Engineering Commons^™

Effect Of Process Parameters On The Mechanical Properties Of Carbon Fiber Epoxy Composites By Wet Compression Molding, Saboora Ayatollahi

Electronic Thesis and Dissertation Repository

In recent years, due to growing environmental concerns, composite materials have emerged as a promising lightweight alternative for metals in structural applications in automobiles. Among composite manufacturing processes, Wet Compression Molding (WCM) is a new method of producing Carbon Fiber Reinforced Polymer (CFRP) components. For similar processes like RTM, operating conditions are always one of the factors that impact the mechanical performance of CFRP parts. Thus, this thesis aimed to investigate the effects of operating conditions, including resin temperature, mold temperature, resin set time, gap closure speed, and mold curing time on the mechanical property of the composite parts. In …

The Electrical, Thermal, And Morphological Properties Of Microinjection-Molded Polypropylene Nanocomposites, Renze Jiang

Electronic Thesis and Dissertation Repository

Microinjection molding (µIM) exhibits significantly higher shear rates and faster cooling rates, as compared to conventional injection molding, which affect the characteristics of its final products. The effect of carbon black (CB), carbon nanotubes (CNT), and graphene nanoplatelet (GNP) fillers on the electrical conductivity properties of microinjection-molded polypropylene (PP) nanocomposites was systematically studied. Results showed the electrical conductivity properties of PP/CNT and PP/CB microparts were significantly influenced by mold geometry. PP/CNT/CB hybrid filler microparts demonstrated synergistic increases in electrical conductivity and crystallization temperature with higher CNT loading. Morphological observations indicated significant CB and CNT phase separation. Powder-PP/GNP composites exhibited higher …

Sol-Gel Derived Bioceramic Poly(Diethyl Fumarate – Co – Triethoxyvinylsilane) Composite, Aref Sleiman

Electronic Thesis and Dissertation Repository

Synthetic bone graft materials have become an increasingly popular choice for bone augmentation. Ceramic-based and polymer-based bone graft materials constitute the two main classes of synthetic bone graft materials. This study investigated the synthesis of novel bioactive composites for their potential use as bone graft biomaterials. Poly(diethyl fumarate-co-triethoxyvinylsilane)/bioceramic class II organic/inorganic hybrid biomaterials were synthesized via a sol gel process. These biomaterials were then reacted with an ammonium phosphate solution to prepare their respective composites. For the first time, we successfully synthesized sol-gel derived bioceramic poly(diethyl fumarate-co-triethoxyvinylsilane) composites. In vitro bioactivity evaluation of poly(diethyl fumarate-co-triethoxyvinylsilane)/bioceramic composites in simulated body fluid …

Thermochemical Conversion Of Plastic To Value Added Products, Anastasia L. Maslak

Electronic Thesis and Dissertation Repository

In this study, the use of pyrolytic cracking for managing non-recyclable plastic waste by conversion into value-added liquid and gaseous products was investigated. A single-stage reactor and a novel, two-stage reactor set-up were used for experiments involving polyethylene and polypropylene. Parameters including feedstock composition, feed rate, temperature and residence time were studied. The two-stage approach was investigated to overcome existing transportation limitations involved in the typical plastic waste lifecycle. Bulky plastic collected in towns and cities must be transported to industrial facilities typically located elsewhere for reprocessing. Both HDPE and LDPE showed promising results for olefin recovery with ethylene gas …

Inherently Porous Atomically Thin Membranes For Gas Separation, Harpreet Atwal

Electronic Thesis and Dissertation Repository

Membranes made from atomically thin materials promise hundreds of times higher production rates than conventional polymer membranes for separation applications. Graphene is impermeable to gases but becomes selectively permeable once pores are introduced into it but creating trillions of nanopores over large areas is difficult. By instead choosing an inherently porous two-dimensional material with naturally identical pores repeated at high density, we may circumvent this challenge. In this work, we explore the potential of two candidate materials, 2D polyphenylene and graphdiyne. We synthesize cyclohexane-m-phenylene, a monomer of 2D polyphenylene. We then develop an atomic force microscopy technique for measuring the …

