Engineering Commons^™

An Evaluation Of The Deployment Of A Distributed Strain And Temperature (Dst) Fiber Optic Sensing System In An Underground Facility, Calvin Kammerer

Graduate Theses & Non-Theses

In an effort to further mine safety and utilize the recent advances in fiber optic sensors’ distributed sensing capabilities, a research project at Montana Tech has deployed fiber optic sensors in an underground environment. The method of Brillouin scattering that has documented success in a mining environment will be used because it shows the greatest potential for detecting both temperature and strain in the deployed environment, as well as the ability to differentiate between the two. The primary objective of the Montana Tech research is to create a scenario where the distributed sensing technology can be evaluated for its sensing …

Entity Summarization Of Reviews And Micro-Reviews, Thanh Son Nguyen

Dissertations and Theses Collection (Open Access)

Along with the regular review content, there is a new type of user-generated content arising from the prevalence of mobile devices and social media, that is micro-review. Micro-reviews are bite-size reviews (usually under 200 char- acters), commonly posted on social media or check-in services, using a mobile device. They capture the immediate reaction of users, and they are rich in information, concise, and to the point. Both reviews and micro-reviews are useful for users to get to know the entity of interest, thus facilitating users in making their decision of purchasing or dining. However, the abundant number of both reviews …

Evaluating Open Pit Highwall Dig Compliance, Judith Buaba

Graduate Theses & Non-Theses

The mine planning process comprises three major stages: collection of relevant data, application of design methods and measurement of performance. Relevant information about the geology, structure, rock mass and hydrogeology are collected to create a geotechnical model. This information, collected by the geotechnical engineer, is used to design the pit slopes which are incorporated into the pit design by the mine planner based on mining regulations, safety and economics. Drilling, blasting, excavation and dewatering activities mainly constitute the implementation stage of the mine design. Mining to achieve design has proven to be difficult practically. Factors such as geology, blasting and …

Implementing An Ore Reconciliation System Supported By Statistical Process Control, Bryan Nielson

Graduate Theses & Non-Theses

There are several stages within mine planning that utilize different block models to help predict future values. Ore reconciliation manages the variance observed between the forecasted values from these block models and actual production data. This paper primarily focuses on an ore reconciliation system that was developed for an open pit copper operation located in the Western United States. A monthly reconciliation approach has been setup in a stepwise format along the mine value chain. Mine call factors are calculated each month for each step within the operation’s mining process to measure the variance between predicted values and production data. …

The Effects Of Underground Blasting On Nearby Pre-Existing Structures, Logan Connolly

Graduate Theses & Non-Theses

Butte, Montana holds a prestigious place in the history of mining, deemed “The Richest Hill on Earth,” containing a plethora of underground mines. The Orphan Boy/Orphan Girl underground mines, on the western side of Butte, operated from 1895-1956 producing zinc, lead, silver, and manganese. Today, the Orphan Boy mine is part of Montana Tech’s Underground Mine Education Center (UMEC) and the Orphan Girl mine houses the World Museum of Mining. Underground development in the Orphan Boy mine continues to progress as students from Montana Tech receive hands-on underground training; in addition, the UMEC is a multi-disciplinary research facility. Repeated underground …

Developing Trees Tolerant To Degraded Mine Soils In An Underground Greenhouse, Cosmas Opoku-Ware

Graduate Theses & Non-Theses

This project explored the potential for developing trees tolerable to degraded un-reclaimed mine site soils and tailings as a solution to re-establishing long-term tree growth on those sites. The project incorporates growing tree seedlings in an underground greenhouse grown from seeds planted in the degraded mine soils in which they will eventually be planted. The outcome of the project is expected to lead to a successful solution for re-establishing tree growth in soils and tailings containing high metal concentrations with minimal post-planting human intervention at a relatively low cost.

