Engineering Commons^™

Insen 2023 Yearly Updates, Walid Metwally, Matteo Gerlini, Cristen Ford, João Claudio Batista Fiel J.C.B.F., Dr. Alpana Goel

International Journal of Nuclear Security

The International Nuclear Security Education Network (INSEN) is the primary international network for nuclear security educational initiatives. INSEN plays a central role in fostering collaboration and knowledge-sharing among nuclear security education experts worldwide. In the wake of the global pandemic, INSEN remained committed to strengthening nuclear security education and resumed in-person activities. The International Atomic Energy Agency (IAEA) confirmed its continued dedication and support to the network’s mission and presented new activities aimed at elevating global nuclear security efforts.

Throughout the year and during the annual and leadership meetings, working groups showcased their vibrant work and presented innovative ideas, invigorating …

Modified Zero-Gravity Chair In The Management Of Pain And Anxiety With Emphasis On Pre And Post Anesthesia For Surgical Procedures, Alexander Tisdale, Kinsley Batson, Zachary Jamous, Isabella Termini, Kyle Mooday, Matt Cohn, Jackson Justice

Annual Research Symposium

The purpose of this research is the integration of a zero-gravity chair with planar vibration as a non-pharmaceutical approach to preoperative anxiety and postoperative pain management. The treatment plan involves preoperative familiarization with the chair's vibrational patterns and postoperative use for pain relief. Integration of this approach holds promise in reshaping postoperative care paradigms, advocating for personalized, holistic interventions to enhance patient well-being and mitigate opioid-related risks.

Converting Mass And Energy Balance Chemical Engineering Concepts Into Fundamentals Of Environmental Engineering (Enve 210), Kaycie Lane

UNL Faculty Course Portfolios

This evaluation of teaching examined the Fall 2023 semester of ENVE 210: Fundamentals of Environmental Engineering. The purpose of this study was to change the format of the class from a lecture-based to a flipped classroom approach through the use of pre-lectures, in-class problem sets and group work activities. In addition, this study aimed to better adapt chemical engineering textbook content related to mass and energy balances to environmental engineering by creating new environmental engineering specific and sustainable development problems. The study learning outcomes proved difficult to implement and evaluate in a hybrid distance learning class and will require future …

Reducing Food Scarcity: The Benefits Of Urban Farming, S.A. Claudell, Emilio Mejia

Journal of Nonprofit Innovation

Urban farming can enhance the lives of communities and help reduce food scarcity. This paper presents a conceptual prototype of an efficient urban farming community that can be scaled for a single apartment building or an entire community across all global geoeconomics regions, including densely populated cities and rural, developing towns and communities. When deployed in coordination with smart crop choices, local farm support, and efficient transportation then the result isn’t just sustainability, but also increasing fresh produce accessibility, optimizing nutritional value, eliminating the use of ‘forever chemicals’, reducing transportation costs, and fostering global environmental benefits.

Imagine Doris, who is …

Barriers To Use Of Cross-Laminated Timber In Maine, Shane R. O'Neill

Forest Resources Faculty Scholarship

To increase understanding of both the adoption rate and in-state manufacturing of mass timber In Maine, the 131^st Legislature and Governor Mills passed LD 881, a resolve directing a study of the barriers facing cross-laminated timber In Maine and provide recommendations to promote their use in construction. This study was developed in response to the resolve. The study engaged 108 unique participants to define available training, education, and experiences across the stakeholders throughout the building lifecycle process in the state.

From this information, the following five recommendations are proposed:

1. Understand the policies and initiatives of other states to develop …

Infographic: Girls’ Interest In Engineering, Dominique Russell

Teacher infographics

It's well-known that women are underrepresented in participation in STEM education and the STEM workforce. The 2021 Youth in STEM study surveyed participants about their awareness and perception of STEM subjects and careers. As this infographic shows, the findings reveal age is important for girls when it comes to interest in studying engineering.