Catechol-Containing Copolymers As An Active Ingredient For Denture Adhesives, Vincent Ying Wun Kong

Electronic Thesis and Dissertation Repository

Moisture inside the mouth adds challenge to making denture adhesives formulations. Some formulations have zinc to enhance adhesion on wet skin despite knowing the health hazards. Inspired by mussel foot proteins’ catechol unit’s strong underwater adhesion, nine catechol-containing copolymers (P1A-P3C) were synthesized by free radical polymerization of 3,4-dimethoxystyrene (3,4- DMS) with different styrene derivatives followed by deprotection. P1A-P3C were used to make Fn(P)-C-PBS denture adhesive formulations which had suitable shear stresses around ≥ 5 kPa satisfying ISO 10873. In-situ NMR studies of free radical polymerization of 3,4 - DMS and styrene derivatives allowed computation of their reactivity ratios showing all …

Design, Fabrication And Applications Of Efficient Conductive Polymers For Photocatalytic Antimicrobials, Chunbo Liu

Electronic Thesis and Dissertation Repository

Designing new antimicrobial surfaces which are effective under visible light irradiation without leaching toxic ions is a current challenge for effective disinfection. A new polymeric system poly[2,11’-thiophene-ethylene-thiophene-alt-2,5-(3-carboxyl) -thiophene] (PTET-T- COOH) with broad light absorption was synthesized. Its photocatalytic disinfection performance against staphylococcus aureus (S. aureus) and streptococcus suis (S. suis) was evaluated, showing over 99.999% inactivation (higher than 5-log inactivation) in 2 h for both bacteria, under visible light irradiation at a low concentration of PTET-T-COOH (0.1 mg/mL). In addition, a PTET-T-COOH/polyurethane (PU) polymeric coating was designed and fabricated. Chemical attachment was confirmed between PTET-T-COOH and PU using various thermophysical …

Light Downshifting Zinc Oxide-Ethylene Vinyl Acetate Nanocomposite Greenhouse Films, David V. Hiscott

Electronic Thesis and Dissertation Repository

One method to increase the productivity of greenhouse agriculture is to increase the amount of photosynthetically available light within. This was accomplished through the use of nanocomposite greenhouse film comprised of light downshifting zinc oxide quantum dots and ethylene vinyl acetate copolymer. As this material will be used on a commodity scale, two different approaches – a large batch process and continuous plug flow reactor – were designed for mass production of zinc oxide. A design of experiment was performed to determine which synthesis parameters contribute more strongly to the quantum dot’s growth. This was done for a small-scale batch …

Synthesis Of Vo2/Poly(Mma-Co-Dmemuabr) Antimicrobial/Thermochromic Dual-Functional Coating And Reactivity Ratios Study, Yixian Liu

Electronic Thesis and Dissertation Repository

Antimicrobial/thermochromic dual-functional coatings were successfully synthesized via UV-curing. The quaternary ammonium compound (QAC) N,N-dimethyl-N-{2-[(2-methylprop-2-enoyl)oxy]ethyl}undecane-1-aminium bromide (dMEMUABr) was synthesized and copolymerized with methyl methacrylate (MMA) for antimicrobial properties. Vanadium oxide (VO₂) nanoparticles were evenly dispersed within the coating, providing thermochromic properties. The dual-functional coating showed high luminous transmittance (T_lum(25°C) =36.1 %) and solar energy modulation ( T_sol=5.8 %). 90.3 % of bacteria reduction was observed against Escherichia coli within 24 h contact. To further understand the sequence distribution of the copolymer poly(MMA-co-dMEMUABr), the reactivity ratios of MMA and dMEMUABr monomer were studied and compared under thermal …