The research is being conducted in an underground greenhouse located 100 …

Optimization Of Drilling And Blasting Practices At A Western Us Open Pit Copper Mine, Joel Gadikor

Graduate Theses & Non-Theses

The mining process begins with drilling and blasting activities. The efficiency of blasting affects all downstream operations such as loading, hauling, crushing and milling. Therefore drilling and blasting activities should be designed to ensure that designed parameters produce the desired fragmentation. The Kuz-Ram model is a fragmentation prediction model and is widely used for predicting the fragmentation distribution from blasting in the mining industry. This research evaluates the performance of the Kuz-Ram and Modified Kuz-Ram models to determine the most accurate models applicable to a Western US open pit copper mine’s fragmentation data. The performance assessment was done using the …

Study On The Surface Features Of Preg-Robbing Carbonaceous Matter During Oxidation Treatment, Mana Pourdasht

Electronic Thesis and Dissertation Repository

Carbonaceous gold ores have the ability to adsorb gold (I) cyanide from leach solutions during processing. This phenomenon, known as preg-robbing, is responsible for poor recoveries as the carbonaceous materials of the ore compete with activated carbon used during the leaching and adsorption phase of processing. Chemical oxidation of carbonaceous materials by different reagents has been utilized to investigate and compare the mechanism of Au (CN)₂ adsorption onto carbonaceous materials prior to and following the treatment.

The procedure for characterization of the carbonaceous materials (plain and modified) in the sample combines the use of several analytical techniques and test …

Investigation Of The Effectiveness Of An Integrated Flooded-Bed Dust Scrubber On A Longwall Shearer Through Laboratory Testing And Cfd Simulation, Sampurna N. Arya

Theses and Dissertations--Mining Engineering

Dust generation at an underground coal mine working face continues to be a health and safety issue. Prolonged exposure to high concentrations of airborne respirable dust can cause a debilitating and often fatal respiratory disease called Black Lung. In addition, the deposition of float dust in mine return airways poses a serious safety hazard if not sufficiently diluted with inert rock dust. A localized methane explosion can transition into a self-propagating dust explosion. Since dust is a byproduct of various mining activities, such as cutting and loading, crushing, and transportation, the dust-related issues cannot be totally eliminated. However, the adverse …

Evaluation And Prevention Of Spontaneous Combustion During Handling And Storage Of Coal, Amir E. Najarzadeh

Theses and Dissertations--Mining Engineering

Spontaneous combustion of coal has historically been a major problem for the coal industry, predominantly during storage and transportation. Various methods have been used in the laboratory for evaluating the propensity of different coal sources to self-heat. However, the heterogeneity of coal and the complexity of the system has resulted in inconsistencies and sometimes conflicting results as indicated by the findings reported in several publications.

The primary objective of the current study was to build a laboratory scale apparatus that simulates the condition of a coal stockpile to evaluate the events leading to spontaneous combustion and develop potential remedies. As …

Synthesis Of Single-Hole Vibration Waveforms From A Mining Blast, Lifeng Li

Theses and Dissertations--Mining Engineering

In mining engineering, blast-induced ground vibration has become one of the major concerns when production blasts are conducted, especially when the mining areas and the blast sites are near inhabited areas or infrastructure of interest. To comply with regulations, a vibration monitoring program should be developed for each mining operation. The vibration level, which is usually indicated by the peak particle velocity (PPV) of the vibration waveform, should fall below the maximum allowable values. Ideally, when blasting is near structures of interest (power towers, dams, houses, etc.), the vibration level (PPV) should be predicted prior to the actual production blasts. …

Numerical Analysis Of Stress Distributions For Multiple Backfilled Stopes, Christopher Richard Newman

Theses and Dissertations--Mining Engineering

Over the past three decades, technological innovations with respect to cemented paste backfill (CPB) as a means of ground support has allowed for increased production within the mining industry, management mine waste costs, as well as the improvement of the overall health and safety of underground mining operations. Despite the extensive use of this relatively new ground support material, many fundamental factors affecting the design of safe and economical CPB structures are still not well understood.Recently, a significant amount of academic and industry research has been conducted to better understanding the distribution of stress with respect to primary-secondary extraction sequencing …

Analysis Of Underground Coal Mine Structures Subjected To Dynamic Events, Brooklynn Yonts

