Engineering Commons^™

An Stm Study On The Structure Of Pt(100)/Ionic Liquid Omipf6 Interface, Jin Peng, Mian-Gang Li, Li-Qiang Xie, Jia-Wei Yan, Bing-Wei Mao

Journal of Electrochemistry

Potential-dependent structures of Pt(100)/ionic liquid 1-methyl-3-octylimidazolium hexafluorophosphate (OMIPF₆) interface have been studied by electrochemical scanning tunneling microscopy (ECSTM). The cation OMI⁺ forms ordered structure on Pt(100) surface, which exists in a potential region of about 1.2 V. When the potential is more negative than -0.6 V, it can be seen that the ordered structure transforms to disordered structure. When the potential shifts positively to +0.6 V, the desorption of cations OMI⁺ occurs, which indicates that strong electrostatic repulsion is needed to overcome chemical interaction between OMIPF6 and Pt(100) surface, leading to the desorption. The above results …

Hydrogen Evolution Properties On Individual Mos2 Nanosheets, Yu Gao, Juan Zhou, Yu-Wen Liu, Sheng-Li Chen

Journal of Electrochemistry

Molybdenum disulfide (MoS₂) has been acknowledged to play important roles in hydrogen evolution reaction (HER) for hydrogen energy technology. Both computational and experimental results have suggested that the promising catalytic activity of MoS₂ for the HER could be attributed to the sulfur edges of two-dimensional nanosheets, while their basal planes were catalytically inert. In order to verify this conclusion, we prepared single MoS₂ sheet electrodes which were made of individual MoS₂ sheets attached on the self-assembly monolayers (SAM) of SH(CH₂)₁₅COOH at Au ultramicroelectrodes (Au/SAM/MoS₂). The single MoS₂ sheet …

A Study On The Oxidation Of Hydrogen Peroxide At Au(111) And Au(100) Electrodes, Yong-Li Zheng, Jie Wei, Yan-Xia Chen

Journal of Electrochemistry

The oxidation reactions of hydrogen peroxide (H₂O₂) at Au(111) and Au(100) electrodes in 0.1 mol·L^-1 HClO₄ were investigated by using rotating disk electrode system. It was found that H₂O₂ could be readily oxidized to O₂ at both Au(100) and Au(111) surfaces with the onset potential close to its equilibrium potential. In contrast, the onset overpotential for H₂O₂ reduction was above 0.4 V, while the onset overpotential for H₂O₂ oxidation at Au(100) was ca. 0.1 V more negative than that at Au(111), this is probably …

Lithium-Sulfur (Selenium) Batteries: Interface Issues And Solving Strategies, Nian-Wu Li, Ya-Xia Yin, Yu-Guo Guo

Journal of Electrochemistry

The stable interface is still a challenge for lithium-sulfur (selenium) batteries because of the low conductivity of sulfur (selenium), dissolution of polysulfide (polyselenide), volume expansion of sulfur (selenium), and lithium dendrite growth. This review describers some recent developments in lithium-sulfur (selenium) batteries and highlights our efforts in this field. The possible strategies for building stable interface in the lithium-sulfur (selenium) batteries including nano-restriction effect, chemical bonding, interface adsorption, surface coating, electrolyte optimization, and Lithium anode treatment have been discussed.

Syntheses Of Ag@Pd@Pt Nanoparticles With Tunable Shell Thickness For Electrochemical Oxidation Of Formic Acid, Xiao-Dong Lin, Du-Hong Chen, Zhong-Qun Tian

Journal of Electrochemistry

In an effort to lower cost of a catalyst, the silver (Ag) core with palladium (Pd) layer then platinum (Pt) island (Ag@Pd@Pt) nanoparticles were synthesized and the electrocatalytic activity of Ag@Pd@Pt nanoparticles on formic acid was compared with that of Au@Pd@Pt nanoparticles reported previously. The results showed that the existence of a small amount of Pt could significantly improve the activity of the catalyst. When the surface coverage of Pt approached 0.5 monolayers, the activity of Ag@Pd@Pt nanoparticles reached the maximum. Though the onset potential of the electro-oxidation was slightly more positive (about 50 mV), the overall electrocatalytic activity of …