Teaching To Develop Perspective, Skills, Confidence, And Identity As Problem-Solving Engineers, Russell Kirk Pirlo

Research and Reflection on Learning and Teaching in Higher Education

The “core” of an engineering degree program typically comprises the concepts, equations, and technical skills needed, as well as their practical application to common problems of the profession. This core is then divided into the “content” that must be covered in each course. It is widely recognized, however, that successful individuals do not thrive as professionals on content alone. Thus, there is significant and increasing emphasis across higher education to “educate the whole person.” These efforts aim to develop “deep” qualities like grit, critical thinking, perseverance, learning from failure, valuing diversity, teamwork, leadership, curiosity, recognizing opportunity, creating value, and acting …

Eipeck: Assessing Educators’ Pedagogical Content Knowledge For Engineering Integration In K-12, Pilar Pazos, Francisco Cima Cohuo, Jennifer Kidd, Kristie Gutierrez, Krishnanand Kaipa, Orlando Ayala

Journal of Pre-College Engineering Education Research (J-PEER)

Global efforts are underway to include engineering in pre-college curricula. In the USA, this pursuit led to the inclusion of engineering content in the most recent version of the Next Generation Science Standards that guide K-12 science. As these standards become part of the K-12 curriculum, teachers face the challenge of gaining basic engineering literacy, while developing the associated inclusive pedagogies necessary to integrate engineering content into their classrooms. In this context, teacher preparation programs can benefit from easy-to-implement tools that measure preservice teachers’ readiness to integrate engineering content in their future classrooms. This work describes the development and validation …

Systems Thinking Applied To Higher Education Curricula Development, Reza Rahdar, Mark London, Yuetong Lin, Hong Jiang

Publications

Systems Thinking (ST) is a general and yet nebulous term that describes an approach to understanding and working with complexity in the real world. ST seeks to evaluate different behaviors of individual system elements when they operate in isolation as opposed to when they are integrated as part of a larger system and placed within a particular operating environment. The education environment consists of multiple systems with different digital content, learning goals/outcomes that serve different stakeholders including teachers, learners, and administrators. The inherent complexity and interaction among these various educational system elements and functions make this environment a worthy candidate …

Keeping Calm And Staying Balanced: Exploring The Academic Pressures Faced By Engineering Students To Attain High Grades And Their Impact On Mental Health, Eleazar Marquez, Samuel Garcia

Mechanical Engineering Faculty Publications and Presentations

Studies reveal that grades have a short-term impact on students’ self-efficacy, motivation, and decision making. Earning high grades has become a focal point for engineering students to secure three types of opportunities: internships, post-graduation employment, and graduate school acceptance. Nonetheless, the desire to attain a competitive grade-point-average may lead to negative psychosocial effects such as increased mental exertion, physical exhaustion, anxiety, and overall lack of work-life balance. In this paper, the authors extend their prior study on the impact of grades in engineering education. The first study was conducted in the spring of 2019 at a tier one, small private …

Bend And Not Break: Examining Hispanic Engineering Student's Academic Challenges During Covid-19, Eleazar Marquez, Samuel Garcia

Mechanical Engineering Faculty Publications and Presentations

Student success in higher education remains an area of interest, particularly for underrepresented minorities. Studies reveal that while Latino college enrollment has increased, retention rates continue to be an ongoing struggle. Several factors that attribute to such low rates include academic self-concept, family support, cognitive mapping, managing resources, background characteristics, and separation and maintenance of family ties. In the wake of COVID-19, most institutions responded by terminating in-person instruction, mandating to seek off-campus housing, and shifting to a fully remote context. As such, students were unable to utilize campus resources and engage in established educational campus practices. In this research …

Leveling The Playing Field: Enacting Equitable Pedagogy To Teach Rigid Body Dynamics, Eleazar Marquez, Samuel Garcia

Mechanical Engineering Faculty Publications and Presentations

Research examining the quality of engineering programs across different instructions of learning has revealed that no two programs are alike. Each program has unique and distinctive features that influence the quality and rigor of education that students receive. Institutional culture, leadership, faculty preparedness, funding and many other factors influence program quality. Additionally, researchers have also noted that many institutional gaps and equity related issues are persistent and troublesome facets that further exacerbate the academic gaps in STEM education. It is within this context, that students attending top tier universities will likely have remarkedly vast academic experiences in terms of level …

How Students Investigate: Understanding Students’ Use Of Scientific Schemas In Open-Ended Labs, J. Alexander Wall

