Engineering Commons^™

A Comprehensive Review Of Fischer-Tropsch Synthesis Processes To Produce Sustainable Diesel And Aviation Fuel, Joseph C. Steinagel

Honors College Theses

The greatest threat known to humankind today is global warming. It affects every nation on the planet and the natural order of all living things. Consequently, this ongoing crisis necessitates action to scientifically revolutionize important areas of society, including researching modern adaptations of the transportation industry. In that regard, it has been determined that an effective short-term answer to eliminating carbon emissions is to produce sustainable fuels that run cooperatively with the well-established machines of today. Sustainable aviation fuel (SAF) is one such topic of interest, and the Fischer-Tropsch synthesis process is an effective way of producing SAF. To that …

Navigating The Relationships Among Food Waste Practices, Environmental Intentions, And Sustainability Knowledge Of Students, Merri Claire Minshew

Honors College Theses

Colleges and university campuses are among the greatest food wasters in the US due to combined over production and plate waste from consumers. While some schools have developed programs aimed at reducing and sustainably managing food waste, much of it ends up in landfills and produces greenhouse gas emissions. The overall goal of the research was to collect a comprehensive data set on university students’ food waste practices and behavior, environmental and sustainability knowledge, and environmental intentions. For probing relationships among these drivers, a structural equation model and student survey was developed. The survey of 37 questions was collected on …

Effect Of Waste Covid-19 Masks On Compaction Characteristics Of Silty-Clay Soil, Sydney K. Lawson

Honors College Theses

The present study aims to explore the effect of adding shredded waste Covid-19 masks to silty-clay soil on the soil’s compaction characteristics for beneficial use in embankment, the subgrade of roadways, or backfill. This was accomplished by using two different types of masks: blue surgical masks and KN95 masks. Both mask types were hand shredded into half-inch sections using safety-scissors. The maximum dry density (MDD) and optimum moisture content (OMC) are the two most important compaction characteristics, and they were determined by the Standard Proctor Compaction Test (ASTM D698 / AASHTO T99). The change of both the MDD and OMC …

Brain Computer Interface-Based Drone Control Using Gyroscopic Data From Head Movements, Ikaia Cacha Melton

Honors College Theses

This research explores the potential of using gyroscopic data from a person’s head movement to control a DJI Tello quadcopter via a Brain-Computer Interface (BCI). In this study, over 100 gyroscopic recordings capturing the X, Y and Z columns (formally known as GyroX, GyroY, GyroZ) between 4 volunteers with the Emotiv Epoc X headset were collected. The Emotiv Epoc X data captured (left, right, still, and forward) head movements of each participant associated with the DJI Tello quadcopter navigation. The data underwent thorough processing and analysis, revealing distinctive patterns in charts using Microsoft Excel. A Python condition algorithm was then …

Aerodynamic Design And Analysis Of A Modified 2006 Mazda Miata, William N. Recher

Honors College Theses

Aerodynamic forces developed by automobiles have destabilizing effects at high speed. These forces tend to skew toward a vehicle’s rear which can present safety concerns, especially for rear-wheel-drive automobiles like the Mazda Miata. To address oversteer and high-speed instability, a vehicle’s design can be tailored to bring about aerodynamic balance and improve traction. LiDAR was used to bring the physical automobile into the digital space. Then, a splitter and diffuser were added to reduce the magnitude of the destabilizing forces. Next, the size and shape of the rear-wing required to balance the vehicle was calculated using a combination of parameters …

Exploration Of Characteristic Curve In Fox Float 3 Shock Dampers To Expedite Shock Damp Tuning., Joshua R. Moore

Honors College Theses

The shock absorber is an integral part of a vehicle suspension system and has a strong influence on its performance, especially in the case of motorsports. It is important to study the force versus velocity relationship, commonly known as the characteristic curve of the shock absorber both during compression and rebound. Vendor-supplied characteristics often reflect the behavior of the shock absorber in a particular setting. However, during the installation, the settings inside the shock absorber are adjusted to increase the human comfort level and performance of the vehicle. This may change the characteristic curve of the shock. The available data …

