Engineering Commons^™

Inject And Sustain Sustainability (Is2) In Automatic Fare Collection Projects, Hillary Kin Hung Lau, Nicholas Chun Kit Wong

Practical Social and Industrial Research Symposium

No abstract provided.

Agenda For Third Meeting Of The Forum For Promotion Of Soil Dynamics In India, Shamsher Prakash

Forum for Promotion of Soil Dynamics in India

No abstract provided.

Membership Of Forum For Promotion Of Soil Dynamics In India, Shamsher Prakash

Forum for Promotion of Soil Dynamics in India

No abstract provided.

Minutes Of The Third Meeting Of The Forum For Promotion Of Soil Dynamics In India, Shamsher Prakash

Forum for Promotion of Soil Dynamics in India

No abstract provided.

Syllabus For Course On Soil Dynamics In Ug Curriculum, Deepankar Choudhury

Forum for Promotion of Soil Dynamics in India

No abstract provided.

Sub-Orbital Spaceflight – An Addition To Our Multi-Modal Transportation System, Scott Haeffelin

Space Traffic Management Conference

The number of commercial spaceflights will be increasing by orders of magnitude over the next several decades. The current volume of space traffic can be managed on a case-by-case basis and there is little impact to the National Airspace System (NAS). This will change as more spaceports become operational, commercial sub-orbital flight companies begin serving their customers and as the cost of these flights begin to decrease. Current regulatory paths seek to allow the flexibility in the regulations for this industry to flourish while also maintaining a high standard of safety. There are, however, many nearsighted and old fashioned assumptions …

Improving The Integration Of Launch And Reentry Operations Into The National Airspace System, Gwendolyn Mazzotta, Daniel P. Murray

Space Traffic Management Conference

With increasing commercial space activities occurring in the National Airspace System, the FAA has identified a need for more efficient management of the NAS with respect to commercial space operations. Current methods for integration of aviation and space activities employ a segregation approach, in which hazard areas are constructed around launch and reentry operations and sections of airspace are closed to other users. Mission objectives and vehicle characteristics dictate the extent of the closure in terms of location, duration, and volume of airspace affected. Launches, reentries, and other operations have an effect on other NAS stakeholders, causing delays, changes to …

Space Data Integrator (Sdi) And Space Program Integrated Data And Estimated Risk (Spider): Proof-Of-Concept Software Solution For Integrating Launch And Reentry Vehicles Into The National Airspace System (Nas), Devin D. Dickens

Space Traffic Management Conference

The Space Data Integrator (SDI) Project is the initial step to satisfy the Federal Aviation Administration (FAA) strategic initiative to integrate commercial space launch and reentry vehicles into the National Airspace System. The project addresses the needs for greater situational awareness and monitoring, and increased response capability during non-nominal and catastrophic incidents during space operations.

The initial phase of this project leverages current FAA systems, and provide an initial demonstration of capability that will provide for state data from a commercial reentry vehicle to be ingested into a the FAA Traffic Flow Management System, and displayed on Traffic Situation Displays. …

Evaluating Launch Vehicle / Reentry Vehicle (Lv/Rv) Separation Concepts, Zheng Tao, Ganghuai Wang, Tudor Masek, Thomas J. St. Clair

Space Traffic Management Conference

Launch Vehicle/Reentry Vehicle (LV/RV) operations are expected to increase across the National Airspace System (NAS) as their reliability and availability improve. LV/RV designs and the industry landscape have vastly changed since the 1960’s, and the Federal Aviation Administration’s (FAA) methods for handling these operations need to evolve to support the expected growth. Currently, large amounts of airspace are segregated for every LV/RV operation. This increases costs for NAS users and may limit LV/RV opportunities. The FAA’s NextGen office recently proposed two more efficient separation concepts for LV/RV operations called Space Transition Corridors, and Four-Dimensional Trajectory Deconfliction. Prior safety research for …

Safe Operations Above Fl600, Lt. Col. Stephen Hunter

Space Traffic Management Conference

Safe Operations Above FL600

Abstract

With the increase in likelihood of near-term development of revenue-generating point-to-point suborbital flights and the increase in high-altitude-long-endurance commercial operations above FL600, the criticality of addressing operations above class A airspace has never been more pressing. While the Federal Aviation Administration describes the National Airspace System, it doesn’t offer a description that includes a top. Technological, physiological, physical and administrative limitations have relegated most air operations to FL600 and below. As that changes, previous work on Space Traffic Management (STM) concepts begin to take on new life and add to sincere considerations for adaptation or …