Progress Toward Durable Icephobic Materials, Matthew J. Coady

Electronic Thesis and Dissertation Repository

Ice accumulation is a major engineering challenge in many fields including aerospace, power generation, transportation, and infrastructure. A variety of solutions are being researched to address this challenge. Perhaps the most promising method of combating ice accumulation is by applying coatings with low values of interfacial ice adhesion strength, τ_ice. Icephobic materials are those with ice adhesion below 100 kPa, and it has been shown that passive delamination can occur on surfaces with τ_ice below 20 kPa. While various low adhesion surfaces have been prepared, durability concerns pervade applications where surfaces experience repeated icing or freeze-thaw cycles, …

Enhanced Carbon Fiber-Epoxy Composites For Rowing Racing Shells, Rayehe Samimi

Electronic Thesis and Dissertation Repository

This thesis investigates the thermomechanical properties of two commercial composites using carbon fiber reinforcement in epoxy resins for manufacturing marine based rowing racing shells. The main goal of this project was to investigate how to control the resin properties and curing temperatures to improve the final product properties including adhesion, toughness modulus and tensile strength. Moreover, an efficient curing process was required by our supporting company to be used at low temperatures to enhance the curing characteristics and to provide improved mechanical properties. Accordingly, the current research tries to improve the manufacturing curing process and build up high performance structure …

A Ph-Sensitive Delivery System For The Prevention Of Dental Caries Using Salivary Proteins, Yi Zhu

Electronic Thesis and Dissertation Repository

Dental caries remains one of the most common chronic diseases worldwide. Salivary proteins such as histatins have demonstrated biological functions directly related to tooth homeostasis and prevention of dental caries. However, histatins are susceptible to the high proteolytic activities in the oral environment. Therefore, pH-sensitive chitosan nanoparticles (CNs) have been proposed as potential carriers to target major oral diseases that occur under acidic conditions (e.g. dental caries and dental erosion). Four different types of chitosan polymers were investigated and the optimized CNs successfully loaded histatin 3 and released it selectively under acidic conditions. Through loading the survival time of histatin …

Chemical Modification Of Lignin Into Advanced Materials, Soheil Hajirahimkhan

Electronic Thesis and Dissertation Repository

Fossil fuel resources are being used today for most of humankind’s energy and chemical/material needs. The inevitable demise of these resources has created significant interest in the field of biomass and particularly, lignin valorization. As the world’s second most abundant polymer, more than 98% of the annually produced lignin is under-utilized either as an on-site heat source, or as landfill. Thus, finding practical approaches to modifying this inexpensive sustainable resource into materials of high value can be the next leap in lessening the dependence on fossil fuel resources and thus, developing a sustainable future.

In this thesis, kraft lignin is …

Plant Stimuli-Responsive Biodegradable Polymers For The Use In Timed Release Fertilizer Coatings, Spencer Heuchan

Electronic Thesis and Dissertation Repository

The use of nitrogen-based fertilizers continues to accelerate with human population growth and increases in global food requirements. Enhanced efficiency fertilizers (EEFs) have been developed to improve the synchronization between nutrient supply and crop nutrient demand. However, many of the current controlled release fertilizers are coated with non-degradable polymers that contribute to accumulation of microplastics within ecosystems. This thesis describes research towards the development of a new class of fertilizer coatings using a self-immolative polymer known as poly (ethyl glyoxylate) (PEtG). PEtG itself does not have suitable properties to produce a viable coating but once blended with another degradable polyester …

Direct Sheet Molding Compound Process (D-Smc), Atieh Motaghi

Electronic Thesis and Dissertation Repository

The combination of highly crosslinked resin and long glass fiber reinforcement in direct sheet molding compound (D-SMC) provides the parts with high physical properties and low density suitable for large interior and exterior automotive applications. Different stages of D-SMC process including maturation zone and compression molding are studied using mathematical analysis, numerical simulation and experimental investigations.