Theses and Dissertations--Mining Engineering

Underground coal mine explosions pose a significant threat to infrastructure such as mine seals and refuge alternative chambers. After a mine seal failed in the Sago mine disaster, which took the life of 12 miners, design requirements were reexamined and improved. However, most research being completed on the analysis of mine structures during an explosive event focuses solely on peak pressure values, while ignoring the impact of pressure duration. This study investigates the impact pressure duration, waveform shape, and impulse have on structural displacement, while also exploring what pressures and duration can be expected during a mine explosion. Additionally, the …

Hydrogeology And Water Management In The Arkwright Underground Coal Mine, Pittsburgh Seam, Northern West Virginia, Bryant D. Mountjoy

Graduate Theses, Dissertations, and Problem Reports

Arkwright #1 is a closed underground mine in the Pittsburgh coal seam near Morgantown, West Virginia USA. Arkwright shares perimeter boundaries/barriers with three other closed Pittsburgh seam mines (Osage #3, Jordan #93, Federal #1) and is partially overlain by flooded Sewickley seam mines, 25 m above it. This mine is significant primarily because it manages and treats water diverted from nearly 20 other closed mines over a 600 square kilometer area. This study examines water levels, pump records, and mine maps to describe the hydrogeology of Arkwright Mine. After closure in 1995, Arkwright and the adjacent northern Osage mines began …

Ore Reserves Estimation Of The Nam Nga Coal Deposit, Lao Pdr, Using Geostatistical Method, Tongvang Bliachongvang

Chulalongkorn University Theses and Dissertations (Chula ETD)

This research study focuses on estimating the coal deposit quantity and qualities as CV and AC at Nam Nga coal deposit, Lao PDR using OK and SGS geostatistical methods. A total of 295 assays data from 51 exploration drill holes collected from LID Company were used. The results reveal that OK produces geological resource of 2.2 MT with an average CV of 3,733 kcal/kg and an average AC of 48.68 %. The mineable reserve computed from OK's ultimate pit design and pit adjustment are 0.55 MT. The OK method produces 9.32 MT of wastes, yielding a stripping ratio of 10.4:1. …

Imaging And Mitigating Karst Features, Kenneth Joseph Bansah

Doctoral Dissertations

"Over the last three years, a comprehensive subsurface investigation that combines both conventional and geophysical techniques has been conducted near Springfield in southwest Missouri, United States. This study, which forms part of the comprehensive subsurface investigation, aimed to (1) image and characterize the subsurface, (2) map variations in engineering properties of soil/rock, (3) map variable depth to top of rock, (4) explore the utility of the geophysical techniques, (5) determine the factors contributing to karst processes, and (6) propose karst mitigation. Electrical resistivity tomography (ERT) and multichannel analysis of surface waves (MASW) were employed for the acquisition of subsurface geophysical …

Mitigation Of Environmental Hazards Of Sulfide Mineral Flotation With An Insight Into Froth Stability And Flotation Performance, Muhammad Badar Hayat

Doctoral Dissertations

"Today's major challenges facing the flotation of sulfide minerals involve constant variability in the ore composition; environmental concerns; water scarcity and inefficient plant performance. The present work addresses these challenges faced by the flotation process of complex sulfide ore of Mississippi Valley type with an insight into the froth stability and the flotation performance. The first project in this study was aimed at finding the optimum conditions for the bulk flotation of galena (PbS) and chalcopyrite (CuFeS₂) through Response Surface Methodology (RSM). In the second project, an attempt was made to replace toxic sodium cyanide (NaCN) with the biodegradable chitosan …

Computational Dynamics And Virtual Dragline Simulation For Extended Rope Service Life, Muhammad Wardeh

Doctoral Dissertations

"The dragline machinery is one of the largest equipment for stripping overburden materials in surface mining operations. Its effectiveness requires rigorous kinematic and dynamic analyses. Current dragline research studies are limited in computational dynamic modeling because they eliminate important structural components from the front-end assembly. Thus, the derived kinematic, dynamic and stress intensity models fail to capture the true response of the dragline under full operating cycle conditions. This research study advances a new and robust computational dynamic model of the dragline front-end assembly using Kane's method. The model is a 3-DOF dynamic model that describes the spatial kinematics and …

Investigation Of Environmental Cadmium Sources In Eastern Kentucky, Elizabeth Maher

