Engineering Commons^™

Rapid Development: A Content Analysis Comparison Of Literature And Purposive Sampling Of Afrl Rapid Reaction Projects, Andrew R. Smith

Theses and Dissertations

In the current environment of military operations requesting faster delivery schedules to counter insurgent tactics, the engineering team often searches for how to quickly deliver the 80% solution, typically in 6-12 months. These are labeled rapid development projects. A content analysis of best practices in commercial product development literature, where time to market is often a driving factor, was accomplished showing varying emphasis of systems engineering technical and technical management processes. Technical Planning, Stakeholders Requirements Development, and Architecture Design were identified as important processes. This analysis confirms preconceived notions of plan upfront and early by emphasizing the SE processes of …

A Method For Measuring Programmatic Dependency And Interdependency Between Dod Acquisition Programs, Matthew B. Christensen

Theses and Dissertations

There is currently no accepted method for quantitative measurement of acquisition program interdependency. While some methods exist for measuring dependency or interdependency at the component or system level, these methods do not translate well to program interdependency measurement. The objective of this thesis is to provide a model for measuring acquisition program interdependency accurately and quantitatively. The model presented in this thesis uses four Interdependency Factors to identify dependency relationships between programs. Specific Interdependency Levels are then used to measure the strengths of those dependencies. The model also accounts for measurement of dependencies upon programs that are not directly connected, …

Engineering Of A Knowledge Management System For Relational Medical Diagnosis, Maria Carolina Herrera-Hernandez

USF Tampa Graduate Theses and Dissertations

The increasingly high costs of health care in the U.S. have led the general public to search for different medical approaches. Since the 1990's, the use of Complementary and Alternative Medicine (CAM) has radically increased in the U.S. due to its approach to treat physical, mental, and emotional causes of illness. In 2009, the National Health Statistics reported the impact of CAM in the U.S. health care economy, with population expenditures of $14.8 billion out-of-pocket on natural Medicine and $12.4 billion out-of-pocket on visits to CAM providers as a complement to Western Medicine care.

CAM interconnects human functions to reach …

Reliability Analysis Of Nanocrystal Embedded High-K Nonvolatile Memories, Chia-Han Yang

Doctoral Dissertations

The evolution of the MOSFET technology has been driven by the aggressive shrinkage of the device size to improve the device performance and to increase the circuit density. Currently, many research demonstrated that the continuous polycrystalline silicon film in the floating-gate dielectric could be replaced with nanocrystal (nc) embedded high-k thin film to minimize the charge loss due to the defective thin tunnel dielectric layer.

This research deals with both the statistical aspect of reliability and electrical aspect of reliability characterization as well. In this study, the Zr-doped HfO₂ (ZrHfO) high-k MOS capacitors, which separately contain the nanocrystalline zinc …

Robust Multichannel Functional-Data-Analysis Methods For Data Recovery In Complex Systems, Jian Sun

Doctoral Dissertations

In recent years, Condition Monitoring (CM), which can be performed via several sensor channels, has been recognized as an effective paradigm for failure prevention of operational equipment or processes. However, the complexity caused by asynchronous data collection with different and/or time-varying sampling/transmission rates has long been a hindrance in the effective use of multichannel data in constructing empirical models. The problem becomes more challenging when sensor readings are incomplete. Traditional sensor data recovery techniques are often prohibited in asynchronous CM environments, not to mention sparse datasets. The proposed Functional Principal Component Analysis (FPCA) methodologies, e.g., nonparametric FPC model and semi-parametric …

City Of Industry: An Historical Precedent And Its Concrete Effects, Christina A. Hernandez

Liberal Arts and Engineering Studies

No abstract provided.

Inventory Models For Intermittent Highly Variable Demand And Policy Parameter Adjustments To Meet Desired Service Level Requirements, Yasin Unlu

Graduate Theses and Dissertations

This dissertation consists of three assays. The first assay examines the robustness of lead time demand models for the continuous review (r;Q) inventory policy. A number of classic distributions as well as distribution selection rules are examined under a wide variety of demand conditions. First, the models are compared to each other by assuming a known demand process and evaluating the errors associated with using a different model. Then, the models are examined using a large sample of simulated demand conditions. Approximation results of inventory performance measures - ready, rate excepted number of backorders and on-hand inventory levels are reported. …

Prognostics-Based Two-Operator Competition For Maintenance And Service Part Logistics, Faranak Fathi Aghdam

Masters Theses

Prognostics and timely maintenance of components are critical to the continuing operation of a system. By implementing prognostics, it is possible for the operator to maintain the system in the right place at the right time. However, the complexity in the real world makes near-zero downtime difficult to achieve partly because of a possible shortage of required service parts. This is realistic and quite important in maintenance practice. To coordinate with a prognostics-based maintenance schedule, the operator must decide when to order service parts and how to compete with other operators who also need the same parts. This research addresses …

