Engineering Commons^™

Educational Modeling For Fault Analysis Of Power Systems With Statcom Controllers Using Simulink, Tetiana Brockhoeft

University of New Orleans Theses and Dissertations

The analysis of power systems under fault condition represents one of the most important and complex tasks in power engineering. The study and detection of these faults are necessary to ensure that the reliability and stability of the power system do not suffer a decrement as a result of a critical event such as fault. The purpose of this thesis is to develop and to present an educational tool for students to model FACTS devices using Simulink. Furthermore, the development of this thesis provides the means for students to model different types of faults. The development is based on presenting …

Power Management Strategies For Islanded Microgrids, Hisham Mahmood

Electronic Thesis and Dissertation Repository

The focus of this thesis is on developing power management strategies for islanded microgrids, at the primary and the secondary hierarchal control layers. At the Primary Control Layer, the main objective of the proposed strategies is to achieve decentralized power management of Photovoltaic (PV) and battery storage in islanded microgrids. In contrast to the common approach of controlling the PV unit as a current source, in the proposed strategies, the PV unit is controlled as a voltage source that follows a multi-segment adaptive power/frequency characteristic curve. The strategies are implemented locally at the units using multi-loop controllers without relying on …

Flatness-Based Control Methodologies To Improve Frequency Regulation In Power Systems With High Penetration Of Wind, Maryam Hassani Variani

Doctoral Dissertations

To allow for high penetration of distributed generation and alternative energy units, it is critical to minimize the complexity of generator controls and to minimize the need for close coordination across regions. We propose that existing controls be replaced by a two-tier structure of local control operating within a global context of situational awareness. Flatness as an extension of controllability for non-linear systems is a key to enabling planning and optimization at various levels of the grid in this structure. In this study, flatness-based control for: one, Automatic Generation Control (AGC) of a multi-machine system including conventional generators; and two, …

Lifetime Estimation Of Igbts In A Grid-Connected Statcom, Lakshmi Reddy Gopi Reddy

Doctoral Dissertations

Lifetime estimation of power semiconductor devices, and IGBT devices in particular, used in the power electronics integrated with power systems has gained technical importance in recent times with increased scope of distributed generation, renewable energy systems and FACTS. Since most of the common failures (wire bond and solder fatigue) are caused by thermo-mechanical stresses, the methodology of lifetime estimation starts with temperature estimation, cycle counting based on rainflow algorithm, and finally degradation calculation based on linear accumulation model.

Different number of RC cells for each packaging layer in the module for the thermal model, including the influence of encapsulant is …

High-Efficiency Three-Phase Current Source Rectifier Using Sic Devices And Delta-Type Topology, Ben Guo

Doctoral Dissertations

In this dissertation, the benefits of the three-phase current source rectifier (CSR) in high power rectifier, data center power supply and dc fast charger for electric vehicles (EV) will be evaluated, and new techniques will be proposed to increase the power efficiency of CSRs.

A new topology, referred as Delta-type Current Source Rectifier (DCSR), is proposed and implemented to reduce the conduction loss by up to 20%. By connecting the three legs in a delta type on ac input side, the dc-link current in DCSR can be shared by two legs at the same time.

To increase the switching speed …

Adaptive Control For Power System Voltage And Frequency Regulation, Yao Xu

Doctoral Dissertations

Variable and uncertain wind power output introduces new challenges to power system voltage and frequency stability. To guarantee the safe and stable operation of power systems, the control for voltage and frequency regulation is studied in this work.

Static Synchronous Compensator (STATCOM) can provide fast and efficient reactive power support to regulate system voltage. In the literature, various STATCOM control methods have been discussed, including many applications of proportional–integral (PI) controllers. However, these previous works obtain the PI gains via a trial and error approach or extensive studies with a tradeoff of performance and applicability. Hence, control parameters for the …

Frequency Monitoring Network (Fnet) Data Center Development And Data Analysis, Ye Zhang

Doctoral Dissertations

Frequency Monitoring Network (FNET) is an Internet-based, wide-area phasor measurement system that collects power system data using Frequency Disturbance Recorders (FDRs) that are installed at the distribution level. The FNET data center enables the monitoring of bulk power systems, and provides wide-area situational awareness and disturbance analysis for understanding power system disturbances and system operations. Therefore, the data center plays a very critical role in the entire FNET system framework.

