Engineering Commons^™

The Impacts Of Advanced Avionics On Degraded Visual Environments, Sultan Naseeb Harib Fairouz Mubarak, Anju Anna Jacob Dr

International Journal of Aviation, Aeronautics, and Aerospace

Degraded visual environments (DVE) such as brownout, sand storms, and night conditions are responsible for accidents and hence losses in the aviation industry. There is a need to develop avionic systems to support pilots when they encounter environmental conditions that compromise their visual capacity. This report discusses the effects of DVEs on aviation, expounds on the advanced avionic systems available and further elaborates how these systems are implemented in countering DVE conditions. The report recommends on how advanced avionics systems have been and are being implemented in aircrafts to support decisions made by pilots flying under degraded visual environments.

Accuracy Assessment Of The Ebee Using Rtk And Ppk Corrections Methods As A Function Of Distance To A Gnss Base Station, Joseph Cerreta, David Thirtyacre, Peter Miller, Scott S. Burgess, William J. Austin

International Journal of Aviation, Aeronautics, and Aerospace

The use of unmanned aircraft systems to collect data for photogrammetry models has grown significantly in recent years. The accuracy of a photogrammetric model can depend on image georeferencing. The distance from a reference base station can affect the accuracy of the results. Positioning corrections data relies on precise timing measurements of satellite signals. The signals travel through the Earth's atmosphere, which introduces errors due to ionospheric and tropospheric delays. The aim of this research was to examine the eBee X and its global GNSS accuracy by comparing the RTK and PPK methods at different base station distances in photogrammetry …

Space Cargo: Ultra-Fast Delivery On Earth –Potential Of Using Suborbital Space Vehicles For The Transportation Of Cargo, Robert O. Walton, Robert A. Goehlich

International Journal of Aviation, Aeronautics, and Aerospace

No abstract provided.

Conceptual Design Of Fuel Dumping System In Aircraft, Naveen M. Kumar Mr., Ravi A. Kannan Be., Magesh L Be., Praveen T. Kumar Be., Vijay K. Babu Me., Prashanth Radhakrishnan Be.

International Journal of Aviation, Aeronautics, and Aerospace

Airlines release the unburned jet fuel into the atmosphere to reduce the weight of aircraft before landing. Sometimes, aircraft reach a weight more than takeoff weight while departing from the airport. Therefore, the pilot follows the ATC comment to dump fuel into the atmosphere to reduce the aircraft's weight to avoid accidents. Due to fuel dumping, an airline faces fuel consumption, loss, and several diseases affect environmental pollutants, and living things. The total fuel consumption of commercial airlines worldwide in 2021 is 57 billion gallons. If jet fuel routinely hit the ground, it would pollute water and land and damage …

Uas For Public Safety: Active Threat Recognition, Joseph Cerreta, Tray Denney, Scott S. Burgess, Anthony Galante, David Thirtyacre, Gloria A. Wilson, Patrick Sherman

International Journal of Aviation, Aeronautics, and Aerospace

The Center for Homeland Defense and Security identified an increase of active threat events, such as mass shootings, annually since 1999. Literature suggests that 90% of shootings were over before law enforcement arrived at the scene and the first responder response was limited to “surround and contain” until Special Weapons and Tactics Teams (SWAT) arrived on the scene. Using Unmanned Aircraft Systems (UAS) to detect which individual was the threat and type of weapon used can provide useful information to increase the speed of the response for first-on-scene rather than waiting for SWAT if the type of weapon was known. …

Comparative Study On The Prediction Of Aerodynamic Characteristics Of Mini - Unmanned Aerial Vehicle With Turbulence Models, Somashekar V, Immanuel Selwyn Raj A

International Journal of Aviation, Aeronautics, and Aerospace

When dealing with CFD simulations the turbulent nature is seen on most of the engineering flows and these flows need to be solved. Reliable and applicable CFD outputs can be obtained from the accurate modelling of the turbulence as it is one of the most vital elements of CFD modelling. The RANS equations are extensively employed to analyse the complex flows over aircraft and for this purpose, a turbulence model is needed for turbulent flow analyses. Compatible turbulence must be chosen for the exact predictions of aircraft aerodynamic characteristics. In this report, numerical analyses of Mini-UAV are done to compare …

