Engineering Commons^™

Power Maximization For Pyroelectric, Piezoelectric, And Hybrid Energy Harvesting, Murtadha A. Shaheen

Theses and Dissertations

The goal of this dissertation consists of improving the efficiency of energy harvesting using pyroelectric and piezoelectric materials in a system by the proper characterization of electrical parameters, widening frequency, and coupling of both effects with the appropriate parameters.

A new simple stand-alone method of characterizing the impedance of a pyroelectric cell has been demonstrated. This method utilizes a Pyroelectric single pole low pass filter technique, PSLPF. Utilizing the properties of a PSLPF, where a known input voltage is applied and capacitance C_p and resistance R_p can be calculated at a frequency of 1 mHz to 1 Hz. …

An Experimental Investigation Of Heat Transfer For Arrays Of Impingement Jets Onto The Featured Surfaces With Cylindrical And Elliptical Raised Surfaces, Marc A. Medina

Honors Undergraduate Theses

This study focuses on multi-jet impingement for gas turbine geometries in which the objective is to understand the influence of the roughness elements on a target surface to the heat transfer. Current work has proven that implementing roughness elements for multi-jet impingement target surfaces has increased heat transfer ranging anywhere from 10-30%. This study has chosen to investigate three different roughness elements, elliptical in cross-section, to compare to smooth surface geometries for multi-jet impingement. An experimental was taken for this study to extend the current knowledge of multi-jet impingement geometries and to further understand the heat transfer performance. A temperature …

An Experimental Investigation Of The Effect Of Temperature And Space Velocity On The Performance Of A Cu-Zeolite Flow-Through Scr And A Scr Catalyst On A Dpf With And Without Pm Loading, Vaibhav Kadam

Dissertations, Master's Theses and Master's Reports

Abstract The heavy-duty diesel (HDD) engines use the diesel oxidation catalyst (DOC), catalyzed particulate filter (CPF) and urea injection based selective catalytic reduction (SCR) systems in sequential combination, to meet the US EPA 2010 PM and NOₓ emission standards. The SCR along with a NH₃ slip control catalyst (AMOX) offer NOₓ reduction >90 % with NH₃ slipHowever, there is a strong desire to further improve the NOₓ reduction performance of such systems, to meet the California Optional Low NOₓ Standard implemented since 2015. Integrating SCR functionality into a diesel particulate filter (DPF), by coating the SCR catalyst on the DPF, …

On The Aerodynamic Properties Of Slotted-Flap Flow-Control Devices For Wind Turbine Applications, Muraleekrishnan Menon Menon Muraleedharan Nair

Dissertations, Master's Theses and Master's Reports

Wind energy is growing at a fast pace and utility-scale wind turbines growing in size with increasing rotor diameters. To sustain development of up-scaled wind turbines of tomorrow there is a need for innovation in load control methodologies. This thesis research targets an assessment of the aerodynamic properties of airfoil sections specifically intended for wind turbine applications, featuring them with flow-control devices. The use of fractional chord trailing-edge flaps as slotted-flap devices on aerodynamically active parts of a turbine blade were studied. As modular devices attached externally on existing blade designs, they comfortably form a cost-effective means for active load …

Comparison Of Ignition Delays And Liquid Penetrations Of Jp-8, Synthetic Jp-8, And A Jp-8 Surrogate Under Diesel Engine Conditions, Kyle Yeakle

Dissertations, Master's Theses and Master's Reports

The U.S. Army and many NATO affiliates have adopted a ‘one fuel forward fuel policy’ (OFF). The goal of the OFF policy is reducing the logistics and cost involved with providing fuel for military vehicles. With this policy, the logical choice fuel is military grade jet petroleum, JP-8, because of the fuel constraints of turbo-jet engines. This requirement has made it necessary to run military compression ignited engines on JP-8. To reduce the Army’s reliance on petroleum based fuels an alternative fuel, synthetic JP-8, derived from coal and made in the Fischer-Tropsch production method is allowed to be blended up …

Predictive Control Of Power Grid-Connected Energy Systems Based On Energy And Exergy Metrics, Meysam Razmara

Dissertations, Master's Theses and Master's Reports

Building and transportation sectors account for 41% and 27% of total energy consumption in the US, respectively. Designing smart controllers for Heating, Ventilation and Air-Conditioning (HVAC) systems and Internal Combustion Engines (ICEs) can play a key role in reducing energy consumption. Exergy or availability is based on the First and Second Laws of Thermodynamics and is a more precise metric to evaluate energy systems including HVAC and ICE systems. This dissertation centers on development of exergy models and design of model-based controllers based on exergy and energy metrics for grid-connected energy systems including HVAC and ICEs.

In this PhD dissertation, …

Scalability Of Microscale Fractal-Like Branching Channel Networks, James R. Miller Iii

Honors College Theses

Fractal-like branching channel networks have been shown to offer the advantages of reduced pumping power and lower maximum wall temperatures when employed in the design of microscale heat sinks. Unfortunately, previous literature has been limited to microscale flow networks. In this paper, a microscale flow network will be scaled up to result in a mesoscale flow network and a macroscale flow network. In order to compare the pressure drop across the flow networks of varying scales the results will be nondimensionalized in the form of the Euler number. For a laminar inlet Reynolds number the microscale, mesoscale, and macroscale fractal-like …

Aerodynamic And Modal Analyses Of Small Scale Horizontal Axis Wind Turbine With Various Numbers Of Blade Design, Emile Maroha

Electronic Theses and Dissertations

With the global energy demand rising to unprecedented numbers, the need for alternative energy sources is ever prevalent. Wind energy is the most alternative renewable sources today due to its year-round availability and pollution-free nature. Horizontal Axis Wind Turbines (HAWT) are the most popular because of their higher efficiency. The aerodynamic characteristics and vibration of small scale HAWT with various numbers of blade design have been investigated in this numerical study in order to improve its performance. SolidWorks was used for designing CAD models, and ANSYS software was used to study the dynamic flow around the turbine as well as …

Project Oasis: Optimizing Aquaponic Systems To Improve Sustainability, Siddharth Nigam, Paige Balcom

Honors Theses and Capstones

Started in Fall 2015, Project OASIS (Optimizing Aquaponic Systems to Improve Sustainability) is an interdisciplinary capstone project with the goal of designing a sustainable and affordable small-scale aquaponic system for use in developing nations to tackle the problems of malnutrition and food insecurity. Aquaponics is a symbiotic relationship between fish and vegetables growing together in a recirculating system. The project’s goals were to minimize energy consumption and construction costs while using universally available materials. The computational fluid dynamics (CFD) software OpenFOAM was used to create transient and steady-state models of fish tanks to visualize velocity profiles, streamlines, and particle movement. …

Cogeneration System Comparison For The Akron Water Treatment Plant, Devin J. Pearcy, Madison R. Morgan

Williams Honors College, Honors Research Projects

Cogeneration is a process of electrical power generation that simultaneously harnesses the heat produced from that electrical generation and uses it to supply heat to a space. The Akron Water Plant was identified as potentially benefitting from this technology for two main reasons. First, they have a large and relatively constant electrical load. Second, they have ownership of a significant amount of natural gas wells at the site.

This report analyzes the economic feasibility of installing a cogeneration plant at the Akron Water Plant (AWP). Data was collected for the plant and its operations, including electricity bills, gas bills, plant …