Engineering Commons^™

In Mold Flow Of Long Fibers In Compression Molding Process, Gleb Meirson

Electronic Thesis and Dissertation Repository

Long Fiber Thermoplastics (LFT) are promising new materials with high physical properties and low density. These high properties are obtained by embedding very long fibers (~100 mm) into a thermoplastic matrix. Such a high fiber length dictates the use of a compression molding process for manufacturing as the length of discontinuous fibers in injection molding is limited by pellet length.

LFT composites are of great interest for the automotive industry. These materials are already used in some interior and exterior car parts such as bumpers, seat structures, door module etc. This research is inspired by the desire to manufacture load …

Controlled Delivery Of Angiogenic And Arteriogenic Growth Factors From Biodegradable Poly(Ester Amide) Electrospun Fibers For Therapeutic Angiogenesis, Somiraa S. Said

Electronic Thesis and Dissertation Repository

Therapeutic angiogenesis relies on the delivery of exogenous growth factors to stimulate neovessel formation. However, systemic administration of angiogenic factors results in rapid clearance from the site of interest due to their short biological half-life. In this work, we are reporting controlled delivery of a ‘cocktail’ of growth factors, an angiogenic factor −fibroblast growth factor-2 (FGF2), and an arteriogenic factor −fibroblast growth factor-9 (FGF9), from biodegradable poly(ester amide) (PEA) electrospun fibers towards targeting neovascular formation and maturation. FGF2 and FGF9 were dual loaded into PEA fibers using a mixed blend and emulsion electrospinning technique. Matrigel tube formation and Boyden chamber …

Fractionation Of Cornstalk Into Cellulose And Lignin For The Production Of Sodium Carboxymethyl Cellulose, Tao Shui

Electronic Thesis and Dissertation Repository

This thesis project aimed to fractionate cornstalk into cellulose and lignin, and utilize the crude cornstalk-derived cellulose for the production of sodium carboxymethyl cellulose and the lignin for the sybthesis of bio-based phenol-formaldehyde resole resins as wood adhesives. In this thesis work, cornstalk was efficiently fractionated into crude cellulose and crude lignin in mixed solvents of acetic acid, formic acid and water at a solid/agent ratio of 1:5 (g/mL) at 80-100 °C for 120-240 min. The best conditions for organosolv fractionation of cornstalk among the test conditions were determined as follows: mixed solvent of acetic acid/formic acid/water (3:6:1, v/v/v), HCl …

Studies On Nanocomposite Coating Produced By Laser-Assisted Process To Prevent Silicone Hydrogels From Bio-Fouling, Vishnuvardhana Wuppaladhodi

Electronic Thesis and Dissertation Repository

In this thesis, silver nanoparticles incorporated into polyvinylpyrrolidone (PVP) were deposited on silicone hydrogel to improve the hydrophilicity of the silicone hydrogel and prevent the growth of bacteria. Two different processes were employed to produce Ag nanoparticles: (1) Process-A is a photochemical reduction; (2) Process-B is laser ablation in liquid. Following that, MAPLE process was employed to deposit the Ag-PVP nanocomposites on the surface of silicone hydrogel. A solid-state pulsed laser (Nd:YAG) with a wavelength of 532 nm at a fluence of 50.4 mJ/cm² was used in the MAPLE system to deposit Ag-PVP nanocomposite coating. Our results indicate that …

Production Of Bio-Based Phenol Formaldehyde Foams, Bing Li

Electronic Thesis and Dissertation Repository

Considering the declining non-renewable fossil resources, there is increasing interest in the development of more environmentally conscious, sustainable and cost-effective substitutes for chemical production. Lignin, a main component in lignocellulosic biomass, has been considered to be a potential substitute for petroleum-based phenol due to its phenolic structure.

This PhD dissertation aimed at producing bio-based phenol formaldehyde (BPF) foams using bio-phenols, including but not limited to, kraft lignin (KL), organosolv lignin (OL), hydrolysis lignin (HL), and bio-crude oil from white birth bark. The challenge of the existing process of producing BPF foams is that a low phenol substitution ratio, generally less …

Polymer System And Molding Techniques For Surgical Training Models, Daniel J. Park

Electronic Thesis and Dissertation Repository

Poly(vinyl alcohol) (PVA) hydrogels are used to produce high fidelity models for surgical training applications. PVA hydrogel mechanical properties are developed through the use of a freeze-thaw cycling, physical crosslinking process. The resulting gels exhibit a non-linear elastic modulus which can be tailored to match many tissues of the human body.

Methods for joining PVA hydrogels were investigated to aid in the production of complicated structures that would be difficult to produce in a single step. Bond strength of PVA gels was characterized using a modified peel test. The porosity and degree of crosslinking of the PVA substrate were investigated …

Engineered Quantum Dots For Eva Nanocomposite Films And Tio2 Photocatalysts, Md Abdul Mumin

Electronic Thesis and Dissertation Repository

Light absorbing inorganic nanoparticles in transparent plastics such as poly(ethylene-co-vinyl acetate) (EVA) are of enormous interest in emerging solar materials, including photovoltaic (PV) modules and commercial greenhouse films. Quantum dots (QDs) have the potential to absorb UV light and selectively emit visible light. However, how to stabilize the QDs for long product life spans without "blinking" while enabling their easy integration into polymer systems is lacking. This work examines different approaches for loading mesoporous silica encapsulated QDs into EVA polymer films which can control plant growth in greenhouses or enhance PV panel efficiencies.

Highly luminescent CdS and CdS-ZnS core-shell QDs …

Design And Implementation Of Multi-Responsive Azobenzene Triggers In Self-Immolative And Degradable Polymers, Andrew D. Wong

Electronic Thesis and Dissertation Repository

Self-immolative polymers are a recently developed class of degradable polymers capable of undergoing end-to-end depolymerization following the reaction of their endcaps with appropriate stimuli. Self-immolative materials originated in the field of prodrug chemistry, and evolved into self-immolative oligomers, dendrimers, and most recently, linear polymers. Many stimuli-responsive endcaps have been developed, but typically can only respond to one stimulus. Azobenzenes are a well-known class of stimuli-responsive molecules most commonly used as photoswitches, due to their facile trans-cis isomerization. In addition to their photochemistry, azobenzenes have recently been found to be selectively reduction-sensitive, and are therefore of interest as endcaps …

Investigation And Modeling Of Dip-Coating Process For Dispersions, Mahyar Javidi Soufiani

Electronic Thesis and Dissertation Repository

Dip coating of liquid film deposition on cylindrical substrates is studied using mathematical modeling, numerical simulation and experimental investigation. A mathematical model based on the Landau-Levich approach for dip coating has been developed using the Ellis constitutive equation, for cylindrical geometries, to analyze the effects on the coating thickness of the substrate radius and hydrodynamic behavior for a non-Newtonian fluid. The influence of the viscosity at low shear rates near the surface of the withdrawal film is included in the Ellis model and coating thickness results for Ellis, power law and Newtonian models are compared with experimental data. Good agreement …