Masters of Education in Teaching and Learning

Schema provides a theoretical framework for understanding the nature of science, inquiry, and open-ended labs. These topics have been emphasized in the state standards, especially in high school sciences. In this study the researcher took field notes, collected lab write ups, and conducted focus group interviews to understand students’ use of schema related to open-ended labs. These data were analyzed with the constant comparative method to generate themes. The author describes the major findings with parallel narratives, one focused on a student’s confusion and the other focused on a student’s understanding. The author concludes by advocating for science teachers to …

Multiple Case Study Of Science And Engineering Integration In Secondary School Across Six School Districts, Elizabeth Hasseler, Elizabeth B. Lewis

Department of Teaching, Learning, and Teacher Education: Faculty Publications

A multiple case study was conducted to investigate six districts’ approaches to integrating science and engineering curricula in their secondary education programs. Data collected included classroom observations, interviews with teachers and administrators, college transcripts, professional development, and curriculum, as well as how, and how district personnel supported, and teachers enacted classroom instruction to align with the Next Generation Science Standards (NGSS). Six districts were chosen due to their ranges in their size, urban or rural context, and demographics. There were 25 participants in the study who were either district personnel or secondary teachers. All school districts in the study incorporated …

The Intersection Of Culturally Responsive Pedagogy And Engineering Design In Secondary Stem, Mariam Manuel, Jessica Gottlieb, Gina Svarovsky, Rebecca Hite

Journal of Pre-College Engineering Education Research (J-PEER)

The instructional practices of the engineering design process and culturally responsive pedagogy have each garnered national attention and multiple decades of research. Findings from the respective literature bases call for educators and policymakers to integrate these two pedagogical approaches into K-12 classroom instruction. Scholars have argued that this integration would improve student engagement and academic achievement. There is a significant amount of research that supports the positive student outcomes associated with each approach, yet there remains a dearth of literature that addresses the integration of these two practices into the science and mathematics content areas. The movement around educational reform …

Challenge-Based Learning & Steam Curriculum, Diana Lockwood

The STEAM Journal

STEAM education is being integrated into elementary schools as a way to engage more students in creativity, hands-on learning, and problem-based learning also referred to as Challenge-Based-Learning (CBL). This article focuses on elementary educators’ curriculum design for STEAM and presenting students with open-ended questions phrased as a challenge as a way to raise student interest and achievement (DeJarnette, 2018; Hunter-Doniger, 2018). When students received challenges to solve, they felt more open to sharing their ideas since there was more than one potential right answer (DeJarnette, 2018; Drake, 2012). When implementing CBL, teachers act as facilitators using a constructivist approach as …

Examining Elementary Teachers’ Self-Efficacy To Teach Engineering: The Impact Of Project Lead The Way Launch Professional Development, Branden Robert Hoefert

Dissertations and Theses

Today’s elementary teachers are expected to teach the engineering practices included in the National Research Council’s Framework for K-12 Science Education and the Next Generation Science Standards. Recent studies have indicated that teachers are less self-efficacious in teaching engineering than in other subject areas. Project Lead the Way (PLTW) is a nonprofit organization that offers pre-K–12th grade curricula and teacher training focused on three pathways: engineering, computer science, and biomedical science. Due to the COVID-19 pandemic, PLTW transitioned its teacher trainings to a virtual modality. At the time of this study, most of PLTW’s teacher training remained virtual or hybrid. …

A Tutoring Framework To Support Computer Science Programmes In Higher Education, Emer Thornbury, Frances Sheridan, Pramod Pathak, Cristina Hava Muntean, Paul Stynes

Conference papers

Computing Support is the provision of academic supports such as individual tutoring and support classes to students studying computing at third level. Students can struggle with computing as it requires practice involving trial and error. This work proposes a research informed tutoring framework to support computer science students at third level. The tutoring framework combines three pillars; staff and training, pedagogies and activities. Support is put in place to help students develop technical and programming skills. Essential tutoring is provided for those who might otherwise drop out of college. The framework was applied to first and second-year undergraduate programmes and …

Collegiate Aviation Students’ Perceptions Towards The Integration Of Diversity And Inclusion Training: A Qualitative Case Study, Jorge L. D. Albelo Ph.D., Nicola M. O'Toole M.S., Eugene Kim B.S.