Theses and Dissertations--Mining Engineering

Utilizing data collected by the University of Kentucky Lung Cancer Research Initiative (LCRI), this study investigated potential mining-related sources for the elevated levels of cadmium in Harlan and Letcher counties. Statistical analyses for this study were conducted utilizing SAS. A number of linear regression models and logarithmic models were used to evaluate the significance of the data. The linear regression models consisted of both simple and multivariate types, with the simple models seeking to establish significance between the potential sources and urine cadmium levels and the multivariate models seeking both to identify any statistically significant linear relationships between source types …

Dust Control Examination Using Computational Fluid Dynamics Modeling And Laboratory Testing Of Vortecone And Impingement Screen Filters, Ashish R. Kumar

Theses and Dissertations--Mining Engineering

Heavy industries, such as mining, generate dust in quantities that present an occupational health hazard. Prolonged exposure to the respirable dust has been found to result in many irreversible occupational ailments in thousands of miners. In underground mining applications, a variety of scrubbing systems are used to remove dust near the zones of generation. However, the wire-mesh type fibrous screens in the flooded-bed dust scrubbers used on continuous miners, are prone to clogging due to the accumulation of dust particles. This clogging results in a reduced capture efficiency and a higher exposure to the personnel. This research establishes the Vortecone, …

Management Of Coal Dust Explosions In United States' Coal Mines Using Bag Type Passive Explosion Barriers, Jay Robert Schafler

Masters Theses

"The most significant and powerful hazard that exists in an underground coal mine is a coal dust explosion. A coal dust explosion has the potential to propagate throughout a mine resulting in massive damage to the mine and equipment, as well as tragic loss of life. An assessment of current global regulations and practices uncovered four main control methods utilized to prevent coal dust explosions in coal mines world-wide. The United States is one of the few countries that does not regulate or employ all four of these safety practices. Additionally, a review of past research into coal dust explosions …

Shale Characterization And Size-Effect Study Using Scanning Electron Microscopy And X-Ray Diffraction, Debashis Das

Graduate Theses, Dissertations, and Problem Reports

Ground failure is a major contributor of the total fatalities in underground mines in the US. Underground coal mines in the Northern Appalachian region have weak roof rock mainly composed of shale and sandstone. Characterization of shale is indispensable for developing an effective ground control plan. However, this has not been done extensively. This thesis attempts to address this issue. It investigates the variation in mechanical properties of shale with variation in size. In addition, an attempt has been made to relate the strength of shale with its petrographic parameters. X-ray diffraction technique was used to estimate the compositional parameters …

The Effect Of Overloading On Reliability Of Wheel Loader Structural Components, Eric Raymond Achelpohl

Doctoral Dissertations

"This research attempts to provide a fundamental understanding into the relationship between the productivity of material handling equipment, specifically wheel loaders, and their ability to operate reliably when subjected to high overload conditions. The overall aim is to determine the effect of overloading the bucket on wheel loader reliability. The specific objectives of the research are to: 1) evaluate the effect of overloading the bucket on wheel loader productivity; 2) examine the effect of overloading the bucket on hydraulic pressures in the hoist cylinders (used as a proxy for forces on a wheel loader); and 3) investigate the effect of …

A New Signal Processing Method For Acoustic Emission/Microseismic Data Analysis, Charles Mborah

Doctoral Dissertations

"The acoustic emission/microseismic technique (AE/MS) has emerged as one of the most important techniques in recent decades and has found wide applications in different fields. Extraction of seismic event with precise timing is the first step and also the foundation for processing AE/MS signals. However, this process remains a challenging task for most AE/MS applications. The process has generally been performed by human analysts. However, manual processing is time consuming and subjective. These challenges continue to provide motivation for the search for new and innovative ways to improve the signal processing needs of the AE/MS technique. This research has developed …

Effects Of Monovalent Ions On Low Salinity Waterflooding In Shaly-Sandstone Reservoir, Ativish Yomchan

Chulalongkorn University Theses and Dissertations (Chula ETD)

