Engineering Commons^™

Model Based Force Estimation And Stiffness Control For Continuum Robots, Vincent A. Aloi

Doctoral Dissertations

Continuum Robots are bio-inspired structures that mimic the motion of snakes, elephant trunks, octopus tentacles, etc. With good design, these robots can be naturally compliant and miniaturizable, which makes Continuum Robots ideal for traversing narrow complex environments. Their flexible design, however, prevents us from using traditional methods for controlling and estimating loading on rigid link robots.

In the first thrust of this research, we provided a novel stiffness control law that alters the behavior of an end effector during contact. This controller is applicable to any continuum robot where a method for sensing or estimating tip forces and pose exists. …

Exploration Of The Stability Of Multicomponent Metal Halide Perovskites Utilizing Automated, High-Throughput Methods And Machine Learning, Katherine N. Higgins

Doctoral Dissertations

Because of their outstanding optoelectronic properties and low-cost, solution-based fabrication, metal halide perovskites (MHP) are appealing candidates for a variety of applications, such as photovoltaics, light-emitting diodes, photodetectors, and ionizing radiation detectors. However, concerns of this material’s stability in pure or device-integrated form under external stimuli, such as light, humidity, oxygen, and heat, have prohibited the widespread utilizations of MHPs. It is well established that alloying can lessen detrimental effects of these factors. To date, a small portion of alloyed compositions have been investigated compared to the thousands of possible perovskites proposed theoretically. Conventional approaches to materials discovery and optimization, …

Autonomous Material Refill For Swarm 3d Printing, William C. Jones

Mechanical Engineering Undergraduate Honors Theses

3D printing currently offers robust and cheap rapid prototyping solutions. While standard 3D printing remains at the periphery of mass production, the technology serves as a starting point for the development of swarm manufacturing. Since swarm manufacturing is predicated upon autonomy, swarm technology companies such as AMBOTS are seeking to minimize human involvement in the swarm’s functions. At present, the 3D printing swarm consists of the printers, a transporter which can take them between job sites, and the floor tiles which provide power and support the build surfaces. To add to this ecosystem, this project is focused on the design …

Dynamic Maneuvers For Satellite On-Orbit Servicing Utilizing Novel Continuum Robotics: Development & Experimentation, Nathan Dalton

Masters Theses

Robotic on-orbit servicing is a developing technology that seeks to increase the longevity and repairability of faulty or aging resident space objects. In this research, the development of a flexible continuum manipulator for a small satellite system that performs low-complexity on-orbit servicing or debris removal is presented. Derivations of manipulator kinematics are described in detail, a non-linear control scheme has been developed, and the accuracy and servicing applications for the prototype are evaluated and discussed. The manipulator has been tested on an air-bearing dynamics simulator, and the results are extensively analyzed. System recommendations and future work suggestions are presented.

Water Based Soil Fluidization Using A Soft Eversion Robot, James E. Hand

Doctoral Dissertations and Master's Theses

Soft robotics, a form of robotics that incorporates nonrigid components, continues to grow in scope, system design, and application. A recent addition to this field is the Vine Robot platform, a bio-inspired robot designed by Stanford University in 2017. Its method of movement, known as eversion, closely resembles the way that a vine grows along a tree, giving it its name. The focus of this research was to take its proven abilities of underwater vine-like movement and soil fluidization, a process where granular materials are converted from a solid-like state to a fluid-like state, to create an underwater eversion robot …

Robot Learning From Human Observation Using Deep Neural Networks, Michael Elachkar

Electronic Theses and Dissertations

Industrial robots have gained traction in the last twenty years and have become an integral component in any sector empowering automation. Specifically, the automotive industry implements a wide range of industrial robots in a multitude of assembly lines worldwide. These robots perform tasks with the utmost level of repeatability and incomparable speed. It is that speed and consistency that has always made the robotic task an upgrade over the same task completed by a human. The cost savings is a great return on investment causing corporations to automate and deploy robotic solutions wherever feasible.

