Engineering Commons^™

Design And Analysis Of An Asynchronous Microcontroller, Michael Hinds

Graduate Theses and Dissertations

This dissertation presents the design of the most complex MTNCL circuit to date. A fully functional MTNCL MSP430 microcontroller is designed and benchmarked against an open source synchronous MSP430. The designs are compared in terms of area, active energy, and leakage energy. Techniques to reduce MTNCL pipeline activity and improve MTNCL register file area and power consumption are introduced. The results show the MTNCL design to have superior leakage power characteristics. The area and active energy comparisons highlight the need for better MTNCL logic synthesis techniques.

Asynchronous Data Processing Platforms For Energy Efficiency, Performance, And Scalability, Liang Men

Graduate Theses and Dissertations

The global technology revolution is changing the integrated circuit industry from the one driven by performance to the one driven by energy, scalability and more-balanced design goals. Without clock-related issues, asynchronous circuits enable further design tradeoffs and in operation adaptive adjustments for energy efficiency. This dissertation work presents the design methodology of the asynchronous circuit using NULL Convention Logic (NCL) and multi-threshold CMOS techniques for energy efficiency and throughput optimization in digital signal processing circuits. Parallel homogeneous and heterogeneous platforms implementing adaptive dynamic voltage scaling (DVS) based on the observation of system fullness and workload prediction are developed for balanced …

Evaluating A Measure-Calculate Method For Determining Sediment Oxygen Demand In Lakes, Adrian Beirise

Graduate Theses and Dissertations

A steady-state mass diffusion model used with simple measurable and calculable inputs for determining sediment oxygen demand (SOD) is compared to an intact core incubation (ICI) SOD method using samples from three lakes. The mass diffusion model coupled with inputs is known as the measure-calculate method (M-C) and is a potential alternative to existing methods for measuring SOD which are more complex, time-consuming, and costly. The M-C method requires inputs for volumetric sediment oxygen uptake (Ṅsed), sediment density and porosity, and water properties. Ṅsed was determined by suspending sediment in oxygen-saturated water with a DO probe and determining the steady …

4d Printing Dielectric Elastomer Actuator Based Soft Robots, Jiyu Cai

Graduate Theses and Dissertations

4D printing is an emerging technology that prints 3D structural smart materials that can respond to external stimuli and change shape over time. 4D printing represents a major manufacturing paradigm shift from single-function static structures to dynamic structures with highly integrated functionalities. Direct printing of dynamic structures can provide great benefits (e.g., design freedom, low material cost) to a wide variety of applications, such as sensors and actuators, and robotics. Soft robotics is a new direction of robotics in which hard and rigid components are replaced by soft and flexible materials to mimic mechanisms that works in living creatures, which …

Study Of Plasmonic Properties Of The Gold Nanorods In The Visible To Near Infrared Light Regime, Pijush Kanti Ghosh

Graduate Theses and Dissertations

Nanostructures of noble metals show unique plasmonic behavior in the visible to near-infrared light range. Gold nanostructures exhibit a particularly strong plasmonic response for these wavelengths of light. In this study we have investigated optical enhancement and absorption of gold nanorods with different thickness using finite element method simulations. This study reports on the resonance wavelength of the sharp-corner and round-corner rectangles of constant length 100 nm and width 60 nm. The result shows that resonance wavelength depends on the polarization of the incident light; there also exists a strong dependence of the optical enhancement and absorption on the thickness …

Channel Estimation Overhead Reduction For Downlink Fdd Massive Mimo Systems, Abderrahmane Mayouche

Graduate Theses and Dissertations

Massive multiple-input multiple-output (MIMO) is the concept of deploying a very large number of antennas at the base stations (BS) of cellular networks. Frequency-division duplexing (FDD) massive MIMO systems in the downlink (DL) suffer significantly from the channel estimation overhead. In this thesis, we propose a minimum mean square error (MMSE)-based channel estimation framework that exploits the spatial correlation between the antennas at the BS to reduce the latter overhead. We investigate how the number of antennas at the BS affects the channel estimation error through analytical and asymptotic analysis. In addition, we derive a lower bound on the spectral …

Investigation Of Cnt-Induced Escherichia Coli Lysis And Protein Release, Abdollah Mosleh

