Engineering Commons^™

Menaxhimi I Planit Dinamik Per Objektin B+P+5, Sami Vataj

Theses and Dissertations

Menaxhimi i planit dinamik të projektit nënkupton procesin e udhëheqjes dhe planifikimit te aktiviteteve ndërtimore qe nevojiten për ta përfunduar një projekt ndërtimor.

Disiplina e ndërtimtarisë është profesion specifik sa i përket anës ekonomike dhe menaxheriale. Ndërtimtaria ka për synim ngritjen dhe rikonstruktimin e objekteve ndërtimore. Si veprimtari, ajo realizon produktin e caktuar, objektin ndërtimor-arkitektonik. Ndërtimtaria veqohet për shkak të aktiviteteve të shumta që nevojiten për arritjen e një rezultati brenda një afati kohor. Secili aktivitet si proces teknologjik ka kohëzgjatjen e tij.

Varësisht nga natyra e projektit kemi aktivitete që kryhen në vartësi nga aktivitetet tjera paraprake dhe aktivitete …

Analizimi I Efiqiences Së Transformatorëve Në Sistemin Elektroenergjetik Të Kosovës, Flamur Zeka

Theses and Dissertations

Analizimi i efiqiencës së transformatorëve në sistemin elektroenergjetik të kosovës, na bënë të kuptojmë se me analizimin e rrjetit dhe me analizën e transoframtorëve në kosovë gjendja e efiqiencës nuk është mjaftë e mire, problemi qëndron të amortizimi i trafove, vjetërsia e tyre, kapaciteti i vogel ndaj kërkesave të konsumatorëve dhe mundësia e zavendësimit me trafo të reja. Instalimi i transformatorëve me kapacaitet dhe efiqienc më të madhe, ndër të tjera kryesore është edhe ta analizojmë koston e cila duhet për ta bërë zavendësimin e një tranformatori të vjeter me të ri i cili i plotësonë standardet Europiane.

Në temën …

A Mechanism Behind The Mechanotransduction Of Surface Characteristics In Osteoblasts, Otto J. Juhl Iv

Theses and Dissertations

Biomaterials for use in bone regeneration and healing range from metal and metal alloy implants to hydrogel-based solutions. These materials can be optimized to increase bone healing and integration by improving the mechanical and biological properties. Regardless of the material itself, the cell-substrate interaction is key to the success of the biomaterial once implanted. Substrate surface characteristics such as roughness, wettability, and particle density are well-known contributors to a substrate’s overall osteogenic potential, and therefore the substrate's overall success. Unfortunately, it is still unknown how these substrate surface characteristics are transduced into intracellular signals by cells, preventing specific tailoring of …

Imaging Potential In Saturation Recovery Methods For Sarcoidosis Patients With Medical Devices, Samantha Zhao

Theses and Dissertations

Cardiovascular magnetic resonance (CMR) imaging is a preferred imaging methodology due to its lack of ionizing radiation and ability to detect myocardial inflammation and fibrosis using quantitative T1 mapping techniques. Cardiac sarcoidosis (CS) is characterized as the formation of granulomas in the myocardium. Current methods for detection include measuring non-cardiac specific C-reactive protein (CRP) levels, or PET imaging, which uses ionizing radiation, therefore CMR would make an ideal imaging option. However, many CS patients have implanted cardiac devices which can cause degradation in image. The modified Look-Locker inversion recovery (MOLLI) method is widely used in quantitative T1 mapping with high …

Evaluating Neuromuscular Function Of The Biceps Brachii After Spinal Cord Injury: Assessment Of Voluntary Activation And Motor Evoked Potential Input-Output Curves Using Transcranial Magnetic Stimulation, Thibault Roumengous

Theses and Dissertations

Activation of upper limb muscles is important for independent living after cervical spinal cord injury (SCI) that results in tetraplegia. An emerging, non-invasive approach to address post-SCI muscle weakness is modulation of the nervous system. A long-term goal is to develop neuromodulation techniques to reinnervate (i.e. resupply nerve to) muscle fiber and thereby increase muscle function in individuals with tetraplegia. Towards this goal, developing monitoring techniques to quantify neuromuscular function is needed to better direct neurorehabilitation. Assessment of voluntary activation (VA) is a promising approach because the location of the stimulus can be applied cortically using transcranial magnetic stimulation (TMS) …

Improving Patient-Specific Assessments Of Regional Aortic Mechanics Via Quantitative Magnetic Resonance Imaging With Early Applications In Patients At Elevated Risk For Thoracic Aortopathy, Patrick A. Jones

