Engineering Commons^™

Evaluation Of Digital Twin Approaches For Thermal Modeling And Energy Optimization For Existing Buildings, Jason Bastie Muermann

Theses and Dissertations

Residential, commercial, and industrial building sectors in the United States were responsible for 42% of the nation’s consumption of 100.2 quadrillion BTUs of energy in 2019 [1]. 80% of the nation’s energy is sourced from fossil fuels, including coal, natural gas, and petroleum. Fossil fuels are known contributors to carbon emissions and climate change, making energy reduction vital. Consequently, New Jersey Department of Military and Veterans Affairs (NJDMAVA) is tasked with evaluating energy consumption and efficiency in all New Jersey Army National Guard (NJARNG) facilities, as mandated by TAG Policy Letter 18-5, Executive Order 13990, and the Energy Independence and …

The Influence Of Porous Media Heterogeneity On Smouldering Remediation, Jiahao Wang

Electronic Thesis and Dissertation Repository

Smouldering remediation is a promising technique for destroying organic contaminants in soil. Forced airflow is vital to supporting the smouldering reaction and to propagate it through the contaminated zone. This research focuses on investigating the effects of permeability heterogeneity on smouldering. A series of unique column experiments, combined with numerical model simulations, were conducted. The results suggest that smouldering can successfully propagate through layers in series despite more than a 1000:1 permeability contrast. However, extinction can occur in the finer layer when smouldering propagates through layers in parallel with a permeability ratio above 3:1. Extinction may occur due to insufficient …

An Evaluation Of Ground-Freezing Methods In The Zone Of Discontinuous Permafrost, Northwest Territories, Elzbieta Mastej Ms

Theses and Dissertations (Comprehensive)

Northwestern Canada is one of the most rapidly warming regions on Earth. The southern limit of the discontinuous permafrost zone is highly sensitive to small climatic fluctuations and presently experiencing a rapid landscape change due to accelerated permafrost thaw, which is further exacerbated by anthropogenic disturbances such as seismic exploration. Recent research has begun to examine both natural and mechanical approaches to minimize permafrost loss, although the utility of such methods in peatland environments is not well understood. This study explored the efficiency of natural and artificial ground cooling processes in a peatland environment by evaluating snow exclusion and thermosyphon …

Selecting The Most Effective Energy Modeling Tool Based On A Project Requirement, Sodiq Akande

Electronic Theses and Dissertations

Building energy usage can be derived and controlled by performing building energy modeling. BEM can be performed using numerous software tools such as DesignBuilder, OpenStudio, EnergyPlus etc. These modeling tools can be sorted into three different modeling categories: Black-box, Gray-box and White-box. It is important for a modeler to be able to quickly select the proper tool from the proper category to meet the need of the project. To validate the method of categorizing tools, the three models generated using tools from each category and the modeling outputs required were compared. Each model was designed to estimate the amount of …

The Development And Numerical Modelling Of A Representative Elemental Volume For Packed Sand, Ashraf Thabet

Electronic Thesis and Dissertation Repository

The motivation of this thesis is the development of simple microscopic-scale model (representative elemental volume; REV) that can be used to conduct flow and heat transfer simulations from which closure coefficients can be established for the volume-averaged transport equations for porous media (packed bed). The thesis provides a brief introduction to the computational technique adopted for the geometric generation of the REV (YADE), followed by a parametric study undertaken to reveal the minimum number of particles inside the REV that are required to mimic the appropriate physics. Additional analysis was conducted with the goal of determining the influence of deviation …

Simulated Dynamics Of Soil Water And Pore Vapor In A Semi-Arid Sandy Ecosystem, Shohreh Pedram

Civil & Environmental Engineering Theses & Dissertations

Understanding dynamics of soil water content (SWC) and pore air relative humidity (RHpa), as influenced by wetting-drying cycles, is crucial for sustaining fragile ecosystems of desert lands across the world and needed for improving the prediction accuracy of global climate change. However, to date, such an understanding is still incomplete. The objective of this dissertation was to examine such dynamics at a typical desert site within the Horqin Sandy Land, located in Mongolian Plateau of north China. The examination was done by using a HYDRUS-1D computer simulation model and the continuous sensor-based soil water data for two calendar years. HYDRUS-1D …

Modeling Atypical Building Use With Commercially Available Building Simulation Software, Sarah E. Schanck

Theses and Dissertations

National Guard armories are audited to provide recommendations for future energy reduction measures. The annual energy consumption of a New Jersey National Guard Armories cannot be modeled directly with commercially available building simulation software, due to discrepancies between the modeling capabilities of the software and the reality of the armory. A building simulation software, eQUEST, was chosen for use in this project. Discrepancies between eQUEST inputs and reality were identified and correction factors developed to minimize the effect of each discrepancy on predicted energy consumption, with the end goal of accuracy between predicted and actual energy consumption. In addition, an …

Wind And Thermal Effects On Ground Mounted Photovoltaic (Pv) Panels, Chowdhury Mohammad Jubayer

Electronic Thesis and Dissertation Repository

A combination of Computational Fluid Dynamics (CFD) simulations and wind tunnel experiments are carried out to investigate the effects of wind on the aerodynamic loading and heat transfer of a ground mounted stand-alone photovoltaic (PV) panel with tilt angle of 25^o in open country atmospheric boundary layer. Several azimuthal wind directions are considered: Southern 0^o, Southwest 45^o, Northwest 135^o and Northern 180^o. Three dimensional Reynolds-Averaged Navier-Stokes (RANS) approaches with an unsteady solver using Shear Stress Transport (SST) k-ω turbulence closure are employed for the CFD simulations, whereas Particle Image Velocimetry (PIV) and …

Shear Capacity Of Reinforced Concrete Beams At Elevated Temperatures, Mohamed Diab

Electronic Thesis and Dissertation Repository

Fire safety is an important design aspect that ensures structural integrity of a Reinforced Concrete (RC) building during fire events. As new codes are moving from prescriptive methods to performance-based methods, design engineers are in need of rational design tools to assess the capacity of RC elements during a fire event. Previous research work focused on the flexural and axial capacities of concrete elements exposed to fire. Research addressing the shear capacity of concrete elements exposed to fire is limited in the literature.

An analytical method to predict the shear capacity of RC beams exposed to elevated temperatures is proposed. …

Laser Assisted Friction Stir Welding: Finite Volume Method And Metaheuristic Optimization, Shivani Daftardar

LSU Master's Theses

Friction Stir Welding (FSW) is a solid state joining process that uses a non-consumable rotating welding tool to generate frictional heat at the welding location. Large forces are required to produce friction between the welding tool and the work piece which increases the wear rate of the welding tool in welding materials with high melting temperature. Several different approaches have been developed to address this problem. This thesis focuses on a new modification of friction stir welding, called Laser Assisted Friction Stir Welding, a process developed in the last decade. This process uses laser energy to preheat the work piece …

Computational Model For Heat Transfer In The Human Eye Using The Finite Element Method, Umit Cicekli

LSU Master's Theses

In this work a finite element model for the human eye presented. Thermal analysis was done in order to capture the temperature variation in the human eye. The model was created using advance finite element program ABAQUS. In the model each of the eye's component (cornea, sclera, lens, iris, aqueous and vitreous humor) has own material property. Specific boundary conditions were used for the model. The model incorporates the interaction between eyes components. The Comparisons were done with the available experimental results. The results show that there is a temperature variation in the human eye components with the increasing the …