The cost to commission and set …

Learning Robot Motion From Creative Human Demonstration, Charles C. Dietzel

Theses and Dissertations

This thesis presents a learning from demonstration framework that enables a robot to learn and perform creative motions from human demonstrations in real-time. In order to satisfy all of the functional requirements for the framework, the developed technique is comprised of two modular components, which integrate together to provide the desired functionality. The first component, called Dancing from Demonstration (DfD), is a kinesthetic learning from demonstration technique. This technique is capable of playing back newly learned motions in real-time, as well as combining multiple learned motions together in a configurable way, either to reduce trajectory error or to generate entirely …

A Water-Surface Self-Leveling Landing Platform For Small-Scale Uavs, Mbidi Santos

Electronic Theses and Dissertations

Because many of the most widely used UAVs, such as the Vertical Take-Off and Landing (VTOL), cannot land securely on sloped or fast-changing surfaces, there is a need to design better deployment and landing stations. This document proposes an approach to design a water-surface self-leveling landing platform by implementing the best concept to be used as a safe ground for UAVs to land and deploy on open waters. After conceptualizing multiple design ideas, these options were laid out in a decision matrix with four criteria: degrees of freedom, mechanical complexity, manufacturing, and cost. The chosen concept was the spherical parallel …

Developing Reactive Distributed Aerial Robotics Platforms For Real-Time Contaminant Mapping, Joshua Ashley

Theses and Dissertations--Electrical and Computer Engineering

The focus of this research is to design a sensor data aggregation system and centralized sensor-driven trajectory planning algorithm for fixed-wing aircraft to optimally assist atmospheric simulators in mapping the local environment in real-time. The proposed application of this work is to be used in the event of a hazardous contaminant leak into the atmosphere as a fleet of sensing unmanned aerial vehicles (UAVs) could provide valuable information for evacuation measures. The data aggregation system was designed using a state-of-the-art networking protocol and radio with DigiMesh and a process/data management system in the ROS2 DDS. This system was tested to …

Human-Machine Collaboration In Healthcare Innovation, Breeze Fenton

Electronic Theses and Dissertations

Almost every individual has visited a healthcare institute, whether for an annual checkup, surgery, or a nursing home. Ensuring healthcare institutes are using human-machine collaboration systems correctly can improve daily operations. A maturity assessment and an implementation plan have been developed to help healthcare institutes monitor the human-machine collaboration systems. A maturity model, the Smart Maturity Model for Health Care (SMMHC), is a tool designed for maturity assessment. A four-step implementation plan was also created in this research. The implementation plan views the maturity of the institute and develops a strategy on how to improve it. The research utilized Integrated …

Factors Influencing The Effectiveness Of Managing Human–Robot Teams, Theodore B. Terry

Walden Dissertations and Doctoral Studies

Certain factors can influence the capabilities of a robot–human team by affecting their social and behavioral dynamics in a work environment. But these factors were not known due to the progressive nature of human–robot partnerships and a lack of peer-reviewed literature on the topic. This e-Delphi study aimed to identify and understand these unknown influential factors based on the participants’ insights. The overarching research question asked about the need to determine factors that might influence the effectiveness of managing human-robot teams. The basis for the conceptual framework for this study was the theory of communication used in organizational management. Twelve …

Top-Down & Bottom-Up Approaches To Robot Design, Dylan Michael Covell

Graduate Theses, Dissertations, and Problem Reports

This thesis presents a study of different engineering design methodologies and demonstrates their effectiveness and limitations in actual robot designs. Some of these methods were blended together with focus on providing an easily interpreted project design flow while implementing more bottom-up, or feedback, elements into the design methodology. Typically design methods are learned through experience, and design taught in academia aims to shape and formalize previous experience. Usually, inexperienced engineers are taught approaches resembling the Verein Deutscher Ingenieure (VDI) 2221 process. This method presented by the Association of German Engineers in 2006 is regarded as the general system design process. …