Theses and Dissertations

Unstable aortic aneurysms and dissections are serious cardiovascular conditions associated with high mortality. The current gold standards for assessment of stability, however, rely on simple geometric measurements, like cross-sectional area or increased diameter between follow-up scans, and fail to incorporate information about underlying aortic mechanics. Displacement encoding with stimulated echoes (DENSE) magnetic resonance imaging (MRI) has been used previously to determine heterogeneous circumferential strain patterns in the aortas of healthy volunteers. Here, I introduce technical improvements to DENSE aortic analysis and early pilot application in patients at higher risk for the development of aortopathies. Modifications to the DENSE aortic postprocessing …

Impact Dynamics Of Surfactant-Laden Droplets On Non-Wettable Coatings, Amir Esmaeili

Theses and Dissertations

Owing to their excellent water repellency, non-wettable (superhydrophobic) coatings have gained tremendous attention in the past couple of decades. Alkyl ketene dimer (AKD), an inexpensive polymer frequently used in paper industry as a sizing agent, has shown potentials to become superhydrophobic. The formation of a porous structure after curing the solidified AKD for an extra-long time (4–6 days) results in superhydrophobicity, i.e., a static contact angle with water of >150° and a roll-off angle of <10°. In this work, a facile and low-cost method was used to turn the surface of AKD superhydrophobic in a very short period of time by briefly treating the coatings, obtained from isothermally heated molten AKD at 40 °C for 3 min, with ethanol. The resulting superhydrophobicity is due to the formation of porous, entangled irregular micro/nano textures that create air cushions on the surface leading to droplet state transition from Wenzel to Cassie. As a proof of concept, the same material was applied to the co-sputtered nickel-tungsten thin films, commonly used in micro/nano-electro-mechanical systems, to improve their hydrophobicity. According to the results, at least 20% increase was observed in the dynamic contact angles of the treated substrates.

In addition, this work presents a detailed high-speed imaging analysis of the influence of the molecular weight, concentration and ionic nature of surfactants on droplet …

Rheological Analysis Of The Mechanical Properties Of Murine Lungs Over The Lifespan, Olajumoke Olufunke Harrison

Theses and Dissertations

To study the effects of aging in murine lungs, we characterized C57Bl6j mice from neonatal to 24-month-old mice. Samples were divided into two groups: Young Mice (YM) and Middle Age/Old Age Mice (MOM). The YM group included the neonatal and 6-10week. The MOM group included 7- and 22–24-month-old mice. Rheological testing was performed using a TA Instruments DHR-2 Rheometer to collect the mechanics of each mice sample. Utilizing a 20-mm parallel plate fixture, a gap of 0.8-1.0-mm, and a temperature setting of 25C, we conducted a frequency sweep. Samples were the decellularized over a four-day process then lyophilized for mass …

Nebulizer-Based Systems To Improve Pharmaceutical Aerosol Delivery To The Lungs, Benjamin M. Spence

Theses and Dissertations

Combining vibrating mesh nebulizers with additional new technologies leads to substantial improvements in pharmaceutical aerosol delivery to the lungs across therapeutic administration methods. In this dissertation, streamlined components, aerosol administration synchronization, and/or Excipient Enhanced Growth (EEG) technologies were utilized to develop and test several novel devices and aerosol delivery systems. The first focus of this work was to improve the poor delivery efficiency, e.g., 3.6% of nominal dose (Dugernier et al. 2017), of aerosolized medication administration to adult human subjects concurrent with high flow nasal cannula (HFNC) therapy, a form of continuous-flow non-invasive ventilation (NIV). The developed Low-Volume Mixer-Heater (LVMH) …

Exploring A Platinum Nanocatalytic Microcombustion-Thermoelectric Coupled Device, Dylan Moore Mcnally

Theses and Dissertations

This work aimed to create a first-generation power device for eventual application to portable electronics. A platinum nanoparticle catalytic substrate was employed in a microcombustion-thermoelectric coupled (MTC) device for the purpose of chemical-to-electrical energy conversion. Multiple microcombustion reactors were designed, fabricated, and investigated. Most importantly, the reactor configuration was designed to accommodate thermoelectric generators (TEGs) for power production. Temperature studies with catalytic combustion of methanol-air fuel mixtures were used to evaluate the thermal power generation performance of each reactor. The final reactor design enabled ignition at room temperature with the ability to achieve repeat catalytic cycles upon subsequent exposure to …