Journal of Aviation/Aerospace Education & Research

Multiple industries have become more supportive and engaging places to work by embedding diversity, equity, and inclusion within their institutional processes. Institutions of higher education have seen the educational benefits of integrating diversity and inclusion principles within their program outcomes. Notably, the aviation industry has seen an increase in diversity, equity, and inclusion practices to attract more customers and increase the number of potential applicants. Yet, there is scant literature on how aviation students at collegiate flight institutions perceive the integration of diversity and inclusion training within the airline industry as part of their career development. This study aimed to …

Global Engineering Ethics: What? Why? How? And When?, Rockwell F. Clancy Iii, Qin Zhu

Journal of International Engineering Education

Even though engineering programs, accreditation bodies, and multinational corporations have become increasingly interested in introducing global dimensions into professional engineering practice, little work in the existing literature provides an overview of questions fundamental to global engineering ethics, such as what global engineering ethics is, why it should be taught, how it should be taught, and when it should be introduced. This paper describes the what, why, how, and when of global engineering ethics – a form adopted from a 1996 article by Charles Harris, Michael Davis, Michael Pritchard, and Michael Rabins, which has influenced the development of engineering ethics for …

Creating The Next Generation Of Aviation Professionals: Creating Diversity In The Next Generation, Jason T. Lorenzon

National Training Aircraft Symposium (NTAS)

Covid-19, mandatory retirement age, the 1500 Hour ATP rule and lack of future aviation professionals has lead to a global industry crisis. With the boom of the 1990’s, 9/11, the Great Recession, Covid-19, the lack of younger individuals dedicating themselves to the study of aviation has led to a current crisis of a lack of aviation professionals ready to serve the industry currently and in the future. Lorenzon will trace how the work force shortage started well over twenty years ago. Boeing and Airbus both predict that over 2.2 million new workers including over 600000 pilots will be needed. Yet …

Making In Media Education: An Activity-Oriented Approach To Digital Literacy, Thomas Knaus

Journal of Media Literacy Education

Why is maker education a suitable approach for giving learners the 21st century skills they need to cope with the digital transformation? This article provides an answer and represents a defense of maker education in the field of educational science. Taking a human-media-machine interaction model as the basis for discussion, this article highlights the growing importance of digital technology as well as technological principles for human communication and interaction. Communication technology and the influence of technology on culture and society require a broad understanding of media literacy in the sense of digital literacy. By broadening the theoretical basis of media …

Instructional Systems Design And The Diffusion And Adoption Of Technology: (Volume 1), Miguel Ramlatchan (Author & Editor), Mark Parsons (Author), Meghan Soldani (Author), Josie Joswick Mendoza (Author), Maria Satre (Author), Brittany Spitz (Author), Jasmine Bundy (Author), Amanda Kline (Author)

Distance Learning Faculty & Staff Books

Instructional designers, instructional systems designers, and other educational technologists are, by their nature, innovators. These professionals apply and extend the applied science of learning, systems, communication, and instructional design theory to help students learn. Technology in some capacity is used to make the connections between subject matter experts, teachers, instructors, and their learners. It is common for instructional designers to seek new tools, techniques, and innovations for the improvement of learning, access, quality, and student satisfaction. However, the adoption and diffusion of new educational technology and innovation is a complex process that depends on many variables. Understanding these processes and …

Science, Technology, Engineering, And Mathematics (Stem) Project-Based Learning (Pbl) Education: A New Mexico Case Study For Equity And Inclusion, Kimberly A. Scheerer

Teacher Education, Educational Leadership & Policy ETDs

This research addresses how student participation in Science, Technology, Engineering, and Mathematics (STEM) project-based learning (PBL) education activities encourages underrepresented minority student achievement in STEM career field trajectories. Seven New Mexico high school counselors and 12 STEM organization personnel were interviewed during this study. Their responses represent the nuanced professional voices where New Mexico public education intersects with STEM student interest and cultural influence.

