Engineering Commons^™

Remote Pilot Situational Awareness With Augmented Reality Glasses: An Observational Field Study, Jeffery Coleman, David Thirtyacre

International Journal of Aviation, Aeronautics, and Aerospace

With the use of small unmanned aerial systems (sUAS) proliferating throughout industry and public safety, it is imperative to ensure safety of flight. The Federal Aviation Administration (FAA) published regulations for commercial use of sUAS in 2016 and included the requirement to maintain visual line-of-sight with the aircraft at all times. However, due to the nature of the sUAS ground control stations (GCS), remote pilots time-share between observing the aircraft and interacting with the display on the GCS. Time-sharing between the aircraft and GCS can be seen as similar to the cross-check a pilot uses when flying a manned aircraft. …

Emotional Intelligence And Safety Citizenship Among Army Aviators, Zachary T. Dugger, Bernadette Mccrory

International Journal of Aviation, Aeronautics, and Aerospace

The purpose of this study was to develop an understanding of the relationship between trait emotional intelligence and safety citizenship among United States Army aviators. The study includes analysis of survey responses from 29 individual aviators. Regression analysis was performed to evaluate the relationship between safety citizenship, emotional intelligence, and 15 emotional intelligence facets. Results indicate a significant association (F(1,28) = 15.45; p = 0.001) between safety citizenship and emotional intelligence, and between safety citizenship and 3 emotional intelligence facets: Adaptability (F(1,25) = 23.91; p < 0.001), Self Esteem (F(1,25) = 10.75; p = 0.003), and Optimism (F(1,25) = 8.71; p = …

Comparative Study On The Prediction Of Aerodynamic Characteristics Of Mini - Unmanned Aerial Vehicle With Turbulence Models, Somashekar V, Immanuel Selwyn Raj A

International Journal of Aviation, Aeronautics, and Aerospace

When dealing with CFD simulations the turbulent nature is seen on most of the engineering flows and these flows need to be solved. Reliable and applicable CFD outputs can be obtained from the accurate modelling of the turbulence as it is one of the most vital elements of CFD modelling. The RANS equations are extensively employed to analyse the complex flows over aircraft and for this purpose, a turbulence model is needed for turbulent flow analyses. Compatible turbulence must be chosen for the exact predictions of aircraft aerodynamic characteristics. In this report, numerical analyses of Mini-UAV are done to compare …

Pilot Visual Detection Of Small Unmanned Aircraft On Final Approach During Nighttime Conditions, Jon M. Loffi, Ryan J. Wallace, Samuel M. Vance, Jamey Jacob, Jared C. Dunlap, Taylor A. Mitchell, Dane C. Johnson

International Journal of Aviation, Aeronautics, and Aerospace

In December 2020, the Federal Aviation Administration (FAA) announced the release of a new final rule, permitting operators of small unmanned aircraft systems (sUAS) to perform routine night operations. Public comments to the Notice of Proposed Rulemaking indicated potential safety concerns regarding a pilot’s ability to spot a low-altitude sUAS during nighttime conditions. Leveraging data from the FAA’s UAS Sighting Report Database, the research team evaluated the significance of aircraft encounters with UAS at night. Researchers conducted an inflight experiment in which 10 pilots performed an instrument approach to airport during nighttime conditions in which a multi-rotor sUAS presented a …

Identification Of Wind-Induced Hazard Zones Impacting Uas Bridge Inspection, Jack J. Green, John Mott

International Journal of Aviation, Aeronautics, and Aerospace

Unmanned Aerial Systems (UAS) continue to grow in both popularity and utility within the national airspace system. The use of commercial UAS for civil inspection, specifically that of bridge structures, is becoming commonplace among practitioners and academics alike. The development of an integrated bridge-inspection hazard model provides a way for UAS operators to prepare for and respond to changing environmental conditions that could otherwise prevent a successful UAS flight. The interaction of wind-induced airflow with bridge surfaces creates an aerodynamic wake that can result in hazardous conditions for a UAS platform operating in close proximity. An analysis of this airflow …

Aviation Culture: A ‘Glass Sky’ For Women Pilots - Literature Review, Ivana Gorlin, Donna Bridges

