Engineering Commons^™

The Advancement Of Experimental And Computation Tools For The Study Of Molten Salt Chemistry To Facilitate The Extraction Of Strategic Elements In Nuclear Applications, Michael Stoddard

Theses and Dissertations

Nuclear energy presents environmental benefits, yet the challenge of radioactive waste management persists. Advanced solutions, such as Molten Salt Reactors (MSRs), require a more profound understanding of molten salt chemistry. This research aims to develop tools, including a depletion simulator, molten salt electrochemical simulator, and a fluoride-based thermodynamic reference electrode for electrochemical purification. The computationally inexpensive depletion simulator allows for exploration into extraction and processing strategies for molten salt reactors. An illustrative case study on Mo-99 production from MSRs demonstrates the practical application of the theoretical framework, emphasizing the need for optimization in extraction effectiveness and separation difficulty. The electrochemical …

From Waste To Energy: The Electrochemical Reduction Of Co2 Using Recycled Nanostructured Catalysts, Ibrahim Badawy

Theses and Dissertations

The reduction of carbon dioxide (CO₂RR) using electrochemistry is a promising solution for the burgeoning global energy crisis. The overall vision of its implementation relies on renewable energy sources to power the reaction creating carbon neutral products and effectively closing the carbon cycle. Research in this field has come a long way since its inception in the mid-1900s. However, there remain significant hurdles and important considerations to overcome in order to reach full commercialization. Most electrocatalysts tested for CO₂RR have been designed solely for maximum performance while ignoring the environmental consequences if such a material were …

Highly Active And Stable Low-Pgm And Pgm-Free Catalysts For Anion Exchange Membrane Fuel Cells, Horie Adabi Firouzjaie

Theses and Dissertations

Anion exchange membrane fuel cells (AEMFCs) have recently seen significant growth in interest as their achievable current density, peak power density, and longevity have been dramatically improved. Though these advances in performance have been important for demonstrating the feasibility of the technology, nearly all AEMFCs reported in the literature have required a relatively high loading of platinum group metal (PGM)- based catalysts at both the anode and cathode electrodes. However, to take command of the low-temperature fuel cell market, AEMFCs cannot simply reach the same performance as incumbent proton exchange membrane fuel cells (PEMFCs), which have had decades of development …

Investigation Of Single, Binary, And Ternary Metal Oxides Of Iridium, Rhodium, And Palladium For Neural Interfacing Applications, Gregory Vincent Taylor

Theses and Dissertations

In this dissertation, thin film single, binary, and ternary metal oxides of iridium (Ir), ruthenium (Ru), rhodium (Rh), and palladium (Pd) were synthesized for use as electrode/microelectrode coatings for neural interfacing applications using DC reactive magnetron sputtering. Synthesis conditions which enhanced the electrochemical properties of films as measured by cyclic voltammetry and electrochemical impedance spectroscopy in a phosphate buffered saline solution of the single metal oxides were identified to be 30 mTorr working pressure, 20% oxygen partial pressure, and cathode power densities ≤ 4.9 W/cm². These parameters were then used to develop the binary and ternary metal oxide …

Novel Coating Methods On Centrifugally-Spun Polymer Fibers For Applications In Lithium-Ion Batteries, Jonathan G. Ayala

Theses and Dissertations

The work presented in this thesis focuses on the processing, characterization, and electrochemical results of centrifugally spun composite carbon fiber electrodes for application as anode material in lithium-ion batteries. The work is presented as a compilation of two major projects. First, the use of novel Co3O4 wet coatings to increase the capacity of carbon fibers produced from Polyacrylonitrile (PAN). In this work, PAN fibers are produced via the Forcespinning method, and were heat treated by oxidation in air at 200 °C for four hours, and subsequent carbonization at 600 °C for six hours. The electrochemical performance of the Co3O4/C composite-fiber …

Centrifugally-Spun Ceramic/Carbon Composite Fibers And Their Use As Anode Materials In Li-Ion Batteries, Gabriel Gonzalez

Theses and Dissertations

The work in this thesis focuses in the study of Centrifugally Spun Short Fiber Composites and their Implementation as Alternate Anode Material in Li-Ion Batteries. Due to their high theoretical capacity, abundance, and environmental friendliness, metal oxides have been widely studied as alternate anode materials for lithium ion batteries (LIBs). In this research work, the processing of SnO2 and SnO2/TiO2 ceramic short fibers as well as flexible and porous metal oxide carbon fibers (FPMOCFs) by centrifugal spinning followed by an optimized coating technique is reported. In addition, the electrochemical performance of the composites was also investigated and is provided.

