Open Access. Powered by Scholars. Published by Universities.®

Engineering Commons

Open Access. Powered by Scholars. Published by Universities.®

Graduate Theses and Dissertations

Theses/Dissertations

2015

Discipline
Keyword

Articles 31 - 60 of 90

Full-Text Articles in Engineering

Value Focused Inland Waterway Infrastructure Investment Decisions, Othman Boudhoum Jul 2015

Value Focused Inland Waterway Infrastructure Investment Decisions, Othman Boudhoum

Graduate Theses and Dissertations

Maritime transportation functions as the backbone of world trade. The U.S. inland waterway transportation system is comprised of 12,000 miles of navigable waterways that connect and move freight between the global supply chain and thirty eight States. When investing in inland waterway infrastructure, we should aim to maximize all benefits associated with the investment including flood protection, water supply, hydropower generation, recreation, and environmental impact benefits. We formulate an initial qualitative value model for the inland waterway infrastructure investment decision based on a value-focused thinking approach which allows us to holistically evaluate project investment alternatives. Given limited resources, a portfolio …


An Empirical Water Quality And Best Management Practice Prioritization Model For Select Arkansas Watersheds, James Mccarty Jul 2015

An Empirical Water Quality And Best Management Practice Prioritization Model For Select Arkansas Watersheds, James Mccarty

Graduate Theses and Dissertations

The purpose of this study was to prioritize subwatersheds using water quality data and watershed characteristics. Water quality data was provided through studies by the Arkansas Natural Resources Commission, Beaver Water District, Arkansas Water Resources Center, and publicly available USGS gage data. A total of 114 sites across five HUC-8 watersheds were analyzed, including 12 USGS gages. Watershed characteristic data was retrieved from USGS and Arkansas GeoStore geodatabase repositories. A significant linear relationship between baseflow and stormflow nutrient concentrations was established allowing for the use of baseflow concentrations in the prioritization methodology. Pearson correlation, linear regression, classification and regression tree, …


Alkali Silica Reaction Mitigation Using High Volume Class C Fly Ash, William Joseph Phillips Jul 2015

Alkali Silica Reaction Mitigation Using High Volume Class C Fly Ash, William Joseph Phillips

Graduate Theses and Dissertations

Alkali-Silica Reaction (ASR) is a neutralization reaction that occurs between an acid (silicic acid) and a basic pH pore solution (Calcium Oxide, Potassium Oxide, and Sodium Oxide). ASR causes deleterious expansion within concrete, which can cause durability issues decreasing the life span of concrete. ASR in concrete has been found in increasing quantities since its discovery in 1940 by Stanton. Several cases of ASR have occurred in Arkansas near Fayetteville, Pine Bluff, and Little Rock. The purpose of this research was to develop preventative measures using Class C fly ash in concrete, which contains the moderately reactive aggregates found in …


A Cradle To Farm Gate Life Cycle Analysis Of Land Use In U.S. Pork Production, William Benjamin Putman Jul 2015

A Cradle To Farm Gate Life Cycle Analysis Of Land Use In U.S. Pork Production, William Benjamin Putman

Graduate Theses and Dissertations

The goal of this study was to conduct a detailed Life Cycle Assessment (LCA) of the U.S. live swine production supply chain to quantify land use requirements and to assess the impact associated with various ration compositions. The functional unit was defined as one kilogram (2.2 pounds) of live swine at the farm gate, ready for transport to the abattoir. This assessment focused on the three highest producing USDA regions, which encompassed the Midwest (Regions 5 and 7) and the Southeast (Region 4), representing 86% of U.S. market hog production.

First, a literature review was conducted to summarize the most …


Swelling-Etching Characterization Of Copper (I) Oxide - Pdms For The Development Of Micro/Nano - Particles Composite Mems Corrosion Sensor, Abdoul Kader Maiga Jul 2015

Swelling-Etching Characterization Of Copper (I) Oxide - Pdms For The Development Of Micro/Nano - Particles Composite Mems Corrosion Sensor, Abdoul Kader Maiga

Graduate Theses and Dissertations

The primary objective for this thesis is to contribute to the understanding of the oxide removal process for a corrosion sensing device. The goal for designing such a device is for monitoring corrosion on metallic structures. The sensing material (6.35mm x 1mm discs) of the device is composed of copper (I) oxide particles mixed in some polydimethylsiloxane (PDMS). The PDMS, “housing,” is meant for controlling the oxidation rate through the sensing material. A solvent was used to facilitate the etchant diffusion through the PDMS matrix. Toluene and acetic acid were the ideal solvent and etchant, respectively, for carrying out the …


