Engineering Commons^™

Scaled Synthetic Aperture Radar System Development, Ryan K. Green

Master's Theses

Synthetic Aperture Radar (SAR) systems generate two dimensional images of a target area using RF energy as opposed to light waves used by cameras. When cloud cover or other optical obstructions prevent camera imaging over a target area, SAR can be substituted to generate high resolution images. Linear frequency modulated signals are transmitted and received while a moving imaging platform traverses a target area to develop high resolution images through modern digital signal processing (DSP) techniques. The motivation for this joint thesis project is to design and construct a scaled SAR system to support Cal Poly radar projects. Objectives include …

Virtual Antennas Using Metamaterials, Caglar D. Emiroglu

Doctoral Dissertations

Virtual antenna radiation at microwave frequencies using metamaterials is presented. Based on the transformation electromagnetics technique, the media embedding a physical antenna in a ground recess is designed such that the far-zone radiation pattern of a virtual antenna radiating above a flat conducting ground plane is reproduced. The antenna and a limited surrounding space above a ground plane is folded below the ground level, resulting in a physical antenna in a ground recess that is enclosed in transformation media. The electromagnetic specification of the media surrounding the physical antenna at the bottom of the recess is provided by a properly …

Improving Sea-Surface Remote Sensing Of Ocean Wind Vectors By Scatterometers, Joseph W. Sapp

Doctoral Dissertations

Though scatterometers have been used to sense global ocean surface wind vectors for over 40 years, there remain some significant shortcomings. The largest problems appear in retrieving the wind vector when the ocean is being driven by high wind speeds or when rain is present in the beam-illuminated volume. Geophysical model functions (GMFs) developed using data from high-wind events can improve retrievals at high wind speeds, but only if sufficient ground truth measurements exist in the scatterometer swath. Airborne scatterometers, such as the Imaging Wind and Rain Airborne Profiler (IWRAP) developed by the Microwave Remote Sensing Laboratory (MIRSL) at the …

A Study Of Direct Digital Manufactured Rf/Microwave Packaging, John W.I. Stratton

USF Tampa Graduate Theses and Dissertations

Various facets of direct digital manufactured (DDM) microwave packages are studied. The rippled surface inherent in fused deposition modeling (FDM) fabricated geometries is modeled in Ansoft HFSS, and its effect on the performance of microstrip transmission lines is assessed via simulation and measurement. The thermal response of DDM microstrip transmission lines is analyzed over a range of RF input powers, and linearity is confirmed over that range.

Two IC packages are embedded into DDM printed circuit boards, and their performance is analyzed. The first is a low power RF switch, and the second is an RF front end device that …

Numerical Studies And Optimization Of Magnetron With Diffraction Output (Mdo) Using Particle-In-Cell Simulations, Alireza Majzoobi

Electrical & Computer Engineering Theses & Dissertations

The first magnetron as a vacuum-tube device, capable of generating microwaves, was invented in 1913. This thesis research focuses on numerical simulation-based analysis of magnetron performance. The particle-in-cell (PIC) based MAGIC software tool has been utilized to study the A6 and the Rising-Sun magnetron structures, and to obtain the optimized geometry for optimizing the device performance. The A6 magnetron is the more traditional structure and has been studied more often. The Rising-Sun geometry, consists of two alternating groups of short and long vanes in angular orientation, and was created to achieve mode stability.

The effect of endcaps, changes in lengths …

Charging Level And Deposition Of Droplets In Electrostatic Painting, Husam Osman

Electronic Thesis and Dissertation Repository

The process of electrostatic painting has become a very important method of coating in a wide range of industrial applications including those used in the automobile industry. The general principle of spray coating is to deposit liquid droplets or solid powder particles on coated targets having various shapes. The electrostatic coating process consists of three main stages: droplet formation and charging, transportation and deposition. The complication of this process is caused by various factors, such as the physical properties of the material to be used, the appropriate electrical and mechanical conditions and the target surface to be coated, which affects …

A Study On 2.45 Ghz Bandpass Filters Fabricated With Additive Manufacturing, Nicholas Christian Arnal