Efficient End-To-End Autonomous Driving, Hesham Eraqi

Theses and Dissertations

Steering a car through traffic is a complex task that is difficult to cast into algorithms. Therefore, researchers turn to train artificial neural networks from front-facing camera data stream along with the associated steering angles. Nevertheless, most existing solutions consider only the visual camera frames as input, thus ignoring the temporal relationship between frames. In this work, we propose a Convolution Long Short-Term Memory Recurrent Neural Network (C-LSTM), which is end-to-end trainable, to learn both visual and dynamic temporal dependencies of driving. Additionally, We introduce posing the steering angle regression problem as classification while imposing a spatial relationship between the …

Experimental And Modeling Of Biomass Char Gasification, Ruochen Wu

Theses and Dissertations

This investigation provides a comprehensive experimental dataset and kinetic model for biomass gasification, over a wide temperature range (1150-1350 °Ï¹) in CO2, H2O and the combination of these two reactant gases over the mole fraction ranges of 0 to 0.5 for H2O and 0 to 0.9 for CO2. The data come from a unique experimental facility that tracks continuous mass loss rates for poplar wood, corn stover and switchgrass over the size range of 6-12.5 mm. In addition, the data include char size, shape, surface and internal temperature and discrete measurements of porosity, total surface area, pore size distribution and …

Root Cause Analysis And Classification Of Single Point Failures In Designs Applying Triple Modular Redundancy In Sram Fpgas, James D. Swift

Theses and Dissertations

Radiation effects encountered in space or aviation environments can affect the configuration bits in Field Programmable Gate Arrays (FPGA) causing errors in FPGA output. One method of increasing FPGA reliability in radiation environments includes adding redundant logic to mask errors and allow time for repair. Despite the redundancy added with triple modular redundancy (TMR) and configuration scrubbing there exist some configuration bits that individually affect multiple TMR domains causing errors in FPGA output. A new tool called DeBit is introduced that identifies hardware resources associated with a single bit failure. This tool identifies a novel failure mode involving global routing …

Blast-Induced Liquefaction And Downdrag Development On A Micropile Foundation, Cameron Mark Lusvardi

Theses and Dissertations

Frequently, deep foundations extend through potentially liquefiable soils. When liquefaction occurs in cohesionless soils surrounding a deep foundation, the skin-friction in the liquefied layer is compromised. After cyclical forces suspend and pore pressures dissipate, effective stress rebuilds and the liquefied soil consolidates. When the settlement of the soil exceeds the downward movement of the foundation, downdrag develops. To investigate the loss and redevelopment of skin-friction, strain was measured on an instrumented micropile during a blast-induced liquefaction test in Mirabello, Italy. The soil profile where the micropile was installed consisted of clay to a depth of 6m underlain by a medium …

Instructional Case Studies In The Field Of Windfarm Optimization, N. Francesco Baker

Theses and Dissertations

Wind farm layout optimization is a multidisciplinary undertaking, requiring students and researchers to integrate many skillsets in order to optimize turbine placement. There is currently a lack of useful benchmarking exercises for participants in the field to compare the efficacy of their methods. This work details the construction and completion of a set of four case studies meant to satisfy this need, with the hope of providing some insight into useful layout optimization approaches. These case studies are intended to also serve as instructive introductory exercises with which newcomers researching wind energy may incrementally practice and increase their abilities.The first …

The Impact Of Calendering On The Electronic Conductivity Heterogenity Of Lithium-Ion Electrode Films, Emilee Elizabeth Hunter

Theses and Dissertations

Advancements in Li-ion batteries are needed especially for the development of electric vehicles and stationary energy storage. Prior research has shown mesoscale variations in electrode electronic conductive properties, which can cause capacity loss and uneven electrochemical behavior of Li-ion batteries. A micro-four-line probe (μ4LP) was used to measure electronic conductivity and contact resistance over mm-length scales in that prior work. This work describes improvements to overcome the challenge of unreliable surface contact between theμ4LP and the sample. Ultimately a second generation flexible probe called the micro-radial-surface probe (μ4LP) was designed and produced. The test fixture was also optimized to obtain …

Signal Transport And Rf Over Fiber Design For Alpaca, Erich Johannes Nygaard

Theses and Dissertations

The design of the RF over fiber signal transport system for the ALPACA receiver is described, with particular attention to the strict noise requirements as well as dynamic range considerations. Also discussed are analytical tools for analyzing dynamic range in the context of RFI-rich radio astronomy observational settings, including formulas for maximum interference to noise ratios and a simulation framework for predicting distortion levels. Phase and gain stability measurements of the signal transport system are presented, including the effects of the multi-strand armored fiber optic cable. The resulting system meets design requirements, with equivalent noise temperature below 900 K in …