Numerical Simulation Of Terahertz Wave Interaction With Breast Cancer Tumor Tissue Sections, Abayomi Omotola Omolewu Jul 2015

Numerical Simulation Of Terahertz Wave Interaction With Breast Cancer Tumor Tissue Sections, Abayomi Omotola Omolewu

Graduate Theses and Dissertations

This thesis presents numerical simulation of terahertz (THz) wave interaction with breast cancer tumor tissue sections. The obtained results are expressed in THz images of heterogeneous material that mimics the excised breast cancer tissue sections. The finite-element software package ANSYS High Frequency Structural Simulator (HFSS) was used in this work. HFSS is a full wave frequency domain three-dimensional (3D) electromagnetic simulation package. In this work, four breast cancer tissue models based on pathology images were simulated and images of the models were obtained at 1 THz. An incident Gaussian beam was raster scanned over tissue model configurations and the reflected …


Characterization Of Human Muscle Extracellular Matrix, Lauren Klaire Wilson Jul 2015

Characterization Of Human Muscle Extracellular Matrix, Lauren Klaire Wilson

Graduate Theses and Dissertations

The performance of extracellular matrix (ECM) biological scaffolds for the treatment of volumetric muscle loss (VML) has shown promising results with regenerating native muscle in animal models and human patients. However, the limitations of these scaffolds include non-specific characteristics based on the original parameters of the muscle that is lost and this is why our group chose to characterize human skeletal ECM. By understanding the characteristics of the native human skeletal ECM, more desired queues for the biological scaffolds being used to treat VML can be provided. Upper limb and lower limb skeletal muscles were commercially obtained, decellularized using common …


Design, Fabrication, And Measurement Of A Multiple-Input Multiple-Output (Mimo) Antenna For Mobile Communication, Christopher Charles Arnold Jul 2015

Design, Fabrication, And Measurement Of A Multiple-Input Multiple-Output (Mimo) Antenna For Mobile Communication, Christopher Charles Arnold

Graduate Theses and Dissertations

This thesis presents the design, fabrication and characterization of a multiband uniplanar MIMO antenna for hand-held mobile communication devices on LTE, WLAN, and WMAN networks. The antenna design methodology combined a variety of broadbanding techniques that resulted in a single-layer hybrid monopole antenna coupled to a meander line element and parasitic structures. The 115×55×1.54 mm antenna was fabricated using an FR4 composite material and occupies only a fractional volume within the size of an average cellular phone allowing ample space to integrate with existing hardware. Characterization of the MIMO antenna included input impedance, scattering parameters and radiation pattern cross sections …


Creating Quality Metrics For The Capital Facilities Delivery Industry, Kelsey D. Lamb Jul 2015

Creating Quality Metrics For The Capital Facilities Delivery Industry, Kelsey D. Lamb

Graduate Theses and Dissertations

A standard for industry-wide quality metrics, similar to safety metrics, for the capital facilities delivery industry is investigated and developed with the goal to motivate industry-wide adoption of this new quality metric program. A survey of the literature found key differences between capital facilities and other industries, mainly that other industries focus on the quality of the product while capital facilities focus on maintaining the cost and schedule of a project. Creating a framework that can be used across the industry can potentially lead to uniform improvement of quality for the entire industry. Quality is defined for the capital facilities …


Using Peptoids To Build Robust, Efficient Microarray Systems, Dhaval Sunil Shah Jul 2015

