Engineering Commons^™

Pin-Wise Loading Optimization And Lattice–To-Core Coupling For Isotopic Management In Light Water Reactors, Hermilo Hernandez Noyola

Doctoral Dissertations

A generalized software capability has been developed for the pin-wise loading optimization of light water reactor (LWR) fuel lattices with the enhanced flexibility of control variables that characterize heterogeneous or blended target pins loaded with non-standard compositions, such as minor actinides (MAs). Furthermore, this study has developed the software coupling to evaluate the performance of optimized lattices outside their reflective boundary conditions and within the realistic three-dimensional core-wide environment of a LWR.

The illustration of the methodologies and software tools developed helps provide a deeper understanding of the behavior of optimized lattices within a full core environment. The practical applications …

Multivariate Optimization Of Neutron Detectors Through Modeling, Martin Rodney Williamson

Doctoral Dissertations

Due to the eminent shortage of 3He, there exists a significant need to develop a new (or optimize an existing) neutron detection system which would reduce the dependency on the current 3He-based detectors for Domestic Nuclear Detection Office (DNDO) applications. The purpose of this research is to develop a novel methodology for optimizing candidate neutron detector designs using multivariate statistical analysis of Monte Carlo radiation transport code (MCNPX) models. The developed methodology allows the simultaneous optimization of multiple detector parameters with respect to multiple response parameters which measure the overall performance of a candidate neutron detector. This is achieved by …

Environmental Impacts To Stream Acidification And Brook Trout Populations In The Great Smoky Mountains National Park, Keil Jason Neff

Doctoral Dissertations

This research supports development of aquatic resource management strategies to address acid deposition in the Great Smoky Mountain National Park (GRSM) by 1) developing relationships between baseflow and stormflow chemical constituents and examining effects of elevation, area, geology, soil, and vegetation on stream chemistry; 2) evaluating physiological condition in brook trout in relation to changes in stream chemistry during stream acidification episodes, and 3) evaluating brook trout metrics with respect to stream chemistry, basin characteristics, and ecologically relevant hydrologic parameters. (1) Stream chemistry was monitored in eight GRSM streams considering basin area, site elevation, Anakeesta geology, soil, and vegetation. Following …

Durability And Fatigue Behavior Of Cip Concrete Connections For Accelerated Bridge Construction, Peng Zhu

Doctoral Dissertations

Continuous longitudinal and transverse U-bar joint connections between flanges of the decked bulb-Ts (DBTs) or between precast panels for accelerated bridge construction are investigated. The procedure for selecting durable closure pour (CP) materials for the connections is discussed firstly. The accelerated construction is quantified as two categories: overnight cure and 7-day cure of CP materials. Candidate materials are selected first based on literature review as well as tests of compressive strength and flow and workability. Then, performance criteria for selecting durable CP materials for both categories are developed based on durability tests of selected candidate materials. These durability tests include …

Adaptive Voltage Control Methods Using Distributed Energy Resources, Huijuan Li

Doctoral Dissertations

Distributed energy resources (DE) with power electronics interfaces and logic control using local measurements are capable of providing reactive power related to ancillary system services. In particular, local voltage regulation has drawn much attention in regards to power system reliability and voltage stability, especially from past major cascading outages. This dissertation addresses the challenges of controlling the DEs to regulate the local voltage in distribution systems.

First, an adaptive voltage control method has been proposed to dynamically modify the control parameters of a single DE to respond to system changes such that the ideal response can be achieved. Theoretical analysis …

Characterization And Fabrication Of Active Matrix Thin Film Transistors For An Addressable Microfluidic Electrowetting Channel Device, Seyeoul Kwon

Doctoral Dissertations

The characterization and fabrication of active matrix thin film transistors (TFTs) has been studied for an addressable microfluidic electrowetting channel device as application. A new transparent semiconductor material, Amorphous Indium Gallium Zinc Oxide (a-IGZO), is used for TFT, which shows high electrical performance rather than amorphous silicon based TFT; higher mobility and even higher transparency. The purpose of this dissertation is to optimize each TFT process including the optimization of a-IGZO properties to achieve robust device for application. To minimize hysteresis of TFT curves, the gate dielectric is discussed extensively in this dissertation. By optimizing gas ratio of NH3SiH4, it …

Dependence Of Microstructure Evolution, Texture, And Mechanical Behavior Of A Mg Alloy On Thermo-Mechanical Input During Friction Stir Processing, Zhenzhen Yu

Doctoral Dissertations

In this thesis, the relationship among friction stir processing (FSP) parameters, microstructure evolution, texture development, and mechanical hehavior of AZ31B Mg alloy was investigated.