Enhancing Information Architecture With Machine Learning For Digital Media Platforms, Taylor N. Mietzner

Honors College Theses

Modern advancements in machine learning are transforming the technological landscape, including information architecture within user experience design. With the unparalleled amount of user data generated on online media platforms and applications, an adjustment in the design process to incorporate machine learning for categorizing the influx of semantic data while maintaining a user-centric structure is essential. Machine learning tools, such as the classification and recommendation system, need to be incorporated into the design for user experience and marketing success. There is a current gap between incorporating the backend modeling algorithms and the frontend information architecture system design together. The aim of …

Optimizing Anaerobic Digestion Of Food Waste And Industrial Sludge For Biogas Production, Emma R. Murray

Honors College Theses

Food waste is a major contributor to municipal solid waste, and its disposal at landfills has significant environmental and economic impacts. Opportunities need to be identified for the sustainable management of food waste at large scales. Pulp and paper mills throughout the country commonly use anaerobic digestion to treat their waste sludge; however, this sludge can consist of over 50% lignin, which is slowly or negligibly digested. This research aims to explore the sustainability of co-digestion of food waste and paper mill sludge. Lab-scale studies were used to assess the feasibility of anaerobic digestion by measuring treatment efficiencies and biogas …

Aerothermodynamic Analysis Of A Linear Aerospike Fueled With Liquid Methane Using Cfd, Aidan Rowell

Honors College Theses

Renewed interest in manned spaceflight, mostly spurred by the advancement of commercial spacecraft, has led to growing interest in improving the efficiency of rocket engines. Aerospike nozzles have the potential to provide this boost in efficiency to spacecraft and thus lower costs and increase payload capacity. This type of nozzle is what is known as altitude adjusting and can significantly increase efficiency. When paired with propellants such as methane/oxygen, which can be manufactured in-situ on some planetary bodies and has a higher density than traditional propellants like liquid hydrogen/liquid oxygen, even more efficiency gain can be achieved. To understand the …

Assessment Of Defect Generation Mechanism In Welding Processes Using Phased Array Ultrasonic Testing (Paut), Caleb D. Williams

Honors College Theses

Welding is one of the major and most commonly used methods of material joining in industries around the world. The mechanisms of welding include complicated processes which can cause significant alteration in final properties and quality of the weld compared to the base materials. Due to these physical and chemical processes during the welding processes, defects and flaws can be generated. Observing such flaws over the years, leads engineers and researchers to investigate the methodologies to identify the cause and effect of defects and their effect on the quality of the welds. A better understanding of such parameters helps to …

Development And Evaluation Of Blind Spot Detection Safety System Based On 2d-Lidar Technology As An Optimization For Adas Systems, Timothy J. Sutton

Honors College Theses

Distracted driving poses a significant safety hazard and will only exacerbate as the number of modern-day distractions increases. To mitigate this problem, Advanced Driver Assistance Systems (ADAS) features, such as blind spot detection, have been pivotal for the safer operation of vehicles. Towards the same objective, the goal of this research is to utilize 2D LiDAR sensors to create a blind spot detection system that will detect objects and surfaces that are outside of the driver’s field of view. A comparative analysis was conducted by developing a 2D LiDAR-based system utilizing NVIDIA Jetson Orion Nano and Python alongside an ultrasonic-based …

The Automated Wheelchair, Jonathan Doksa Kamba Ngoyi

Honors College Theses

Automation refers to the use of technology to execute tasks through programmed instructions and automated control mechanisms to ensure accurate execution. This minimizes human involvement and encompasses various fields, including business process automation. A notable form of automation is assistive technology, which refers to any device or software that enhances individuals' learning, communication, or overall functionality. This can range from advanced tools like computers to simpler aids like walking sticks. Assistive technology aims to promote inclusivity and participation, particularly among individuals with disabilities, the elderly, and those with non-communicable diseases.