Using Peptoids To Build Robust, Efficient Microarray Systems, Dhaval Sunil Shah

Graduate Theses and Dissertations

Recent studies have shown microarrays to be indispensable for various biological applications, allowing for high-throughput processing and screening of biological samples such as RNA, DNA, proteins and peptides using a small sample volume (< 1 µL). Peptoids (poly-N-substituted glycine oligomers) can be used as a substitute for antibodies as capture molecules, as well as coatings for slides in antibody microarrays. The ease of synthesis of peptoids, high customizability with desired bioactivity, and speed of synthesis allows us to build a diagnostic system with a large dynamic range that can detect biomolecules from a minimal sample size. In this study, peptoid-based antibody mimics are designed to have both structural and functional features similar to those of antibodies, including a stable constant region (scaffolding) and a variable region for protein recognition. Peptoids previously screened via combinatorial library synthesis to be specific to bind Mdm-2 (mouse double minute 2 homolog) and GST (gluthathione S-transferase), have been synthesized. The protein recognition peptoids have been conjugated to PEG (polyethylene glycol) molecules with modified end groups; an amine group on one end that allows for immobilization and orientation on the slide, and an azide group on the other end that will allow for attachment to the peptoid through “click chemistry”. The number of capture molecules printed on the slides can be increased by making the available surface area of the slide larger via coating with microspheres. We have determined that partially water soluble peptoids that are also helical, can self-assemble into microspheres. Sequences have been developed that can consistently produce uniform microsphere coatings on slides that increase the overall surface area. A high surface area corresponds to a higher number of binding sites, and therefore a more sensitive system. The work done has shown that slides may be successfully coated in order to potentially improve the detection system.


The Effects Of Strain And Vacancies On The Electric And Vibrational Properties Of Ferroelectric Batio3 From First-Principles, Aldo Serge Michael Raeliarijaona Jul 2015

The Effects Of Strain And Vacancies On The Electric And Vibrational Properties Of Ferroelectric Batio3 From First-Principles, Aldo Serge Michael Raeliarijaona

Graduate Theses and Dissertations

The studies of ferroelectricity (FE) are of technological significance because of the multitude of applicable properties that ferroelectric materials exhibit. The mastery, and control of these properties necessitate the knowledge of the fundamental physics governing these insulating materials.

In this dissertation I present the results of first-principles investigations of the behavior of the fundamental ferroelectric properties under strain, and in the presence of vacancies. In the first part I introduce the important FE properties, their common behavior, and their numerous valuable applications. Following this background on FEs, a review of theoretical methods is presented with topics such as: Density Functional …


Reducing Multiple Access Interference In Broadband Multi-User Wireless Networks, Ali Nayef Alqatawneh Jul 2015

Reducing Multiple Access Interference In Broadband Multi-User Wireless Networks, Ali Nayef Alqatawneh

Graduate Theses and Dissertations

This dissertation is devoted to developing multiple access interference (MAI) reduction techniques for multi-carrier multi-user wireless communication networks.

In multi-carrier code division multiple access (MC-CDMA) systems, a full multipath diversity can be achieved by transmitting one symbol over multiple orthogonal subcarriers by means of spreading codes. However, in frequency selective fading channels, orthogonality among users can be destroyed leading to MAI. MAI represents the main obstacle to support large number of users in multi-user wireless systems. Consequently, MAI reduction becomes a main challenge when designing multi-carrier multi-user wireless networks. In this dissertation, first, we study MC-CDMA systems with different existing …


An Adaptive Large Neighborhood Search Heuristic For The Inventory Routing Problem With Time Windows, Mina Hadianniasar Jul 2015

An Adaptive Large Neighborhood Search Heuristic For The Inventory Routing Problem With Time Windows, Mina Hadianniasar

Graduate Theses and Dissertations

This research addresses an integrated distribution and inventory control problem which is faced by a large retail chain in the United States. In their current distribution network, a direct shipping policy is used to keep stores stocked with products. The shipping policy specifies that a dedicated trailer should be sent from the warehouse to a store when the trailer is full or after five business days, whichever comes first. Stores can only receive deliveries during a window of time (6 am to 6 pm). The retail chain is seeking more efficient alternatives to this policy, as measured by total transportation, …


Surface Modification Of Noble Metal Nanostructures Toward Biomedical Applications, Samir V. Jenkins Jul 2015

Surface Modification Of Noble Metal Nanostructures Toward Biomedical Applications, Samir V. Jenkins

Graduate Theses and Dissertations

Noble metal nanostructures have seen a steady increase in biomedical application over the last several decades; new diagnostic and therapeutic modalities are under intense investigation. Many of these applications are possible because of post-synthetic modifications to the particle surface. These modifications take a variety of forms and can significantly affect the pharmacokinetics of these particles. In this work, various surface modifications were investigated. Particle agglomeration, which occurs when particle surfaces remain in contact, can significantly affect the toxicity and efficacy of a nanomedicine. Darkfield microscopy and single-particle ICP-MS were developed as complementary methods to detect agglomeration in blood, with the …


A Computational Study Of The Potential For Lng Tanker Polystyrene Foam Insulation Failure Under Fire Exposure, Jeffrey David Martinez Jul 2015

