essential role in voltage control and stability in electric power systems. Various Volt/VAR techniques are utilized in electric power systems to maintain the voltage profile within defined acceptable limits and accordingly provide reliability and stability. Reactive power has been commonly generated through large-scale synchronous generators or distributed capacitor banks to provide proper transmission and distribution level system management, however, reactive power can be further used as an effective means to reduce total system operation cost. In this dissertation, an optimal reactive power model is proposed to determine the optimal nodal reactive powers that result in the …

Increasing Access To Pv Technology Through Sustainable Racking: A Review Of Existing Literature And Ground Mounted Fixed Tilt Designs, And What Can Be Done Next, Parijata Prabhakara

Dissertations, Master's Theses and Master's Reports

There is a lack of literature on the structural balance of systems (BOS), also called racking, for ground mount, fixed-tilt solar PV systems. Literature that exists discusses mostly rooftop racking and installations, additional wind loading, and weight considerations imposed on roofs, and little guidance is provided in building codes. The lack of peer-reviewed guidance on design requirements for domestic and large-scale application solar PV racking systems leaves most consumers relying on expensive, patented, off-the-shelf hardware. As PV cell technology and module costs have improved, we can start to focus on PV BOS improvements (particularly racking) and move towards sustainable designs …

Solar-Powered Exploration Of The Venus Atmosphere, Marc Migliozzi, Cory Everman, Rebecca Buerhle, Umar Muhammed, Steven Abbate, Chase Champagne

Williams Honors College, Honors Research Projects

The objective of this study was to design a solar powered, unmanned aircraft to orbit in the upper Venus atmosphere and search for signs of alien life. Topics of flight conditions, signs of life, basic mission plan, source of power, design process, instrumentation, and final designs are covered. Solar energy is ideal for this type of mission because it is the only reliable and abundant energy source accessible for long term space travel. The target altitude, being 60 to 70 km, has winds of up to 95 m/s. The aircraft will need to remain stable under such conditions. Due to …

Pv Mppt Water Pump Controller, Jacob R. Lamkin

Electrical Engineering

The intention of this project is to create a low cost way to extract the maximum useful power from a PV module to power a water pump. This approach will yield maximum financial and technical accessibility for end users. The project was successful in powering a water pump from a PV module as desired, and the microcontroller driven control circuitry was capable of finding and maintaining operation at the maximum power point of the PV module. Due to the low performance of the buck converter used in this project, this approach was not as efficient as desired and would require …

Software-Defined Infrastructure For Iot-Based Energy Systems, Stephen Lee

Doctoral Dissertations

Internet of Things (IoT) devices are becoming an essential part of our everyday lives. These physical devices are connected to the internet and can measure or control the environment around us. Further, IoT devices are increasingly being used to monitor buildings, farms, health, and transportation. As these connected devices become more pervasive, these devices will generate vast amounts of data that can be used to gain insights and build intelligence into the system. At the same time, large-scale deployment of these devices will raise new challenges in efficiently managing and controlling them. In this thesis, I argue that the IoT …

Modeling And Testing Powerplant Subsystems Of A Solar Uas, Luke J. Bughman

Master's Theses

In order to accurately conduct the preliminary and detailed design of solar powered Unmanned Aerial Systems (UAS), it is necessary to have a thorough understanding of the systems involved. In particular, it is desirable to have mathematical models and analysis tools describing the energy income and expenditure of the vehicle. Solar energy income models may include available solar irradiance, photovoltaic array power output, and maximum power point tracker efficiency. Energy expenditure models include battery charging and discharging characteristics, propulsion system efficiency, and aerodynamic efficiency. In this thesis, a series of mathematical models were developed that characterize the performance of these …

All Season Heat Pipe System., Adrienne Marie Parsons

Electronic Theses and Dissertations

Our energy choices impact the earth’s natural systems and climate. As this becomes increasingly important, the need for decreasing our energy usage is essential. Conventional passive solar systems can significantly reduce the heating load. Similarly, passive ambient energy systems, such as ventilation and sky radiation, can reduce cooling loads. However, the integration of passive heating and cooling systems in the same building and the benefits of actively controlling these otherwise passive systems to maximize annual energy savings has largely been unexplored. This study first evaluates the building cooling capacity of sky radiation, which was previously identified to have the greatest …