International Journal of Aviation, Aeronautics, and Aerospace

This paper reports on a review of literature covering gender issues in aviation. It considers the impacts of aviation culture on women pilots. The focus of the review was on empirical studies over a 25-year period (1996-2020). Two research questions underpin the review; firstly, we investigated how aviation culture impacts women pilots’ experiences, secondly, we considered its effect on women as pilots. Using a hermeneutic methodological framework, we found that cultural attitudes towards women pilots in the aviation industry are biased and discriminatory. The studies in the review overwhelming concur that the hegemonic masculine culture that dominates aviation significantly diminishes …

A Mathematical Analysis Of The Wind Triangle Problem And An Inquiry Of True Airspeed Calculations In Supersonic Flight, Leonard T. Huang, Lisa I. Cummings

International Journal of Aviation, Aeronautics, and Aerospace

In the first half of this paper, we present a fresh perspective toward the Wind Triangle Problem in aerial navigation by deriving necessary and sufficient conditions, which we call "go/no-go conditions", for the existence/non-existence of a solution of the problem. Although our derivation is based on simple trigonometry and basic properties of quadratic functions, it is mathematically rigorous. We also offer examples to demonstrate how easy it is to check these conditions graphically. In the second half of this paper, we use function theory to re-examine another problem in aerial navigation, namely, that of computing true airspeed — even in …

Folding Methodology For Flexible Aircraft Interiors, Aditya Venkatesh, Fengfeng (Jeff) Xi, Joon Chung

International Journal of Aviation, Aeronautics, and Aerospace

This paper establishes a general furniture folding methodology that is aimed at flexible aircraft cabin interiors. This methodology will allow users to modify existing furniture pieces to their liking and thereby customizing their overall travel experience. The folding methodology also includes a process to quantify the transformation of the furniture pieces. This paper also introduces two design concepts called Open-on-Demand and Reconfiguration to allow passengers to modify an otherwise rigid cabin. The advantages of the multi-functional space saving furniture pieces are also illustrated in this paper. While the general folding methodology was developed for aircraft interiors, it can be adapted …

Quantum Safety Metrics Framework For Commercial Unmanned Aircraft Operators, Tracy L. Lamb, Nathan A. Phillips, Trong Van Nguyen

International Journal of Aviation, Aeronautics, and Aerospace

Commercial unmanned aircraft systems continue to increase in applications and diversity; however, mishaps and accidents erode safety, investment return, and efficiency. Most unmanned aircraft accidents are preceded by leading indicators; the ability to forecast and quantify these may provide increased safety and profitability. This mixed-method research study used a non-experimental parallel convergence approach with multiple instruments, multiple-case study n = 22, and one exemplar case design to develop a quantum safety metric program. This study used a combination of previously validated methods as development instruments, including; the HFACS, STAMP, 'Sierra Scale,' and Accident Prevention Effort equations. The study extended the …

Support To Design For Air Traffic Management: An Approach With Agent-Based Modelling And Evolutionary Search, Gabriella Gigante, Roberto Palumbo, Domenico Pascarella, Alessandro Pellegrini, Gabriella Duca, Miquel Angel Piera, Juan José Ramos

International Journal of Aviation, Aeronautics, and Aerospace

This paper presents a methodology to manage the support to design in ATM operations. We propose a workflow for the design of ATM solutions in a performance-based setting. The methodology includes the evaluation of the impact on human behaviour and exploits a combination of different paradigms, such as Agent-Based Modelling and Simulation, and Agent-Based Evolutionary Search. We prove the soundness of the methodology by carrying out a real case study, which is the transition from Direct Routing to Free Routing in the Italian airspace. The validation results exhibit limited errors for the assessment of the performance metrics under evaluation. Furthermore, …

Predictability Improvement Of Scheduled Flights Departure Time Variation Using Supervised Machine Learning, Deepudev Sahadevan, Palanisamy Ponnusamy Dr, Manjunath K. Nelli Mr, Varun P. Gopi Dr

International Journal of Aviation, Aeronautics, and Aerospace

The departure time uncertainty exacerbates the inaccuracy of arrival time estimation and demand for arrival slots, particularly for movements to capacity constrained airports. The Estimated Take-Off Time (ETOT) or Estimated Departure Time(ETD) for each individual flight is currently derived from Air Traffic Flow Management System (ATFMS), which are solely determined based on individual flight plan Estimated Off Block Time(EOBT) or subsequent delays updated by Airline. Even if normal weather conditions prevail, aircraft departure times will differ from ETOTs determined by the ATFMS due to a number of factors such as congestion, early/delayed inbound flight (linked flights), reactionary delays and air …