Aircraft Exhaust Gas Temperature Value Mining With Rough Set Method, Mustagime Tülin Yıldırım Asst. Prof., Mehtap Taşcı

International Journal of Aviation, Aeronautics, and Aerospace

Aircrafts are one of the most important means of transportation today. For aircrafts to be able to serve safely, their maintenance must be done in a timely and complete manner. In addition to regular maintenance, it may appear suddenly; there is also irregular maintenance performed in cases such as lightning strikes, bird strikes, and hard landings. Engine failures and maintenance has great importance in aircraft maintenance. Using the data recorded during the flight by flight data recorder, the engine health condition is monitored and the necessary maintenance procedures are carried out. In this study, the exhaust gas temperature was estimated …

Internet Of Things 36-Rotor Multicopter For Ionizing Radiation Surveying, Svetoslav Zabunov, Garo Mardirossian, Rositsa Miteva, Todor Kunchev

International Journal of Aviation, Aeronautics, and Aerospace

This paper presents an Internet of things 36-rotor unmanned aerial vehicle suitable for radiological surveying of buildings and facilities. The design of the 36-rotor multicopter platform is disclosed. The aircraft is used as a testbed for a lightweight gamma/beta/neutron ionizing radiation sensor closely coupled with the autopilot of the multirotor aircraft. A prototype of the drone and sensor was developed and initial tests were conducted. Test results are presented with data from measuring different radiation sources. The proposed novel design is compared to existing work and advantages to the latter were established.

Small Unmanned Aircraft Systems Acoustic Analysis For Noninvasive Marine Mammal Response: An Exploratory Field Study, David Thirtyacre, Gennifer Brookshire, Sarah Callan, Brittany Arvizu, Patrick Sherman

International Journal of Aviation, Aeronautics, and Aerospace

As in countless other fields of human endeavor, small unmanned aircraft systems (sUAS) have the potential to benefit pinniped (Pinnipedia; e.g., Phocidae [seals], Otariidae [sea lions], and Odobenidae [walruses]) response efforts. The employment of sUAS could give responders a close-up look at animals in distress in order to determine their condition as well as develop a response strategy. However, unlike other subjects that are regularly inspected by sUAS (e.g., croplands and civil infrastructure) pinnipeds may respond to the distinctive sound generated by small, multirotor sUAS. This reaction may include retreating into the water en masse, which could put …

Albatross And Falcon Inspired Bionic Uav: An Aerodynamic Analysis, Bilji C. Mathew, Sagar K. Sahu, Prantik Dutta, Rushi Savale, Muruga Lal Jeyan Jv Dr.

International Journal of Aviation, Aeronautics, and Aerospace

The drone industry yearns for enhanced aerodynamic performance. In order to achieve this feat, researchers and engineers are trying to mimic the natural flyers due to their aerodynamic optimality. One such flyer, the Albatross is an inspiration for many marine drones due to its planform and aerodynamic efficiency. The wing of the plan form is designed and simulated to study its properties. The Bell-Shaped Lift Distribution is incorporated for higher efficiency and elimination of the total downwash produced in case of an Elliptical Lift Distribution. A blended wing body inspired by the Falcon is used for smoother airflow interactions. Furthermore, …

Digitalization Of Educational And Methodological Support For The Training Of Aviation Dispatchers, Zair Ziyaevich Shamsiev

International Journal of Aviation, Aeronautics, and Aerospace

The tasks of improving the educational process of training civil aviation dispatchers on the basis of the development and implementation of digital teaching aids are considered. Legislative and regulatory documents are accepted as an object of digitalization. The end result of the research is expressed in the provision of the educational process with a special electronic educational complex, which has the functions of providing the necessary information and conducting practical exercises to deepen, consolidate and control knowledge in the field of aviation documents.