A Computational Study Of The Potential For Lng Tanker Polystyrene Foam Insulation Failure Under Fire Exposure, Jeffrey David Martinez

Graduate Theses and Dissertations

Liquefied natural gas is shipped across the oceans in large marine carriers. The carriers house the LNG using several different insulation systems. One of these systems involves large aluminum spheres insulated with polystyrene foam. Polystyrene foam is very susceptible to heat degradation. This raised issues as to the extent of possible insulation failure caused by a large ship fire. Experiments were done investigating the nature of polystyrene’s thermal degradation, notably by Brauman, Chen, and Matzinger and Butler. A large scale investigation was also performed by Sandia National Laboratory. However, computational modeling of the degradation was lacking. This work set out …


Modeling Radiation Heat Transfer For Building’S Cooling And Heating Loads: Considering The Role Of Clear, Cloudy, And Dusty Conditions In Hot And Dry Climates, Salem Ahmed Algarni Jul 2015

Modeling Radiation Heat Transfer For Building’S Cooling And Heating Loads: Considering The Role Of Clear, Cloudy, And Dusty Conditions In Hot And Dry Climates, Salem Ahmed Algarni

Graduate Theses and Dissertations

The influence of transient factors such as sky long wave radiation exchange and atmospheric aerosols (i.e., smog, and dust – made up of sand, clay, and silt) are not carefully considered in current building design and simulation models. Therefore, the research objective was to better understand and account for such variables, resulting in improved radiative predictive capabilities, especially important for hot and dry climates under different sky conditions including clean, cloudy, and dusty. Overall, results of this dissertation provided a better prediction method for sky long wave radiation exchange with a building’s roof and the impact of dust accumulation on …


Text-Independent Speaker Identification Using Statistical Learning, Alli Ayoola Ojutiku Jul 2015

Text-Independent Speaker Identification Using Statistical Learning, Alli Ayoola Ojutiku

Graduate Theses and Dissertations

The proliferation of voice-activated devices and systems and over-the-phone bank transactions has made our daily affairs much easier in recent times. The ease that these systems offer also call for a need for them to be fail-safe against impersonators. Due to the sensitive information that might be shred on these systems, it is imperative that security be an utmost concern during the development stages. Vital systems like these should incorporate a functionality of discriminating between the actual speaker and impersonators. That functionality is the focus of this thesis.

Several methods have been proposed to be used to achieve this system …


Adaptive Controller Using Runtime Partial Hardware Reconfiguration For Unmanned Aerial Vehicles (Uavs), Nikhil Thomas Jul 2015

Adaptive Controller Using Runtime Partial Hardware Reconfiguration For Unmanned Aerial Vehicles (Uavs), Nikhil Thomas

Graduate Theses and Dissertations

The goal of this thesis is to explore the feasibility of a multirotor controller system which can dynamically change the arm configuration of a multirotor. Currently most of the multirotor systems have to be powered down, rewired, and programmed with new firmware, to configure how many arms/motors they use to fly. The focus of our effort is to develop a Field Programmable Gate Array (FPGA) based hardware/software controller which uses dynamic partial hardware reconfiguration to switch the arm/motor configuration of a multirotor during operation. We believe that this will make a multirotor more fault tolerant and adaptive. This thesis explains …


Peptoid-Based Klvff Mimics: A Unique Approach To Alzheimer's Disease, James Phillip Turner Jul 2015

Peptoid-Based Klvff Mimics: A Unique Approach To Alzheimer's Disease, James Phillip Turner

Graduate Theses and Dissertations

Alzheimer’s disease (AD) is the leading form of dementia worldwide. AD patients experience a slow, gradual cognitive decline that includes loss of memory and behavioral stability as the disease progresses. Surprisingly, AD is the sixth leading cause of death in the United States and has had a profound impact on the U.S. economy. Though there are medications to help improve the quality of life of diagnosed patients for a period of time, there is still no cure for AD. AD is characterized by the build-up of amyloid plaques that develop from the aggregation of the amyloid beta protein (Aβ) in …


Synthesis Of Palladium And Palladium-Copper Nanostructures As Electrocatalysts, Haibin Wu Jul 2015

Synthesis Of Palladium And Palladium-Copper Nanostructures As Electrocatalysts, Haibin Wu