Implementation Of E-Education In Africa Via Space Networks, Dimov Stojce Ilcev

UBT International Conference

In this paper is introduced an advanced E-education provision in remote dispersed communities, such as rural, remote, mobile, agriculture, mining, construction, surveying, military, tourism and so on, based on the specific needs and requirements, implies significant broadband connectivity requirements, timely and quality-assured content delivery of service, applications and interactivity. The E-education solutions of distance learning and training for remote and rural areas, which are out of range of terrestrial and short distance wireless telecommunications facilities, cannot provide the broadband access without space-enabled communication infrastructures, such as satellite constellations and Stratospheric Platform Systems (SPS) or High Altitude Platforms (HAP). The paper …

Case Studies For A Markov Chain Approach To Analyze Agent-Based Models, Florian Kitzler, Martin Bicher

UBT International Conference

Agent-Based Models have become a widely used tool in social sciences, health care management and other disciplines to describe complex systems from a bottom-up perspective. Some reasons for that are the easy understanding of Agent-Based Models, the high flexibility and the possibility to describe heterogeneous structures. Nevertheless problems occur when it comes to analyzing Agent-Based Models. This paper shows how to describe Agent-Based Models in a macroscopic way as Markov Chains, using the random map representation. The focus is on the implementation of this method for chosen examples of a Random Walk and Opinion Dynamic Models. It is also shown …

E-Learning Systems In Higher Education Institutions: An Outlook Of Their Use In The Western Balkan Region, Blerta Abazi Chaushi, Agron Chaushi, Florije Ismaili

UBT International Conference

This study provides a review of the literature on e-learning systems evolution and environments. The argument is that e-learning systems should be embedded in the core strategy of the institution. To support this premise, studies for e-learning are analyzed and six recommendations are drawn for universities to follow in order to have successful e-learning environments. The main contribution of this study, however, is the identification of the trends and statistics regarding the e-learning usage in the Balkan region. These stats are identified through a survey conducted in 40 universities in 10 countries from this region. The results show that more …

“New” Subjects In Mechatronics Management Education, Peter Kopacek

UBT International Conference

Process – and manufacturing automation as well as robotics are currently one of the fast growing fields in automation. Advanced process control, cyber-physical systems, industry 4.0 and “advanced robots” are no longer a headline. They are in realization. As a consequence of these developments new social, ethical and human questions appear. Therefore this contribution is a first report about the continuous “modernization” of the Mechatronics Management BSc and MSc programs which are successful running at UBT. Both programs were developed in the framework of two TEMPUS projects from an international consortium from 2006 to 2009. Since that time new “buzzwords” …

Effect Of Steel Fiber And Polypropylene Fiber On Reinforced Concrete, Erjola Reufi, Jozefita Marku

UBT International Conference

This paper presents the results of an experimental study that investigated, the effects of steel fibers and polypropylene fibers on the mechanical properties of concrete. Two types of fibers used are hooked end steel fibers of 50 mm and 30 mm length with the aspect ratio of 67 (length 50 mm and diameter 0.75 mm) and 44 (length 30 mm and diameter 0.75 mm). On the other hand, three types of polypropylene fibers are used of length 12mm, 6mm and 3 mm. Steel fibers are used of 0%, 0.25%, 0.5%, and 1% by the volume of concrete and polypropylene fiber …

Database For Online Accreditation Process In Directorate For Accreditation Of Kosovo (Dak-Mis), Ibush Luzha

UBT International Conference

Directorate for Accreditation of Kosovo (DAK) is only National Accreditation Body in Republic of Kosovo, recognized by Government, which in accordance with international standards, assesses technical competences of the Conformity Assessment Bodies (CAB)s that deal with activities such as: testing, calibration, certification and inspection both in public and private sector. Till now application for accreditation and all other procedures for accreditation of CABs are carried out so that all the documents of the application and the receipt of the certificate of accreditation are conducted in the offices of DAK. By Management Information System (MIS), database of DAK (DAK-MIS), customers will …

Optimal Control Of Dc Motors Using Pso Algorithm For Tuning Pid Controller, Arnisa Myrtellari, Petrika Marango, Margarita Gjonaj