A Review Of Dji’S Mavic Pro Precision Landing Accuracy, Cody Yoakum, Joseph Cerreta

International Journal of Aviation, Aeronautics, and Aerospace

Precision landing has the potential to increase the accuracy of autonomous landings. Unique applications require specific landing performance; for example, wireless charging loses efficiency with a misalignment of 100mm. Unfortunately, there is no publicly available information for the DJI Mavic Pro’s landing specifications. This research investigated the ability of a Mavic Pro to land at a specified point accurately. The purpose of this research is to determine if precision landings are more accurate than non-precision autonomous landings and if the Mavic Pro is capable of applications such as wireless charging when using precision landings. A total of 128 (64 precision …

Mini Unmanned Aerial Systems (Uav) - A Review Of The Parameters For Classification Of A Mini Uav., Ramesh Ps, Muruga Lal Jeyan

International Journal of Aviation, Aeronautics, and Aerospace

In the recent years, Mini Unmanned Aerial Vehicle (UAV) has generated a lot of interest both in military and civilian applications. Contemporary innovations have seen the entry of Mini UAV into a wide range of hitherto fore unexplored domains. Advancement in computer systems, miniaturisation of electronics, artificial intelligence and composite materials is propelling the development of Mini UAV. Mini UAV is a class of UAV within the large family of unmanned systems categorised by a set of parameters. However, there are glaring inconsistencies and lack of uniformity in specifying the parameters which define a Mini UAV. The paper explores the …

Effect Of Chemical Reactions On The Fluidic Thrust Vectoring Of An Axisymmetric Nozzle, Rachid Chouicha, Mohamed Sellam, Said Bergheul

International Journal of Aviation, Aeronautics, and Aerospace

Abstract:

During the last years, several thrust control systems of aerospace rocket engines have been developed. The fluidic thrust vectoring is one of them; it is simple in design and offers a substantial gain in weight and in performance. Most of studies related to this device were carried out with cold gas. It’s quite legitimate to expect that the thermophysical properties of the gases may affect considerably the flow behavior. Besides, the effects of reacting gases at high temperatures, under their effects all flow parameters like to vary.

This study aims to develop a new methodology that allows studying and …

Aerodynamic Design And Exploration Of A Blended Wing Body Aircraft At Subsonic Speed, Sam Dakka Dr, Oliver Johnson

International Journal of Aviation, Aeronautics, and Aerospace

Blended Wing Body (BWB) is a novel aircraft concept which provides many different aerodynamic benefits over conventional aircrafts design. This research investigated the BWB design, L/D characteristics, surface pressure distribution and span-wise lift distribution of a BWB aircraft at low to medium subsonic speeds. A BWB model was designed, manufactured and tested in a subsonic wind tunnel to validate the CFD simulation. The results gained from the investigation proved that BWB has a L/D improvement of 9.4% than conventional aircrafts and 21% increase at medium subsonic speeds (Mach 0.6) compared to lower subsonic speeds of 25 m/sec. It was found …

Fe Modeling Methodology For Load Analysis And Preliminary Sizing Of Aircraft Wing Structure, Jun Hwan Jang, Sang Ho Ahn

International Journal of Aviation, Aeronautics, and Aerospace

It is a critical part at the basic design phase of aircraft structural design to build a finite element model and it will have a direct impact on time and cost for airframe structure development. In addition, the objective of finite element model will be varied depending on each design review phase and the modelling methodology varied accordingly. In order to build an effective and economic finite element model, it is required to develop adequate level of modelling methodology based on each design phase and its objectives. Therefore, in this paper, the finite element modeling methodology was presented for internal …

Comparison Of Fixed-Wing Unmanned Aircraft Systems (Uas) For Agriculture Monitoring, Joseph Cerreta, Kristine M. Kiernan

International Journal of Aviation, Aeronautics, and Aerospace

Florida citrus growers need inexpensive methods to observe citrus plants to detect disease and stress consistently. Health vegetation indices, such as the Normalized Difference Vegetation Index (NDVI) collected from Unmanned Aircraft Systems (UAS), can be used to identify variation in plant health. Simple-to-operate UAS may enable growers to determine within-field variation more frequently than with inspections from scouts, providing more frequent knowledge about the crop condition. This research compared two low-cost fixed-wing UAS, a $5,000 Parrot Disco Pro Ag and a $16,690 senseFly eBee, each equipped with a Parrot Sequoia multispectral camera, to determine if there were differences in the …

Design Guidelines For Supersonic Aircrafts In Civil Aviation, Tridib Banerjee Mr.