Integrated Planning For Rural Rail Transportation, Jeffrey Cohan Gwaltney

Graduate Theses and Dissertations

Population growth in rural areas has led to new interest in rail transportation. Planning a passenger rail system involves numerous difficult decisions, most representing a trade-off between customer service and cost. In this work, we attempt to integrate many of these planning decisions. We consider strategic decisions such as station location and vehicle procurement, as well as tactical issues that include vehicle scheduling. Our integrated model exploits the linear network structure that best suits many rural American communities, including Northwest Arkansas. Due to the intractability of the integrated rail planning problem, we have developed a customized heuristic approach to solve …

Adaptive Intensity Modulated Radiation Therapy Planning Optimization With Changing Tumor Geometry And Biology Enforcing Both Cumulative And Fraction Size Dose Constraints, Behlul Saka

Graduate Theses and Dissertations

Intensity Modulated Radiation Therapy (IMRT) is a modern technique of delivering radiation treatments to cancer patients. In IMRT technology, intensities must be chosen for the many small unit grids into which the beams are divided to produce a desired distribution of dose at points throughout the body with the goal of maximizing dose delivered to the tumor while sparing healthy tissues from excessive radiation and keeping dose homogeneous across the tumor. Although IMRT plans are optimized as a single overall treatment plan, they are delivered over 30-50 treatment sessions (fractions) and both cumulative and per-fraction dose constraints apply. The extended …

Improvements On Just-About-Right (Jar) Scales As Product Optimization Tools Using Kano Modeling Concepts, Bangde Li

Graduate Theses and Dissertations

Attribute Kano characteristics are useful in product design to prioritize development efforts. However, attribute Kano characteristics have not been discussed and applied to product optimization when using Just-About-Right (JAR) scales. Product optimizations without identifying attributes Kano characteristics can be misleading. The two objectives in this research were: 1. Determine attribute Kano categories using a modified classic Kano classification methodology. 2. Propose a method to measure attribute performance and identify attribute Kano characteristics to direct product optimization. Two methodologies of attribute Kano classification were investigated. In experiment one, a modified classic Kano methodology was employed to determine attribute Kano categories through …

Optimal Charging Scheduling For Battery Electric Vehicles Under Smart Grid., Nur Dayana Abd Rahman

Electronic Theses and Dissertations

A projected high penetration of battery electric vehicles (BEV s) in the market will introduce an additional load in the electricity grid. Furthermore, uncontrolled BEV charging from residential users will exacerbate the existing peak load during evening hours. In this thesis, we propose two optimization models to alleviate the impact of extra demand from electric vehicles on the power grid. The first is a centralized charging scheduling model that coordinates the charging among BEV users under the goal of minimizing the total electricity cost for all users. The second model uses a decentralized agent-based approach to scheduling the BEV charging. …

City Of Industry: Los Efectos Concretos En El Condado De Los Angeles En La Economía, El Medio Ambiente Y La Salud Pública, Christina Andrea Hernandez

World Languages and Cultures

This project attempts to document the development of the City of Industry, located in eastern Los Angeles County, and to examine the environmental as well as socio-economic effects this industrial hub maintains on its surrounding neighborhoods. City of Industry, since its incorporation in 1957, has established an alarming precedent as a privatized city that has informed concrete changes in the local economy, the environment, and the public health of the surrounding communities that are predominantly Latina(o).

The research undertaken for this project represents an interdisciplinary intersection of a special topic in the study of Industrial Engineering: the global logistics industry, …

Modeling And Analysis Of High Energy Laser Weapon System Performance In Varying Atmospheric Conditions, Megan P. Melin

Theses and Dissertations

This thesis addresses two primary concerns relating to Directed Energy (DE) models and tests: need for more use of Design of Experiment (DOE) in structuring DE models and tests, and lack of modeling atmospheric variability in High Energy Laser (HEL) weapon system propagation models and tests. To address these concerns we use a DOE factorial design to capture main, interaction, and non-linear effects between modeled weapon design and environmental factors in a well defined simulated Air-to-Ground HEL engagement scenario. The scenario modeled considers a B1-B aircraft in the 2022 timeframe equipped with an HEL weapon, irradiating a ground target from …

Identification And Classification Of Player Types In Massive Multiplayer Online Games Using Avatar Behavior, Earl M. Bednar

Theses and Dissertations

The purpose of our research is to develop an improved methodology for classifying players (identifying deviant players such as terrorists) through multivariate analysis of data from avatar characteristics and behaviors in massive multiplayer online games (MMOGs). To build our classification models, we developed three significant enhancements to the standard Generalized Regression Neural Networks (GRNN) modeling method. The first enhancement is a feature selection technique based on GRNNs, allowing us to tailor our feature set to be best modeled by GRNNs. The second enhancement is a hybrid GRNN which allows each feature to be modeled by a GRNN tailored to its …