First of all, in order to reveal the correlation among the deformation conditions, dynamic recrystallization (DRX) mechanisms, and microstructure evolution in the Mg alloy, hot compression tests at a wide range of Zener-Hollomon parameter (Z) values were conducted. Through optical microscopic examination, it was found out that above a critical Z value, twinning influences the DRX process resulting in a more effective grain refinement, which is manifested in a significant change in the slope of the …

Thin Film Combinatorial Synthesis Of Advanced Scintillation Materials, Jonathan Daniel Peak

Doctoral Dissertations

The development and application of a combinatorial sputtering thin film technique to screen potential scintillation material systems was investigated. The technique was first benchmarked by exploring the binary lutetium oxide-silicon oxide material system, which successfully identified the luminescence phases of the system, Lu2SiO5 (LSO) and Lu2Si2O7 (LPS). The second application was to optimize the activator concentration in cerium doped LSO. The successfully optimized cerium concentration in the thin film LSO of 0.34 atomic percent was much greater than the standard cerium concentration in single crystal LSO. This lead to an intensive study based on temperature dependent steady-state and lifetime photoluminescence …

Energetics And Kinetics Of Dislocation Initiation In The Stressed Volume At Small Scales, Tianlei Li

Doctoral Dissertations

Instrumented nanoindentation techniques have been widely used in characterizing mechanical behavior of materials in small length scales. For defect-free single crystals under nanoindentation, the onset of elastic-plastic transition is often shown by a sudden displacement burst in the measured load-displacement curve. It is believed to result from the homogeneous dislocation nucleation because the maximum shear stress at the pop-in load approaches the theoretical strength of the material and because statistical measurements agree with a thermally activated process of homogeneous dislocation nucleation. For single crystals with defects, the pop-in is believed to result from the sudden motion of pre-existing dislocations or …

Molecular-Level Modeling Of Proton Transport In Aqueous Systems And Polymer Electrolyte Membranes: A Reactive Molecular Dynamics Study, Myvizhi Esai Selvan

Doctoral Dissertations

Proton exchange membrane (PEM) fuel cells are an eco-friendly power source that has great potential to reduce our oil dependence for our stationary and transportation applications. In order to make PEM fuel cells an economically viable option, further effort is needed to improve proton conduction under wide operating conditions and reduce the cost of production. Design and synthesis of novel membranes that have superior characteristics require a fundamental molecular-level understanding of the relationship between the polymer chemistry, water content and proton conduction. The performance of a fuel cell is influenced by the electrochemical and molecular/proton transport processes that occur at …

Multi-Modular Integral Pressurized Water Reactor Control And Operational Reconfiguration For A Flow Control Loop, Sergio Ricardo Pereira Perillo

Doctoral Dissertations

This dissertation focused on the IRIS design since this will likely be one of the designs of choice for future deployment in the U.S and developing countries. With a net 335 MWe output IRIS novel design falls in the “medium” size category and it is a potential candidate for the so called modular reactors, which may be appropriate for base load electricity generation, especially in regions with smaller electricity grids, but especially well suited for more specialized non-electrical energy applications such as district heating and process steam for desalination. The first objective of this dissertation is to evaluate and quantify …

Management Tool For Assessment Of Alternative Fuel Cycles, Jeffrey R. Preston

Doctoral Dissertations

A new approach to fuel cycle uncertainty analysis and optimization is presented that combines reactor physics information, spent fuel management, and economic forecasting, which may be used to investigate effects of decisions in the design of advanced nuclear fuel cycles. The Matlab-based simulation includes isotopic mass and integral decay heat data produced by reactor physics codes in the SCALE package (SAS2, ORIGEN-ARP, and ORIGEN-S). Reactor physics data for Light Water Reactor (LWR), and metal- and oxide-fueled Liquid Metal-cooled Fast Burner Reactor (LMFBR) designs are stored in databases that the code uses as needed. Detailed models of the once through and …