A Study Of Reduced Activation Ferritic Martensitic Metal Core Wire For Wire Arc Additive Manufacturing, Alexander L. Reichenbach

Electronic Theses and Dissertations

This study seeks to determine the technical feasibility of fabricating reduced activation ferritic martensitic (RAFM) steel parts, using a wire arc additive manufacturing (WAAM) process. The WAAM process, manufactures a part by depositing layers of metal onto a substrate to build a large scale near net shape part. RAFM alloy steels are next generation steels designed to resist radiation effects in the radiation intense working environments, such as nuclear reactors. To achieve this, process development and testing to design the WAAM production process with the custom RAFM filler wire was carried out. Several welding waveform modes were tested, and it …

Amygdala Modeling With Context And Motivation Using Spiking Neural Networks For Robotics Applications, Matthew Aaron Zeglen

Browse all Theses and Dissertations

Cognitive capabilities for robotic applications are furthered by developing an artificial amygdala that mimics biology. The amygdala portion of the brain is commonly understood to control mood and behavior based upon sensory inputs, motivation, and context. This research builds upon prior work in creating artificial intelligence for robotics which focused on mood-generated actions. However, recent amygdala research suggests a void in greater functionality. This work developed a computational model of an amygdala, integrated this model into a robot model, and developed a comprehensive integration of the robot for simulation, and live embodiment. The developed amygdala, instantiated in the Nengo Brain …

A Human-Embodied Drone For Dexterous Aerial Manipulation, Dongbin Kim

UNLV Theses, Dissertations, Professional Papers, and Capstones

Current drones perform a wide variety of tasks in surveillance, photography, agriculture, package delivery, etc. However, these tasks are performed passively without the use of human interaction. Aerial manipulation shifts this paradigm and implements drones with robotic arms that allow interaction with the environment rather than simply sensing it. For example, in construction, aerial manipulation in conjunction with human interaction could allow operators to perform several tasks, such as hosing decks, drill into surfaces, and sealing cracks via a drone. This integration with drones will henceforth be known as dexterous aerial manipulation.

Our recent work integrated the worker’s experience into …

Factors Influencing Service Robot Adoption: A Comparative Analysis Of Hotel-Specific Service Robot Acceptance Models, Ying Dong

UNLV Theses, Dissertations, Professional Papers, and Capstones

The market for service robots is expected to expand significantly owing to the increasing relevance of service automation under the outbreak of the COVID-19 pandemic. Despite the growing managerial interest in robotic applications in the hotel industry, current robotic research has been mostly conceptual with limited robot data on hand. In light of this issue, this paper will conduct a comparative analysis of hotel-specific service robot acceptance models between the Service Robot Acceptance Model (sRAM) and the Service Robot Integration Willingness (SRIW) framework. By identifying key elements of each service robot acceptance model, this paper puts an emphasis on investigating …

Trajectory Generation For A Multibody Robotic System: Modern Methods Based On Product Of Exponentials, Aryslan Malik

Doctoral Dissertations and Master's Theses

This work presents several trajectory generation algorithms for multibody robotic systems based on the Product of Exponentials (PoE) formulation, also known as screw theory. A PoE formulation is first developed to model the kinematics and dynamics of a multibody robotic manipulator (Sawyer Robot) with 7 revolute joints and an end-effector.