A Numerical Study Of Droplet Formation And Behavior Using Interface Tracking Methods, Sandeep Menon

Open Access Dissertations

An adaptive remeshing algorithm has been developed for multiphase flow simulations using the moving-mesh interface tracking (MMIT) technique. The edge-swapping algorithm uses the Delaunay criterion (in 2D) and a dynamic programming technique (in 3D) to maximize the quality of mesh primitives surrounding edges in the mesh, and performs local remeshing to minimize interpolation errors. Edge bisection and contraction operations are also performed to adjust the mesh resolution around important features like fluid-interfaces, driven by a local length scale estimation algorithm that is efficient and easily parallelized. Flow-field interpolation after reconnection is achieved using a conservative, second-order accurate remapping scheme that …

Design Of A University Research Network: Analysis, Selection, And Implementation Planning, Anna P. Hopper

Master's Theses

This report focuses on the design of a university knowledge management system (KMS), and how such a system can provide the framework for students and faculty to partake in, share, and collaborate on research activities. The collaborative environment of a university KMS, or research network, must be established in order for a university to maintain its reputation as a competitive research institution and to develop its faculty and students outside the classroom. A research network may contain a variety of features, some of which include faculty profiles, forums, communication portals, publication links, biographies, faculty keywords, interest areas and contact information. …

The Impact Of Change On System Of Systems Performance With An Application To Small And Medium Multihospital Systems, Karima Tayeb

Doctoral Dissertations

An entity that functions as a system of systems (SoS) is composed of multiple systems that individually provide various functions which collectively provide a holistic functional capability. It is complex in design and function and tends to become even more complex over time as it evolves and responds to both internal and external changes. These changes might be in the composition or in the interoperability among its system members. Since interoperability affects how well the members work as one system, managing it is critical to the performance of the SoS over its lifespan.

In support of this goal, this dissertation, …

Metaheuristics For Hub Location Models, Ornurai Sangsawang

All Dissertations

In this research, we propose metaheuristics for solving two p-hub median problems.. The first p-hub median problem, which is NP-hard, is the uncapacitated single p-hub median problem (USApHMP). In this problem, metaheuristics such as genetic algorithms, simulated annealing and tabu search, are applied in different types of representations. Caching is also
applied to speed up computational time of the algorithms. The results clearly demonstrate that tabu search with a permutation solution representation, augmented with caching is the highest performing method, both in terms of solution quality and computational time among these algorithms for the USApHMP. We also investigate the performance …

An Empirical Investigation Of Supply Chain Excellence In Healthcare, Brian Keith Smith

Graduate Theses and Dissertations

This research is motivated by opportunities to improve the cost and quality of healthcare delivery through improved supply chain processes. This research assesses the quality of the healthcare supply chain and identifies factors that are driving supply chain excellence among organizations in the healthcare industry. The first objective of this research is to assess the state of quality measurement in the healthcare supply chain. The achievement of this first objective is presented in Chapter 3 of this dissertation in the form of a manuscript accepted for publication in The Quality Management Journal. The second research objective is to develop …

Evaluating The Capacity Of A Proton Therapy Facility, Ridvan Gedik

Graduate Theses and Dissertations

A relatively new consideration in proton therapy planning is the requirement that the mix of patients treated satisfy desired percentages. Since it is very dicult to satisfy an integer number of patients in light of these requirements, deviations from patient mix preferences and their impacts on operational capabilities are of particular interest to healthcare planners. Therefore, we propose a bicriteria mathematical programming model that determines an outpatient schedule maximizing the number of fractions and minimizing the deviations from the patient mix ratios over the planning horizon. The tradeos between the two objectives are identied through analysis of ecient frontiers. Our …

Dynamic Human Resource Predictive Model For Complex Organizations, Tachapon Saengsureepornchai

Masters Theses

Every organization has to deal with planning of the appropriate level of human resources over time. The workforce is not always aligned with the requirements of the organization and it increases an organization’s budget. A literature review reveals that there is no model that can systematically predict accurate human resource required within a complex organization. To address this gap, a human resource predictive model was developed based on material requirements planning (MRP). This approach accounts for complexity in workforce planning and generalized it with a logistic regression model. The model estimates the employee turnover number and forecasts the expected remaining …

The Effects Of Weather Recognition Training On General Aviation Pilot Situation Assessment And Tactical Decision Making When Confronted With Adverse Weather Conditions, Chansik Kim

All Dissertations

Previous general aviation (GA) accident studies showed that decision errors were more associated with fatal GA accidents than other kinds of human errors, and weather related accidents, especially continued visual flight rules (VFR) flight into instrument meteorological conditions (IMC), remained the major cause of fatal GA accidents. Thus, finding the underlying causes of GA pilots' decision errors and continued VFR flight into adverse weather conditions are needed to reduce weather related GA accidents as well as fatal GA accidents.
Causal factors and hypotheses of weather related GA accidents show that knowledge, experience, motivation, and weather information frequently have been referred …