The Automated Airport Wheelchair is a culmination of prior projects …

Sensor Updates For Bigheaded Carp-Tracking Autonomous Boat, Jordan Kaufmann

Honors College Theses

Bigheaded carp are an invasive species that overpopulate and compete with the native species of Kentucky Lake as well as many other North American aquatic ecosystems. The movement patterns of Bigheaded carp are being studied nationwide by the United States Geological Survey and multiple universities. These studies ultimately seek to control their spread and reduce or reverse the ecosystem destabilization caused by this invasive species. Such studies are currently conducted manually on Kentucky Lake by graduate students affiliated with the Murray State University (MSU) Biology Department and Hancock Biological Station, and these manual studies are an arduous and time-consuming effort. …

Designing The Power System Of A Robot, Nolan Hays

Honors College Theses

This thesis outlines the acquired skills and knowledge acquired through the course of four years of Murray State University’s School of Engineering. The capstone for students in the department was to team up and complete an interdisciplinary senior design project using skills from various tracks of engineering. For this thesis, there is a greater emphasis on the electrical engineering track. The objective of the project was to build an autonomous robot to complete the various tasks within the scope of the IEEE SoutheastCon 2023 Hardware Competition. The robot was controlled via a Raspberry Pi 4 Model B. There were three …

Steam Gasification Of Biochar To Produce Hydrogen-Rich Syngas, Nnamdi Ofuani

Honors College Theses

A key greenhouse gas (GHG) emission contributing to climate change is carbon dioxide (CO₂) emission. This emission is largely due to the use of fossil fuel as a major energy source. Biomass is an alternative energy source. Biochar, a byproduct of the pyrolysis process (of biomass), could be gasified to produce syngas (a mixture of CO and H₂). This syngas can further be used to produce different kinds of fuels like biodiesel, bio-gasoline, bioethanol, etc. In the steam gasification of biochar, the quality and yield of syngas is dependent on parameters such as temperature, particle size, …

Free-Body Diagram Analysis And Movement Design Of A Functional Prosthetic Hand, Hayden Smee

Honors College Theses

The loss of a limb is a devastating event to an individual on both physical and psychological levels. Despite decades of advancements in medicine, occupational health, and general safety in society, most people know someone or have encountered individuals affected by limb loss. This project created a prosthetic hand designed to aid those individuals. The hand is a predominantly 3D-printed prosthetic hand that includes an individually moving index finger and opposable thumb capable of grasping a full soda can weighing 385 grams (0.85 pounds). Numerous design solutions for the actuation of the fingers and thumb were considered and rejected. Cable …

Innovative Research For Phosphorus Recovery In Freshwater Sediments, An Experimental Framework, John D. Collins

Honors College Theses

Phosphorus, a finite element, is necessary for all living organisms and directly impacts biota growth as well as productivity in freshwaters. The demand for phosphorus is continually increasing, but the supply of phosphorus is continually decreasing. In response to depleting resources, phosphorus in surface water sediments is being explored as a sustainable solution to the forecasted phosphorus shortage. Phosphorus in sediments is generally bound to oxidized iron (Fe3+) forming iron phosphate complexes. This form of phosphorus is released when iron reduces to Fe2+ in anaerobic environments. Under such conditions, soluble phosphorus (i.e., orthophosphate) may then be recovered using compounds that …

A Proof-Of-Concept Study For An Elastohydrodynamic Seal Design, Cameron M. Stuart

Honors College Theses

Supercritical CO₂ (sCO₂) power cycles are superior to traditional water based, air-breathing, direct-fired, open Brayton cycles or indirect-fired, closed Rankine cycles in terms of efficiency and equipment size. They hold great potential in fossil fuel power plants, nuclear power production, solar power, geothermal power, and ship propulsion. To unlock the potential of sCO₂ power cycles, utilized technology must withstand 10–600 MWe and at sCO₂ temperatures and pressures of 350–700℃ and 20–35 MPa for nuclear industries. Amongst many challenges at the component level, the lack of suitable shaft seals for sCO₂ operating conditions needs to …