UBT International Conference

The DC motors are widely used in the mechanisms that require control of speed. Different speed can be obtained by changing the field voltage and the armature voltage. The classic PID controllers are widely used in industrial process for speed control. But they aren’t suitable for high performance cases, because of the low robustness of PID controller. So many researchers have been studying various new control techniques in order to improve the system performance and tuning PID controllers. This paper presents particle swarm optimization (PSO) method for determining the optimal PID controller parameters to find the optimal parameters of DC …

Impact Of Shunt Compensation In Improving Voltage Level Of Overhead Transmission Lines, Marjola Puka, Nako Hobdari, Leonard Gjini, Marjela Qemali

UBT International Conference

Shunt compensation is widely used in alternative current transmission and distribution networks to produce reactive power support. Located in critical points such as vicinity of load centers, the use of Shunt compensation has beneficial effect on power system performance. The focus of this paper is a case-study in Albanian Power System: the implementation of Shunt Compensation in transmission network. For the most critical part of the network, there are performed simulations in two situations: without reactive compensation and with shunt compensations. The simulations data results to be in compliance with measurements data of the voltage for overhead transmission lines at …

A Study On Tibiofemoral Joint Contact Area Stresses Using Finite Element Method, Anjeza Gjini, Altin Bidaj, Enio Deneko, Drilona Disha

UBT International Conference

The joints of the human body act as mechanical or building structures joints. Joints connect different segments by enabling the movement of these segments. The design of a joint that provides durability or static support differs from that one which provides only movement. Joints of the human body, as organic joints, are considered more complex than other types of joints. Finite element models help to comprehend the knee structure behavior under the action of dynamic and static loads. Deformations in the articulating cartilage and the distribution of loads from meniscus provide data to understand the effect of loads in different …

Application Of Ec Regulations On Assessment Of The Effect Of Fire On Buildings, Xhemshir Mulliqi

UBT International Conference

The last decade has been characterized by construction of multi-storey buildings in almost all cities of Kosovo, with the storey-height ranging from B+G+4 to B+G+11 and even B+G+15, which means that they need to be subjected to the revision of the main project, including things be verified for the effect of fire. This paper aims to illustrate the use of EC regulations for the verification of reinforced concrete structures under effect of fire, respectively: EN 1991-2-2 Basis of design and actions on structures. Part-2.2: Actions on structures exposed to fire and EN 1992-1-2:2004 Design of concrete structures- part -1-2: Structural …

Application Of En 1991-1-2 Annex E, Using’S Software Package, Xhemshir Mulliqi

UBT International Conference

The fire may occur anywhere and in any phase in the lifetime of a building .Fire resistance requirements should be based on the parameters influencing fire growth and development. For calculating the characteristic fire load, the characteristic fire load has to be determined using the table of EN 1991-1-2 Annex E.The aim of this paper is to present the methodology used in this tool and to show an example of application. The fire resistance of a steel beam submitted to compartment fires which supports a non-collaborating concrete slab in a compartment is estimated in case of an unprotected and a …

Assessment Of Wood Processing Engineers By Requirements Of Leading Manufacturing Entities In Albania, Ramadan Topuzi, Arden Bejtja

UBT International Conference

In Albania a significant number of wood-processing engineers exercise this profession in the field of manufacturing and trading of furniture. In this sector exercise their activity over 800 manufacturing entities distributed across the country with about 9,000 employees. The main purpose of the study is the assessment of wood processing engineers as perceived by the manufacturing entities and their adaptation to the requirements of the labor market . The data collected through a structured questionnaire for this purpose, are thrown into a database (where they are analyzed to generate the results given in this paper. The selection of the respondents …

Structural Analysis Of A Typical Highway Bridge Comparison Between Ktp, En And Aashto Load Models, Endrit Berisha

UBT International Conference

This study consists on a structural analysis comparison of a typical highway bridge between KTP, EN and AASHTO based on load capacity. The Eurocodes are currently in the process of national implementation towards becoming the Europe wide means for structural design of civil engineering works. A team from Mott Macdonald inspected 562 bridges and the main causes of the defects are figured out in the study as traffic load, nature force, and aging, lack of maintenance and design deficiencies. As design codes are advancing with time, the need of Albania to upgrade its code has become a must. This paper …

