Engineering Commons^™

Vibration-Based Health Monitoring Of Rotating Systems With Gyroscopic Effect, Nenad Gavrilovic

Master's Theses

This thesis focuses on the simulation of the gyroscopic effect using the software MSC Adams. A simple shaft-disk system was created and parameter of the sys-tem were changed in order to study the influence of the gyroscopic effect. It was shown that an increasing bearing stiffness reduces the precession motion. Fur-thermore, it was shown that the gyroscopic effect vanishes if the disk of system is placed symmetrically on the shaft, which reduces the system to a Jeffcott-Ro-tor. The second objective of this study was to analyze different defects in a simple fixed axis gear set. In particular, a cracked shaft, …

Combination Of A Probabilistic-Based And A Rule-Based Approach For Genealogical Record Linkage, Pooja P. Shah

Master's Theses

Record linkage is the task of identifying records within one or multiple databases that refer to the same entity. Currently, there exist many different approaches for record linkage. Some approaches incorporate the use of heuristic rules, mathematical models, Markov models, or machine learning. This thesis focuses on the application of record linkage to genealogical records within family trees. Today, large collections of genealogical records are stored in databases, which may contain multiple records that refer to a single individual. Resolving duplicate genealogical records can extend our knowledge on who has lived and more complete information can be constructed by combining …

Nutrient Removal From Clarified Municipal Wastewater Using Microalgae Raceway Ponds, Justin Andrew Kraetsch

Master's Theses

Shallow, mixed raceway ponds can be used to grow microalgae for the dual purposes of wastewater treatment and biofuel feedstock production. To improve the environmental sustainability of microalgae biofuels and to alleviate resource limitations, nutrients remaining after biofuel production should be recycled for additional cultivation. This thesis considers three topics: wastewater treatment by algae, nitrogen and phosphorus assimilation by algae, and algae cell disruption to facilitate nutrient recovery.

The main experimental work was done in pilot raceway ponds growing polycultures of microalgae on clarified municipal wastewater. In addition, two lab-scale pretreatment technologies were tested for their ability to disrupt cells, …

Three-Phase Generation Using Reactive Networks, Tattiana Karina Coleman Davenport

Master's Theses

Household appliances utilize single-phase motors to perform everyday jobs whether it is to run a fan in an air conditioner or the compressor in a refrigerator. With the movement of the world going “green” and trying to make everything more efficient, it is a logical step to start with the items that we use every day. This can be done by replacing single-phase motors with three-phase motors in household appliances. Three-phase motors are 14% more efficient than single-phase motors when running at full load and typically cost less over a large range of sizes [1]. One major downside of incorporating …

Digitally Controlled Zero-Voltage-Switching Quasi-Resonant Buck Converter, Brian R. Luc

Master's Theses

ABSTRACT

Digitally-Controlled Two-Phase Zero-Voltage-Switching Quasi-Resonant Buck Converter

Brian Luc

This thesis entails the design, construction, and performance analysis of a digitally-controlled two-phase Zero-Voltage Switching Quasi-Resonant (ZVS-QR) buck converter. The converter is aimed to address the issues associated with powering CPUs operating at lower voltage and high current. To evaluate its performance, the Two-Phase ZVS-QR buck converter is compared against a traditional Two-Phase buck converter. The design procedure required to implement both converters through utilizing the characterization curve and formulas derived from their circuit configurations will be presented. Computer simulation of the Two-Phase ZVS-QR buck converter is provided to exhibit its …

Aerospike Rocket Motor Structural Webbing, Andrew Brock

Master's Theses

A labscale hybrid rocket motor test stand has been developed for research at Cal Poly. The primary focus of research using this rig has been the development of regenerative cooling techniques using nitrous oxide as coolant and oxidizer, as well as validation of technologies relating to the annular aerospike nozzle. In order to prevent undesirable deflection of the cantilevered spike, a structural stiffening web, referred to as “The Spider,” is proposed. The Spider resembles a three-spoked wheel, with the aerospike held by the inner hub and the chamber walls abutting the outer radius.

The Spider, placed upstream of the nozzle, …

Development Of Local Transient Heat Flux Measurements In An Axisymmetric Hybrid Rocket Nozzle, Christopher D'Elia

Master's Theses

A method of performing local transient heat flux measurements in an uncooled axisymmetric hybrid rocket nozzle is presented. Surface temperatures are collected at various axial locations during short duration tests and post processed using finite difference techniques to determine local transient heat fluxes and film coefficients. Comparisons are made between the collected data and the complete Bartz model. Although strong agreement is observed in certain sections of the nozzle, ideal steady state conditions are not observed to entirely validate the Bartz model for hybrid rocket nozzles. An experimental error analysis indicates the experimental heat fluxes are accurate within ±5.2% and …

A Low-Cost Loop Measurement Tool For Dc-Dc Converters, Shouee B. Lin

Master's Theses

Loop measurements are very important in evaluating dynamic performance of DC-DC converters. In this thesis, a small loop measurement tool as a low-cost alternative to a network analyzer is proposed. The tool is particularly useful when a network analyzer is not always available for use, for example when engineers are working on-site with customers or when a network analyzer is not affordable due to their relatively high cost. The design, simulation, and hardware implementation of the inexpensive loop measurement tool will be presented in this thesis. Results from computer simulation and hardware prototype demonstrate the ability of the proposed tool …