Graduate Theses and Dissertations

This research investigated the use of carbon nanotubes (CNTs) as a treatment to increase the permeability of a bacterial cell wall. Recombinant Escherichia coli BL21 (DE3) containing a plasmid that expressed Green Fluorescent Protein (GFP) and -lactamase were exposed to CNTs under various levels of agitation for different times. Fluorescence assay for GFP, optical absorbance for -lactamase activity, and Transmission Electron Microscopy (TEM) were used to determine the amount of released protein, and visually examine the permeability enhancement of the cells, respectively. It was found that more -lactamase was present in the culture fluid after treatment with CNTs in a …

Modeling Economic Impacts Of The Inland Waterway Transportation System, Furkan Oztanriseven

Graduate Theses and Dissertations

The inland waterway transportation system of the United States (U.S.) handles 11.7 billion tons of freight annually and connects the heartland of the U.S. with the rest of the world by providing a fuel-efficient and environmentally friendly mode of transportation. This dissertation aims to create decision support tools for maritime stakeholders to measure the economic impacts of the inland waterway transportation systems under real world scenarios including disruptions, demand changes, port expansion decisions, and channel deepening investments. Monte Carlo simulation, system dynamics, discrete-event simulation, agent-based modeling, and multiregional input-output modeling techniques are utilized to analyze the complex relationships between inland …

Electrodeionization Versus Electrodialysis: A Clean-Up Of Produced Water In Hydraulic Fracturing, Brigitte Marie Rodgers

Graduate Theses and Dissertations

Electrodeionization (EDI) is a widely studied process ranging from applications in wastewater clean-up in the food and beverage industry to purifying organic compounds. To date, there are no apparent studies on applying this technology to produced wastewater recovered from hydraulic fracking sites. Water consumption within hydraulic fracturing sites can reach in the upwards of millions of gallons per site, so a need for a water recycling process becomes necessary within areas where water requirements are scarce. Implementation of an EDI module that is capable of handling high salt solutions from produced wastewater in subsequent fracturing practices will decrease overall water …

Initial Structural Subsidence As Reflected In Morrowan And Atokan (Pennsylvanian) Subsurface Stratigraphy, Northern Arkoma Basin, North-Central Arkansas, Fatimah Taher Nahi Al Asadi

Graduate Theses and Dissertations

The Arkoma Basin is a carboniferous foreland basin that is known for its prolific gas production. The objective of this research is to study the initial subsidence of the basin by analyzing the strati-graphic and structural features of the study area. This was accomplished through IHS Petra, Surf-er 13, and Win-Tensor software. Field work studies comprised a large part of this study. Also, a seismic profile and Google earth elevation profiles are among the methods used to study the initial subsidence of the Arkoma Basin. The study area within the basin represents a transitional zone from the shelf into the …

Compact Modeling Of Sic Insulated Gate Bipolar Transistors, Sonia Perez

Graduate Theses and Dissertations

This thesis presents a unified (n-channel and p-channel) silicon/silicon carbide Insulated Gate Bipolar Transistor (IGBT) compact model in both MAST and Verilog-A formats. Initially, the existing MAST model mobility equations were updated using recently referenced silicon carbide (SiC) data. The updated MAST model was then verified for each device tested. Specifically, the updated MAST model was verified for the following IGBT devices and operation temperatures: n-channel silicon at 25 ˚C and at 125 ˚C; n-channel SiC at 25 ˚C and at 175 ˚C; and p-channel SiC at 150 ˚C and at 250 ˚C. Verification was performed through capacitance, DC output …

The Role Of Organic Matter In The Fate And Transport Of Antibiotic Resistance, Metals, And Nutrients In The Karst Of Northwest Arkansas, Victor Lee Roland Ii

Graduate Theses and Dissertations

Organic matter (OM) in the environment acts as a nutrient, but may also act as a transport vector for harmful chemical compounds and bacteria. Acetate is a labile form of OM produced during fermentation in anaerobic lagoons used to store animal fecal-waste from concentrated animal feeding operations (CAFOs). Dry and liquid fertilizers from CAFOs pose a threat to groundwater by introducing excessive amounts of nutrients (e.g. OM, nitrate and ammonia), metals, and antibiotic compounds. In the epikarst of Northern Arkansas in the Buffalo River watershed additional input of labile dissolved organic carbon (DOC) from liquid CAFO waste-fertilizers was hypothesized to …

