Engineering Commons^™

Assessing Adoption Barriers Of Sustainable Packaging In Egypt, Carol Ramses Morgan

Theses and Dissertations

Sustainable packaging has become an essential part of business decisions and corporate directions. With the rise of environmental damages due to improper waste management and unsustainable practices, businesses have a major responsibility to analyze their products’ life cycles and redesign them with sustainability in mind. Applying sustainable packaging could save companies large amounts of resources, therefore cutting costs, while also achieving the legal and social duty as a corporation towards society and the environment. Many developing countries, with specific focus on Egypt, have recently focused on legislative and corporate decisions in order to encourage more sustainable practices. Egypt’s new Waste …

Integrated Computer-Aided Design, Experimentation, And Optimization Approach For Perovskites And Petroleum Packaging Processes, Swapana Subbarao Jerpoth

Theses and Dissertations

According to the World Economic Forum report, the U.S. currently has an energy efficiency of just 30%, thus illustrating the potential scope and need for efficiency enhancement and waste minimization. In the U.S. energy sector, petroleum and solar energy are the two key pillars that have the potential to create research opportunities for transition to a cleaner, greener, and sustainable future. In this research endeavor, the focus is on two pivotal areas: (i) Computer-aided perovskite solar cell synthesis; and (ii) Optimization of flow processes through multiproduct petroleum pipelines. In the area of perovskite synthesis, the emphasis is on the enhancement …

A Systems Approach To Process Design And Sustainability - Synergy Via Pollution Prevention, Control, And Source Reduction, Emmanuel Apau Aboagye

Theses and Dissertations

Historically, process design prioritized efficiency and profitability, often overlooking environmental and societal implications. However, given the global challenges like climate change and resource scarcity, there is a growing emphasis on embedding sustainability into process design. Adopting a systems-oriented approach provides a comprehensive view, spanning from raw material acquisition to end-of-life product management. Such an approach not only identifies potential sustainability challenges but ensures that solutions foster both environmental responsibility and economic viability. In this study, a comprehensive framework for designing industrial systems is introduced, aiming to encompass the entire lifecycle impacts of chemical processes. The research initially delves into two …

An Investigation Into Applications Of Canonical Polyadic Decomposition & Ensemble Learning In Forecasting Thermal Data Streams In Direct Laser Deposition Processes, Jonathan Storey

Theses and Dissertations

Additive manufacturing (AM) is a process of creating objects from 3D model data by adding layers of material. AM technologies present several advantages compared to traditional manufacturing technologies, such as producing less material waste and being capable of producing parts with greater geometric complexity. However, deficiencies in the printing process due to high process uncertainty can affect the microstructural properties of a fabricated part leading to defects. In metal AM, previous studies have linked defects in parts with melt pool temperature fluctuations, with the size of the melt pool and the scan pattern being key factors associated with part defects. …

Gaze Tracking Embedded Collaborative Robots For Automated Metrology And Reverse Engineering, Sachithra H. Karunathilake

Theses and Dissertations

Conventional geometric metrology, or three-dimensional (3D) scanning, and reverse engineering heavily rely on the experience of the operators. With an increasing need for automation, robot arms have been adopted for this task. However, due to the large variety of parts and designs, automated path planning could provide a scanning solution that may overlook the critical area, which could potentially deteriorate the scan results. This study explores the integration of collaborative robotics (cobots) with eye tracking technology to improve the autonomous 3D scanning process. The primary objective of this study is to enhance the accuracy and efficiency of cobots in …

Task Optimization Utilizing Digital Transformation Concepts - Automation Project Execution Via Agile Methodology, Anthony Steven Maiello

Theses and Dissertations

Task Optimization via the use of automated process improvements is becoming more widespread as more industries lean into the concepts surrounding digital transformation. This shift also necessitates a complementary adaptation in project management methodologies to support the rapid and ever-changing environment, requirements, and innovations. This thesis examines the effectiveness of Agile methodology in managing digital automation projects, with a specific focus placed on process improvements with systems engineering. It accomplished this by contrasting the original model, designed and derived utilizing traditional project management techniques, with the proposed model which is a direct result of the application of Agile project practices. …