An analytical analysis is used to calculate the pressure and velocity in the first section of maturation zone and then the permeability of fiber bundle is calculated by simulation and the agreement between the available empirical equation and simulation was obtained. The flow is …

Adaption Of Catechol And Reversible Addition-Fragmentation Chain-Transfer (Raft) Chemistries For Water-Based Applications, Olabode Oyeneye

Electronic Thesis and Dissertation Repository

Incorporating the binding chemistry of catechol functionality with RAFT chemistry offers a facile and simplified approach for developing a suite of new 2D and 3D hybrid materials with tailored morphologies. Leveraging both chemistries by synthesizing catechol-end functionalized RAFT agents and catechol-containing monomeric species for RAFT (co)polymerization, this dissertation examined a new series of advanced materials that were designed for water-based applications including model flocculants, thermoresponsive hydrogels, adsorbents and underwater adhesives.

To prepare the RAFT agents, novel trithiocarbonates with several catechol end R groups (as postpolymerization anchors) were synthesized that differ in their carbonyl α-substituents (Dopa-CTAs). These materials were evaluated for …

Photoactive Properties Of Nanostructured Titania Modified Polyurethanes, Chao Chen

Electronic Thesis and Dissertation Repository

In order to enhance both the photoactivity and physical/mechanical properties of titania/polyurethane (PU) nanocomposites, in-situ polymerization and film casting were investigated. Both self-degrading PU foams and self-cleaning PU coatings were prepared. Functional monomers were prepared usingDMPA (2,2-dimethylolpropionic acid) functionalized anatse TiO₂ and P25 for integration into polyurethane foam with a "grafting-from" synthetic method. This technique was found to successfully reduce the agglomeration effect of titania nanoparticles inside the foams. In addition, the photodegradation rate was enhanced by > 120% over unmodified foam at an optimized loading of 3wt% DMPA functionalized anatase TiO₂. The presence of DMPA functionalized P25 …

Modifications To Acm Classifier And Fine Powder Coating For Plastic Components, Xinping Zhu

Electronic Thesis and Dissertation Repository

Powder coating is a dry coating technology, which has several advantages over conventional liquid coatings. However, wider applications were limited by its inferior surface finish and increased film thickness. Making powder finer (fine powder technology) can provide much better surface appearance and smaller film thickness comparable to liquid coating, but it’s much more difficult to produce fine powder products with narrow particle size distributions than coarse powder. Another issue that restricts the applications is its electrostatic spraying method, which limits the applications mainly to be with conductive substrates, like metals.

In this study, to ensure a narrow particle size distribution …

In Mold Flow Of Long Fibers In Compression Molding Process, Gleb Meirson

Electronic Thesis and Dissertation Repository

Long Fiber Thermoplastics (LFT) are promising new materials with high physical properties and low density. These high properties are obtained by embedding very long fibers (~100 mm) into a thermoplastic matrix. Such a high fiber length dictates the use of a compression molding process for manufacturing as the length of discontinuous fibers in injection molding is limited by pellet length.

LFT composites are of great interest for the automotive industry. These materials are already used in some interior and exterior car parts such as bumpers, seat structures, door module etc. This research is inspired by the desire to manufacture load …

Controlled Delivery Of Angiogenic And Arteriogenic Growth Factors From Biodegradable Poly(Ester Amide) Electrospun Fibers For Therapeutic Angiogenesis, Somiraa S. Said

Electronic Thesis and Dissertation Repository

Therapeutic angiogenesis relies on the delivery of exogenous growth factors to stimulate neovessel formation. However, systemic administration of angiogenic factors results in rapid clearance from the site of interest due to their short biological half-life. In this work, we are reporting controlled delivery of a ‘cocktail’ of growth factors, an angiogenic factor −fibroblast growth factor-2 (FGF2), and an arteriogenic factor −fibroblast growth factor-9 (FGF9), from biodegradable poly(ester amide) (PEA) electrospun fibers towards targeting neovascular formation and maturation. FGF2 and FGF9 were dual loaded into PEA fibers using a mixed blend and emulsion electrospinning technique. Matrigel tube formation and Boyden chamber …