In the first method, an Inverse Kinematics (IK) algorithm based on the Newton-Raphson iterative method is applied to generate constrained joint-space trajectories corresponding to straight-line and curvilinear motions of the end effector in Cartesian space with finite jerk. The second approach describes Constant Screw Axis (CSA) trajectories which are generated …

Collaborative Human-Machine Interfaces For Mobile Manipulators., Shamsudeen Olawale Abubakar

Electronic Theses and Dissertations

The use of mobile manipulators in service industries as both agents in physical Human Robot Interaction (pHRI) and for social interactions has been on the increase in recent times due to necessities like compensating for workforce shortages and enabling safer and more efficient operations amongst other reasons. Collaborative robots, or co-bots, are robots that are developed for use with human interaction through direct contact or close proximity in a shared space with the human users. The work presented in this dissertation focuses on the design, implementation and analysis of components for the next-generation collaborative human machine interfaces (CHMI) needed for …

Additive Manufacturing Using Robotic Manipulators, Fdm, And Aerosol Jet Printers., Alexander Curry

Electronic Theses and Dissertations

Additive manufacturing has created countless new opportunities for fabrication of devices in the past few years. Advances in additive manufacturing continue to change the way that many devices are fabricated by simplifying processes and often lowering cost. Fused deposition modeling (FDM) is the most common form of 3D printing. It is a well-developed process that can print various plastic materials into three-dimensional structures. This technology is used in a lot of industries for rapid prototyping and sometimes small batch manufacturing. It is very inexpensive, and a prototype can be created in a few hours, rather than days. This is useful …

Learning State-Dependent Sensor Measurement Models To Improve Robot Localization Accuracy, Troi André Williams

USF Tampa Graduate Theses and Dissertations

This dissertation proposes a novel method called state-dependent sensor measurement models (SDSMMs). Such models dynamically predict the state-dependent bias and uncertainty of sensor measurements, ultimately improving fundamental robot tasks such as localization. In our first investigation, we introduced the state-dependent sensor measurement model framework, described their properties, stated the input and output of these models, and described how to train them. We also explained how to integrate such models with an Extended Kalman Filter and a Particle Filter, two popular robot state estimation algorithms. We validated the proposed framework through a series of localization tasks. The results showed that our …

Robot Area Coverage Path Planning In Aquatic Environments, Nare Karapetyan

Theses and Dissertations

This thesis is motivated by real world problems faced in aquatic environments. It addresses the problem of area coverage path planning with robots - the problem of moving an end-effector of a robot over all available space while avoiding existing obstacles. The problem is considered first in a 2D space with a single robot for specific environmental monitoring operations, and then with multi-robot systems — a known NP-complete problem. Next we tackle the coverage problem in 3D space - a step towards underwater mapping of shipwrecks or monitoring of coral reefs.

The first part of this thesis leverages human expertise …

Data-Driven Learning For Robot Physical Intelligence, Leidi Zhao

Dissertations

The physical intelligence, which emphasizes physical capabilities such as dexterous manipulation and dynamic mobility, is essential for robots to physically coexist with humans. Much research on robot physical intelligence has achieved success on hyper robot motor capabilities, but mostly through heavily case-specific engineering. Meanwhile, in terms of robot acquiring skills in a ubiquitous manner, robot learning from human demonstration (LfD) has achieved great progress, but still has limitations handling dynamic skills and compound actions. In this dissertation, a composite learning scheme which goes beyond LfD and integrates robot learning from human definition, demonstration, and evaluation is proposed. This method tackles …

Snr: Software Library For Introductory Robotics, Spencer F. Shaw

Master's Theses

This thesis introduces "SNR," a Python library for programming robotic systems in the context of introductory robotics courses. Greater demand for roboticists has pressured educational institutions to expand robotics curricula. Students are now more likely to take robotics courses earlier and with less prior programming experience. Students may be attempting to simultaneously learn a systems programming language, a library API, and robotics concepts. SNR is written purely in Python to present familiar semantics, eliminating one of these learning curves. Industry standard robotics libraries such as ROS often require additional build tools and configuration languages. Students in introductory courses frequently lack …

Variable Autonomy Assignment Algorithms For Human-Robot Interactions., Christopher Kevin Robinson