Boiling Water Reactor Core Simulation With Generalized Isotopic Inventory Tracking For Actinide Management, Jack Douglas Galloway

Doctoral Dissertations

The computational ability to accurately simulate boiling water reactor operation under the full range of standard steady-state operation, along with the capability to fully track the isotopic distribution of any fueled region in any location in the core has been developed. This new three-dimensional node-by-node capability can help designers track, for example, a full suite of minor and major actinides, fission products, and even light elements that result from depletion, decay, or transmutations. This isotopic tracking capability is not restricted to BWRs and can be employed in the modeling of PWRs, CANDUs, and other reactor types that can be modeled …

Study Of Deformation Behavior Of Nanocrystalline Nickel Using Nanoindentation Techniques, Changli Wang

Doctoral Dissertations

Nanocrystalline materials with grain size less than 100 nm have been receiving much attention because of their unparallel properties compared with their microcrystalline counterparts. Because of its high hardness, nanocrystalline nickel has been used for MEMS. Long term thermomechnical properties and deformation mechanism at both ambient and elevated temperatures need to be evaluated which is vital for reliability of its applications as structural material.

In this thesis, nanoindentation creep of nanocrystalline nickel with an as-deposited grain size of 14 nm was characterized at elevated temperatures. The nanoindentation creep rate was observed to scale with temperature and applied load (or stress), …

Scene Segmentation And Object Classification For Place Recognition, Chang Cheng

Doctoral Dissertations

This dissertation tries to solve the place recognition and loop closing problem in a way similar to human visual system. First, a novel image segmentation algorithm is developed. The image segmentation algorithm is based on a Perceptual Organization model, which allows the image segmentation algorithm to ‘perceive’ the special structural relations among the constituent parts of an unknown object and hence to group them together without object-specific knowledge.

Then a new object recognition method is developed. Based on the fairly accurate segmentations generated by the image segmentation algorithm, an informative object description that includes not only the appearance (colors and …

Effects Of 2000-2050 Global Climate Change On Ozone And Particulate Matter Air Quality In The United States Using Models-3/Cmaq System, Yun-Fat Lam

Doctoral Dissertations

The Models-3/Community Multi-scale Air Quality modeling system (CMAQ), coupled with Goddard Institute for Space Studies (GISS) atmospheric General Circulation Model (GCM), fifth Generation Mesoscale Model system (MM5), and Goddard Earth Observing System-CHEMistry (GEOS-Chem), was used to simulate atmospheric concentration of ozone and particulate matter over the continental United States 12-km and 36-km (CONUS) domains at year 2000 and year 2050. In the study, GISS GCM model outputs interfaced with MM5 were utilized to supply the current and future meteorological conditions for CMAQ. The conventional CMAQ profile initial and boundary conditions were replaced by time-varied and layer-varied GEOS-Chem outputs. The future …

Matching Vehicle License Plate Numbers Using License Plate Recognition And Text Mining Techniques, Francisco Moraes Oliveira Neto

Doctoral Dissertations

License plate recognition (LPR) technology has been widely applied in many different transportation applications such as enforcement, vehicle monitoring and access control. In most applications involving enforcement (e.g. cashless toll collection, congestion charging) and access control (e.g. car parking) a plate is recognized at one location (or checkpoint) and compared against a list of authorized vehicles. In this research I dealt with applications where a vehicle is detected at two locations and there is no list of reference for vehicle identification.