Fractionation Of Cornstalk Into Cellulose And Lignin For The Production Of Sodium Carboxymethyl Cellulose, Tao Shui

Electronic Thesis and Dissertation Repository

This thesis project aimed to fractionate cornstalk into cellulose and lignin, and utilize the crude cornstalk-derived cellulose for the production of sodium carboxymethyl cellulose and the lignin for the sybthesis of bio-based phenol-formaldehyde resole resins as wood adhesives. In this thesis work, cornstalk was efficiently fractionated into crude cellulose and crude lignin in mixed solvents of acetic acid, formic acid and water at a solid/agent ratio of 1:5 (g/mL) at 80-100 °C for 120-240 min. The best conditions for organosolv fractionation of cornstalk among the test conditions were determined as follows: mixed solvent of acetic acid/formic acid/water (3:6:1, v/v/v), HCl …

Studies On Nanocomposite Coating Produced By Laser-Assisted Process To Prevent Silicone Hydrogels From Bio-Fouling, Vishnuvardhana Wuppaladhodi

Electronic Thesis and Dissertation Repository

In this thesis, silver nanoparticles incorporated into polyvinylpyrrolidone (PVP) were deposited on silicone hydrogel to improve the hydrophilicity of the silicone hydrogel and prevent the growth of bacteria. Two different processes were employed to produce Ag nanoparticles: (1) Process-A is a photochemical reduction; (2) Process-B is laser ablation in liquid. Following that, MAPLE process was employed to deposit the Ag-PVP nanocomposites on the surface of silicone hydrogel. A solid-state pulsed laser (Nd:YAG) with a wavelength of 532 nm at a fluence of 50.4 mJ/cm² was used in the MAPLE system to deposit Ag-PVP nanocomposite coating. Our results indicate that …

Production Of Bio-Based Phenol Formaldehyde Foams, Bing Li

Electronic Thesis and Dissertation Repository

Considering the declining non-renewable fossil resources, there is increasing interest in the development of more environmentally conscious, sustainable and cost-effective substitutes for chemical production. Lignin, a main component in lignocellulosic biomass, has been considered to be a potential substitute for petroleum-based phenol due to its phenolic structure.

This PhD dissertation aimed at producing bio-based phenol formaldehyde (BPF) foams using bio-phenols, including but not limited to, kraft lignin (KL), organosolv lignin (OL), hydrolysis lignin (HL), and bio-crude oil from white birth bark. The challenge of the existing process of producing BPF foams is that a low phenol substitution ratio, generally less …

Polymer System And Molding Techniques For Surgical Training Models, Daniel J. Park

Electronic Thesis and Dissertation Repository

Poly(vinyl alcohol) (PVA) hydrogels are used to produce high fidelity models for surgical training applications. PVA hydrogel mechanical properties are developed through the use of a freeze-thaw cycling, physical crosslinking process. The resulting gels exhibit a non-linear elastic modulus which can be tailored to match many tissues of the human body.

Methods for joining PVA hydrogels were investigated to aid in the production of complicated structures that would be difficult to produce in a single step. Bond strength of PVA gels was characterized using a modified peel test. The porosity and degree of crosslinking of the PVA substrate were investigated …

Engineered Quantum Dots For Eva Nanocomposite Films And Tio2 Photocatalysts, Md Abdul Mumin

Electronic Thesis and Dissertation Repository

Light absorbing inorganic nanoparticles in transparent plastics such as poly(ethylene-co-vinyl acetate) (EVA) are of enormous interest in emerging solar materials, including photovoltaic (PV) modules and commercial greenhouse films. Quantum dots (QDs) have the potential to absorb UV light and selectively emit visible light. However, how to stabilize the QDs for long product life spans without "blinking" while enabling their easy integration into polymer systems is lacking. This work examines different approaches for loading mesoporous silica encapsulated QDs into EVA polymer films which can control plant growth in greenhouses or enhance PV panel efficiencies.