Chitosan/Nonahydrate Gel Derived Fe-N-Doped Porous Carbon Sheet As High-Efficient Orr Electrocatalyst, Fan-Lu Meng, Xin-Bo Zhang, Jun-Min Yan

Journal of Electrochemistry

The chitosan/nonahydrate gel was used as a precursor to realize the uniform mixture of N-polymer and metal salt. After lyophilization treatment, the gel went through heat treatment and acid etch. Accordingly, the Fe-N-doped porous carbon sheet with homogenous composition and microstructure was prepared. Compared with the commercial Pt/C catalyst, the Fe-N-doped porous carbon sheet exhibited more positive onset potential and half-wave potential, higher current density, and especially, excellent durability. The power density of 318 mW·cm^-2 was obtained in alkaline fuel cell with the Fe-N-doped porous carbon sheet as a cathode catalyst, which is higher than 267 mW·cm^-2 with …

Synthesis Of Ultrathin Co3O4 Nanoflakes Film Material For Electrochemical Sensing, Hui-Juan Wang

Journal of Electrochemistry

Ultrathin cobalt oxide (Co₃O₄ ) nanoflakes film material was synthesized by using an electro-deposited cobalt layer as a raw material through a simple oxidation method and followed by a heat treatment at 350 ^oC. The physical characterizations of the Co₃O₄ nanoflakes film were performed by scanning electron microscopy (SEM), X-ray diffraction (XRD) and transmission electron microscopy (TEM) technologies, and the electrochemical activity was measured by cyclic voltammetry (CV). As a promising material for electrochemical sensing, the as-synthesized ultrathin Co₃O₄ nanoflakes film material exhibited excellent electrochemical activity for H₂O …

Legal And Regulatory Framework Of Nuclear Security In Indonesia, Dahlia Cakrawati Sinaga

International Journal of Nuclear Security

Nuclear security is one of the most important topics for regulatory purposes in Indonesia. Nuclear security measures exist to prevent, detect, and respond to unauthorized removal of radioactive material and the sabotage of nuclear and radiation facilities. Indonesia participates in bilateral and multilateral cooperation and international events such as the Nuclear Security Summit. Indonesia has also ratified several international instruments related to nuclear security. Based on commitment to international events and ratification, Indonesia has developed nuclear security infrastructures by strengthening legislation and regulation, enhancing building capacity, and strengthening equipment and facilities. Badan Pengawas Tenaga Nuklir (BAPETEN) is Indonesia’s nuclear energy …

Modified Fault Tree Method For Vulnerability Analysis Of Nuclear Medicine Facility Security System Case Study: Radiotherapy Facility, Sardjito General Hospital, Haryono Budi Santosa

International Journal of Nuclear Security

Assessing the vulnerability of physical protection systems (PPS) in nuclear medicine facilities is needed to prevent a security incident that could lead to the malicious use of nuclear material. Theft and sabotage of nuclear materials is becoming globally recognized. The current methods of assessing vulnerability tend to be oriented toward complex nuclear security; consequently, it is excessive to use such methods in simple facilities (i.e., radiotherapy facilities in hospitals).

The fault tree analysis is a method to assess vulnerability for a simple nuclear facility. The method’s primary events (i.e., basic events and undeveloped events) are able to accommodate fault causes …

Nuclear Security Culture And Batan’S Assessment: Batan’S Experience, Anhar R. Antariksawan

International Journal of Nuclear Security

Organizations should increase safety to minimize the harmful effects of nuclear materials. Additionally, organizations should take measures to protect security culture within the organization itself. This paper covers the National Nuclear Energy Agency of Indonesia’s (BATAN’s) promotion of nuclear security culture and self- assessment projects, which is based on the International Atomic Energy Agency’s (IAEA) methodology.

Table Of Contents

International Journal of Nuclear Security

No abstract provided.

From The Editor’S Desk

International Journal of Nuclear Security

No abstract provided.