In recent years, many potential challenges brought by the rapid expansion of the FNET system have underlined the importance of designing the next-generation FNET data center. More discussions about the …

An Autonomous Online I-V Tracer For Pv Monitoring Applications, Cameron William Riley

Masters Theses

With the unprecedented growth of photovoltaic technologies and their implementation in recent times, more precise methods of determining modules health, degradation, and performance are needed. Current monitoring efforts are helpful in determining these attributes but do not provide all of the information necessary to truly understand the health properties of the PV module in question. The current-voltage curve, or I-V curve, provides a level of insight into a PV module’s health unparalleled by most monitoring efforts. However, the tools which measure the I-V curve exist in an undesirable form—PV must be disconnected from its load and connected to the tool …

Modeling Sustainability In Renewable Energy Supply Chain Systems, Fei Xie

All Dissertations

This dissertation aims at modeling sustainability of renewable fuel supply chain systems against emerging challenges. In particular, the dissertation focuses on the biofuel supply chain system design, and manages to develop advanced modeling framework and corresponding solution methods in tackling challenges in sustaining biofuel supply chain systems. These challenges include: (1) to integrate 'environmental thinking' into the long-term biofuel supply chain planning; (2) to adopt multimodal transportation to mitigate seasonality in biofuel supply chain operations; (3) to provide strategies in hedging against uncertainty from conversion technology; and (4) to develop methodologies in long-term sequential planning of the biofuel supply chain …

Indirect Matrix Converter As Standard Power Electronic Interface, Andrés Escobar-Mejía

Graduate Theses and Dissertations

The increase in the penetration levels of distributed generation in the modern power grid and its importance in future energy systems have accelerated the interest of developing new power electronic interfaces for the energy conversion process. The feasibility of applying the indirect matrix converter as the standard power electronic interface for applications with power ratings from several kW to few MW is addressed in this dissertation. Special attention is given to those applications where space dominates the power electronic requirements. The main motivation for using the indirect matrix converter is that eliminates the energy storage component in the way of …

Photoelectric Characterization Of Bacteriorhodopsin Reconstituted In Lipid Bilayer Membrane, Joel Kamwa

Graduate Theses and Dissertations

The objective of this work was to conduct basic research in biologically inspired energy conversion solutions. A photosynthetic protein (Bacteriorhodopsin) was reconstituted in a bi-layer membrane. Then, when a laser beam was shined on the membrane, the photon energy was used by the protein to pump protons across the membrane. The translocation of protons across the membrane was measured as photocurrent. For this purpose, a system was built to characterize the lipid bilayer membranes and to measure the photocurrent. The lipid bilayer membrane was characterized by its capacitance and resistance. A picoampere photocurrent was observed when Bacteriorhodopsin protein was present …

Wirelessly Controlled Smart Outlet, Andrew Godsil, Ariel Dubinsky

Electrical Engineering

Popularity of home automation devices has increased greatly in recent years due to higher affordability and simplicity through smartphone and tablet connectivity. For the purpose of this experiment, we have developed the Smart Outlet: a stand-alone communication unit, used to connect home outlets to the internet. The Smart Outlet controls lighting and simple appliances throughout the home, remotely, using wireless commands from the web. A Google Calendar interface directly controls the outlets’ function by scheduling them with dedicated calendar events. The calendar’s interface can even be accessed from multiple different platforms (i.e. phones, computers, tablets) for the convenience of all …

High Voltage Pulse-Width Generator For The Algae Biofuel Project, Philip Yu, Stephen Leung

Electrical Engineering

This purpose of this project, sponsored by Boeing and advised by Dr. Arakaki and Dr. Taufik, is to build a high voltage pulse width generator that lyses algae cells to harvest the biofuel within. This project uses Emmanuel Loza's thesis on a cascaded high voltage converter with variable control to build a portable pulse width generator with independent control on the peak voltage, pulse width, and frequency. The project focuses on creating a pulse width generator capable of finding the most optimal pulsed electric field to lyse algae. The pulse width module ranges from 10V-80V peak voltage, 60Hz-100 kHz frequency, …

Numerical Simulation Of The Heat Leakage At The Gasket Region Of Domestic Refrigerators, Feng Gao

All Theses

Computational Fluid Dynamics (CFD) simulations are performed to investigate the heat loss at the gasket of a standard over/under domestic refrigerator. The study numerically simulates a unique experimental test cell with only the gasket region exposed to the ambient environment and other parts protected by insulation (see picture below). The test cell is cubic with an interior cavity having dimensions 2' x 2' x 2' within which a heating element is placed to create a specified temperature difference. A matching set of door and side panels exposes a 2' width of the gasket region to heat transfer with the surroundings. …

Energy Harvesting From Exercise Machines: Lt8705 Dc-Dc Conversion For Elliptical Trainers, Braden Burk, Raj Bhula, Nathan Mckay

Electrical Engineering

Cal Poly’s Energy Harvesting from Exercise Machines (EHFEM) program aims to power the grid using human energy harvested from exercise machines in its gym. Doing so could save the school money and increase the total supply of power available on the grid. This document belongs to one of many groups attempting to design a suitable DC-DC conversion system for an elliptical trainer using an LT8705 Four-Switch Buck-Boost converter. Past teams have built other converters and developed system compatibility characteristics such as filtering, safety, and stability for interfacing components. These teams fall into one of two departments in EHFEM: DC-DC Conversion …

Microprocessor Management Of Energy Harvesting Buck Boost Converters, Timothy O'Sullivan

Electrical Engineering

No abstract provided.