International Journal of Aviation, Aeronautics, and Aerospace

There exists no publication currently available to the scholars that address in detail, every aspect of designing a modern supersonic aircraft for civil aviation. This paper aims to resolve that issue. It reviews all the existing work that has been done on the topic so far and builds upon that. It incorporates multiple disciplines and takes into account the closely inter-coupled effects of each component on one-another. It also analyses in detail the various environmental and modern regulatory challenges like sonic boom and means to overcome them. It further addresses the challenges like logistics, cabin crew radiation exposure, and cost …

Optimization And Analysis Of An Elite Electric Propulsion System, Mehakveer Singh, Kapil Yadav, Satnam Singh, Vikas Chumber, Harikrishna Chavhan

International Journal of Aviation, Aeronautics, and Aerospace

Abstract- Electric propulsion has a promising system to create new possibilities in this technological era as well as control the harmful gaseous emission. This paper put a vision on several parameters of electric propulsion. The engine’s performance is comparable to the current propulsion devices and provides a lightweight solution to the robust technologies’ dependent on chemical energy sources. There are a plethora of factors which is enhanced by electric propulsion such as, overall efficiency, capabilities, and robustness of future air vehicles as well as mainly overcome from exhaust hazards. Electric propulsion systems have the potential of utilizing the electrically-driven propulsion …

In-Flight Wingtip Folding: Inspiration From The Xb-70 Valkyrie, Gaétan X. Dussart, Mudassir Lone, Ciaran O'Rourke, Thomas Wilson

International Journal of Aviation, Aeronautics, and Aerospace

Wingip folding can be used to extend aircraft wingspan, allowing designers to take advantage of reduced induced drag whilst respecting ground operational limitations. Such devices can also be used in-flight for a variety of other benefits including load alleviation and flight control. The majority of in-flight folding research takes inspiration in past developments made on the XB-70 Valkyrie, which used the folding devices for stability and lift performance benefits. In this paper, the authors investigate the capabilities of the folding wingtip system and potential scaling to large civil aircraft. Manufacturing details are used to size the actuators whilst the aerodynamic …

Design And Realization Of An Unmanned Aerial Rotorcraft Vehicle Using Pressurized Inflatable Structure, Nirmal Sadasivan

International Journal of Aviation, Aeronautics, and Aerospace

Unmanned aerial rotorcraft vehicles have many military, commercial and civil applications. There is a necessity to advance the performance on several ranges of rotorcraft for using these vehicles successfully in the expanded future roles. A lower flight time, noise disturbance and safety issues remain the key obstacles in increasing the efficiency of the rotorcraft for various applications. This work presents the design and realization of a rotorcraft using pressurized inflatable structure filled with lighter than air gas such as helium or hydrogen to provide lift assistance for the vehicle. Two iterative design procedures were developed for designing the vehicle. One …

A Thrust Equation Treats Propellers And Rotors As Aerodynamic Cycles And Calculates Their Thrust Without Resorting To The Blade Element Method, Phillip -. Burgers

International Journal of Aviation, Aeronautics, and Aerospace

The lift generated by a translating wing of known translational speed, lift coefficient and area is calculated by a simple equation. A propeller or rotor generating thrust share the same aerodynamic principles but their different kinematics cause the calculation of their thrust to be laborious. This paper derives a thrust equation from an algebraic expansion of the Prandtl’s dynamic pressure term q_∞by adding the rotational kinetic energy of a propeller or rotor to the existing translational kinetic energy term. This thrust equation can be applied directly to propellers and rotors and assumes these to operate as cycles with …

A Comparison Of The Strengths And Weaknesses Of Small-Format Aerial Photography Platforms, Jeremy W. Aber, Tyler A. Babb, Douglas E. Campbell, Kevin M. Corns

International Journal of Aviation, Aeronautics, and Aerospace

The demand for small-format aerial photography continues to grow in large part due to the rapid adoption of unmanned aerial vehicles (UAVs). Prior to the explosion of UAV use, this kind of photography was collected using older technologies such as tethered kites and blimps. Due to the increased demand for aerial imagery, this article looks at four platforms commonly used to collect small-format aerial imagery: multi-rotor UAVs, fixed-wing UAVs, kites, and blimps. Practical use considerations are explored, including characteristics of flight and operation, atmospheric and site factors, imaging sensors and costs, and regulatory limitations.