There seems to be very little effort in the past to exploit all information generated by LPR systems. In …

Adaptive Performance And Power Management In Distributed Computing Systems, Ming Chen

Doctoral Dissertations

The complexity of distributed computing systems has raised two unprecedented challenges for system management. First, various customers need to be assured by meeting their required service-level agreements such as response time and throughput. Second, system power consumption must be controlled in order to avoid system failures caused by power capacity overload or system overheating due to increasingly high server density. However, most existing work, unfortunately, either relies on open-loop estimations based on off-line profiled system models, or evolves in a more ad hoc fashion, which requires exhaustive iterations of tuning and testing, or oversimplifies the problem by ignoring the coupling …

A High -Temperature, High-Voltage, Fast Response Time Linear Regulator In 0.8um Bcd-On-Soi, Chia Hung Su

Doctoral Dissertations

The sale of hybrid electric vehicles (HEVs) has increased tenfold from the year 2001 to 2009 [1]. With this the demand for high temperature electronics has also increased dramatically making, high temperature electronics for HEV applications desirable in the engine compartment, power train, and brakes where the ambient temperature normally exceeds 150°C. Power converters (i.e. DC-DC converter, DC-AC inverter) inside the HEVs require gate drivers to control the power switches. An integrated gate driver circuit has been realized in 0.8-um BCD-on-SOI process. This gate driver IC needs a step-down voltage regulator to convert the unregulated high input DC voltage (VDDH) …

Laser Textured Calcium Phosphate Bio-Ceramic Coatings On Ti-6al-4v For Improved Wettability And Bone Cell Compatibility, Sameer R. Paital

Doctoral Dissertations

The interaction at the surfaces of load bearing implant biomaterials with tissues and physiological fluids is an area of crucial importance to all kinds of medical technologies. To achieve the best clinical outcome and restore the function of the diseased tissue, several surface engineering strategies have been discussed by scientific community throughout the world. In the current work, we are focusing on one such technique based on laser surface engineering to achieve the appropriate surface morphology and surface chemistry. Here by using a pulsed and continuous wave laser direct melting techniques we synthesize three dimensional textured surfaces of calcium phosphate …

Deformation Study Of Nanocrystalline Ni-Fe Alloy Using Synchrotron Diffraction, Li Li

Doctoral Dissertations

This dissertation addresses two critical issues in the deformation of nc metals and alloys: (1) A stress-induced genuine grain growth after the plastic deformation rather than just a change of the grain shape; (2) A systematically quantitative study of micrsostructural evolution during the plastic deformation.

These two critical issues point to the deformation of nc materials with the average-grain sizes within the range of 10 to 50 nm, which is the most interesting and controversial region in the current time. The current study provides a systematic and detailed microstructural evolution for this region, which is definitely beneficial for the investigation …

An Effective Approach To Nonparametric Quickest Detection And Its Decentralized Realization, Dayu Yang

Doctoral Dissertations

This dissertation focuses on the study of nonparametric quickest detection and its decentralized implementation in a distributed environment. Quickest detection schemes are geared toward detecting a change in the state of a data stream or a real-time process. Classical quickest detection schemes invariably assume knowledge of the pre-change and post-change distributions that may not be available in many applications. A distribution free nonparametric quickest detection procedure is presented based on a novel distance measure, referred to as the Q-Q distance calculated from the Quantile-Quantile plot. Theoretical analysis of the distance measure and detection procedure is presented to justify the proposed …

Microfluidic Manipulation By Ac Electrothermal Effect, Meng Lian

Doctoral Dissertations

AC Electrokinetics (ACEK) has attracted much research interest for microfluidic manipulation for the last few years. It shows great potential for functions such as micropumping, mixing and concentrating particles. Most of current ACEK research focuses on AC electroosmosis (ACEO), which is limited to solutions with conductivity less than 0.02 S/m, excluding most biofluidic applications. To solve for this problem, this dissertation seeks to apply AC electrothermal (ACET) effect to manipulate conductive fluids and particles within, and it is among the first demonstration of ACET devices, a particle trap and an ACET micropump. The experiments used fluids at a conductivity of …

A Novel Technique For Ctis Image-Reconstruction, Mitchel Dewayne Horton

Doctoral Dissertations

Computed tomography imaging spectrometer (CTIS) technology is introduced and its use is discussed. An iterative method is presented for CTIS image-reconstruction in the presence of both photon noise in the image and post-detection Gaussian system noise. The new algorithm assumes the transfer matrix of the system has a particular structure. Error analysis, performance evaluation, and parallelization of the algorithm is done. Complexity analysis is performed for the proof of concept code developed. Future work is discussed relating to potential improvements to the algorithm.