Power Chest Strap, Adrianne Thoroddsson, Dennis Lin

Electrical Engineering

The Power Chest Strap is an unobtrusive device, like a heart rate monitor, worn around the chest that harvests energy from the expansion of the chest during breathing. The chest strap stores electrical energy that can charge electronic devices such as cell phones. Since small portable devices grow in number, the power strap allows a convenient way to charge your device without having to find a wall outlet for a charger. Research on systems that scavenge energy from arm or leg movement already exist, but these systems require the ability of the user to move their arms and legs. The …

Buck Converter, Bowen Liu

Electrical Engineering

The recent sustainable energy growth triggered a huge power electronics demand, specifically related to power conversion. My senior project is a design of a buck converter which steps down the voltage from photovoltaic cells ranging from 5 to 40V to a rechargeable battery with 5V. This converter has a high enough power efficiency to effectively convert the energy harnessed from PV panels.

Design, Analysis And Implementation Of An Experimental System To Harvest Energy From Atmospheric Temperature Variations Using Ethyl Chloride Filled Bellows, Gibran Ali

All Theses

The increase in global warming and the dwindling supplies of fossil fuels have shifted the focus from traditional to alternate sources of energy. This has resulted in a concerted effort towards finding new energy sources as well as better understanding traditional renewable energy sources such as wind and solar power. In addition to the shift in focus towards alternate energy, the last two decades have offered a dramatic rise in the use of digital technologies such as wireless sensor networks that require small but isolated power supplies. Energy harvesting, a method to gather energy from ambient sources including sunlight, vibrations, …

Design Of System Level Control For A Residential Power Router, Fahad Hossain

Graduate Theses and Dissertations

This thesis presents the overall power flow and load management system for a 2 kW residential power router. The objective is to satisfy the residential load demand with cost savings by managing the energy sources including PV, battery, generator, and grid. The power flow management system algorithm is developed both for grid-connected mode and island mode. This algorithm involves the battery state of charge estimation, available PV power, load demand and electricity grid pricing. The residential load management algorithm is also developed using PV power prediction and load power prediction acquired for a day.¬ A Labview GUI is also developed …

Life Cycle Assessment Projection Of Photovoltaic Cells: A Case Study On Energy Demand Of Quantum Wire Based Photovoltaic Technology Research, Shilpi Mukherjee

Graduate Theses and Dissertations

With increasing clean-energy demand, photovoltaic (PV) technologies have gained attention as potential long-term alternative to fossil fuel energy. However, PV research and manufacture still utilize fossil fuel-powered grid electricity. With continuous enhancement of solar conversion efficiency, it is imperative to assess whether overall life cycle efficiency is also being enhanced. Many new-material PV technologies are still in their research phase, and life cycle analyses of these technologies have not yet been performed. For best results, grid dependency must be minimized for PV research, and this can be accomplished by an analytical instrument called Life Cycle Assessment (LCA).

LCA is the …

Thermal Analysis, Parasitic Extraction, And Wirebond Reliability Studies Of Power Electronic Modules, Shilpa Prabhudeva

Graduate Theses and Dissertations

This thesis research investigates thermal performance, parasitic extraction and wirebond/encapsulation reliability of power electronic modules. Thermal performance is critical to the power electronic modules. As such, thermal analysis is an important part of the power electronic module design process. Several cases are studied on generalized power modules with a full bridge layout. A database is built based on these results. The studies are performed using SolidWorks thermal simulation tool. The database involves several parameters such as power dissipation, maximum junction temperature, ambient temperature, convection coefficient required to cool the module, size of the baseplate, heat-sink size, substrate size, spacing between …

Integration Of Energy Storage Into A Future Energy System With A High Penetration Of Distributed Photovoltaic Generation, Arthur K. Barnes

Graduate Theses and Dissertations

Energy storage units (ESU) are increasingly used in electrical distribution systems because they can perform many functions compared with traditional equipment. These include peak shaving, voltage regulation, frequency regulation, provision of spinning reserve, and aiding integration of renewable generation by mitigating the effects of intermittency.

