Engineering Commons^™

Eipeck: Assessing Educators’ Pedagogical Content Knowledge For Engineering Integration In K-12, Pilar Pazos, Francisco Cima Cohuo, Jennifer Kidd, Kristie Gutierrez, Krishnanand Kaipa, Orlando Ayala

Journal of Pre-College Engineering Education Research (J-PEER)

Global efforts are underway to include engineering in pre-college curricula. In the USA, this pursuit led to the inclusion of engineering content in the most recent version of the Next Generation Science Standards that guide K-12 science. As these standards become part of the K-12 curriculum, teachers face the challenge of gaining basic engineering literacy, while developing the associated inclusive pedagogies necessary to integrate engineering content into their classrooms. In this context, teacher preparation programs can benefit from easy-to-implement tools that measure preservice teachers’ readiness to integrate engineering content in their future classrooms. This work describes the development and validation …

The Intersection Of Culturally Responsive Pedagogy And Engineering Design In Secondary Stem, Mariam Manuel, Jessica Gottlieb, Gina Svarovsky, Rebecca Hite

Journal of Pre-College Engineering Education Research (J-PEER)

The instructional practices of the engineering design process and culturally responsive pedagogy have each garnered national attention and multiple decades of research. Findings from the respective literature bases call for educators and policymakers to integrate these two pedagogical approaches into K-12 classroom instruction. Scholars have argued that this integration would improve student engagement and academic achievement. There is a significant amount of research that supports the positive student outcomes associated with each approach, yet there remains a dearth of literature that addresses the integration of these two practices into the science and mathematics content areas. The movement around educational reform …

Elementary Teacher Adaptations To Engineering Curricula To Leverage Student And Community Resources, Jennifer L. Chiu, Sarah J. Fick, Kevin W. Mcelhaney, Nonye Alozie, Reina Fujii

Journal of Pre-College Engineering Education Research (J-PEER)

This paper addresses an important consideration for promoting equitable engineering instruction: understanding how teachers contextualize curricular materials to draw upon student and community resources. We present a descriptive case study of two 5th grade teachers who co-designed a Next Generation Science Standards (NGSS)-aligned curricular unit that integrated science, engineering, and computational modeling. The five-week project challenged students to redesign their school grounds to reduce water runoff and increase accessibility for students with disabilities. The teachers implemented the project with one Grade 5 class with a large proportion of students having individualized learning plans and cultural backgrounds minoritized in science, technology, …

You Want Me To Teach Engineering? Impacts Of Recurring Experiences On K-12 Teachers’ Engineering Design Self-Efficacy, Familiarity With Engineering, And Confidence To Teach With Design-Based Learning Pedagogy, Shaunna Smith, Kimberly Talley, Araceli Ortiz, Vedaraman Sriraman

Journal of Pre-College Engineering Education Research (J-PEER)

This paper reports on findings from a group of ten teachers who were enrolled in a semester-long, graduate-level educational technology course that used design-based learning to explore the integration of making and the engineering design process into a variety of K-12 educational contexts. Using convergent mixed methods, this study examines how the course impacted teachers’ familiarity and confidence in teaching the engineering design process, as viewed through their pre- and post-semester engineering design self-efficacy scores and their weekly reflective journal entries. These measures are important factors for developing teacher experience and confidence in integrating engineering and design-based learning strategies within …

Establishing A Content Taxonomy For The Coherent Study Of Engineering In P-12 Schools, Greg Strimel, Tanner Huffman, Michael Grubbs, Eunhye Kim, Jamie Gurganus

Journal of Pre-College Engineering Education Research (J-PEER)

Engineering education has increasingly become an area of interest at the P-12 level, yet attempts to align engineering knowledge, skills, and habits to existing elementary and secondary educational programming have been parochial in nature (e.g., for a specific context, grade, or initiative). Consequently, a need exists to establish a coherent P-12 content framework for engineering teaching and learning, which would serve as both an epistemological foundation for the subject and a guide for the design of developmentally appropriate educational standards, performance expectations, learning progressions, and assessments. A comprehensive framework for P-12 engineering education would include a compelling rationale and vision …