Simulation Analysis Of The Distrix Protocol For Political Redistricting, Cui Fu

Theses and Dissertations

This thesis explores the process of political redistricting, a crucial component of ensuring fair representation in legislative bodies. The study first outlines the background and criteria of redistricting in the United States, emphasizing important criteria such as equal population, racial fairness, contiguity, and political fairness. It then focuses on the Distrix protocol for political redistricting in which two or more players (i.e., political parties) take turns assigning small pieces of territory to districts until no more unassigned territory remains. The Distrix protocol was recently introduced in a board game of the same name. After describing the Distrix protocol, we present …

Design Space Visualization And Exploration For Many Goal Problems Under Uncertainity, Niharika Balaji

Theses and Dissertations

ABSTRACT

Designing a complex engineered system is challenging due to many conflicting goals, uncertainties, and multiple interactions. Traditional optimization approaches often yield single-point solutions, which may not be suitable for early design stages due to their susceptibility to changes in conditions and uncertainties. To address this challenge, a satisficing approach is employed. This approach enables designers to effectively navigate the design space and identify satisficing solutions that balance conflicting goals in the face of uncertainties and changes in conditions. From a systems design perspective, we view design as an iterative process that involves making informed decisions based on available information …

Assessing And Predicting The Students’ Systems Thinking Preference: Multi-Criteria Decision Making And Machine Learning, Siham Tazzit

Theses and Dissertations

The 21st century is marked by a technological revolution that features digital implementation and high interconnectivity between systems across different domains, such as transportation, agriculture, education, and health. Although these technological changes resulted in modern systems capable of easing individuals’ lives, these systems are increasingly complex, and that increased complexity is only expected to continue. The increased system complexity is due to the rapid exchange of information between subsystems, which creates high interconnectivity and interdependence between the subsystems and their elements. Workforce skill sets, as a result, must be modified appropriately to ensure the systems’ success. Systems Thinking is an …

Ai-Enabled Modeling And Monitoring Of Data-Rich Advanced Manufacturing Systems, Abdullah Al Mamun

Theses and Dissertations

The infrastructure of cyber-physical systems (CPS) is based on a meta-concept of cybermanufacturing systems (CMS) that synchronizes the Industrial Internet of Things (IIoTs), Cloud Computing, Industrial Control Systems (ICSs), and Big Data analytics in manufacturing operations. Artificial Intelligence (AI) can be incorporated to make intelligent decisions in the day-to-day operations of CMS. Cyberattack spaces in AI-based cybermanufacturing operations pose significant challenges, including unauthorized modification of systems, loss of historical data, destructive malware, software malfunctioning, etc. However, a cybersecurity framework can be implemented to prevent unauthorized access, theft, damage, or other harmful attacks on electronic equipment, networks, and sensitive data. The …

Distributionally Robust Unsupervised Domain Adaptation And Its Applications In 2d And 3d Image Analysis, Yibin Wang

Theses and Dissertations

Obtaining ground-truth label information from real-world data along with uncertainty quantification can be challenging or even infeasible. In the absence of labeled data for a certain task, unsupervised domain adaptation (UDA) techniques have shown great accomplishment by learning transferable knowledge from labeled source domain data and adapting it to unlabeled target domain data, yet uncertainties are still a big concern under domain shifts. Distributionally robust learning (DRL) is emerging as a high-potential technique for building reliable learning systems that are robust to distribution shifts. In this research, a distributionally robust unsupervised domain adaptation (DRUDA) method is proposed to enhance the …

Resources Based Planning Framework For Infrastructure Maintenance And Rehabilitation Projects, Heba Gad

Theses and Dissertations

Infrastructure maintenance and rehabilitation projects involve activities scattered over a large geographical area (e.g., scattered road segments maintenance, telecom towers maintenance program, etc.). Planning such projects require a resource-based approach that accounts for the implications of resource mobility between activities’ locations in terms of time & cost. Existing scheduling techniques fall short of addressing the unique challenges of the scattered nature of these projects in combination with organization's limited resources availability. To address this need, this research presents a resources-based planning framework for infrastructure maintenance and rehabilitation scattered projects with the objective of enhancing resources utilization achieving time and cost …

