Engineering Commons^™

Corrosion Studies Of Stainless Steel Blades, Dhruv S. Kothari

Theses

Corrosion is a subject of interest to interdisciplinary research communities that includes fields of materials science, chemistry, physics, metallurgy and chemical engineering. In order to understand the mechanisms of corrosion and the function of corrosion inhibitors, the reactions at the interfaces between the corrosive electrolyte and a steel surface, particularly at the initial stages of the corrosion process, need to be described. Naturally, these reactions are strongly affected by the nature and properties of the steel surfaces. It is however seen that the majority of recent corrosion and corrosion-inhibition investigations are limited to electrochemical testing, with ex situ analysis of …

Flexural Behavior Of Reinforced Concrete T-Beams Strengthened With Nsm Composite System Under Accelerated Corrosion., Anes Bouchair

Theses

This research work aims at evaluating the effects of corrosion on flexural response of simply supported reinforced concrete (RC) T-Beams strengthened with near-surface-mounted carbon fiber-reinforced polymer (NSM-CFRP) strips. The research comprised experimental testing and analytical modelling. Test parameters included concrete grade, amount of NSM-CFRP strips, presence of U-wraps along the beam span, and time of corrosion exposure. A total of eighteen reinforced concrete beams with a T-shaped cross section were tested. Fourteen beams were strengthened in flexure and four beams were not strengthened to act as benchmarks. The strengthening regime included installation of either two or four NSM-CFRP strips into …

Performance Of Reinforced Concrete Beams Strengthened With Mechanically-Fastened Composite System Under Corrosive Environment, Amna Zaid Suwaid Al Nassibi

Theses

This study examines the effects of corrosion exposure on the flexural response of reinforced concrete (RC) beams strengthened with a powder-actuated fastened (PAF) composite system. Twenty-one RC beams were constructed and tested to failure under four-point bending. The corroded beams were subjected to 30, 60, and 100 days of accelerated corrosion that corresponded to measure tensile steel mass losses of 6, 11 and 18% respectively. Other test parameters included width of fiber reinforced polymer (FRP) composite strip, fastener length, and number of fasteners rows.

For the non-corroded beams, the PAF-FRP system resulted in up to 24% increase in beam flexural …

Strengthening Of Reinforced Concrete Beams Pre-Damaged In Shear, Yousef Mohammed Bachar Chekfeh

Theses

Repair and strengthening of existing reinforced concrete (RC) structures has increased drastically in recent years. Shear reinforcement in RC beams is typically of a small bar diameter, and hence any shear-damage would result in a severe safety hazard and a catastrophic mode of failure especially under extreme loading events. The present work was initiated to the effectiveness of different composite strengthening systems; namely externally bonded carbon fiber reinforced polymer (EB-CFRP), and near surface mounted glass fiber reinforced polymer (NSM-GFRP) to prolong the functional service life of RC beams pre-damaged in shear. It comprised experimental testing and analytical investigation.

The experimental …