The Effect Of Teacher Professional Development On Implementing Engineering In Elementary Schools, Teresa Porter, Meg E. West, Rachel L. Kajfez, Kathy L. Malone, Karen E. Irving

Journal of Pre-College Engineering Education Research (J-PEER)

Increased attention on the implementation of engineering education into elementary school classrooms aims to start preparing students early for potential engineering careers. In order to efficiently and effectively add engineering concepts to the curriculum, appropriate development and facilitation of engineering design challenges are required. Therefore, professional development programs are necessary to educate teachers about engineering and how to adequately teach it. This paper explores the effects of an engineering professional development program for practicing teachers. The program included training elementary teachers about how to implement units from Engineering is Elementary (EiE) by the Science Museum of Boston into their classes. …

Elementary Teachers’ Positive And Practical Risk-Taking When Teaching Science Through Engineering Design, Jeffrey Radloff, Brenda Capobianco, Annie Dooley

Journal of Pre-College Engineering Education Research (J-PEER)

This study examines the perspectives of three generations of elementary teachers learning to teach science using engineering design and the risks associated with implementing this innovative type of reform-based science instruction. Data were gathered using semi-structured interviews, classroom observations, and teacher reflections. Data analysis entailed open coding and document analysis. The findings indicated that there were four types of perceived risks: practical, pedagogical, conceptual, and personal. First-generation teachers exhibited conceptual risk-taking behavior, while second- and third-generation teachers reported practical, pedagogical, and personal risks. Benefits of risk-taking included increased student engagement in science, improved self-confidence in teaching science, and greater teacher …

Refining An Instrument And Studying Elementary Teachers’ Understanding Of The Scope Of Engineering, Jacob Pleasants, Joanne K. Olson

Journal of Pre-College Engineering Education Research (J-PEER)

To effectively incorporate engineering into their instruction, K–12 teachers need sufficient knowledge of the engineering discipline. An important component of teachers’ engineering knowledge is their understanding of the nature of engineering: what engineers do, the epistemological underpinnings of engineering, and the relationships between engineering and other fields of study. In this study, we present a quantitative tool that was developed to assess teachers’ knowledge of a particular nature of engineering dimension: the scope of engineering, which describes the demarcation between engineering and non-engineering. This tool was used to assess the knowledge of teachers and engineering graduate students, before and after …

Search And Review Of The Literature On Engineering Design Challenges In Secondary School Settings, Matthew Lammi, Cameron Denson, Paul Asunda

Journal of Pre-College Engineering Education Research (J-PEER)

Engineering design activities offer the promise of enhanced learning and teaching in pre-college science, technology, engineering, and mathematics (STEM) settings. The wide variation and lack of coherence in research and practice concerning pre-college engineering design challenges necessitates an investigation of the literature. The overarching research question guiding this search and review of literature was, ‘‘How are engineering design challenges conceptualized in pre-college environments?’’ A search and review coupled with iterative thematic analysis was employed to understand and conceptualize the current body of literature on pre-college engineering design challenges. It is anticipated that this review will provide a general picture of …

Ascertaining The Impact Of P–12 Engineering Education Initiatives: Student Impact Through Teacher Impact, Marissa H. Forbes, Jacquelyn F. Sullivan, Denise W. Carlson

Journal of Pre-College Engineering Education Research (J-PEER)

The widespread need to address both science, technology, engineering, and math (STEM) education and STEM workforce development is persistent. Underscored by the Next Generation Science Standards, demand is high for P–12 engineering-centered curricula. TeachEngineering is a free, standards-aligned NSF-funded digital library of more than 1,500 hands-on, design-rich K–12 engineering lessons and activities. Beyond anonymous site-user counts, the impact of the TeachEngineering collection and outreach initiatives on the education of children and their teachers was previously unknown. Thus, the project team wrestled with the question of how to meaningfully ascertain classroom impacts of the digital engineering education library and—more broadly—how to …

Perspectives On Failure In The Classroom By Elementary Teachers New To Teaching Engineering, Pamela S. Lottero-Perdue, Elizabeth A. Parry

Journal of Pre-College Engineering Education Research (J-PEER)