Passive Vs. Active Wearable Technology Monitoring Trunk Flexion In Elementary Teachers, Bailey Jose

Theses and Dissertations

The objective of this study was to assess the biomechanical and subjective measures of elementary school teachers while wearing active and/or passive wearable devices during the average workday. Five elementary school teachers wore a harness that held an Upright GO 2 posture tracking device and a Vicon Blue Trident sensor on the participant's upper back for two school days. Haptic feedback was on for one day and off for the other. Data from the Vicon wearable was analyzed to determine participants’ trunk flexion severity, frequency, and duration. Surveys were used to determine perceived exertion and perception of wearable technology. This …

A Generalizable Method And Case Application For Development And Use Of The Aviation Systems – Trust Survey (As-Ts)., Jamison Hicks

Theses and Dissertations

Automated systems are integral in the development of modern aircraft, especially for complex military aircraft. Pilot Trust in Automation (TIA) in these systems is vital for optimizing the pilot-vehicle interface and ensuring pilots use the systems appropriately to complete required tasks.

The objective of this research was to develop and validate a TIA scale and survey methodology to identify and mitigate trust deficiencies with automated systems for use in Army Aviation testing. There is currently no standard TIA assessment methodology for U.S. Army aviation pilots that identifies trust deficiencies and potential mitigations.

A comprehensive literature review was conducted to identify …

Adaptive Large Neighborhood Search Algorithm – Performance Evaluation Under Parallel Schemes & Applications, Sandip Kumar

Theses and Dissertations

Adaptive Large Neighborhood Search (ALNS) is a fairly recent yet popular single-solution heuristic for solving discrete optimization problems. Even though the heuristic has been a popular choice for researchers in recent times, the parallelization of this algorithm is not widely studied in the literature compared to the other classical metaheuristics. To extend the existing literature, this study proposes several different parallel schemes to parallelize the basic/sequential ALNS algorithm. More specifically, seven different parallel schemes are employed to target different characteristics of the ALNS algorithm and the capability of the local computers. The schemes of this study are implemented in a …

High-Level Requirements For Conceptual Design Of Bridge Deflection Measurement System Using Model-Based Systems Engineering, Mariana Villalabeitia Arenas

Theses and Dissertations

Bridges are essential in the infrastructure transportation system. Repairs and maintenance are the key activities to keep them safe for use. Over the years, the evolution of technology has been applied to improve the way bridges are designed, built, monitored, inspected, and repaired. Nevertheless, there is still a gap between the research efforts and the application of this knowledge in the practical field of bridge inspections. Model-based Systems Engineering is a formalized methodology in the system design that is centered around the model throughout all the life cycle stages of a system, supporting the requirements, design, analysis, verification, and validation …

Modeling The Impact Of Scheduling Risks On Multi-Team Agile Projects, Bria Marie Booth

Theses and Dissertations

Agile project management allows for a quick response to a changing project environment. This opens possible avenues for new opportunities, but also may expose ongoing projects to previously unknown or unexpected threats. Risks must be continuously monitored as a product is worked on to avoid lost potential. This paper will propose a discrete event simulation model that multi-team projects may use to predict the impact to the project’s schedule. Using discrete event simulation early in the project’s planning cycle offers a greater understanding of the possible or probable impact of risks on the schedule. This would help to prepare project …

Geometric Inference In Machine Learning: Applications Of Fisher Information For Model Selection And Other Statistical Applications, Trevor Herntier

Theses and Dissertations

We consider the problem of model selection using the Minimum Description Length (MDL) criterion for distributions with parameters on the hypersphere. Model selection algorithms aim to find a compromise between goodness of fit and model complexity. Variables often considered for complexity penalties involve number of parameters, sample size and shape of the parameter space, with the penalty term often referred to as stochastic complexity. Because Laplace approximation techniques yield inaccurate results for curved spaces, existing criteria incorrectly penalize complexity. We demonstrate how the use of a constrained Laplace approximation on the hypersphere yields a novel complexity measure that more accurately …