Essays On Optimization And Modeling Methods For Reliability And Reliability Growth, Thomas Paul Talafuse

Graduate Theses and Dissertations

This research proposes novel solution techniques in the realm of reliability and reliability growth. We first consider a redundancy allocation problem to design a system that maximizes the reliability of a complex series-parallel system comprised of components with deterministic reliability. We propose a new meta-heuristic, inspired by the behavior of bats hunting prey, to find component allocation and redundancy levels that provide optimal or near-optimal system reliability levels. Each component alternative has an associated cost and weight and the system is constrained by cost and weight factors. We allow for component mixing within a subsystem, with a pre-defined maximum level …

Photoluminescence Measurement On Low-Temperature Metal Modulation Epitaxy Grown Gan, Yang Wu

Graduate Theses and Dissertations

A low-temperature photoluminescence (PL) study was conducted on low-temperature metal modulation epitaxy (MME) grown GaN. By comparing the PL signal from high temperature grown GaN buffer layers, and MME grown cap layers on top of the buffer layers, it was found that MME grown GaN cap has a significantly greater defect-related emission. The band edge PL from MME grown GaN found to be 3.51eV at low temperature. The binding energy of the exciton in GaN is determined to be 21meV through temperature dependence analysis. A PL peak at 3.29eV was found in the luminescence of the MME grown cap layer, …

Modeling And Simulation Of 1700 V 8 A Genesic Superjunction Transistor, Staci E. Brooks

Graduate Theses and Dissertations

The first-ever 1.7kV 8A SiC physics-based compact SPICE model is developed for behavior prediction, modeling and simulation of the GeneSiC “Super” Junction Transistor. The model implements Gummel-Poon based equations and adds a quasi-saturation collector series resistance representation from a 1.2 kV, 6 A SiC bipolar junction transistor model developed in Hangzhou, China. The model has been validated with the GA08JT17-247 device data representing both static and dynamic characteristics from GeneSiC. Parameter extraction was performed in IC-CAP and results include plots showing output characteristics, capacitance versus voltage (C-V), and switching characteristics for 25 °C, 125 °C, and 175 °C temperatures.

Asbestos Cement Pipe Condition Assessment And Remaining Service Life Prediction, Abiy Melles Ghirmay

Graduate Theses and Dissertations

This research details a condition assessment of asbestos cement (AC) pipe within in the Bella Vista Village Property Owners Association water distribution system. Bella Vista Village contains appropriately 300 miles of AC pipe with nominal diameters from 6-14 inch. The goal of the research is to determine the current condition of AC pipe within the system and predict future performance of the pipes. AC pipe samples were obtained from 23 locations disturbed across the distribution system with nominal pipe diameters of 6-8 inch. Estimates of current level of degradation were obtained using phenolphthalein staining and hardness measurements of each sample. …

Incorporating A New Class Of Uncertainty In Disaster Relief Logistics Planning, Emre Kirac

Graduate Theses and Dissertations

In recent years, there has been a growing interest among emergency managers in using Social data in disaster response planning. However, the trustworthiness and reliability of posted information are two of the most significant concerns, because much of the user-generated data is initially not verified. Therefore, a key tradeoff exists for emergency managers when considering whether to incorporate Social data in disaster planning efforts. By considering Social data, a larger number of needs can be identified in a shorter amount of time, potentially enabling a faster response and satisfying a class of demand that might not otherwise be discovered. However, …

A Tabu Search, Augment-Merge Heuristic To Solve The Stochastic Location Arc Routing Problem, Tiffany L. Yang

Graduate Theses and Dissertations

The location arc routing problem (LARP) is a network optimization problem combining strategic facility location decisions and tactical or operational vehicle routing decisions for customer demand located on arcs of a network. The LARP seeks to locate facilities, or depots, and create vehicle delivery routes to minimize costs. The total cost is comprised of three components: fixed facility locations costs, fixed route creation (or vehicle acquisition) costs, and variable arc traversal costs. The applications of the LARP are varied and often include public services such as mail delivery, garbage collection, and street sweeping. In all of these applications, the magnitude …