USF Tampa Graduate Theses and Dissertations

Square open loop resonator (SOLR) bandpass filters fabricated with additive manufacturing techniques are presented and studied. One filter contains novel 3D capacitive plates used to enhance resonator coupling. The filters are centered at 2.45 GHz and loaded with capacitors for miniaturization as low as 21% that of a conventional SOLR bandpass filter. The pass-band insertion loss of the filters ranges from 3.8 dB to 5.5 dB and the 3 dB bandwidth ranges from 180 MHz to 250 MHz. Also, degradation in the effective conductivity of printed ink as a function of substrate roughness is analyzed. Finally, a study of dielectric …

The Effects Of Strain And Vacancies On The Electric And Vibrational Properties Of Ferroelectric Batio3 From First-Principles, Aldo Serge Michael Raeliarijaona

Graduate Theses and Dissertations

The studies of ferroelectricity (FE) are of technological significance because of the multitude of applicable properties that ferroelectric materials exhibit. The mastery, and control of these properties necessitate the knowledge of the fundamental physics governing these insulating materials.

In this dissertation I present the results of first-principles investigations of the behavior of the fundamental ferroelectric properties under strain, and in the presence of vacancies. In the first part I introduce the important FE properties, their common behavior, and their numerous valuable applications. Following this background on FEs, a review of theoretical methods is presented with topics such as: Density Functional …

Numerical Simulation Of Terahertz Wave Interaction With Breast Cancer Tumor Tissue Sections, Abayomi Omotola Omolewu

Graduate Theses and Dissertations

This thesis presents numerical simulation of terahertz (THz) wave interaction with breast cancer tumor tissue sections. The obtained results are expressed in THz images of heterogeneous material that mimics the excised breast cancer tissue sections. The finite-element software package ANSYS High Frequency Structural Simulator (HFSS) was used in this work. HFSS is a full wave frequency domain three-dimensional (3D) electromagnetic simulation package. In this work, four breast cancer tissue models based on pathology images were simulated and images of the models were obtained at 1 THz. An incident Gaussian beam was raster scanned over tissue model configurations and the reflected …

Fabrication Of Sub-10 Nm Metallic Structures Via Nanomasking Technique For Plasmonic Enhancement Applications, Stephen Joseph Bauman

Graduate Theses and Dissertations

One area of nanoscience that has become popular in recent years is the study of optics at the nanoscale. Due to enhanced fabrication techniques, new geometries and improved dimensional resolutions have been allowing the creation of nanostructures for use in this area. Nanoscale geometries cause unique optical effects such as enhancement of the signal’s electric field strength at the surface of a substrate. Specifically, structures separated by nanogaps (10 nm and smaller) have been shown to exhibit strong field enhancement within the gaps. This has opened up the potential for surface enhanced spectroscopies, enhanced absorption for photovoltaics, and improved sensing …

Minimizing Sheet Resistance Of Organic Photovoltaic Cell Top Contact Electrode Layer: Silver Nanowire Concentration Vs. Conductive Polymer Doping Concentration, Caitlyn Cook

Materials Engineering

The top contact electrode layers of nine organic photovoltaic cells were prepared with two varying factors: three Silver nanowire (AgNW) densities deposited on a conductive polymer doped with three concentrations. Silver’s low sheet resistance of 20-Ω/sq is hypothesized to lower the sheet resistance of the anode layer and thus enhance the overall efficiency of the cell. Four-point probe measurements indicated that increasing AgNW density in the top contact electrode layer of an organic photovoltaic cell significantly reduces sheet resistance from 52.2k-Ω/sq to 18.0 Ω/sq. Although an increase in doping concentration of the conductive polymer reduced sheet resistance in low AgNW …

Veloelectric: Creating A Device That Harvests Energy From Bicycles, Austin Hall, Daniel Stohr, Tj Fox

Mechanical Engineering

Long distance mountain bikers, bike-packers, and many bikers in developing countries rely on electrical devices for safety and communication. These specific groups of people operate in areas with little to no electricity, and often times have no power to sustain their devices. The purpose of this Cal Poly senior project, VeloElectric, was to design, build, and test a kinetic energy harvester for bicycles that can be used to charge common mobile devices via USB. This senior project team created a device that attaches directly to a bicycle and uses vibrations to generate energy, which in turn powers a variety of …