Highly luminescent CdS and CdS-ZnS core-shell QDs …

Design And Implementation Of Multi-Responsive Azobenzene Triggers In Self-Immolative And Degradable Polymers, Andrew D. Wong

Electronic Thesis and Dissertation Repository

Self-immolative polymers are a recently developed class of degradable polymers capable of undergoing end-to-end depolymerization following the reaction of their endcaps with appropriate stimuli. Self-immolative materials originated in the field of prodrug chemistry, and evolved into self-immolative oligomers, dendrimers, and most recently, linear polymers. Many stimuli-responsive endcaps have been developed, but typically can only respond to one stimulus. Azobenzenes are a well-known class of stimuli-responsive molecules most commonly used as photoswitches, due to their facile trans-cis isomerization. In addition to their photochemistry, azobenzenes have recently been found to be selectively reduction-sensitive, and are therefore of interest as endcaps …

Investigation And Modeling Of Dip-Coating Process For Dispersions, Mahyar Javidi Soufiani

Electronic Thesis and Dissertation Repository

Dip coating of liquid film deposition on cylindrical substrates is studied using mathematical modeling, numerical simulation and experimental investigation. A mathematical model based on the Landau-Levich approach for dip coating has been developed using the Ellis constitutive equation, for cylindrical geometries, to analyze the effects on the coating thickness of the substrate radius and hydrodynamic behavior for a non-Newtonian fluid. The influence of the viscosity at low shear rates near the surface of the withdrawal film is included in the Ellis model and coating thickness results for Ellis, power law and Newtonian models are compared with experimental data. Good agreement …

Slope Stability Enhancement Of An Upstream Tailings Dam: Laboratory Testing And Numerical Modelling, Yazeed A. Alsharedah

Electronic Thesis and Dissertation Repository

Mine tailings are the byproduct of mining activities, which need to be disposed of once the ore is extracted. They can be disposed of in either dry or wet forms. The latter is most common with the tailings being disposed of in the form of slurry inside retention structures. The retention structure may be a natural, manmade, or built dam, which is the case in most of nowadays mining locations. In this thesis, improving the stability of an upstream tailings dam using soil additives is investigated. The experimental phase of this study involved laboratory tests conducted to characterize mine tailings …

Catalytic Conversion Of Glycerol To Value-Added Chemical Products, Malaya Ranjan Nanda

Electronic Thesis and Dissertation Repository

Rapid expansion of biodiesel industry has generated a huge amount of crude glycerol. This thesis aimed to explore utilization of glycerol for the production of solketal as an oxygenated fuel additive and 1, 2-propanediol as a pre-polymer via catalytic conversion.

The thesis work may be divided into two major parts. In the first part, the thermodynamics and kinetics of the glycerol ketalization for the synthesis of solketal were investigated in a batch reactor. From this information, a continuous-flow process was designed, developed and optimized using pure glycerol. Crude glycerol (13 wt% purity) was successfully upgraded into a purified crude glycerol …

Synthesis, Characterization And Applications Of Lignin-Based Epoxy Resins, Fatemeh Ferdosian

Electronic Thesis and Dissertation Repository

Epoxy resin is one of the most versatile thermosetting polymers with diverse applications. Epoxy resins are mainly produced from the reaction of bisphenol-A (BPA) and epichlorohydrin. The consumption of bisphenol-A is facing growing concerns over its carcinogenic effects and its sustainability. Lignin can be a promising renewable substitute of bisphenol-A in the synthesis of epoxy resins.

In this thesis work, a novel method has been developed for the synthesis of bio-based epoxy resins with reduced side reactions, employing de-polymerized lignin from organosolv lignin (DOL), kraft lignin (DKL) and hydrolysis lignin (DHL) under alkaline condition in the presence of a phase …