Graduate Theses and Dissertations

Pd and its alloys are alternatives of Pt as promising catalysts and electrocatalysts for many reactions. Size controlled synthesis of nanoparticles remains a major research subject, since smaller size particles show better catalytic performance. In this work, we developed a modified chemical wet method to prepare Pd and Pd-Cu nanostructures with uniform small size. Different sizes and shapes of Pd nanostructures were successfully synthesized by using the two reducing agents (i.e., L-ascorbyl-6-palmitate or phenylphosphinic acid). The reducing agents play a role to control the final morphologies and sizes of particles. The use of L-ascorbyl-6-palmitate favors to form irregular branch shapes …


Fabrication Of Sub-10 Nm Metallic Structures Via Nanomasking Technique For Plasmonic Enhancement Applications, Stephen Joseph Bauman Jul 2015

Fabrication Of Sub-10 Nm Metallic Structures Via Nanomasking Technique For Plasmonic Enhancement Applications, Stephen Joseph Bauman

Graduate Theses and Dissertations

One area of nanoscience that has become popular in recent years is the study of optics at the nanoscale. Due to enhanced fabrication techniques, new geometries and improved dimensional resolutions have been allowing the creation of nanostructures for use in this area. Nanoscale geometries cause unique optical effects such as enhancement of the signal’s electric field strength at the surface of a substrate. Specifically, structures separated by nanogaps (10 nm and smaller) have been shown to exhibit strong field enhancement within the gaps. This has opened up the potential for surface enhanced spectroscopies, enhanced absorption for photovoltaics, and improved sensing …


Broadband High Efficiency Fractal-Like And Diverse Geometry Silicon Nanowire Arrays For Photovoltaic Applications, Omar Hassan Al-Zoubi Jul 2015

Broadband High Efficiency Fractal-Like And Diverse Geometry Silicon Nanowire Arrays For Photovoltaic Applications, Omar Hassan Al-Zoubi

Graduate Theses and Dissertations

Solar energy has many advantages over conventional sources of energy. It is abundant, clean and sustainable. One way to convert solar energy directly into electrical energy is by using the photovoltaic solar cells (PVSC). Despite PVSC are becoming economically competitive, they still have high cost and low light to electricity conversion efficiency. Therefore, increasing the efficiency and reducing the cost are key elements for producing economically more competitive PVSC that would have significant impact on energy market and saving environment. A significant percentage of the PVSC cost is due to the materials cost. For that, thin films PVSC have been …


Automatic User Profile Construction For A Personalized News Recommender System Using Twitter, Shiva Theja Reddy Gopidi Jul 2015

Automatic User Profile Construction For A Personalized News Recommender System Using Twitter, Shiva Theja Reddy Gopidi

Graduate Theses and Dissertations

Modern society has now grown accustomed to reading online or digital news. However, the huge corpus of information available online poses a challenge to users when trying to find relevant articles. A hybrid system “Personalized News Recommender Using Twitter’ has been developed to recommend articles to a user based on the popularity of the articles and also the profile of the user. The hybrid system is a fusion of a collaborative recommender system developed using tweets from the “Twitter” public timeline and a content recommender system based the user’s past interests summarized in their conceptual user profile. In previous work, …


Traction-Separation Relationships For Hydrogen-Induced Grain Boundary Embrittlement In Nickel Via Molecular Dynamics Simulations, Wesley Allen Barrows Jul 2015

Traction-Separation Relationships For Hydrogen-Induced Grain Boundary Embrittlement In Nickel Via Molecular Dynamics Simulations, Wesley Allen Barrows

Graduate Theses and Dissertations

The deleterious effects of atomic and molecular hydrogen on the mechanical properties of metals have long been observed. Although several theories exist describing the mechanisms by which hydrogen negatively influences the failure of materials, a consensus has yet to be reached regarding the exact mechanism or combination of mechanisms. Two mechanisms have gained support in explaining hydrogen’s degradative role in non-hydride forming metals: hydrogen-enhanced localized plasticity and hydrogen-enhanced decohesion. Yet, the interplay between these mechanisms and microstructure in metallic materials has not been explained. Accordingly, for this thesis, the three main objectives are: (i) to develop a numerical methodology to …


Development And Characterization Of Intermediate-Band Quantum Wire Solar Cells, Colin Stuart Furrow Jul 2015

Development And Characterization Of Intermediate-Band Quantum Wire Solar Cells, Colin Stuart Furrow