Solar Shingle Experience: Evaluating Their Value In Today's Market, Kevin R. Church

Construction Management

Solar technology has been on the rise in popularity in recent years and we are starting to see more of it across the US. As the technology and capabilities of photovoltaic (PV) cells advance, there has been an increase in the number of different product designs that incorporate PV cells. Building integrated Photovoltaic (BIPV) products have been some of the most popular introduced to the market. In the last five years, one of these BIPV products, a solar system integrated into the roofing shingles of residential homes has been sensationalized and, according to a California solar installer, that has encouraged …

Viability Of Solar Power On Jobsites, Braden J. Levalley

Construction Management

The use of solar energy has slowly been on the rise over the past few decades, the full potential of solar energy has not been realized in the realm of construction. Solar power in construction has been slow to catch on, as many of the upfront costs associated with solar power has created a feeling that investing in such systems will ultimately not be worth the investment. This paper attempts to address the issues of upfront costs, the willingness for contractors to invest in renewable energy both now and in the future, and will also identify possible uses for solar …

Logistics Of Construction In Agbokpa, Ghana, Fletcher David Podosek

Construction Management

In August of 2019, three Cal Poly CM students will travel to the remote fishing village of Agbokpa in Ghana. Our project is to install a water filtration system that will create potable water for the villagers that currently have to walk miles to obtain clean water. We will be laying nearly 1000 ft of pipe, installing a solar powered pump, and building a water filtration system hours away from any electricity. A project of this type requires a great deal of logistical planning in order to ensure that all aspects of the project is thought of and planned for. …

Insulated Solar Electric Cooker With Phase Change Thermal Storage Medium, Justin Brett Unger, Nathan Robert Christler, Matthew Weeman, Marcus Edward Strutz

Mechanical Engineering

This final design review document outlines the senior design project carried out by a team of four mechanical engineering students at the California Polytechnic State University – San Luis Obispo under the sponsorship of Dr. Peter Schwartz of the Cal Poly Physics department. The aim of this project was to improve upon the design of previously developed Insulated Solar Electric Cookers (ISECs) by adding a thermal storage system to allow for quicker cook times and the ability to cook food at non-peak solar hours. The team’s goal was to develop a working prototype utilizing a phase change medium as the …

Vaccine Cooler For The Global Poor, Benjamin J. Larson, Cooper E. Gibson, Eilbron Younan, Cody R. Volk

Mechanical Engineering

Cal Poly physics professors Peter Schwartz and Nathan Heston approached the Solar Freeze team with the problem that remote communities in Africa have limited access to modern-day medicine or vaccines. They suggested that we try and design a cooling device that can keep vaccines cold for multiple days at a time while the medicine is transported to remote villages. Currently, there are vaccine cooler products on the market, but most of them are very expensive or lack portability. Peter and Nate have tasked the Solar Freeze team to come up with a less expensive solution that is also portable and …

The Eco-Smart Can V2.0, Darack B. Nanto

Electronic Theses and Dissertations

On a scorching summer day in 2015, a campus maintenance worker was observed emptying a trash bin. Upon closer observation, it was noted that the bin was not full; in fact, it was less than one third full. There were other bins that were full and needed to be emptied urgently. It was confusing and problematic to see that bins that needed more attention were not prioritized. After extended research, it was found that maintenance operates on daily routes to pick up trash at designated times, regardless of the level of trash in the bins. Therefore, to tackle this issue, …

Ares Cleaning System, Andy Sagers, John Cunningham, Peter Greig, Jack Glynn

Mechanical Engineering

In this Final Design Review, the team outlines the general scope of the ARES Cleaning System project and the final design direction chosen and built. This team consists of a group of four mechanical engineering students who have been tasked with designing and manufacturing an autonomous ARES cleaning system to help their sponsor, Fracsun, better track soiling losses measured at large solar arrays. They designed, conceptualized, manufactured, and tested throughout the project as they looked to create a final, functioning product. In creating this Final Design Review, they have identified how the product will perform the desired functions and what …

Benefit-Cost Analysis For The Supply Of Renewable Electric Energy In Zones Not Interconnected Case Study Miraflores Boyacá, David Alejandro Barrera López

Ingeniería Civil

No abstract provided.