Utilization Of Machine Learning To Investigate Material State, Ana B. Abadie

Honors College Theses

The ability to predict material behavior that undergoes various loading conditions is critical to the development of reliable and safe components. Thermal and mechanical fatigue loading can cause significant damage to materials, leading to failure and potential safety hazards. Machine learning algorithms have emerged as a promising tool for improving accuracy and efficiency of predicting material behavior under such loading conditions. This research provides a comprehensive overview of a machine learning algorithm that is able to analyze and predict material state independently of the loading sequence. Unidirectional carbon fiber reinforced polymer (UD CFRP) composite which has undergone two different loading …

Exploration Of Collaborative Design Spaces: Engineering Interactions And Workflows In Product Development, Frederick Rowell

Honors College Theses

Product Lifecycle Management (PLM) initiatives can improve an enterprise’s efficiency by increasing collaborative design opportunities within its business structure. PLM solutions provide digital mediums to collaborate on all aspects of a company’s workflow, including engineering, testing, manufacturing, marketing, business, and field support services. This paper examines the major PLM tools and software used to establish a collaborative engineering design space; computer-aided design (CAD), computer-aided engineering (CAE), computer-aided manufacturing (CAM), and product data management (PDM). The interactions between these PLM tools and a design team’s organizational structure are analyzed to determine some of the most effective PLM integration strategies to improve …

Characterizing The Influence Of The Moc Support For The Pt Single Atom Catalyst For The Water Gas Shift Reaction, Kathryn Mcgee

Honors College Theses

In this report, we looked at characterizing the effect of the support (MoC) for the water gas shift (WGS) environment. The single-atom catalyst analyzed was platinum supported in molybdenum carbide. The primary focus of this report was CO* because of the strong interest in using the WGS reaction to convert CO* contamination. All calculations were performed using the density functional theory (DFT) method. We analyzed the binding energies for the different adsorbates, with a special emphasis on CO and charges of the support. We compared our results to Pt/Al₂O₃ support. We observed that the support, specifically MoC …

Understanding The Effect Of Nanointerfaces On Nanostructure And Mechanical Properties Of Semicrystalline Polymers Using Coarse-Grained Molecular Dynamic Simulations, Nayoung Kim

Honors College Theses

Polymer crystallization is a classical problem of polymer research. Many synthetic and natural polymers take the semi-crystalline form. Crystallization of polymers is a complex process associated with the partial alignment of their molecular chains. The final physical properties of semicrystalline polymers are determined by the degree of crystallinity and the size and orientation of the crystallites (nano- to micro-sized crystalline regions). Although it has been studied for many years, we still lack a fundamental understanding of the types of factors that influence the semicrystalline structure and how the structure affects the final properties. It is difficult because crystalline polymers are …

Green Hpc: Optimizing Software Stack Energy Efficiency Of Large Data Systems, Grant Wilkins

Honors College Theses

High-performance computing (HPC) is indispensable in modern scientific research and industry applications, but its energy consumption is a growing concern. This thesis presents two novel approaches to optimize energy consumption in large data systems. The first chapter of the thesis will discuss the use of Dynamic Voltage and Frequency Scaling (DVFS) to optimize the energy efficiency of two popular lossy compression algorithms: SZ and ZFP. By adjusting the voltage and frequency levels of computing resources, DVFS can reduce energy consumption while maintaining the desired level of performance and accuracy. The second chapter of the thesis will focus on a detailed …

Structure And Movement Design To Build A Functional Prosthetic Hand, John Campbell

Honors College Theses

This project aims to create a functional prosthetic hand that will improve upon the previous design for this project. The previous design included four fingers which were moved using a four-bar linkage and slider crank mechanism in combination with a linear actuator to move all four fingers in unison. Two servo motors were used to create an opposable thumb that could be used to grasp objects. Movement of the prosthetic hand was activated using a signal received from a myoelectric sensor. The goal of this project is to study this design and attempt to upgrade the prosthetic hand utilizing a …

Optical Sensing Of Capillary Waves, Matthew Franklin Reid

Honors College Theses

I relay various topics I learned about this semester and summarize the specialties of Clemson’s Micro-Photonics Laboratory. I report pertinent information for characterizing capillary waves with lasers and one recent method of characterizing them. Lastly, I outline a potential plan for mathematically modeling a laser’s reflection off of capillary waves, and potential plans moving forward.