As is the case with other equipment on electric distribution systems, it is necessary to follow appropriate methodologies in order to ensure that ESU are installed in a cost-effective manner and their benefits are realized. However, the necessary methodologies for integration of ESU have not kept pace with developments in both ESU and distribution systems. …

A New Approach To Optimization Of Dynamic Reactive Power Sources Addressing Fidvr Issues, Weihong Huang

Masters Theses

Dynamic reactive power (var) sources, e.g. SVCs and STATCOMs, can effectively mitigate fault-induced delayed voltage recovery (FIDVR) issues or even voltage collapse. However, their optimal allocation in a power grid is a complicated nonlinear optimization problem since the post-fault voltage trajectories have to be solved to check constraints on voltage responses. Thus, solvers of both nonlinear optimization and power system differential and algebraic equations (DAEs) are required.

Currently, most of existing methods merely achieve dynamic optimization locally with great dependence on the initial operation point. Also, complicated algorithm and time consuming are obstacles for the practical implementation.

This thesis proposes …

Metal Assisted Nanowire Growth For Silicon Nanowire/Amorphous Silicon Composite Solar Cell, Asmaa Ali Sadoon

Graduate Theses and Dissertations

Solar cells are photovoltaic devices that convert the energy of light to electricity by the photovoltaic effect. Crystalline silicon-based solar cells are the most dominant solar cells in the market today due to the high efficiency and relatively low cost. However, the cost of such solar cell is still high due to the large amount of material that is consumed in fabricating such a device. Polycrystalline/amorphous thin films and nanomaterial technologies have emerged to reduce the high cost of c-Si based solar cells and increase the efficiency. In this research, we combined these two technologies to propose and fabricate silicon …

The Role Of Quantum Dot Size On The Performance Of Intermediate Band Solar Cells, Najla Alnami

Graduate Theses and Dissertations

The goal of this thesis is to understand possible mechanisms for the reported decrease of the open circuit voltage and solar cell efficiency in quantum dot (QD) intermediate band solar cells (IBSCs). More specifically, the effect of indium arsenide (InAs) QD height on the open circuit voltage and solar cell efficiency was studied in a systematic way. To explore this effect in QD solar cells, several solar cells (SCs) were grown with varying InAs QD heights. All experimental characteristics of the QD solar cells were compared to a reference structure without QDs. All samples were grown by Molecular Beam Epitaxy …

A Dc Distribution System For Power System Integration Of Plug-In Electric Vehicles; Modeling, Stability And Operation, Mansour Tabari

Electronic Thesis and Dissertation Repository

This thesis is mainly focused on (i) modeling of dc distribution systems for power system integration of plug-in electric vehicles (PEVs), (ii) proposing a method to enhance the stability of the dc distribution systems, and (iii) proposing an energy management strategy to control the power flow in the dc distribution system. The dc distribution system is expected to be more efficient and economical than a system of ac-dc battery chargers directly interfaced with an ac grid.

In the first part, a systematic method for developing a model for a dc distribution system, based on the configuration of the system is …

An Analysis Of Hybrid Energy System: A Case Study, Yading Yang

Morehead State Theses and Dissertations

A Thesis Presented to the Faculty of the College of Science and Technology Morehead State University in Partial Fulfillment of the Requirements for the Degree Master of Science by Yading Yang on November 24, 2014.

Effect Of Clock And Power Gating On Power Distribution Network Noise In 2d And 3d Integrated Circuits, Vinay C. Patil

Masters Theses

In this work, power supply noise contribution, at a particular node on the power grid, from clock/power gated blocks is maximized at particular time and the synthetic gating patterns of the blocks that result in the maximum noise is obtained for the interval 0 to target time. We utilize wavelet based analysis as wavelets are a natural way of characterizing the time-frequency behavior of the power grid. The gating patterns for the blocks and the maximum supply noise at the Point of Interest at the specified target time obtained via a Linear Programming (LP) formulation (clock gating) and Genetic Algorithm …

Condition Monitoring System Of Wind Turbine Generators, Khaled Bubaker Abdusamad

Electronic Theses and Dissertations

The development and implementation of the condition monitoring systems (CMS) play a significant role in overcoming the number of failures in the wind turbine generators that result from the harsh operation conditions, such as over temperature, particularly when turbines are deployed offshore. In order to increase the reliability of the wind energy industry, monitoring the operation conditions of wind generators is essential to detect the immediate faults rapidly and perform appropriate preventative maintenance. CMS helps to avoid failures, decrease the potential shutdowns while running, reduce the maintenance and operation costs and maintain wind turbines protected. The knowledge of wind turbine …