Evaluation Of Poisson’S Ratio Of Asphalt Concrete, Elvis Alexander Castillo Camarena

Graduate Theses and Dissertations

Poisson´s ratio can be defined as the negative ratio of strains perpendicular to the load direction to the strains parallel to the loading direction. If elastic or viscoelastic models are used, Poisson´s ratio, together with elastic modulus, is a main input used to predict distresses in flexible pavement structures such as rutting and cracking. In asphalt concrete, Poisson’s ratio is commonly measured using two different testing configurations: indirect tension (IDT) and uniaxial. However, results from these two testing configuration can potentially have differences. Design methodologies such as the Mechanistic Empirical Design Guide (MEPDG, now PavementME) have been shown to be …

Nanofiltration Rejection Of Contaminants Of Emerging Concern From Municipal Water Resource Recovery Facility Secondary Effluents For Potable Reuse Applications, Steven Michael Jones

Graduate Theses and Dissertations

As reuse of municipal water resource recovery facility (WRRF) effluent becomes vital to augment diminishing fresh drinking water resources, concern exists that conventional barriers may prove deficient and the upcycling of contaminants of emerging concern (CECs) could prove harmful to human health and aquatic species if more effective and robust treatment barriers are not in place.

There are no federal Safe Drinking Water Act (SDWA) regulations in place specifically for direct potable reuse (DPR) of WRRF effluent. Out of necessity, some states are developing their own DPR reuse regulations. Currently, reverse osmosis (RO) is the default full advanced treatment (FAT) …

Quantification And Characterization Of Fracture Resistance In Asphalt Concrete Based On R-Curve Method, Shu Yang

Graduate Theses and Dissertations

The application of fracture energy is widely applied in the evaluation of cracking in the laboratory for asphalt concrete. However, this single number does not provide information on the characterization of the initiation and propagation of cracks. The Resistance Curve method, or R-Curve, is widely applied in characterizing various materials including, but not limited to, metal, polymer, rock, and composite. This research R-Curve method introduces asphalt concrete through a stepwise approach. First, in chapter one, there is a literature review of the history of fracture mechanics, fracture research in asphalt concrete, and an examination of the role of R-Curve application …

Investigation Of Optical Properties Of Zinc Oxide Photodetector, Tyler Chism

Graduate Theses and Dissertations

UV photodetection devices have many important applications for uses in biological detection, gas sensing, weaponry detection, fire detection, chemical analysis, and many others. Today’s photodetectors often utilize semiconductors such as GaAs to achieve high responsivity and sensitivity. Zinc oxide, unlike many other semiconductors, is cheap, abundant, non-toxic, and easy to grow different morphologies at the micro and nano scale. With the proliferation of these devices also comes the impending need to further study optics and photonics in relation to phononics and plasmonics, and the general principles underlying the interaction of photons with solid state matter and, specifically, semiconductors. For this …

Experimental And Computational Studies Of Cortical Neural Network Properties Through Signal Processing, Wesley Patrick Clawson

Graduate Theses and Dissertations

Previous studies, both theoretical and experimental, of network level dynamics in the cerebral cortex show evidence for a statistical phenomenon called criticality; a phenomenon originally studied in the context of phase transitions in physical systems and that is associated with favorable information processing in the context of the brain. The focus of this thesis is to expand upon past results with new experimentation and modeling to show a relationship between criticality and the ability to detect and discriminate sensory input. A line of theoretical work predicts maximal sensory discrimination as a functional benefit of criticality, which can then be characterized …

Validation Of A Confocal Light Sheet Microscope Using Push Broom Translation For Biomedical Applications, Joshua Hutcheson

Graduate Theses and Dissertations

There exists a need for research of optical methods capable of image cytometry suitable for point-of-care technology. To propose am optical approach with no moving parts for simplification of mechanical components for the further development of the technology to the poin-of-care, a linear sensor with push broom translation method. Push broom translation is a method of moving objects by the sensor for an extended field of view. A polydimethylsiloxane (PDMS) microfluidic chamber with a syringe pump was used to deliver objects by the sensor. The volumetric rate of the pump was correlated to the integration time of the sensor to …