An intuitive explanation for the success of the new algorithm is that it reformulates the image reconstruction …

Polymeric Microsensors For Intraoperative Contact Pressure Measurement, Emily R. Pritchard

Doctoral Dissertations

Biocompatible sensors have been demonstrated using traditional microfabrication techniques modified for polymer substrates and utilize only materials suitable for implantation or bodily contact. Sensor arrays for the measurement of the load condition of polyethylene spacers in the total knee arthroplasty (TKA) prosthesis have been developed. Arrays of capacitive sensors are used to determine the three-dimensional strain within the polyethylene prosthesis component. Data from these sensors can be used to give researchers a better understanding of component motion, loading, and wear phenomena for a large range of activities. This dissertation demonstrates both analytically and experimentally the fabrication of these sensor arrays …

The Development Of A Parameterized Scatter Removal Algorithm For Nuclear Materials Identification System Imaging, Brandon Robert Grogan

Doctoral Dissertations

This dissertation presents a novel method for removing scattering effects from Nuclear Materials Identification System (NMIS) imaging. The NMIS uses fast neutron radiography to generate images of the internal structure of objects non-intrusively. If the correct attenuation through the object is measured, the positions and macroscopic cross-sections of features inside the object can be determined. The cross sections can then be used to identify the materials and a 3D map of the interior of the object can be reconstructed. Unfortunately, the measured attenuation values are always too low because scattered neutrons contribute to the unattenuated neutron signal. Previous efforts to …

Improving Ozone Sip Modeling In Complex Terrain At A Fine Grid Resolution, Yunhee Kim

Doctoral Dissertations

Meteorological variables such as temperature, wind speed, wind directions, and Planetary Boundary Layer (PBL) heights have critical implications for air quality simulations. Sensitivity simulations with five different PBL schemes associated with three different Land Surface Models (LSMs) were conducted to examine the impact of meteorological variables on the predicted ozone concentrations using the Community Multiscale Air Quality (CMAQ) version 4.5 with local perspective. Additionally, the nudging analysis for winds was adopted with three different coefficients to improve the wind fields in the complex terrain at 4-km grid resolution. The simulations focused on complex terrain having valley and mountain areas for …

Theoretical Models For Wall Injected Duct Flows, Tony Saad

Doctoral Dissertations

This dissertation is concerned with the mathematical modeling of the flow in a porous cylinder with a focus on applications to solid rocket motors. After discussing the historical development and major contributions to the understanding of wall injected flows, we present an inviscid rotational model for solid and hybrid rockets with arbitrary headwall injection. Then, we address the problem of pressure integration and find that for a given divergence free velocity field, unless the vorticity transport equation is identically satisfied, one cannot find an analytic expression for the pressure by direct integration of the Navier-Stokes equations. This is followed by …

Investigation Of The Processing, Structure And Properties Of Poly(Phenylene Sulfide) (Pps) Melt Spun Fibers, Prabhakar Gulgunje

Doctoral Dissertations

Numerous publications are available on the structure and properties correlation of fibers spun from polymers with flexible chains such as polyethylene terephthalate (PET), nylon, polypropylene. Also considerable amount of work is reported in fibers spun from rigid rod polymers like poly(p-phenylene terephthalamide) due to their value in high performance fibers category. However, very limited literature is available on the structure-properties relationship in fibers manufactured from poly(phenylene sulfide) (PPS), a high performance polymer which possesses chain flexibility between above two classes of polymers. A few researchers have studied crystallization kinetics and the fibers by extruding the polymer using capillary rheometers. However, …

Merging Data Sources To Predict Remaining Useful Life – An Automated Method To Identify Prognostic Parameters, Jamie Baalis Coble

Doctoral Dissertations

The ultimate goal of most prognostic systems is accurate prediction of the remaining useful life (RUL) of individual systems or components based on their use and performance. This class of prognostic algorithms is termed Degradation-Based, or Type III Prognostics. As equipment degrades, measured parameters of the system tend to change; these sensed measurements, or appropriate transformations thereof, may be used to characterize degradation. Traditionally, individual-based prognostic methods use a measure of degradation to make RUL estimates. Degradation measures may include sensed measurements, such as temperature or vibration level, or inferred measurements, such as model residuals or physics-based model predictions. Often, …