Each of the four categories of …

Book Review: Fundamentals Of International Aviation, Alan Bender

International Journal of Aviation, Aeronautics, and Aerospace

Not applicable.

Experimental Investigation Of A New Spiral Wingtip, Naseeb Ahmed Siddiqui, Mohamed Aldeeb, Waqar Asrar, Erwin Sulaeman

International Journal of Aviation, Aeronautics, and Aerospace

Experiments on the relative merits and demerits of slotted wingtips mimicking a bird’s primary feathers have been performed. The real emargination length of feather tips, their flexibility and curved shapes during cruise are considered in the present study. The experiments were performed at a Reynolds number of 3.7 x 10⁵ on a symmetric flat plate half wing of aspect ratio 3. Lift, drag and pitching moments were measured using a six component aerodynamic balance. Four different shapes inspired by bird primary feathers have been analysed. The rigid curved tip performed the best increasing the L/D ratio by 20%. This …

The Challenges Of Processing Kite Aerial Photography Imagery With Modern Photogrammetry Techniques, Jeremy W. Aber, Tyler A. Babb

International Journal of Aviation, Aeronautics, and Aerospace

Kite Aerial Photography (KAP) is a traditional method of collecting small-format aerial photography used for work in a variety of fields. This research explored techniques for processing KAP imagery with a focus on some of the challenges specific to photo processing. The performance of multiple automated image compositing programs was compared using a common set of 29 images. Those packages that were based on a photogrammetry approach outperformed the non-photogrammetric software, and generated similar levels of quality to one another. While all three photogrammetric packages produced satisfactory output, each had unique challenges.

A Novel Approach For Missing Combat Support Aircraft Search Acceleration Using Vtol Uas, Mohammed Ba Zuhair, Wisam Yousef, Issam Samara, Vladislav Varsegov

International Journal of Aviation, Aeronautics, and Aerospace

In this paper, an approach to accelerate search operations for a missing combat support aircraft using a portable waterproof autonomous vertical takeoff and landing unmanned aerial system called “flying locator beacon” is described. The latter is connected with both flight data and cockpit voice recorders with a parallel bus and may be deployed from the empennage during extreme emergency scenarios, which is detected when few flight parameters are overrun leading to an air crash stimulating behavior. Landing of the flying locator beacon strictly takes place on global latitude and longitude coordinates only of integer values enabling significant minimization of search …

Innovative Dodecacopter Design – Bulgarian Knight, Svetoslav Zabunov, Garo Mardirossian

International Journal of Aviation, Aeronautics, and Aerospace

The current article aims at introducing a novel dodecacopter multirotor design called Bulgarian Knight. The aircraft implements a number of innovations and characteristics that give it an advantage over other contemporary multi-copters. Some of its novel characteristics are the mounting of the rotors under the fuselage by use of pusher propellers. Further, the design implements twelve rotors positioned in an optimal geometric coverage.

Design And Optimization Of Aircraft Configuration For Minimum Drag, Zin Win Thu, Aung Myo Thu, Phyo Wai Thaw

International Journal of Aviation, Aeronautics, and Aerospace

This paper presents a reliable and robust optimization for minimum drag of an aircraft at the conceptual design phase. Firstly, the conceptual design code was developed and existing Single Seat Aerobatic (SSA) aircraft was chosen to validate the reliability of developed code. The resulted data from the developed code showed good agreement with the existing data. Secondly, Sequential Quadratic Programming (SQP) optimizer was created and employed as a tool to explore possible aircraft configurations that are more efficient and less costly than an existing design. The optimized results gave lower Drag and better performance.

Literature Review: Biomimetic And Conventional Aircraft Wing Tips, Naseeb Ahmed Siddiqui, Waqar Asrar, Erwin Sulaeman

International Journal of Aviation, Aeronautics, and Aerospace

This paper is an attempt to summarize the effect of wing tip devices employed by birds, as well as aeronautical engineers in the past to improve the performance characteristics of aircraft. The focus is on reduction of the induced drag or drag due to lift also known as inviscid drag. This paper will provide an insight on both biomimetic and conventional wing tip approaches to reduce the induced drag. Prior analysis and experiments on the aerodynamics of airplane performance due to both these separate studies have been discussed. The needs of the industry and their past inventions have been described …