Nuclear Security Risk Analysis: An Insider-Outsider Collusion Scenario, Mohammad A. Hawila, Sunil S. Chirayath

International Journal of Nuclear Security

This study analyses the vulnerability of the physical protection system (PPS) deployed at a hypothetical facility. The PPS is designed to prevent and eliminate threats to nuclear materials and facilities. The analysis considers possible outsider and insider threats. A modified adversary sequence diagram (ASD) evaluates threat pathways to test an insider-outsider collusion case. The ASD also measures the probability of adversary interruption by demonstrating the methodology for a typical nuclear facility.

Opportunities And Challenges In Developing Nuclear Security In Africa, James Larkin Mfr

International Journal of Nuclear Security

Those involved in nuclear security recognize that regions of significant instability in Africa have an impact on the safety and security of the continent's nuclear material and un-enriched uranium; however, some countries outside of continental Africa have taken counterproductive approaches to this issue. Despite challenges, the nuclear security community continues to develop and apply appropriate levels of nuclear security where needed. The community also takes every opportunity to make significant contributions to the global discourse on nuclear security culture.

Effects Of Transportation Hazards On High Barrier Flexible Packaging Films, Kyle Dunno

Journal of Applied Packaging Research

Two flexible food packaging barrier material film structures were employed for this research study to evaluate the effects of over-the-road truck transport. The films containing different barrier materials, ethylene-vinyl alcohol (EVOH) or aluminum oxide (AlOx), were selected based on their abundant use within the flexible food packaging arena. Pouches were formed and filled with tomato paste before being thermally processed then palletized for shipment. Pouches were shipped over-the-road via truck transport a distance of 2,500 miles. After transport, the oxygen transmission rate (OTR) of the pouches located on the bottom and top layers of the palletized loads were obtained and …

Leveraging Lexical Link Analysis (Lla) To Discover New Knowledge, Ying Zhao, Douglas J. Mackinnon, Shelley P. Gallup, Joseph L. Billingsley

Military Cyber Affairs

Lexical Link Analysis (LLA) is a form of text mining in which word meanings represented in lexical terms (e.g., word pairs) are treated as if they are in a community of a word network. LLA can provide automated awareness for analyzing text data and reveal previously unknown, data-driven themed connections. We applied LLA to develop authentic archetypes and conversely determine potential imposters of that same archetype. We use publically available social media data to develop a cyber professional as an example. This paper reports the development of the algorithm, the collection and labeling of data, as well as the results …

Art-Integration Through Making Dioramas Of Women Mathematicians’ Lives Enhances Creativity And Motivation, Audrey C. Rule, Dana L. Atwood-Blaine, Clayton M. Edwards, Mindy M. Gordon

Journal of STEM Arts, Crafts, and Constructions

Creativity is essential for solving problems in the workplace, natural environment, and everyday life, necessitating that creativity be nurtured in schools. Identification of factors that intrinsically motivate students to learn difficult or initially unappealing content is also important. This project, in which 24 racially diverse fifth grade girls created dioramas of the lives of diverse successful women mathematicians, explored the girls’ reactions to art integration into mathematics through a phenomenological qualitative analysis of their products, essays, and responses to questionnaires. The project supported the Next Generation Science Standard for engineering design, Standard 3-5-ETS1-1 and two National Core Arts Standards for …

Three- And Four-Year Olds Learn About Gears Through Arts Incorporation, Dessy Stoycheva, Leann M. Perkins

Journal of STEM Arts, Crafts, and Constructions

This research paper explores art integration into a science lesson unit that follows the Next Generation Science Standards (K-PS2-1) and focuses on the effects on memory retention of key concepts along with levels of enjoyment. An experiment was conducted with children ages 3 and 4 teaching scientific concepts about gears while incorporating student-made art products. The children were assigned to alternating experimental (art-integrated) or control (no art) conditions during the four stages of the lesson. The results did not show statistically significant differences at the alpha = 0.05 level between conditions in the amount of information retained based on the …

Fourth Graders Make Inventions Using Scamper And Animal Adaptation Ideas, Mahjabeen Hussain, Anastasia Carignan

Journal of STEM Arts, Crafts, and Constructions

This study explores to what extent the SCAMPER (Substitute, Combine, Adapt, Modify, Put to another use, Eliminate, and Rearrange) technique combined with animal adaptation ideas learned through form and function analogy activities can help fourth graders generate creative ideas while augmenting their inventiveness. The sample consisted of 24 fourth grade students (14 female, 10 male) ages 9-10 at a suburban Midwestern elementary school. A repeated-measures design involving all participants alternately in the two conditions measured students under each treatment condition. In the experimental condition, students used SCAMPER charts with animal adaptation ideas to generate ideas to improve a product using …