Causal Modeling Framework For Nuclear Power Plant Licensing Process, Lauren Kimberly Kiser

Theses and Dissertations

Interests in clean energy revived the nuclear power industry. For the first time in decades, innovative technologies and plant designs are being considered by regulatory agencies. This dissertation explores a Bayesian Network and AHP approach to causal modeling of the Combined License review process for new nuclear power plants (NPP). Historically lengthy and expensive, NPP licensing is critical to ensuring safe operation of the plants. With this comes a high standard for applicants to reach that can result in multiple revision cycles and long review times. New plant designs and fluctuating public support lead to a complex and dynamic series …

Model Based Systems Engineering Approaches To Chemicals And Materials Manufacturing, Quang Le

Theses and Dissertations

Model-based systems engineering (MBSE) is part of a long-term trend toward model-centric approaches adopted by many engineering disciplines. This work establishes the need for an MBSE approach by reviewing the importance, complexity, and vulnerability of the U.S. chemical supply chains. The origins, work processes, modeling approaches, and supporting tools of the systems engineering discipline (SE) are discussed, along with the limitations of the current Process Systems Engineering (PSE) framework. The case is made for MBSE as a more generalizable and robust approach. Systems modeling strategies for MBSE are introduced, as well as a novel MBSE method that supports the automation …

Practical Requirements Elicitation In Modern Product Development: A Multi-Case Study In Discontinuous Innovation, Michael King

Theses and Dissertations

Practical modern product development, specifically rapid, lean efforts to create new disrupting or specialized products, face constraints that require modified requirements elicitation (RE) techniques. Requirements elicitation conventions have not been updated to address the challenges of these approaches, and industry practitioners lack the tools to select the most efficient techniques. This study examines the RE approaches performed by three resource-limited teams conducting discontinuous new product development through a multi-case study to identify gaps between the literature and practice, with suggestions to fill them. Our findings suggest modern RE practices and challenges closely reflect those found by studies on RE in …

Towards Structured Planning And Learning At The State Fisheries Agency Scale, Caleb A. Aldridge

Theses and Dissertations

Inland recreational fisheries has grown philosophically and scientifically to consider economic and sociopolitical aspects (non-biological) in addition to the biological. However, integrating biological and non-biological aspects of inland fisheries has been challenging. Thus, an opportunity exists to develop approaches and tools which operationalize planning and decision-making processes which include biological and non-biological aspects of a fishery. This dissertation expands the idea that a core set of goals and objectives is shared among and within inland fisheries agencies; that many routine operations of inland fisheries managers can be regimented or standardized; and the novel concept that current information and operations can …

Developing An Early Life Cycle Manufacturability Assessment For Conceptual Designs, Tonya Gamblin Mccall

Theses and Dissertations

Studies have shown that 70 – 80% of a product's life cycle costs are committed by the end of the product design phase (Anderson, 2014; National Research Council, 1991; Swift, 1987). This supports the general claim that decision making in the conceptual stage drives the cost throughout the life cycle. The use of concurrent engineering has been viewed as the answer to this problem, offering the Design for Excellence (DFX) as one approach for evaluating product designs across specific disciplines. This research focuses on a subset of DFX referred to as Design for Manufacturability to develop a means to assess …

Integrating Model-Based Systems Engineering Industry Transformations For Workforce Development, Wilma Analisa Ankobiah

Theses and Dissertations

This study explores whether MBSE industry workforce requirements are being satisfied by the academic curricula of US institutions. Using an industry survey, which is highlighted in Chapter 3, identifies the existing perception of MBSE from various industries and explores the MBSE needs of professionals, such as tools concepts and languages. It examines how industry professionals perceive MBSE, the advantages and challenges of MBSE use and the preferred MBSE tools, languages and knowledge of concepts deemed necessary to ensure project success in the respective industry sectors. Results of phase 1 industry survey will summarize the current MBSE concepts, tools and languages …