For students, STEM PBL can foster deep integration across educational disciplines and enhance STEM career trajectory interest and readiness. STEM education converged with PBL methodologies has the ability to leverage community support while broadening student networks. …

Bbt Acoustic Alternative Top Bracing Cadd Data Set-Norev-2022jun28, Bill Hemphill

STEM Guitar Project’s BBT Acoustic Kit

This electronic document file set consists of an overview presentation (PDF-formatted) file and companion video (MP4) and CADD files (DWG & DXF) for laser cutting the ETSU-developed alternate top bracing designs and marking templates for the STEM Guitar Project’s BBT (OM-sized) standard acoustic guitar kit. The three (3) alternative BBT top bracing designs in this release are
(a) a one-piece base for the standard kit's (Martin-style) bracing,
(b) 277 Ladder-style bracing, and
(c) an X-braced fan-style bracing similar to traditional European or so-called 'classical' acoustic guitars.

The CADD data set for each of the three (3) top bracing designs includes …

Bbt Side Mold Assy, Bill Hemphill

STEM Guitar Project’s BBT Acoustic Kit

This electronic document file set covers the design and fabrication information of the ETSU Guitar Building Project’s BBT (OM-sized) Side Mold Assy for use with the STEM Guitar Project’s standard acoustic guitar kit. The extended 'as built' data set contains an overview file and companion video, the 'parent' CADD drawing, CADD data for laser etching and cutting a drill &/or layout template, CADD drawings in AutoCAD .DWG and .DXF R12 formats of the centerline tool paths for creating the mold assembly pieces on an AXYZ CNC router, and support documentation for CAM applications including router bit specifications, feeds, speed, multi-pass …

Making In Media Education: An Activity-Oriented Approach To Digital Literacy, Thomas Knaus

Journal of Media Literacy Education Pre-Prints

Why is maker education a suitable approach for giving learners the 21^st century skills they need to cope with the digital transformation? This article provides an answer and represents a defense of maker education in the field of educational science. Taking a human-media-machine interaction model as the basis for discussion, this article highlights the growing importance of digital technology as well as technological principles for human communication and interaction. Communication technology and the influence of technology on culture and society require a broad understanding of media literacy in the sense of digital literacy.

Secondary Science Teachers’ Curricular Use Of Ngss Engineering Practices, Elizabeth Hasseler, Amy Tankersley, Ana M. Rivero, Lyrica L. Lucas, Elizabeth B. Lewis

Department of Teaching, Learning, and Teacher Education: Faculty Publications

We investigated how often teachers integrated engineering into science lessons to address Next Generation Science Standards (NGSS) performance expectations using data from a multi-year study of secondary science teachers. Only 7.14% of middle school (MS) lessons contained engineering practices. Engineering was included in lessons for students to apply or support the learning of scientific content.

Presider: Amy Tankersley

Spring 2022 Superhydrophobic Materials, T. Leo Liu

Science and Engineering Saturday Seminars

Many natural surfaces, such as lotus leaves and a water strider’s leg, have shown striking water repellency so that they remain clean and dry even in “dirty” habitats. Such water repellency is called superhydrophobicity, which has stimulated lots of science and engineering imagination for self-cleaning windows, never dirty clothes, drag-reduction swimming suits, etc. In this workshop, we will use superhydrophobicity as a model to guide an integrative teaching and learning experience through hands-on experiments, critical thinking, basic science, as well as a lecture on state-of-the-art research discoveries. The objectives of this workshop are to (1) stimulate student curiosity and imagination …

Cive 440: Reinforced Concrete Design I: Faculty-Led Inquiry Into Reflective And Scholarly Teaching (First) Course Portfolio, Chungwook Sim

UNL Faculty Course Portfolios

This Faculty-led Inquiry into Reflective and Scholarly Teaching (FIRST) Course Portfolio documents the instructor’s teaching practices and student learning for Reinforced Concrete Design I (CIVE 440) course. The contents of this course portfolio captures the CIVE 440 course that was taught on the Lincoln campus during the semester of Fall 2022. CIVE 440 is a structural engineering design elective offered every year in the Department of Civil and Environmental Engineering on both Lincoln and Omaha campus at University of Nebraska-Lincoln (UNL). The course objective is to help students to be able to use theory and experience to proportion and detail …