Multi-component Ion Exchange (MIE) was proved to be a major mechanism occurred during Low Salinity Waterflooding (LSWF). Reduction of both total salinity and concentration of divalent ions of injected water together with a presence of monovalent ion results in dissolution of divalent ions linking between rock surface and oil. As a consequence, oil is liberated from rock surface. This study aims to study effects of monovalent ions in MIE mechanism. Stirring test is performed and results show that ion with less hydration radius tends to be more active in MIE; hence, potassium ion and cesium ion illustrate potential in oil …

Evaluation Of Wax Deposition Prevention For Crude Oil Production From Mae Soon Oil Field, Htet Myat Min

Chulalongkorn University Theses and Dissertations (Chula ETD)

Waxy crude oils are normally found in petroleum reservoirs. Crude oil with the wax formation is one of the crucial problems for flow assurance of pipeline transportation in oil and gas production. This issue can commonly cause wax deposition problem and it has made a huge amount of economic losses such as production, time and maintenance cost. Therefore, it is a critical aspect to deal with wax deposition for crude oil flow assurance, especially at the surface region in cold climate. In this study, n-heptane and poly (maleic anhydride-alt-1-octadecane) or MA as the inhibitors with different concentrations will be measured …

Effectiveness Of Ammonium Ion In Low Salinity Waterflooding In Shaly-Sandstone Reservoir, Hung Vu Quoc

Chulalongkorn University Theses and Dissertations (Chula ETD)

In this study was presented the pre-feasibility study of silica sand processing plant in Sihanoukville province. The resources approximately 8,750,000 tons, would be a high potential deposit for the glass industry. In this study focuses on the characteristics of the silica sand, methodology to remove the impurities which contained high Fe2O3, Al2O3 and another major oxide element, and economic evaluation technique. To identification of silica sand which used sieve analysis, Frantz isodynamic magnetic separator following by electrical microscope, XRD, and XRF. Therefore, to upgrade the quality of silica sand, which is using Shaking Table, Wet High-Intensity Magnetic Separator, and Reverse …

Pre-Feasibility Study Of Silica Sand Processing Plant In Sihanoukville Province, Cambodia, Sochea Ros

Chulalongkorn University Theses and Dissertations (Chula ETD)

Nowadays, bottom ash and flue gas desulfurization (FGD) gypsum are by-products of the coal combustion process from coal-fired power plant. Bottom ash has been applied in many applications such as landfill, cement industry etc., and FGD gypsum is applied in cement and wallboard industry. Also, they can be used in agricultural activities for soil amendment but the amount of bottom ash and FGD used in this function is still low. Furthermore, biochar has long been used to improve soil fertility. The positive impacts of biochar amendment on soils are that it can increase soil capacity to adsorb plant nutrients, decrease …

Utilization Of Biochar Coupled With Coal Combustion Products For Degraded Soil Amendment, Thidphavanh Sengsingkham

Chulalongkorn University Theses and Dissertations (Chula ETD)

Low Salinity Waterflooding (LSWF) has been intensively studied worldwide as it is a low-cost technique. By injecting water with very low salinity compared to formation water in the reservoir, the method changes equilibrium between rock surface, oil and surrounding water, causing wettability alteration through Multi-component Ion Exchange (MIE) mechanism. In this study, ammonium ion is added into low salinity water to facilitate the MIE mechanism in shaly-sandstones reservoir. Experiments are performed with shaly-sandstone rock as it contains both calcium and magnesium ions as part of clays and ammonium ion can express its potential by triggering MIE mechanism. Stirring test, spontaneous …

Improving Workers' Safety And Health In The Zimbabwean Mining And Quarrying Industry, Bernard Mabika

Walden Dissertations and Doctoral Studies

Lack of effective occupational safety and health (OSH) strategies is a reason that

workplace accidents in the mining and quarrying industry remain high, making the

industry one of the riskiest operations worldwide. The purpose of this multiple case study

was to explore successful strategies mining and quarrying leaders in Zimbabwe used to

improve OSH. The key research question addressed successful strategies leaders in the

mining and quarrying industry use to improve employee occupational safety and health in

Zimbabwe. Six successful business leaders from 3 mining and quarrying mines in

Zimbabwe demonstrated an exception to unsafe practices, particularly through their

exceptional …