Risk Estimation Toward A Natural History Model For Low Grade Glioma Patients, Anh Thi Hoang Pham

Graduate Theses and Dissertations

Glioma is a common type of primary brain tumor that represents 28% of all brain tumors and 80% of malignant tumors. According to a recent study by the Centers for Disease Control and Prevention (CDC), gliomas account for 53%, 35% and 29% of all brain tumors (68%, 74% and 81% of malignant brain tumors) among children (aged 0-14), teenagers (aged 15-19) and young adults, respectively. Gliomas are often diagnosed through radiological imaging and histopathology. There are two main groups of gliomas following World Health Organization’s classification: Low grade gliomas (LGG), or grade I and II gliomas; and high grade gliomas …

Genotoxicity Of Graphene In Escherichia Coli, Ananya Sharma

Graduate Theses and Dissertations

Rapid advances in nanotechnology necessitate assessment of the safety of nanomaterials in the resulting products and applications. One key nanomaterial attracting much interest in many areas of science and technology is graphene. Graphene is a one atom thick carbon allotrope arranged in a two-dimensional honeycomb lattice. In addition to being extremely thin, graphene has several extraordinary physical properties such as its exceptional mechanical strength, thermal stability, and high electrical conductivity. Graphene itself is relatively chemically inert and therefore pristine graphene must undergo a process called functionalization, which is combination of chemical and physical treatments that change the properties of graphene, …

Essays In Physicians Preference Items And Inventory Management Within The Healthcare Supply Chain, Mohammad A. Shbool

Graduate Theses and Dissertations

This work is composed of a number of topics in the healthcare area, which are approached separately with appropriate methodologies. The two topics deal with physician preference items via two different approaches. The first one investigates stock keeping unit (SKU) proliferation in healthcare organizations due to physician preference items (PPI). It captures perspectives of physicians and supply chain professionals about this problem through two surveys. The second topic builds a decision-making framework for the PPI selection process that can be used by healthcare organizations to make more objective decisions. A Multi-criteria decision making technique is implemented to illustrate the framework.

Correcting Current Imbalances In Three-Phase Four-Wire Distribution Systems, Vinson Joseph Jones

Graduate Theses and Dissertations

The objective of this thesis is to present the theory, design, construction, and testing of a proposed solution to unbalanced current loading on three-phase four-wire systems. The Unbalanced Current Static Compensator is the name of the prototype; herein referred to as the UCSC. The purpose of this prototype is to redistribute current between the three phases of a distribution system. Through this redistribution, negative- and zero-sequence currents are eliminated and a balanced system is seen upstream from the point of installation.

The UCSC consists of three separate single-phase H-bridge inverters that all share the same dc-link capacitor. Each of these …

Achieving A Better Balance Between Productivity And Performance On Fpgas Through Heterogeneous Extensible Multiprocessor Systems, Abazar Sadeghian

Graduate Theses and Dissertations

Field Programmable Gate Arrays (FPGAs) were first introduced circa 1980, and they held the promise of delivering performance levels associated with customized circuits, but with productivity levels more closely associated with software development. Achieving both performance and productivity objectives has been a long standing challenge problem for the reconfigurable computing community and remains unsolved today. On one hand, Vendor supplied design flows have tended towards achieving the high levels of performance through gate level customization, but at the cost of very low productivity. On the other hand, FPGA densities are following Moore's law and and can now support complete multiprocessor …

Cloning, Fed-Batch Expression And Purification Of A Novel Anti-Candida Peptide And Development Of A Cleavage Resistant Variant Of Green Fluorescence Protein, Rudra Palash Mukherjee

Graduate Theses and Dissertations

This work illustrates that the intelligent design of a bioprocess for the production of peptides of various length is possible by having a prior knowledge of desired product, cell line, fermentation conditions, and choices for downstream recovery. Cloning, expression, and recovery of a novel 12-mer anti-Candida peptide served as an illustrative case for a proposed Escherichia coli platform. The antifungal peptide, expressed as a fusion to GFPUV during high call density fed-batch, was recovered from cell lysate, concentrated using ion exchange chromatography, and finally cleaved with cyanogen bromide. The platform was capable of producing active peptide capable of arresting the …