This mixed methods study examines perspectives on failure in the classroom by elementary teachers new to teaching engineering. The study participants included 254 teachers in third, fourth, and fifth grade who responded to survey questions about failure, as well as a subset of 38 of those teachers who participated in interviews about failure. The study first examines the literature about failure in the contexts of engineering and education. Failure is positioned as largely normative and expected in engineering, whereas in education, learning and failure have a more tenuous relationship. Identity, failure avoidance, failure as part of the learning process, growth …

Undergraduate Engineers And Teachers: Can Students Be Both?, Malinda S. Zarske, Maia L. Vadeen, Janet Y. Tsai, Jacquelyn F. Sullivan, Denise W. Carlson

Journal of Pre-College Engineering Education Research (J-PEER)

Today’s college-aged students are graduating into a world that relies on multidisciplinary talents to succeed. Engineering college majors are more likely to find jobs after college that are outside of STEM (science, technology, engineering, and mathematics) fields, including jobs in healthcare, management, and social services. A survey of engineering undergraduate students at the University of Colorado Boulder in November 2012 indicated a desire by students to simultaneously pursue secondary teacher licensure alongside their engineering degrees: 25 percent ‘‘agreed’’ or ‘‘strongly agreed’’ that they ‘‘would be interested in earning grades 7–12 science or math teaching licenses while [they] earn [their] engineering …

Elementary Teachers’ Reflections On Design Failures And Use Of Fail Words After Teaching Engineering For Two Years, Pamela S. Lottero-Perdue, Elizabeth A. Parry

Journal of Pre-College Engineering Education Research (J-PEER)

This mixed-methods study examines how teachers who have taught one or two units of the Engineering is Elementary (EiE) curriculum for two years reported on: students’ responses to design failure; the ways in which they, the teachers, supported these students and used fail words (e.g. fail, failure); and the teachers’ broad perspectives and messages to students about failure. In addition, the study explores how strategies, perspectives, messages, and fail word use may change after two years of engineering instruction. This study builds on previous work about elementary teachers’: perspectives on failure prior to teaching engineering, and responses to and perspectives …

Professional Development For The Integration Of Engineering In High School Stem Classrooms, Jonathan E. Singer, Julia M. Ross, Yvette Jackson-Lee

Journal of Pre-College Engineering Education Research (J-PEER)

Science, Technology, Engineering, and Mathematics (STEM) education in the U.S. is in transition. The recently published A Framework for K-12 Science Education: Practices, Crosscutting Concepts, and Core Ideas as well as the Next Generation Science Standards are responsive to this call and clearly articulate a vision that includes engineering practices as key components. This shift presents significant challenges to school districts owing to a stark lack of research-based engineering-focused instructional materials and corresponding teacher professional development. The purpose of this study was to investigate the impact of a professional development program on high school STEM teachers’ ability to enact design-based …

Driven By Beliefs: Understanding Challenges Physical Science Teachers Face When Integrating Engineering And Physics, Emily A. Dare, Joshua A. Ellis, Gillian H. Roehrig

Journal of Pre-College Engineering Education Research (J-PEER)

It is difficult to ignore the increased use of technological innovations in today’s world, which has led to various calls for the integration of engineering into K-12 science standards. The need to understand how engineering is currently being brought to science classrooms is apparent and necessary in order to address these calls for integration. This multiphase, mixed-methods study investigated the classroom practices and beliefs of high school physical science teachers following an intensive professional development on physics and engineering integration.

Classroom observations showed that teachers new to incorporating engineering into their physical science classrooms often struggled to maintain focus on …

Design Practices Of Preservice Elementary Teachers In An Integrated Engineering And Literature Experience, Kristen Bethke Wendell

Journal of Pre-College Engineering Education Research (J-PEER)

The incorporation of engineering practices and core ideas into the Next Generation Science Standards at the elementary school level provides exciting opportunities but also raises important questions about the preparation of new elementary teachers. Both the teacher education and engineering education communities have a limited literature base on the resources that novice elementary teachers bring to learning and teaching engineering. The purpose of this descriptive exploratory research study was to characterize the design practices used by preservice elementary teachers during an integrated engineering and literature experience. Using a modification of the Design Activity Coding Scheme (Atman et al., 2007), we …