Electronic Theses and Dissertations

As robotic agents become increasingly present in human environments, task completion rates during human-robot interaction has grown into an increasingly important topic of research. Safe collaborative robots executing tasks under human supervision often augment their perception and planning capabilities through traded or shared control schemes. However, such systems are often proscribed only at the most abstract level, with the meticulous details of implementation left to the designer's prerogative. Without a rigorous structure for implementing controls, the work of design is frequently left to ad hoc mechanism with only bespoke guarantees of systematic efficacy, if any such proof is forthcoming at …

Motion And Emotion Estimation For Robotic Autism Intervention., Jacob M Berdichevsky

Electronic Theses and Dissertations

Robots have recently emerged as a novel approach to treating autism spectrum disorder (ASD). A robot can be programmed to interact with children with ASD in order to reinforce positive social skills in a non-threatening environment. In prior work, robots were employed in interaction sessions with ASD children, but their sensory and learning abilities were limited, while a human therapist was heavily involved in “puppeteering” the robot. The objective of this work is to create the next-generation autism robot that includes several new interactive and decision-making capabilities that are not found in prior technology. Two of the main features that …

Object Manipulation With Modular Planar Tensegrity Robots, Maxine Perroni-Scharf

Dartmouth College Undergraduate Theses

This thesis explores the creation of a novel two-dimensional tensegrity-based mod- ular system. When individual planar modules are linked together, they form a larger tensegrity robot that can be used to achieve non-prehensile manipulation. The first half of this dissertation focuses on the study of preexisting types of tensegrity mod- ules and proposes different possible structures and arrangements of modules. The second half describes the construction and actuation of a modular 2D robot com- posed of planar three-bar tensegrity structures. We conclude that tensegrity modules are suitably adapted to object manipulation and propose a future extension of the modular 2D …

Robot Object Detection And Locomotion Demonstration For Eecs Department Tours, Bryson Howell, Ethan Haworth, Chris Mobley, Ian Mulet

Chancellor’s Honors Program Projects

No abstract provided.

Design Of A Cable-Driven Manipulator For Large-Scale Additive Manufacturing, Phillip Chesser

Masters Theses

Additive manufacturing of concrete is a growing field of research, yet current motion platforms do not offer viable routes towards large scale deployable systems. This thesis presents the design and analysis of a novel cable-driven robot for use in large scale additive manufacturing. The system developed, termed SkyBAAM, is designed to be easily deployable to a construction site for on-site additive manufacturing of buildings and other large structures. The design philosophy behind this system is presented. Analysis of this system first explores the kinematics, and stiffness as a function of cable tension. Analysis of the workspace and singularities is also …

A Study Of Deep Reinforcement Learning In Autonomous Racing Using Deepracer Car, Mukesh Ghimire

Honors Theses

Reinforcement learning is thought to be a promising branch of machine learning that has the potential to help us develop an Artificial General Intelligence (AGI) machine. Among the machine learning algorithms, primarily, supervised, semi supervised, unsupervised and reinforcement learning, reinforcement learning is different in a sense that it explores the environment without prior knowledge, and determines the optimal action. This study attempts to understand the concept behind reinforcement learning, the mathematics behind it and see it in action by deploying the trained model in Amazon's DeepRacer car. DeepRacer, a 1/18^th scaled autonomous car, is the agent which is trained …

Distance-Based Formation Control Using Decentralized Sensing With Infrared Photodiodes, Steven Williams

LSU Master's Theses

This study presents an onboard sensor system for determining the relative positions of mobile robots, which is used in decentralized distance-based formation controllers for multi-agent systems. This sensor system uses infrared photodiodes and LEDs; its effective use requires coordination between the emitting and detecting robots. A technique is introduced for calculating the relative positions based on photodiode readings, and an automated calibration system is designed for future maintenance. By measuring the relative positions of their neighbors, each robot is capable of running an onboard formation controller, which is independent of both a centralized controller and a global positioning-like system (e.g., …