Frameworks For Part Generation In Multiple Cad Systems And For Cad Simulation With Multiple Users, Jonathan Edwin Sadler

Theses and Dissertations

Companies often require designers to work with and operate between different computer-aided design (CAD) systems. To interoperate between these systems, a neutral design standard for CAD models is needed that allows for generation, customization, and parameterization. Current standards often fail to incorporate file history and design intent. The research proposes a simplified, neutral design format that can be used to generate models in different CAD systems. The format proposes additional functionality not yet found in existing neutral formats or scripts. The system was tested by generating models in both NX and CATIA, then comparing the models for accuracy, flexibility, and …

Development Of A Management Guide For Concrete Bridge Decks In Utah, Tenli Waters Emery

Theses and Dissertations

The objectives of this research were to 1) investigate bridge deck condition assessment methods used in the field and laboratory, methods of managing bridge decks, and methods for estimating remaining bridge deck service life using computer models through a comprehensive literature review on these subjects; 2) collect and analyze field data from representative concrete bridge decks in Utah; and 3) develop a decision tree for concrete bridge deck management in Utah. As a result of the literature review performed for objective 1, a synthesis of existing information about condition assessment, bridge deck preservation and rehabilitation, bridge deck reconstruction, and estimating …

Effects Of Conformal Cooling Channels On Additively Manufactured Injection Molding Tooling, Tyler Blaine Whatcott

Theses and Dissertations

This study focuses on the cycle-averaged mold temperature of additively manufactured injection molding tooling and how it is affected by conformal cooling channels. This was done by producing a benchmark mold out of Digital ABS produced by Stratasys, an acrylic based photopolymer, which was then used to produce injection molded parts until tool failure. Another, more cost-effective material, High Temp Resin produced by Formlabs, another acrylic based photopolymer, was also tested but yielded very little success. Then the mold design was altered by adding conformal cooling channels and again tested by producing injection molded parts while tracking the mold temperature. …

Lateral Resistance Of 24-Inch Statically Loaded And 12.75-Inch Cyclically Loaded Pipe Piles Near A 20-Ft Mechanically Stabilized Earth (Mse) Wall, Addison Joseph Wilson

Theses and Dissertations

Installing load bearing piles within the reinforcement zone of mechanically stabilized earth (MSE) retaining walls is common practice in the construction industry. Bridge abutments are often constructed in this manner to adapt to increasing right-of-way constraints, and must be capable of supporting horizontal loads imposed by, traffic, earthquakes, and thermal expansion and contraction. Previous researchers have concluded that lateral pile resistance is reduced when pile are placed next to MSE walls but no design codes have been established to address this issue. Full –scale testing of statically applied lateral loads to four 24”x0.5” pipe piles, and cyclically applied lateral load …

Math Models And Heuristic Methods For Constructing Fair Political Districts, Roya Ghorashi

Theses and Dissertations

Political parties’ attempts to manipulate district boundaries in order to gain political advantages in the election system lead to huge inefficiency and unfair election results. Previously some studies have developed methods for forming political districts considering various factors such as population equality, compactness, and contiguity; but only a few recent studies have considered political fairness as an objective for redistricting political map.This study attempts to find a solution to draw political districts using political fairness as a factor in addition to integrity, population equality, contiguity, and compactness of the districts in order to prevent gerrymandering. In this research, we introduce …

Sustainability In Construction: Using Lean Management Principles To Reduce Waste, Matthew Waite

Theses and Dissertations

The construction industry is facing many challenges. There are growing consumer demands for sustainable building. The construction industry generates a significant portion of the waste going into landfills. The construction industry has failed to keep pace with productivity in the manufacturing industry. Through adoption of Lean management principles, the construction industry can become more sustainable while increasing productivity. The literature was evaluated for three concepts: Lean management principles interaction with sustainability, the current state of sustainability in the construction industry, and the current state of Lean management principles in the construction industry. Lean management philosophies interactions with sustainability has been …

A Parametric Evaluation Of Iot Applications To Freight Transportation Using Model-Based Systems Engineering, Paul George Crawford