The Electric Reel For Soccer Fields, Stephen Taylor

Electrical Engineering

Painting a soccer field consumes too much time. The process of reeling the string after laying out string along the field needs to improve. As a result, my project addresses improvements in how the workers retrieve the string through the production of an electric reel. This electric reel allows the worker to have control of the speed, direction, and on/off state of the device. Direction control allows the user ability to reel and unwind the string. Variable speed allows the user to control how fast the reel unwinds and reels the string. The device gathers string in an orderly manner …

Sweep Stability Characterization Of A Vernier-Tuned Distributed Bragg Reflector (Vt-Dbr) All-Semiconductor Tunable Swept Laser System At 1550 Nm For Sensing Applications, Roric Christian Martens Biersach

Master's Theses

The short-term jitter and longer-term wander of the frequency sweep profile of a Vernier-Tuned Distributed Bragg Reflector (VT-DBR) laser at 1550 nm used in optical coherence tomography (OCT) and other sensing applications is characterized in this work. The VT-DBR has demonstrated success in source-swept OCT (SSOCT), performing both intensity and phase-sensitive OCT.

The purpose of this paper is to investigate one of the unique aspects of the VT-DBR laser that makes it successful in OCT: the stability of the linear optical frequency sweep. A highly stable linear optical frequency sweep implies benefits for further fiber sensing applications including fiber Bragg …

Characterization Of Two Vernier-Tuned Distributed Bragg Reflector (Vt-Dbr) Lasers Used In Swept Source Optical Coherence Tomography (Ss-Oct), Greg M. Bergdoll

Master's Theses

Insight Photonic Solutions Inc. has continued to develop their patented VT-DBR laser design; these wavelength tunable lasers promise marked image-quality and acquisition time improvements in SS-OCT applications.

To be well suited for SS-OCT, tunable lasers must be capable of producing a highly linear wavelength sweep across a tuning range well-matched to the medium being imaged; many different tunable lasers used in SS-OCT are compared to identify the optimal solution.

This work electrically and spectrally characterizes two completely new all-semiconductor VT-DBR designs to compare, as well. The Neptune VT-DBR, an O-band laser, operates around the 1310 nm range and is a …

Wide Band Embedded Slot Antennas For Biomedical, Harsh Environment, And Rescue Applications, Yun Seo Koo

Doctoral Dissertations

For many designers, embedded antenna design is a very challenging task when designing embedded systems. Designing Antennas to given set of specifications is typically tailored to efficiently radiate the energy to free space with a certain radiation pattern and operating frequency range, but its design becomes even harder when embedded in multi-layer environment, being conformal to a surface, or matched to a wide range of loads (environments).

In an effort to clarify the design process, we took a closer look at the key considerations for designing an embedded antenna. The design could be geared towards wireless/mobile platforms, wearable antennas, or …

Saturable Reactor For Power Flow Control In Electric Transmission Systems: Modeling And System Impact Study, Marcus Aaron Young Ii

Doctoral Dissertations

A Saturable Reactor for Power Flow Control (SRPFC) is a novel application of a concept well known to electronics and power electronics engineers that provides continuous modulation of line reactance by controlling the magnetization in a ferromagnetic core. The novelty of the SRPFC is the target application, which is power flow control in meshed electric power networks. Modulation of the line impedance occurs by altering the current in a DC winding to control the magnetization of the ferromagnetic core, thereby varying the reactance of the AC winding. The deployment of power system equipment, like SRPFC, requires careful planning and study …

Magnetic Amplifiers For Voltage Regulation Applications, Casey Morgan O'Grady

Electrical Engineering Undergraduate Honors Theses

The purpose of this thesis is to present research on magnetic amplifiers and to discuss how magnetic amplifiers are useful in voltage regulation applications. Beginning with a background in magnetics and magnetic properties, this thesis outlines the importance of the B-H curve and explains how to simulate the B-H curve of a saturable inductor using LtSpice. Furthermore, two saturable inductors can be aligned in antiparallel to create a magnetic amplifier. The theory of magnetic amplifiers is dated, but its simplistic design has benefits for modern applications. The magnetic amplifier acts as a variable impedance switch where a small amount of …

Top-Down Aluminum Induced Crystallization For Photovoltaics, Seth Daniel Shumate

Graduate Theses and Dissertations

Passivating silicon solar cell surfaces is critical to fabricating very high efficiency and low cost photovoltaic devices. The sun-facing surface of the solar cell, known as the emitter, is particularly important when designing a solar cell. This work focused first on an alternative method of forming the emitter of silicon solar cells, and secondly on a method for improving the surface passivation of both these non-traditional and standard n-type solar cells.