Solar Powered Atmospheric Water Generation, Ben Conser

Master’s Theses

Several atmospheric water generation (AWG) system configurations were analyzed to determine the feasibility of AWG as a method to combat water stress. In order to best combat water stress, AWG must be implemented in such a way which minimizes the energetic and monetary cost of water production. Thermodynamic and economic analyses were used to compare the performance of several AWG system configurations. Metrics such as specific energy consumption (SEC) and levelized cost of water (LCOW), which measure the energetic and monetary cost of water production respectively, were used to compare each system. Using this approach, the optimal system configuration was …

Solar+ Microgrid Costs At Gas Station And Convenience Stores In The State Of California, Thalia Quinn

Cal Poly Humboldt theses and projects

This project estimates the capital costs for Solar+ microgrids for the year 2018 and forecasted out to 2030. Solar+ systems include the use of battery energy storage, solar energy, electric vehicle chargers and control systems to manage energy consumption and generation for a single building and provide islanded “microgrid” features. The capital cost includes estimates for the components: DER technologies (battery, solar PV and EV charging stations), controls (programming and hardware), and integration costs (switchgear, engineering, permitting and site work). Methods used to estimate each cost included assessing historical and projected costs for each of the components.

Five Solar+ scenarios …

Solar Irradiance Microforecasting, Austin Jeffrey Fite, Sara Naseem Kipps

Computer Engineering

In late winter quarter 2018 the University of New Mexico and Microgrid Labs provided the Cal Poly Electrical Engineering department with their prototype Solar Irradiance Microforecasting (SIMF) hardware. This hardware was provided to the University under the lone condition that data collected with it would be returned to Microgrid Labs to train their weather model. The goal of this senior project was to take the provided hardware and software and make it usable for students in the Cal Poly Electrical and Computer Engineering departments to hack and expand. The end goal with the hardware is near term cloud and weather …

Power Optimization Of Solar Powered Standalone Wireless Sensor System, Rajan Amatya

Masters Theses

Wireless sensor systems are common in applications where harsh environmental conditions or remote locations make it difficult to run wires. Having these sensor systems self-powered is essential as it is difficult for battery replacement. Using solar as an alternative source of energy can be a medium to charge the battery in such scenarios. With an increasing number of portable devices powered by battery; more and more research is focused on low-power design technique. For this thesis, a microcontroller (Texas Instruments MSP432) was used along with a digital sensor (Bosch BME280) to provide temperature, pressure and humidity information, and Wi-Fi module …

Grid-Tied Solar System, Virginia Yan

Electrical Engineering

Distribution level solar energy generation has gained importance and popularity, because it helps create a sustainable electricity system while reducing the harmful environmental impacts our current power systems have. This project proposes an alternative energy source, a laboratory-scale grid-connected photovoltaic system. A KC120-1 solar panel produces 120 Watts maximum. A grid-tied solar power inverter does DC-to-AC conversion and minimizes energy transfer losses. The inverter also has an anti-islanding feature, which senses a power outage and prevents back-feeding through isolating the circuit. The circuit breakers isolate electrical components and protect the circuit. Schweitzer Engineering Laboratories SEL-751 feeder protection relay and SEL-735 …

Application Of Silicon Nanohair Textured P-N Junctions In A Photovoltaic Device, Michael Small

Electronic Theses and Dissertations

The goal of this project is to design and develop a fabrication process for a silicon photovoltaic device which incorporates a nanohair textured p-n junction. The silicon nanowires are etched into a silicon wafer, comprising an epitaxial p-layer on n-substrate, via metal-assisted chemical etching (MACE). The resulting nanowires contain p-n junctions that lie along the length of the vertical nanowires. This construct has the potential to increase the optical bandwidth of a silicon photovoltaic device by allowing a greater amount of short wavelength light to reach the junction. In addition, the MACE method of nanofabrication has the potential for decreasing …