Theses and Dissertations

Industrial Internet of Things or IIoT consists of computing and communication at the operational edge of a value chain. Applications span manufacturing, energy, and transportation, among others. In the transportation context, IIoT translates to connected vehicle architecture and ITS applications. Current trends in communication allow more applications and devices to contribute to functions traditionally allocated to transportation ITS infrastructure. This poses challenges to design engineers to prototype emerging technologies in the existing transportation context and reduce integration, validation, and time to market. Model-based systems engineering is crucial step for IIoT deployment since it allows for a feature-rich digital representation of …

Development Of A Deformation-Based Structural Health System With Contactless Sensors And Machine Learning For Health Characterization And Failure Prediction, Juan Camilo Avendano Arbelaez

Theses and Dissertations

This dissertation presents the design and development of a structural health monitoring (SHM) system specifically tailored for transportation infrastructure components, such as bridges. The proposed system collects data by using contactless sensors and performs health characterization and failure prediction. It is capable of simulating multiple load conditions on structures, identifying possible failure points, and detecting and predicting failure scenarios. Both hardware and software implementations of a model of a bridge were performed as a pilot project in order to validate the proposed system. Computer simulation in ANSYS and the application of gradient boosting neural networks were performed to produce a …

Intelligent Therapeutic Robot: Design, Development, And Control, Asif Al Zubayer Swapnil

Theses and Dissertations

This research contributes to developing an Intelligent Therapeutic Robot (iTbot) designed to provide therapy to patients with upper limb impairment due to stroke, injury, and other trauma. This robot aims to implement robotic rehabilitation based on principles of motor rehabilitation and Neuroplasticity. The iTbot, as developed in this research, can provide end-effector type rehabilitation exercises in various configurations, including motion in the vertical and horizontal plane. It can provide passive, active, and active-assisted rehabilitation therapies to patients with limited upper limb mobility.

The iTbot has been designed with simplicity in mind with a minimum viability approach. With a minimum amount …

A Mathematical Approach To Paint Production Process Optimization, Ching-Ya Chuang

Theses and Dissertations

As the global paint market steadily grows, finding the most effective processing model to increase production capacity will be the best way to enhance competitiveness. Therefore, this study proposes two production environments commonly used in the paint industry: build-to-order (BTO) and the variation of a configuration-to-order (CTO), called group production, to schedule paint production. Mixed-Integer Linear Program (MILP) was solved using genetic algorithms (GA) to analyze two production environments with various products, different set-up times, and different average demand for each product. The models determine the number of batches, the size and product of each batch, and the batch sequence …

The Integration Of Iterative Convergent Photogrammetric Models And Uav View And Path Planning Algorithms Into The Aerial Inspection Practices In Areas With Aerial Hazards, Michael James Freeman

Theses and Dissertations

Small unmanned aerial vehicles (sUAV) can produce valuable data for inspections, topography, mapping, and 3D modeling of structures. Used by multiple industries, sUAV can help inspect and study geographic and structural sites. Typically, the sUAV and camera specifications require optimal conditions with known geography and fly pre-determined flight paths. However, if the environment changes, new undetectable aerial hazards may intersect new flight paths. This makes it difficult to construct autonomous flight path missions that are safe in post-hazard areas where the flight paths are based on previously built models or previously known terrain details. The goal of this research is …

Assessing Observer Stations For Cislunar Space Domain Awareness, Michael S. Rosenof

Theses and Dissertations

With renewed worldwide interest in cislunar space, the need for reliable domain awareness in that extended region of space is clear. This investigation quantifies the suitability of several possible stations for observer satellites in cislunar space by calculating the specific irradiance each would observe as they track satellites in various realistic lunar free-return trajectories across a decade, using reflected sunlight. This investigation includes one class of free return trajectories for target satellites, eleven distinct observer stations, and three different metrics for comparing the effectiveness of each observer station or combination of observer stations for sensing targets using reflected sunlight. The …

Electro-Optic Satellite Constellation Design Using Multi-Objective Genetic Algorithm, Yasin Tamer

Theses and Dissertations

Satellite constellation design is a complex, highly constrained, and multidisciplinary problem. Unless optimization tools are used, tradeoffs must be conducted at the subsystem level resulting in feasible, but not necessarily optimal, system designs. As satellite technology advances, new methods to optimize the system objectives are developed. This study is based on the development of a representative regional remote sensing constellation design. This thesis analyses the design process of an electrooptic satellite constellation with regional coverage considerations using system-level optimization tools. A multi objective genetic algorithm method is used to optimize the constellation design by utilizing MATLAB and STK integration. Cost, …