Design Of Bearing Capacity Of The Driven Piles Of A Highway Bridge Foundation According To 3 Different Methods, Papa Dhimitri, Dervishi Idlir

UBT International Conference

Contemporary design methods of bearing capacity of deep foundation (pile foundation) change according to different design codes. The main requisition of the designing process of the deep foundation is related with the axial bearing capacity, which should be sufficient to withstand the applied loads. Many authors has developed and published detailed methods to analyze the behavior of a single reinforced concrete pile or a group of piles, based on vertical bearing capacity due to lateral friction or residence at the pile point. The goal of this paper is to illustrate the calculation methods according to 3 analytical methods of vertical …

Advanced Construction Materials For Highway Applications, Altin Bidaj, Irakli Premti, Hektor Cullufi

UBT International Conference

Nowadays cost of highway materials increase every year. In addition, use of marginal materials results in early development of pavement distress, requiring more frequent repairs also rehabilitation, associated lane closures, traffic congestion in high volume traffic areas which increases the potential for construction zone accidents and increased levels of environmental pollution related to automobile emissions. Therefore, there is a strong desire in our country to optimize the use of materials currently used for highway pavement construction and to seek advanced materials that are cheaper and environmentally friendly. It has now been recognized that the age of limitless construction materials and …

Motorizing Cbd Of Tirana. A Before And After Study In Tirana From Sustainability Point Of View, Edison Barhani

UBT International Conference

The Center Business District of Tirana (Skanderbeg Square) plays a crucial part in Tirana Transportation System. After a closure of about 2 years, being under reconstruction, CBD opened to traffic on November 14th, 2011. This study analyses performance parameters like: travel time for both cars and buses, waiting time at bus stations, and passenger boarding/alignment for bus passing through or around the CBD before and after it was opened to traffic. Route that follows Kinostudio-Kombinat bus line has been selected as a representative of all other lines passing through the center of Tirana. Opened to traffic for the supply to …

From Traditional Markets To E-Commerce And Finally To Social Media Commerce, Ardian Hyseni

UBT International Conference

These days, getting new customers is much easier than in the past. People and customers are online sharing and exchanging ideas on products and it has become easier to find products over the internet and lately; with social media, where people can look for information from reviews and comments on sites. This way has changed shopping to a social experience and is the key element to the growth of social commerce. Businesses want to connect with people and customers which they do business, also they want customers opinions and reviews. By using social media, companies can now easily create an …

New Integral Transform In Caputo Type Fractional Difference Operator, Artion Kashuri, Akli Fundo, Rozana Liko

UBT International Conference

In this paper, we introduce Caputo type nabla (q,h)-fractional difference operators and investigate their basic properties and also to show the applicability of this interesting (q,h)- new integral transform method and its efficiency in solving linear fractional difference equations. Differential equations with fractional derivative provide a natural framework for the discussion of various kinds of real problems modeled by the aid of fractional derivative. Discrete analogues of some topics of continuous fractional calculus have been developed. Finally, we provide the general solutions in terms of discrete Mittag-Leffler functions.

The Mobile Telecom Operator T-Mobile Macedonia Ad Skopje Abuses Its Dominant Position Harmful For The Mobile Telecom Operators One And Vip In The Telecom Market, Boris Arsov

UBT International Conference

T-Mobile’s abusing of its dominant position is referring to the postpaid tariff models Relax and Relax Surf regarding the residential customers and the postpaid tariff models Business and Business Surf regarding its business customers. The prominent price offer to consumers is a case of predatory prices squeeze identified as a way of preventing or restricting competition in theory and practice. T-Mobile provides services at unreasonably low prices, prices below the level of expenditures necessary for their provision, as it is specific case with the postpaid tariff models Relax and Relax Surf regarding the residential customers and the postpaid tariff plans …

Assessing Clustering In A Social University Network Course, Orgeta Gjermëni

UBT International Conference

A collection of data is gathered from surveys held in a Spring Course of the Economic Faculty in the University “Ismail Qemali” of Vlora, Albania. The data set for each student contains the names of the other students through which he/she have a “social relationship”. This relationship includes frequent communications, discussions on exercise solutions, and sitting usually close to each other in the class. We have constructed. At the end of the course, a final network based on this type of relationship. We are particularly interested on the clustering coefficient of this network and assessing it’s “significance”, in the sense …