Cooperative Wide Area Search Algorithm Analysis Using Sub-Region Techniques, Shawn Whitney

Theses and Dissertations

Recent advances in small Unmmaned Aerial Vehicle (UAV) technology reinvigorates the need for additional research into Wide Area Search (WAS) algorithms for civilian and military applications. But due to the extremely large variability in UAV environments and design, Digital Engineering (DE) is utilized to reduce the time, cost, and energy required to advance this technology. DE also allows rapid design and evaluation of autonomous systems which utilize and support WAS algorithms. Modern WAS algorithms can be broadly classified into decision-based algorithms, statistical algorithms, and Artificial Intelligence (AI)/Machine Learning (ML) algorithms. This research continues on the work by Hatzinger and Gertsman …

Optimal Scheduling Of Aircraft Test And Evaluation Fleets To Balance Availability For Testing And Training, Sarah E. Hoops

Theses and Dissertations

The 96th Test Wing at Eglin Air Force Base manually schedules a fleet of approximately 26 aircraft to conduct a range of missions over a one-to-two year planning period. This study automates the scheduling process, does so in a manner that optimizes multiple planning goals related to aircraft availability for training, and provides the 96th Test Wing with a software tool for the implementation that can be used by operational analysts within the command. We formulate the scheduling problem as a multiobjective, nonlinear, binary integer math program that seeks to maximize both the lowest percent of time any aircraft is …

Project Selection In Facility And Infrastructure Maintenance Organizations, Bayram M. Kurbanov

Theses and Dissertations

The current Air Force Civil Engineer Center (AFCEC) built infrastructure Facility Sustainment Restoration and Modernization (FSRM) portfolio management methodology results in an unbalanced project portfolio. The consequence of this unbalance is that majority of the funding goes towards buildings on the flightline and Facility Support Services activities do not get adequate funding which leads to further deterioration of those facilities. This research investigates whether decision support framework based on Value-Focused Thinking (VFT) process yields better project selection outcomes for facility and infrastructure maintenance organizations. To accomplish that, the investigation focuses on understanding current AFCEC decision support methodology, building an alternative …

Evaluating Performance Competencies In The Royal Saudi Air Force Engineering Directorate And Squadrons, Faisal A. Al Dawood

Theses and Dissertations

The effectiveness of tasks performed by the directorate of aeronautical engineering and squadrons in RSAF directly impacts flight safety, which in turn influences the organization either positively or negatively. Therefore, improving engineers' competencies will improve the overall performance of the organization. The study refined and reconstructed a model, namely a T-shape competency model, to assess the engineers' competencies which revealed some management and competency-related deficiencies and concluded with managerial recommendations.

A Methodological Framework For Parametric Combat Analysis, Dustin L. Hayhurst Sr.

Theses and Dissertations

This work presents a taxonomic structure for understanding the tension between certain factors of stability for game-theoretic outcomes such as Nash optimality, Pareto optimality, and balance optimality and then applies such game-theoretic concepts to the advancement of strategic thought on spacepower. This work successfully adapts and applies combat modeling theory to the evaluation of cislunar space conflict. This work provides evidence that the reliability characteristics of small spacecraft share similarities to the reliability characteristics of large spacecraft. Using these novel foundational concepts, this dissertation develops and presents a parametric methodological framework capable of analyzing the efficacy of heterogeneous force compositions …

Value Focused Thinking Analysis Of C-Band Australia Radar Operations, Samuel Ray Grothman

Theses and Dissertations

The radars used for Space Domain Awareness (SDA) are inherently all-weather, day/night sensors capable of around the clock operations. Despite this fact, some radars are operated for fewer than their maximum operating capabilities. The decision-making process for selecting the operating hours of a sensor has historically been based on only a few factors or just one. This research uses the techniques in Value Focused Thinking to develop an evaluation process to score possible alternatives and find the alternative with the most value for the decision maker. By investigating the value that is added by operating an SDA radar, it is …