Second-Graders Beautify For Butterflies, Andrea E. Anderson, Jessica A. Meier

Journal of STEM Arts, Crafts, and Constructions

This practical article presents activities that support previous research suggesting the integration of art with science is beneficial to the learning and cooperative processes of children. The project showcased here highlights the ability of elementary school children to collaborate with their peers for problem solving and critical thinking through the artistic use of observation and sketching. This article discusses effective lesson activities in which students combined art and science by creating and cultivating a butterfly garden on the school’s property.

Who Moved Those Rain Clouds To Town? Making Windbirds To Learn About The Power Of Wind, Deepanee Samarakoon, Latisha L. Smith

Journal of STEM Arts, Crafts, and Constructions

In this practical article, a kindergarten teacher shares a lesson designed to teach students about the power of wind. To address the Next Generation Science Standards engineering standards, students discussed the negative and positive aspects of wind and made daily weather observations (K-ESS2-1). Students constructed bird-shaped windsocks, called windbirds, to explore how the shape of the object allowed it to move in the wind (K-2-ETS1-2). To address the National Core Arts Standards, creative arts were integrated as students designed cylindrical windbirds of colorful materials. The windbirds were used to observe the effects of wind in the students’ outdoor environment at …

Water Play, Jane E. Cline, Brandy A. Smith

Journal of STEM Arts, Crafts, and Constructions

The inclusion of activities to develop sensory awareness, spatial thinking, and physical dexterity, operationalized through hands-on science lessons such as water play, have long been part of early childhood education. This practical article addresses Next Generation Science Standards K-2 ETS1-3 and K-2 ETS1-2 by having four-year-old prekindergarten students direct the path of water on a vertical pegboard water table with strategically-placed, attached plastic cups with holes drilled into them that leak streams of water into each other. Students enhanced their retelling of the story of the Billy Goats Gruff by placing student-made watercolor artwork along the path of the water, …

Using Creativity From Art And Engineering To Engage Students In Science, Mason Albert Kuhn, Scott Greenhalgh, Mark Mcdermott

Journal of STEM Arts, Crafts, and Constructions

STEAM education, referring to integrated Science, Technology, Engineering, Art, and Mathematics, is a contemporary buzzword that is popular in many schools. In particular, many elementary school teachers who have been tasked to incorporate STEM teaching, because of the requirements of the Next Generation Science Standards, attempt to apply the arts in their science curriculum because they feel more comfortable using instructional approaches that incorporate creative activities such as crafts, drawing, and model construction than the core practices of STEM disciplines. Teachers can use the creative arts activities in two ways to enhance the STEM learning environment: 1) Using creative processes …

Spatial Thinking Skills And Stem Connections: How Does This Issue Address Them?, Audrey C. Rule

Journal of STEM Arts, Crafts, and Constructions

In this editorial, the Editor considered the importance of spatial thinking skills to STEM careers, provided examples of ways scientists use spatial thinking, noted sex and socioeconomic differences in spatial skill proficiency, and reviewed ways that activities included in articles in this issue involved spatial thinking. Brief summaries and preview images were provided for the articles in the issue. The four-component spatial thinking classification scheme with categories of intrinsic-static, intrinsic-dynamic, extrinsic-static and extrinsic dynamic was applied to the activities from this issue of the Journal of STEM Arts, Crafts, and Constructions. All categories of this classification scheme were addressed, providing …

Recent Semantic Changes For The Term "Digital", Tore Brattli

Proceedings from the Document Academy

The term digital originates from the Latin word for finger/counting and has for many years been used to denote discrete signals and information, as opposed to analog. Discrete representation is an important principle, not only in computers, but also for (printed) text, music scores and even our genes. Recently however, the use of the term has increased and the meaning expanded to include almost everything related to information technology, e.g. digital natives and digital addiction. This study investigates the core principles of digital representation and compares this concept with the recent usage, with a focus on Norwegian media. The purpose …