Numerical Analysis Of Aerospike Engine Nozzle Performance At Various Truncation Lengths, Sam Dakka Dr, Oliver Dennison

International Journal of Aviation, Aeronautics, and Aerospace

The aerospike engine was first devised in the early 1960s where it provided new means of reaching orbit in a single stage. The paper aimes to demonstrate the viability of the technology by showcasing the increased nozzle thrust efficiency over the conventional bell nozzle. Various truncations were applied to the nozzle and each was subjected to two conditions, an over-expansion and near optimum condition. The nozzle contour was developed using the simple approximation method and was chosen to replicate that of the XRS-2200. This anchored the data, thereby validating the computational fluid dynamics (CFD) simulation. Simulations were completed for at …

Performance Of The Egnos System In Algeria For Single And Dual Frequency, Lahouaria Tabti, Salem Kahlouche, Belkacem Benadda

International Journal of Aviation, Aeronautics, and Aerospace

EGNOS (European Geostationary Navigation Overlay Service) transmits data for more accurate real time positioning with an integrity message for GNSS navigation satellites, which are in view by RIMS station (Ranging and Integrity Monitoring Stations) extended over a continent.

The purpose of this paper is to analyses the performances of EGNOS V2 single frequency L1 and EGNOS V3 dual frequency L1/L5 without RIMS station in Algeria. During this work, four procedures of flight (APV I, LPV 200, APV II and CAT I) were analyses to determine the optimal performances of the EGNOS system in terms of availability and continuity.

We have …

Measuring Safety Culture: Qualitative And Quantitative Means Of Measuring Safety Culture For Safety Management System Optimization, David R. Zubowski

International Journal of Aviation, Aeronautics, and Aerospace

The Department of Transportation Office of the Inspector General (2020) investigated the Federal Aviation Administration oversight of Southwest Airlines Safety Management System and noted concerns and gaps in the oversight, specifically with the lack of guidance provided to inspectors in evaluating organizational safety culture. Using the published report as a case study, this work researched different peer-reviewed articles using qualitative and quantitative means to investigate the benefits, limitations, and assumptions of measuring an organizational safety culture. While different methods were used, academia seems to have settled on definitions for safety culture and safety climate with the majority of researchers using …

Aircraft Exhaust Gas Temperature Value Mining With Rough Set Method, Mustagime Tülin Yıldırım Asst. Prof., Mehtap Taşcı

International Journal of Aviation, Aeronautics, and Aerospace

Aircrafts are one of the most important means of transportation today. For aircrafts to be able to serve safely, their maintenance must be done in a timely and complete manner. In addition to regular maintenance, it may appear suddenly; there is also irregular maintenance performed in cases such as lightning strikes, bird strikes, and hard landings. Engine failures and maintenance has great importance in aircraft maintenance. Using the data recorded during the flight by flight data recorder, the engine health condition is monitored and the necessary maintenance procedures are carried out. In this study, the exhaust gas temperature was estimated …

Notes On Rules Of Thumb For Pilots, Yuzo Inokuchi

International Journal of Aviation, Aeronautics, and Aerospace

The rules of thumb can be found in several flight instructions or pilot's handbooks. Thus far, available rules have been presented without proof or a valid range, such as altitude or velocity ranges wherein these rules can be applied. This paper presents the background theory for a few selected rules; then, the rule is compared with a first-order approximation of the background theory. A valid range is presented by analyzing the prediction accuracy of the rule, which is defined as the relative error of the rule to the background theory. These rules of thumb provide a good approximation of the …

Comparative Study On Performance Accuracy Of Three Probe And Five Probe Flow Analysers For Wind Tunnel Testing, Akhila Rupesh Ms, J V Muruga Lal Jeyan Dr

International Journal of Aviation, Aeronautics, and Aerospace

In the field of inviscid fluid flow studies, the theoretical concept has to be developed even more. In order to make it possible, it is very important to supplement the concepts with strong experimental results. While performing experimentation, various accepts of design can be determined with factors influencing the and also required modification can be recommended in a more systematic and economic manner. Also, the aim objective of the experiment is to extend the underlying theory and to produce new designs with improvements that can be great support to the advancement in technology. In experimental analysis, wind tunnels are used …

Methodology For Convergence Of The Training Program With The Professional Activities Of Aviation Specialists, Zair Ziyaevich Shamsiev

International Journal of Aviation, Aeronautics, and Aerospace

The method of developing curricula for training aviation specialists for civil aviation of the Republic of Uzbekistan is analyzed. It is substantiated that it does not sufficiently take into account the labor market requirements for the composition and content of academic disciplines. An overview of foreign experience in bridging the gap between educational programs and the workplace is given. A method based on a statistical analysis of civil aviation regulations is recommended.