Top-down aluminum induced crystallization (TAIC) was used for forming a polycrystalline silicon layer from amorphous silicon using aluminum to catalyze the crystallization at much lower temperatures than otherwise possible. …

Enhancement Of The Performance Of Gaas Based Solar Cells By Using Plasmonic, Anti-Reflection Coating And Hydrophobic Effects, Yahia Fayiz Makableh

Graduate Theses and Dissertations

Investigation of renewable energy resources is gaining huge momentum in recent years due to the limited fossil fuels, and their detriment impact on the environment. Solar energy is promising to meet the increased energy demand. In order to achieve this goal, solar energy has to be harvested efficiently at low cost. Therefore, higher efficiency solar cells are the primary focus of research worldwide. Photovoltaics based on InAs/GaAs intermediate band solar cells and their device performance enhancements are investigated in this dissertation. The device enhancement is carried out by surface modification methods. The dissertation work is inspired by the need of …

Single-Walled Carbon Nanotube Arrays For High Frequency Applications, Asmaa Elkadi

Graduate Theses and Dissertations

This dissertation presents a thorough analysis of semiconducting Single-Walled Carbon Nanotube-based devices, followed by a test structure fabrication and measurements.

The analysis starts by developing an individual nanotube model, which is then generalized for many nanotubes and adding the parasitic elements. The parasitic elements appear when forming the device electrodes degrade the overall performance.

The continuum model of an individual nanotube is developed. A unique potential function is presented to effectively describe the electron distribution in the carbon nanotube subsequently facilitating solving Schrödinger's equation to obtain the energy levels, and to generalize the model for many nanotubes.

It is shown …

Fusion Of Short-Mid Wavelength Infrared Image And Long Wavelength Image Using Discrete Wavelet Transform For Image Quality Enhancement, Rocky Hedrick

Electrical Engineering Undergraduate Honors Theses

Infrared technology advancements have led to an expansive set of infrared applications in both the private and public sectors. New materials and manufacturing techniques have continued to reduce the cost while improving the quality of infrared cameras, but the cost is still high when compared to the cost versus quality of visible light spectrum cameras. Innovative image processing techniques can be implemented to help bridge this gap between the cost and quality of infrared cameras. The goal of this research is to improve the overall quality of infrared imaging by fusing short-mid wavelength infrared images and long wavelength images of …

Reducing Radio Frequency Susceptibilities In Commercial-Off-The-Shelf Camera Equipment For Use In Electromagnetic Compatibility Testing, Kevin Mainini

Electronic Theses and Dissertations

The Technical Testing and Analysis Center (TTAC) Group at Oak Ridge National Laboratory performs electromagnetic compatibility testing on various radiation detection units. These tests require remote viewing of the equipment’s display to monitor its compliance with national and international standards. The Commercial-Off-the-Shelf (COTS) camera equipment that is used to monitor the displays exhibits radio frequency susceptibilities causing issues when determining the actual susceptibilities of the device under test. In order to mitigate this issue, a COTS camera was placed in two common test positions and cycled through three angled orientations with various radio frequency shielding methods applied. The development of …

Characterization Of Silicon Phosphorus Alloy For Device Applications, Larry C. Cousar

Graduate Theses and Dissertations

A new material of highly-phosphorus doped silicon for device applications was characterized and analyzed for new material properties. Devices such as NMOS transistors and other CMOS compatible devices may benefit from new materials that reduce external resistances and increase drive currents.

Material characterization requires numerous techniques and technologies to determine electrical, optical, and physical characteristics. For this work, Hall measurement, X-ray Diffraction, Raman Spectroscopy, Photoluminescence Characterization, and Spectroscopic Ellipsometry were used to better understand this new material. The results may lead to new models for silicon phosphorus alloys.