Improving Quality Of Service In Ems Systems By Reducing Disparities Between Service Zones, Sunarin Chanta

All Dissertations

Emergency medical service (EMS) systems respond to emergency or urgent calls so as to provide immediate care, such as pre-hospital care and/or transportation, to hospitals. Care must be provided in a timely manner; in fact quality of service is usually directly associated with response time. To reduce the response time, the number and location of vehicles within the service area are important variables. However with limited capacity, increasing the number of vehicles is often an infeasible alternative. Therefore, a critical design goal is to decide at which facilities stations should be located in order to serve as much demand as …

Applying Inventory Control Practices Within The Sisters Of Mercy Health Care Supply Chain, Server Apras

Graduate Theses and Dissertations

This research lays a foundation for the better understanding of the application and acceptance of more advanced inventory control practices within the health care supply chain. The demand characteristics and optimal control policies for pharmaceutical items within a multi-echelon provider network are examined within the framework of a case study. Demand forecasting algorithms were applied to forecast demand for inventory control procedures. A spreadsheet-based inventory planning tool was used to minimize the inventory holding and ordering costs subject to fill rate constraints. The costs of inventory control models are compared to the current ordering and inventory control strategies to document …

An Experimental Approach For Developing Rfid Ready Receiving And Shipping, Amoldeep Singh Jaggi

Masters Theses

Abstract:

Radio Frequency Identification (RFID) and related technologies have been touted to allow exponential improvements in supply chain logistics and management. However, many industrial users have indicated that these technologies have not provided the anticipated benefits. The two complimentary strategies required to address the RFID reliability are: to improve the reliability of RFID technology and to design the supply chain infrastructure that enables RFID. The focus of this paper is on designing the supply chain infrastructure to enable RFID by developing guidelines for “RFID Ready Facilities”. These guidelines were developed based on a set of experiments conducted in the RFID …

Anticipating U.S. Population-Level Health And Economic Impacts Using Discrete-Event Simulation To Guide Health Policy Decisions, Odette Reifsnider

All Dissertations

This dissertation presents two applications of discrete-event simulation (DES) to represent clinical processes: (1) a model to quantify the risk of the maternal obese and diabetic intrauterine environment influence on progression to adult obesity and diabetes, and (2) a model to evaluate health and economic outcomes of different smoking cessation strategies. The first application considers the public health impact of the diabetic and obese intrauterine environment's effect on the prevalence of diabetes and obesity across subsequent generations. We first develop a preliminary DES model to investigate and characterize the epidemiology of diabetes during pregnancy and birth outcomes related to maternal …

Cyber Physical Complex Networks, Modeling, Analysis, And Control, Neveen Shlayan

UNLV Theses, Dissertations, Professional Papers, and Capstones

This research scrutinize various attributes of complex networks; mainly, modeling, sensing, estimation, safety analysis, and control. In this study, formal languages and finite automata are used for modeling incident management processes. Safety properties are checked in order to verify the system. This method introduces a systematic approach to incident management protocols that are governed by mostly unsystematic algorithms. A portion of the used data in this study is collected by means of radar and loop detectors. A weighted t-statistics methodology is developed in order to validate these detectors. The detector data is then used to extract travel time information where …

Using Discrete Event Computer Simulation To Analyze The Effects Of Proposed Changes To Personnel In A Hospital Medical Laboratory, Gerardo Morales

Theses and Dissertations - UTB/UTPA

A discrete event computer simulation is used to model a portion of the medical laboratory at Doctors Hospital at Renaissance in order to assess the current situation as well as to review the planed personnel changes. The area under observation is the section in which the processor(s) receive, label and distribute the patient samples. There are four cases modeled in the simulation: The main focus is to determine if one or two processors are needed per shift and if the high level of phone calls poses a significant delay to the processors’ workflow. The simulation results indicate that having two …

A Systemic Approach To Next Generation Infrastructure Data Elicitation And Planning Using Serious Gaming Methods, Ersin Ancel

Engineering Management & Systems Engineering Theses & Dissertations

Infrastructure systems are vital to the functioning of our society and economy. However, these systems are increasingly complex and are more interdependent than ever, making them difficult to manage. In order to respond to increasing demand, environmental concerns, and natural and man-made threats, infrastructure systems have to adapt and transform. Traditional engineering design approaches and planning tools have proven to be inadequate when planning and managing these complex socio-technical system transitions. The design and implementation of next generation infrastructure systems require holistic methodologies, encompassing organizational and societal aspects in addition to technical factors. In order to do so, a serious …