Aerodynamic Characterization Of Bio-Mimicked Pleated Dragonfly Aerofoil, Md Akhtar Khan, Chinmaya Padhy

International Journal of Aviation, Aeronautics, and Aerospace

The work inspired by the dragonfly wing corrugation positioned at the front wing's radius section lying at 40% of the total wingspan of forewing from the root section. During gliding flight, dragonfly wings presumed to be an ultra-light aerofoil due to its well-defined cross-sectional corrugation. The aerodynamic simulation carried out to understand the aerodynamic performance of a bio-mimetic dragonfly corrugated airfoil at low Reynolds number range of 75000-150000 to explore the potential advantages of pleated airfoils at a varying angle of attack from 0° to 12°. CFD analysis accomplished by using ANSYS Fluent to understand the aerodynamic performance of the …

Internet Of Things 36-Rotor Multicopter For Ionizing Radiation Surveying, Svetoslav Zabunov, Garo Mardirossian, Rositsa Miteva, Todor Kunchev

International Journal of Aviation, Aeronautics, and Aerospace

This paper presents an Internet of things 36-rotor unmanned aerial vehicle suitable for radiological surveying of buildings and facilities. The design of the 36-rotor multicopter platform is disclosed. The aircraft is used as a testbed for a lightweight gamma/beta/neutron ionizing radiation sensor closely coupled with the autopilot of the multirotor aircraft. A prototype of the drone and sensor was developed and initial tests were conducted. Test results are presented with data from measuring different radiation sources. The proposed novel design is compared to existing work and advantages to the latter were established.

Design Of A Laboratory Annular Combustor, Sathish Dharmalingam, Kartik Dolarkumar Kothari

International Journal of Aviation, Aeronautics, and Aerospace

Combustion lies at the heart of gas turbine technology. The combustor is the power source that aids the acceleration of flight. It provides the core functionality of adding heat through the controlled burn of the air-fuel mixture, converted into mechanical energy with the help of turbines. This extracted power has been used to produce thrust in the case of aircraft or to produce electrical energy in the case of industrial gas turbines. Designing an annular combustor involves a rigorous iterative process, and there is no systematic procedure available to design a small-scale laboratory combustor, used for research and academic purposes. …

A Model For Inhalation Of Infectious Aerosol Contaminants In An Aircraft Passenger Cabin, Bert A. Silich

International Journal of Aviation, Aeronautics, and Aerospace

Aerosol contamination of an aircraft cabin by infectious passengers is a concern of passengers, aircrew and the aviation industry. This may be especially important during a pandemic, such as COVID-19, where the full extent of aerosol transmission is not well understood. A statistical method to determine the number of infectious passengers on board along with a mathematical model estimating the contaminant concentration of aerosols in the cabin and the number of inhaled infectious particles by passengers is presented. An example is used to demonstrated how the results can be estimated during normal operations and emergency conditions with malfunctions of the …

Aerodynamic Performance Analysis Of Co-Flow Jet Airfoil, C M Vigneswaran, Vishnu Kumar G C

International Journal of Aviation, Aeronautics, and Aerospace

The work in this paper aims to increase the maximum lift coefficient of the airfoil by implementing the co-flow jet concept on NACA 0018 airfoil and also to investigate the performance of co-flow jet (CFJ) airfoil. To conduct numerical solution, RANS equations have been solved for 2D incompressible and unsteady flow using the Spalart-Allmaras turbulence model. The suction surface of the airfoil is modified by placing the injection slot near the leading edge and the suction slot near the trailing edge. A small mass of air is withdrawn into the airfoil suction slot, pressurized by a pumping system located inside …

Leveraging Aircraft Transponder Signals For Measuring Aircraft Fleet Mix At Non-Towered Airports, Chuyang Yang, John Mott, Darcy M. Bullock