Mitigating Corrosion And Enhancing Energy Density Of Zinc-Based Anodes In Primary And Secondary Aqueous Batteries, Ehsan Faegh

Theses and Dissertations

Today Lithium-ion (Li-ion) batteries are the most-emphasized battery technology among the many different battery systems in the market. However, due to their high cost (especially for electric vehicle applications), flammability and toxicity, the development of inexpensive and safer alternative battery chemistries has been the focus of a significant amount of recent research. Among various battery chemistries, Aluminum-based (Al-based) and Zinc-based (Zn-based) batteries have been touted as promising options to compete with Li-ion batteries. However, the practical realization of Al battery chemistries has been difficult over a long period of time (170 years) due to a number of fundamental and intrinsic …

Biomass-Derived Electrode Materials And Sustainable Processes For Supercapacitors, Katelyn M. Shell

Theses and Dissertations

Biomass is one of the most abundant natural resources and has been used as a source of energy for thousands of years. Biomass as a precursor for energy storage materials is still relatively novel and faces several obstacles before becoming commonly used in today’s electrical devices. Currently, energy storage devices, such as batteries, capacitors, and supercapacitors, utilize petroleum-derived graphitic carbons for anodes, generating a need for more sustainable materials. Biomass, as a carbon-rich source for electrode materials, presents a viable and economically feasible alternative due to the prevalent lignocellulosic compounds: lignin, cellulose, and hemicellulose. Preliminary studies on the solid residues …

Application Of Immobilized Palladium Monolithic Catalysts In Suzuki-Miyaura And Tsuji-Wacker Redox Reactions, Sajjad Ghobadi

Theses and Dissertations

Herein, a wholistic analysis of the viability of monolithic catalysts for redox reactions is presented. The interdisciplinary approach taken in this systematic study included preparation and investigation on Pd-on-carbon monoliths as catalysts in a flow and electrochemical settings.

The Suzuki-Miyaura reaction-focused study led to rational design, preparation, and successful application of Pd⁰-on-graphene oxide (GO) monolithic catalysts in flow conditions. In this study a combination of chemical reduction, freeze-casting, and vapor-phase reduction processes was applied to Pd-GO structures leading to the preparation of these monoliths. The Suzuki flow synthesis reactions revealed that the monolithic structure led to significantly improved …

Engineering Of Earth-Abundant Electrochemical Catalysts, Dylan D. Rodene

Theses and Dissertations

Alternative energy research into hydrogen production via water electrolysis addresses environmental and sustainability concerns associated with fossil fuel use. Renewable-powered electrolyzers are foreseen to produce hydrogen if energy and cost requirements are achieved. Electrocatalysts reduce the energy requirements of operating electrolyzers by lowering the reaction kinetics at the electrodes. Platinum group metals (PGMs) tend to be utilized as electrocatalysts but are not readily available and are expensive. Ni_1-xMo_x alloys, as low-cost and earth-abundant transition metal nanoparticles (NPs), are emerging as promising electrocatalyst candidates to replace expensive PGM catalysts in alkaline media. Pure-phase cubic and hexagonal Ni_{1-x …}

Electrochemical Separation Of Multivalent Species On A Liquid Bismuth Cathode In Licl-Kcl Eutectic For Used Nuclear Fuel Reprocessing, Michael Woods

Theses and Dissertations

The presence of group I/II fission products (Cs-137, Sr-90, and Ba-137) within molten salt nuclear processes degrades operational efficiencies by contributing to increased radiation levels in the case of material handling processes or to loss of criticality in the case of a reactor. While methods such as zone freezing and ion exchange have been proven for the separation of these fission products in LiCl-KCl salts, they require extra equipment and processing steps. Addition of a liquid metal electrode to molten salt media, such as the electrorefiner of a pyroprocessing scheme or the salt cleaning stage of a molten salt fast …

Corrosion Of Aluminum Current Collector In Cost Effective Rechargeable Lithium-Ion Batteries, Shengyi Li