Development Of A Problem-Based Learning Matrix For Data Collection, Shannon M. Sipes

Interdisciplinary Journal of Problem-Based Learning

Few of the papers published in journals and conference proceedings on problem-based learning (PBL) are empirical studies, and most of these use self-report as the measure of PBL (Beddoes, Jesiek, & Borrego, 2010). The current study provides a theoretically derived matrix for coding and classifying PBL that was objectively applied to official curriculum documentation in a content analysis. The results for the level of problem-based learning in two engineering program curricula are presented. By introducing such a matrix, this study offers a tool that can be applied by other scholars examining PBL, creating consistency in methodology, definitions, and language among …

Scitech News Volume 70, No. 4 (2016)

Sci-Tech News

Columns and Reports

From the Editor 3

Division News

Science-Technology Division 4

SLA Annual Meeting 2016 Report (S. Kirk Cabeen Travel Stipend Award recipient) 6

Reflections on SLA Annual Meeting (Diane K. Foster International Student Travel Award recipient) 8

SLA Annual Meeting Report (Bonnie Hilditch International Librarian Award recipient)10

Chemistry Division 12

Engineering Division 15

Reflections from the 2016 SLA Conference (SPIE Digital Library Student Travel Stipend recipient)15

Fundamentals of Knowledge Management and Knowledge Services (IEEE Continuing Education Stipend recipient) 17

Makerspaces in Libraries: The Big Table, the Art Studio or Something Else? (by Jeremy Cusker) 19

Aerospace Section of …

Pilot Source Study 2015: An Analysis Of Far Part 121 Pilots Hired After Public Law 111-216—Their Backgrounds And Subsequent Successes In Us Regional Airline Training And Operating Experience, Guy Smith, Elizabeth Bjerke, Maryjo Smith, Cody Christensen, Thomas Carney, Paul Craig, Mary Niemczyk

Journal of Aviation Technology and Engineering

This report is the second in a series entitled Pilot Source Study 2015. Public Law 111-216 (Airline Safety and Federal Aviation Administration Extension Act of 2010) and the subsequent FAA regulation changed pilot hiring for US air carriers operating under 14 CFR Part 121. The Pilot Source Study 2015 was designed to determine the effect of Public Law 111-216 on US regional airlines after its effective date, August 1, 2013. The study collected records for 6,734 FAR Part 121 regional airline pilots to determine the effect of pilots’ backgrounds on their performance in regional airline training and operations. A previous …

Characterization And Utilization Of Calcium Oxide (Cao) Thermally Decomposed From Fish Bones As A Catalyst In The Production Of Biodiesel From Waste Cooking Oil, Aldes Lesbani, Sabat Okta Ceria Sitompul, Risfidian Mohadi, Nurlisa Hidayati

Makara Journal of Technology

Thermal decomposition of fish bones to obtain calcium oxide (CaO) was conducted at various temperatures of 400, 500, 800, 900, 1000, and 1100 °C. The calcium oxide was then characterized using X-ray diffractometer, FTIR spectrophotometer, and SEM analysis. The calcium oxide obtained from the decomposition at 1000 °C was then used as a catalyst in the production of biodiesel from waste cooking oil. Diffraction pattern of the calcium oxide produced from decomposition at 1000 °C showed a pattern similar to that of the calcium oxide produced by the Joint Committee on Powder Diffraction Standard (JCDPS). The diffractions of 2q values …

Effect Of Milling On The Densification Of Sic-Basedcomposites From Polysilazane, Alfian Noviyanto, Toshiyuki Nishimura

Makara Journal of Technology

High density SiC-based composites from polysilazane were fabricated by high energy milling and hot pressing. After cross-linking at 200 °C, the polysilazane was pyrolysed at 1000 °C in N2 for 2 h to form amorphous Si-C-N-O followed by high energy milling for 1 h. Milled amorphous Si-C-N-O was sintered in hot pressing at 1600 and 1700 °C for 1 h in vacuum under the applied pressure of 50 MPa. Although no sintering additives were used, dense SiC-based composites were obtained with this method. Sintered density was 3.04 g/cm3, while only 2.57 g/cm3 for amorphous Si-C-N-O without milling. It is suggested …