Graduate Theses and Dissertations

The effects of a quantum wire intermediate band, grown by molecular beam epitaxy, on the optical and electrical properties of solar cells are reported. To investigate the behavior of the intermediate band, the quantum wires were remotely doped at three different doping concentrations, the number of quantum wire layers was varied from three to twenty, and the solar cell structure was optimized. For all the structures, current-voltage and external quantum efficiency measurements were performed to examine the effect of absorption and power conversion of the intermediate band solar cell (IBSC). Time-resolved photoluminescence measurements showed that δ-doping can increase the lifetime …


Understanding Technology Diffusion And Spatial Accessibility In The Home Healthcare Industry, Mehmet Serdar Kilinç Jul 2015

Understanding Technology Diffusion And Spatial Accessibility In The Home Healthcare Industry, Mehmet Serdar Kilinç

Graduate Theses and Dissertations

Home healthcare is becoming an important alternative to institutionalized care. It not only reduces costs but also increases health outcomes and patient satisfaction. However, the availability and efficiency of home healthcare services need to be improved as the aging population increases in the US. Hence, understanding home healthcare utilization and access are the essential steps to develop strategies ensuring effective and sustainable services to patients.

This research aims to study two main issues in the US home healthcare system: diffusion and long-term impacts of home telehealth and potential spatial accessibility of home healthcare services. Home telehealth is a promising technology …


Novel Separation Methods Using Electrodialysis/Electrodeionization For Product Recovery And Power Generation, Alexander Miguel Lopez-Rosa May 2015

Novel Separation Methods Using Electrodialysis/Electrodeionization For Product Recovery And Power Generation, Alexander Miguel Lopez-Rosa

Graduate Theses and Dissertations

The use of electrodialytic separations for the purification of products has been a vital technique for the past 50 years in the chemical industry. Originally used for demineralization and desalination, electrodialysis and its counterparts have expanded to assist in product purification, waste and hazard removal, and power generation. This research focused on the development of high purity organic acids purification with low power requirements. Work resulted in the development of a new type of electrodialysis process, specifically the use of ionic liquids as a secondary solvent for the development of dual solvent electrodialysis. Through dual solvent electrodialysis, ions were recovered …


Inventory Management And Control "For A Cause", John Michael Miller May 2015

Inventory Management And Control "For A Cause", John Michael Miller

Graduate Theses and Dissertations

Companies today are changing the culture of business and beginning to involve more than just labor and money in overall decisions. Just as sustainability issues and humanitarian logistics are gaining popularity, so is the idea of using business to make a difference on society in addition to making a profit. As companies position themselves across the globe to make an impact, they employ people in third-world environments that create uncertainties on both the supply and demand sides. Also, the idea of strategically planning work with the goal of minimizing costs has been replaced by companies wanting to give more work …


Characterization Of Nano-Porous Si-Cu Composites To Enhance Lubricant Retention Impacting The Tribological Properties Of Sliding Surfaces, Julius Sheldon Morehead May 2015

Characterization Of Nano-Porous Si-Cu Composites To Enhance Lubricant Retention Impacting The Tribological Properties Of Sliding Surfaces, Julius Sheldon Morehead

Graduate Theses and Dissertations

As the expectations for modern machinery's tribological and thermal performances continue to rise, the retention of lubricant on the contact surfaces of their sliding components becomes an increasingly important issue. Friction and wear cause heat-related failures which lead to catastrophic damage to machinery. Evaporation of a lubricant's volatile constituents as well as lubricant migration leads not only to a reduction in lubricant quantity but also in its quality, thus facilitating component failures. In order to enhance component reliability, the surface should incorporate features that actively retain lubricants. The unique properties of nano-porous topographies such as their high surface area-to-volume ratio …


Transformation Of Swine Manure And Algal Consortia To Value-Added Products, Mahmoud A. Sharara May 2015

Transformation Of Swine Manure And Algal Consortia To Value-Added Products, Mahmoud A. Sharara

Graduate Theses and Dissertations

The swine production sector is projected to grow globally. In the past, this growth manifested itself in increased herd sizes and geographically concentrated production. Although economically sound, these trends had negative consequences on surrounding ecosystems. Over-application of manure resulted in water quality degradation, while long-term storage of manure slurries was found to promote release of potent GHG emissions. There is a need for innovative approaches for swine manure management that are compatible with current scales of production, and increasingly strict environmental regulations.

This study aims to investigate the potential for incorporating gasification as part of a novel swine manure management …