Microwave Characterization Of Polymeric Microparticle Morphology, Gabriel D. Cutter

Honors College Theses

Biological cell function and overall health are highly defined by the cell’s morphology. Sorting cells based on their shape is recently a major interest to the biomedical field for the future of medical treatments and health diagnostics. This work presents a new shape-based particle sorting technique using a novel microwave sensing system as a step toward biological cell sorting. The new sensing system consists of a grounded coplanar waveguide (GCPW) transmission line that simultaneously serves as a single-particle microfluidic channel and a microwave sensor, which is paired with a microwave interferometer to boost signal-to-noise ratio (SNR). Polystyrene microspheres, a common …

Development Of 3d Ovarian Cancer Spheroids In Vitro And Investigation Of Their Physiological Relevance As Models Of Inherent Chemoresistance, Amanda Murray

Honors College Theses

Ovarian cancer is the sixth leading cause of death among women worldwide, with an average 5-year survival rate of less than 48%. Current clinical treatment methods for this disease are often deemed ineffective because of the innate chemoresistance of tumors due to their microenvironment and architecture. Accurately mimicking chemoresistance with traditional 2D cultures is difficult; therefore, recent years have seen an increase in 3D culturing methods that create cellular spheroids. These spheroids can serve as models of in vivo tumor characteristics due to their hypoxic core, acidic microenvironment, and increased cell-to-cell interactions. This research aims to (1) refine a 3D …

Cycle Time Reduction In Additive Manufacturing Using Peltier Thermoelectric Cooling Devices, Trevor Carlton

Honors College Theses

Thermoelectric cooling and the Peltier effect were discovered in 1834, over 188 years ago. Additionally, the first iterations of additive manufacturing (i.e., 3D printing) began in the early 1980s, more than 40 years ago. Despite these technologies’ age and years of advancements, the application of Peltier cooling-based devices in additive manufacturing has not yet been realized. These devices can be used for the active thermal management of print beds in 3D printers. Developing a mechanism to heat and cool a print bed can reduce the cycle time to manufacture a part. In 3D printing, waiting for the heated bed to …

Structural Design And Fabrication Of A Test Chamber To Test Ppes For Effective Particle Filtration, Matthew G. Adharsingh

Honors College Theses

This research project aims to design and fabricate a test chamber for testing Personal Protective Equipment (PPE) to ensure effective particle filtration. The chamber has a special purpose, which is to measure ultrafine and submicron particles concentration in the air and test the ergonomic design of PPE based on its effective filtration. The project also considers the environmental aspects of the chamber such as the level of noise and vibration. The chamber will be designed to measure upstream and downstream particle count. Initially, the chamber was going to be made from wood, but the research team encountered difficulties in the …

Optimization Of A Simultaneous Localization And Mapping (Slam) System For An Autonomous Vehicle Using A 2-Dimensional Light Detection And Ranging Sensor (Lidar) By Sensor Fusion, Shaen Mehrzed

Honors College Theses

Fully autonomous vehicles must accurately estimate the extent of their environment as well as their relative location in their environment. A popular approach to organizing such information is creating a map of a given physical environment and defining a point in this map representing the vehicle’s location. Simultaneous Mapping and Localization (SLAM) is a computing algorithm that takes inputs from a Light Detection and Ranging (LiDAR) sensor to construct a map of the vehicle’s physical environment and determine its respective location in this map based on feature recognition simultaneously. Two fundamental requirements allow an accurate SLAM method: one being accurate …