Theses and Dissertations

Rechargeable lithium ion batteries (LIB) have been widely used as commercial energy storage systems for portable equipment, electronic devices and high power applications (e.g. electronic vehicles). One issue with the commercialized LIB is that expensive, highly toxic and flammable organic solvents are used in the electrolyte and the fabrication process of electrodes. The toxic organic based solvents increase the production cost and lead to significant safety concerns in the event of a battery overcharge or short circuit. The recent development of “green manufacturing” technology allows manufacturers to replace the organic solvents used in the cathode coating process by aqueous based …

Electrochemical Studies Of Cerium And Uranium In Licl-Kcl Eutectic For Fundamentals Of Pyroprocessing Technology, Dalsung Yoon

Theses and Dissertations

Understanding the characteristics of special nuclear materials in LiCl-KCl eutectic salt is extremely important in terms of effective system operation and material accountability for safeguarding pyroprocessing technology. By considering that uranium (U) is the most abundant and important element in the used nuclear fuel, measurements and analyses of U properties were performed in LiCl-KCl eutectic salt. Therefore, the electrochemical techniques such as cyclic voltammetry (CV), open circuit potential (OCP), Tafel, linear polarization (LP), and electrochemical impedance spectroscopy (EIS) were conducted under different experimental conditions to explore the electrochemical, thermodynamic, and kinetic properties of U in LiCl-KCl eutectic. The ultimate goal …

An Improved Dynamic Particle Packing Model For Prediction Of The Microstructure In Porous Electrodes, Chien-Wei Chao

Theses and Dissertations

The goal of this work is to develop a model to predict the microstructure of Li-ion batteries, specifically focusing on the cathode component of the batteries. This kind of model has the potential to assist researchers and battery manufacturers who are trying to optimize the capacity, cycle life, and safety of batteries. Two dynamic particle packing (DPP) microstructure models were developed in this work. The first is the DPP1 model, which simulates the final or dried electrode structure by moving spherical particles under periodic boundaries using Newton's laws of motion. The experience derived from developing DPP1 model was beneficial in …

Tin Nanoparticles Encapsulated In Hollow Tio2 Spheres As High Performance Anode Materials For Li-Ion Batteries, Xiang Pan

Theses and Dissertations

Tin, an anode material with a high capacity for lithium-ion batteries, has poor cyclic performance because of the high volume expansion upon lithiation. Based on a literature review of the applications of lithium-ion batteries and current research progress of the tin-based anode materials for lithium-ion batteries, we developed a method to synthesize hollow TiO2 spheres with tin nanoparticles anchored on the inner surface of the TiO2 shell. Such a unique tin/TiO2 composite alleviates the volume change of tin–based anode materials in charge-discharge processes. SnCl2·2H2O (Tin (II) chloride dihydrate) and titanium (IV) isopropoxide (TIPT) were used as the Sn source and …

Molecular Dynamics (Md) Study On The Electrochemical Properties Of Electrolytes In Lithium-Ion Battery (Lib) Applications, Negin Salami

Theses and Dissertations

While the high energy density and the power along with longer cycle life and less requirements of maintenance distinguish the rechargeable lithium-ion batteries (LIBs) from other energy storage devices, development of an electrolyte of LIBs with optimized properties still constitutes a challenge towards next-generation LIB systems with robust electrochemical performance. The electrolytes serve as the medium to provide ionic conduction path between the electrodes as their basic function. Conductivity of the solutions are mainly affected by their transport properties and the electrolyte electrode/separator interfacial phenomena. Although many contributions on thermodynamic properties of the electrolytes consist of alkyl carbonates mixed with …

Microstructure And Transport Properties Of Porous Li-Ion Electrodes, David E. Stephenson

Theses and Dissertations

The goal of this work is to understand the relationships between electrode microstructure and mass transport resistances. One can use this information to predict cell performance from fundamental principles. This work includes new types of particle-scale 3D models for correlating and predicting the effects of electrode microstructure on both ionic and electronic transport. The 3D models imitate the sub-micrometer-scale arrangement of active material particles, carbon, binder, and pores and use FIB/SEM images as a basis for parameterization. The 3D models are based respectively on the statistical mechanics techniques of molecular dynamics and Monte Carlo. The approach closely related to molecular …