Large-Scale Graphene Film Deposition For Monolithic Device Fabrication, Khaled Al-Shurman

Graduate Theses and Dissertations

Since 1958, the concept of integrated circuit (IC) has achieved great technological developments and helped in shrinking electronic devices. Nowadays, an IC consists of more than a million of compacted transistors.

The majority of current ICs use silicon as a semiconductor material. According to Moore's law, the number of transistors built-in on a microchip can be double every two years. However, silicon device manufacturing reaches its physical limits. To explain, there is a new trend to shrinking circuitry to seven nanometers where a lot of unknown quantum effects such as tunneling effect can not be controlled. Hence, there is an …

Circular Bessel Field Statistics And The Pursuit Of Far-Subwavelength Resolution, Yulu Chen

Open Access Dissertations

The statistical description of wave propagation in random media is important for many applications. While polarized light in systems with weakly interacting scatterers and sufficient overall scatter has zero-mean circular Gaussian statistics, the underlying assumptions break down in the Anderson localization and weakly scattering regimes. Although probability density functions for wave intensity and amplitude exist beyond Gaussian statistics, suitable statistical descriptions for the field with strong and weak random scatter were unknown. The first analytical probability density function for the field that is effective in both the Anderson localization regime and the weakly scattering regime is derived by modeling the …

Isogeometric Analysis For Electromagnetism, Tahsin Khajah

Mechanical & Aerospace Engineering Theses & Dissertations

The combination of numerical analysis with the scanning technology has been seeing increased use in many research areas. There is an emerging need for high-fidelity geometric modeling and meshing for practical applications. The Isogeometric Analysis (IGA) is a comprehensive computational framework, which integrates geometric modeling and meshing with analysis. Different from other existing numerical methods, the IGA can generate analysis ready models without loss of geometrical accuracy. In IGA, the continuity and the quality of a solution can be conveniently controlled and refined. These features enable IGA to integrate modeling, analysis, and design in a unified framework, the root idea …

Computational Electromagnetic Studies For Low-Frequency Compensation Of The Reflector Impulse-Radiating Antenna, Casey E. Fillmore

Theses and Dissertations

The reflector impulse-radiating antenna (IRA) is considered to meet the requirement for a wideband, directional antenna with short temporal response and small electrical footprint. Standard reflector IRA designs are modeled and performance is simulated using full-wave computational electromagnetic (CEM) software. Characterization of the standard designs reveals the possible existence of wide, frequency-independent backlobes containing nearly 40% of the radiated power at high frequencies. These undesirable backlobes have never been hypothesized, predicted or measured, likely due in part to their alignment outside the primary measurement planes. At the lowest operating frequencies, the reflector IRA is unaffected by backlobes, but is characterized …

Development Of Infrared And Terahertz Bolometers Based On Palladium And Carbon Nanotubes Using Roll To Roll Process, Amulya Gullapalli

Masters Theses

Terahertz region in the electromagnetic spectrum is the region between Infrared and Microwave. As the Terahertz region has both wave and particle nature, it is difficult to make a room temperature, fast, and sensitive detector in this region. In this work, we fabricated a Palladium based IR detector and a CNT based THz bolometer.

In Chapter 1, I give a brief introduction of the Terahertz region, the detectors already available in the market and different techniques I can use to test my detector. In Chapter 2, I explain about the Palladium IR bolometer, the fabrication technique I have used, and …

Broadband Coherent Perfect Absorption In One-Dimensional Optical Systems, Massimo Maximilian Villinger

Electronic Theses and Dissertations

Absorption plays a critical role in a variety of optical applications – sometimes it is desirable to minimize it as in optical fibers and waveguides, or to enhance it as in solar cells and photodetectors. We describe here a new optical scheme that controllably produces high optical absorption over a broad wavelength range (hundreds of nm) in systems that have low intrinsic absorption over the same range. This effect, 'coherent perfect absorption' or CPA, arises from a subtle interplay between interference and absorption of two beams incident on a weakly absorbing medium. In the first part of this study, we …