International Journal of Aviation, Aeronautics, and Aerospace

The general aviation sector has contributed significantly to the overall growth of the aviation industry. Fleet mix and operations information is important for the analysis of both the safety and the environmental and economic impact of general aviation activity. Factual data on the impact of environment and safety is particularly important, given the scarcity of airport improvement funds and the strong stakeholder engagement that often occurs when airport investments are evaluated. The research presented herein evaluates Mode S short and extended squitter data collected from three general aviation airports over a one-month period. This article demonstrates that by utilizing the …

Co2 Reduction Measures In The Aviation Industry: Current Measures And Outlook, Florian Mathys, P. Wild, J. Wang

International Journal of Aviation, Aeronautics, and Aerospace

This article gives a holistic overview of the current CO₂ reduction measures and analyses the effectiveness of measures that are feasible for implementation in the future. To achieve the objectives of the Paris Agreement, the aviation industry needs to implement reduction measures because of its forecasted growth and contribution to global warming. The focus is set on CO₂ reduction measures, categorized in technology, operations, infrastructure/air traffic management (ATM), and market-based measures. The most promising long-term technologies to reduce CO₂ emissions are hydrogen-powered aircrafts and sustainable aviation fuels (SAF). In terms of operations, CO₂ emissions can be …

Small Unmanned Aircraft Systems Acoustic Analysis For Noninvasive Marine Mammal Response: An Exploratory Field Study, David Thirtyacre, Gennifer Brookshire, Sarah Callan, Brittany Arvizu, Patrick Sherman

International Journal of Aviation, Aeronautics, and Aerospace

As in countless other fields of human endeavor, small unmanned aircraft systems (sUAS) have the potential to benefit pinniped (Pinnipedia; e.g., Phocidae [seals], Otariidae [sea lions], and Odobenidae [walruses]) response efforts. The employment of sUAS could give responders a close-up look at animals in distress in order to determine their condition as well as develop a response strategy. However, unlike other subjects that are regularly inspected by sUAS (e.g., croplands and civil infrastructure) pinnipeds may respond to the distinctive sound generated by small, multirotor sUAS. This reaction may include retreating into the water en masse, which could put …

Albatross And Falcon Inspired Bionic Uav: An Aerodynamic Analysis, Bilji C. Mathew, Sagar K. Sahu, Prantik Dutta, Rushi Savale, Muruga Lal Jeyan Jv Dr.

International Journal of Aviation, Aeronautics, and Aerospace

The drone industry yearns for enhanced aerodynamic performance. In order to achieve this feat, researchers and engineers are trying to mimic the natural flyers due to their aerodynamic optimality. One such flyer, the Albatross is an inspiration for many marine drones due to its planform and aerodynamic efficiency. The wing of the plan form is designed and simulated to study its properties. The Bell-Shaped Lift Distribution is incorporated for higher efficiency and elimination of the total downwash produced in case of an Elliptical Lift Distribution. A blended wing body inspired by the Falcon is used for smoother airflow interactions. Furthermore, …

Helicopter Shaft Heating Parameters For Polyamide-11 Coating, Selim Kevran Ph.D, Uğur Ati̇ci̇

International Journal of Aviation, Aeronautics, and Aerospace

In this study, the heating parameters required for polyamide-11 (P11) coating of the helicopter shaft were investigated. The torsion value created by the force applied to the middle of the helicopter's shaft is measured. Heating before coating affects the torsion value of the shaft. A new heating mechanism has been designed to cover the shaft surface without changing the torsion value of the shaft. Thus, the coating surface is left inside the furnace and the torsion measurement area outside of the furnace. Taguchi method was used to determine heating parameters such as furnace type, initial temperature and heating time. The …

Digitalization Of Educational And Methodological Support For The Training Of Aviation Dispatchers, Zair Ziyaevich Shamsiev

International Journal of Aviation, Aeronautics, and Aerospace

The tasks of improving the educational process of training civil aviation dispatchers on the basis of the development and implementation of digital teaching aids are considered. Legislative and regulatory documents are accepted as an object of digitalization. The end result of the research is expressed in the provision of the educational process with a special electronic educational complex, which has the functions of providing the necessary information and conducting practical exercises to deepen, consolidate and control knowledge in the field of aviation documents.